Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 165
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 02 2月, 2018 2 次提交
  3. 25 1月, 2018 2 次提交
    • S
      drm/i915/guc: Fix lockdep due to log relay channel handling under struct_mutex · 70deeadd
      由 Sagar Arun Kamble 提交于 
      This patch fixes lockdep issue due to circular locking dependency of
struct_mutex, i_mutex_key, mmap_sem, relay_channels_mutex.
For GuC log relay channel we create debugfs file that requires i_mutex_key
lock and we are doing that under struct_mutex. So we introduced newer
dependency as:
    &dev->struct_mutex --> &sb->s_type->i_mutex_key#3 --> &mm->mmap_sem
However, there is dependency from mmap_sem to struct_mutex. Hence we
separate the relay create/destroy operation from under struct_mutex.
Also added runtime check of relay buffer status.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc6-CI-Patchwork_7614+ #1 Not tainted
------------------------------------------------------
debugfs_test/1388 is trying to acquire lock:
 (&dev->struct_mutex){+.+.}, at: [<00000000d5e1d915>] i915_mutex_lock_interruptible+0x47/0x130 [i915]

but task is already holding lock:
 (&mm->mmap_sem){++++}, at: [<0000000029a9c131>] __do_page_fault+0x106/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&mm->mmap_sem){++++}:
       _copy_to_user+0x1e/0x70
       filldir+0x8c/0xf0
       dcache_readdir+0xeb/0x160
       iterate_dir+0xdc/0x140
       SyS_getdents+0xa0/0x130
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #2 (&sb->s_type->i_mutex_key#3){++++}:
       start_creating+0x59/0x110
       __debugfs_create_file+0x2e/0xe0
       relay_create_buf_file+0x62/0x80
       relay_late_setup_files+0x84/0x250
       guc_log_late_setup+0x4f/0x110 [i915]
       i915_guc_log_register+0x32/0x40 [i915]
       i915_driver_load+0x7b6/0x1720 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #1 (relay_channels_mutex){+.+.}:
       relay_open+0x12c/0x2b0
       intel_guc_log_runtime_create+0xab/0x230 [i915]
       intel_guc_init+0x81/0x120 [i915]
       intel_uc_init+0x29/0xa0 [i915]
       i915_gem_init+0x182/0x530 [i915]
       i915_driver_load+0xaa9/0x1720 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #0 (&dev->struct_mutex){+.+.}:
       __mutex_lock+0x81/0x9b0
       i915_mutex_lock_interruptible+0x47/0x130 [i915]
       i915_gem_fault+0x201/0x790 [i915]
       __do_fault+0x15/0x70
       __handle_mm_fault+0x677/0xdc0
       handle_mm_fault+0x14f/0x2f0
       __do_page_fault+0x2d1/0x560
       page_fault+0x4c/0x60

other info that might help us debug this:

Chain exists of:
  &dev->struct_mutex --> &sb->s_type->i_mutex_key#3 --> &mm->mmap_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&sb->s_type->i_mutex_key#3);
                               lock(&mm->mmap_sem);
  lock(&dev->struct_mutex);

 *** DEADLOCK ***

1 lock held by debugfs_test/1388:
 #0:  (&mm->mmap_sem){++++}, at: [<0000000029a9c131>] __do_page_fault+0x106/0x560

stack backtrace:
CPU: 2 PID: 1388 Comm: debugfs_test Not tainted 4.15.0-rc6-CI-Patchwork_7614+ #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
Call Trace:
 dump_stack+0x5f/0x86
 print_circular_bug.isra.18+0x1d0/0x2c0
 __lock_acquire+0x14ae/0x1b60
 ? lock_acquire+0xaf/0x200
 lock_acquire+0xaf/0x200
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 __mutex_lock+0x81/0x9b0
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? __pm_runtime_resume+0x4f/0x80
 i915_gem_fault+0x201/0x790 [i915]
 __do_fault+0x15/0x70
 ? _raw_spin_unlock+0x29/0x40
 __handle_mm_fault+0x677/0xdc0
 handle_mm_fault+0x14f/0x2f0
 __do_page_fault+0x2d1/0x560
 ? page_fault+0x36/0x60
 page_fault+0x4c/0x60

v2: Added lock protection to guc->log.runtime.relay_chan (Chris)
    Fixed locking inside guc_flush_logs uncovered by new lockdep.

v3: Locking guc_read_update_log_buffer entirely with relay_lock. (Chris)
    Prepared intel_guc_init_early. Moved relay_lock inside relay_create
    relay_destroy, relay_file_create, guc_read_update_log_buffer. (Michal)
    Removed struct_mutex lock around guc_log_flush and removed usage
    of guc_log_has_relay() from runtime_create path as it needs
    struct_mutex lock.

v4: Handle NULL relay sub buffer pointer earlier in read_update_log_buffer
    (Chris). Fixed comment suffix **/. (Michal)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104693
Testcase: igt/debugfs_test/read_all_entries # with enable_guc=1 and guc_log_level=1
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-3-git-send-email-sagar.a.kamble@intel.com
      70deeadd
    • S
      drm/i915/guc: Enable interrupts before resuming GuC during runtime resume · 1ed21cb4
      由 Sagar Arun Kamble 提交于 
      GuC log streaming needs interrupts enabled prior to GuC resume but
runtime pm interrupt setup was happening post GuC resume. Fix it.
While at it, fix the unwinding of steps in the runtime suspend path.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-2-git-send-email-sagar.a.kamble@intel.com
      1ed21cb4
  5. 20 1月, 2018 1 次提交
  7. 17 1月, 2018 1 次提交
  9. 22 12月, 2017 3 次提交
  11. 19 12月, 2017 1 次提交
  13. 18 12月, 2017 1 次提交
  15. 16 12月, 2017 1 次提交
  17. 14 12月, 2017 2 次提交
    • M
      drm/i915/guc: Extract guc_init from guc_init_hw · 61b5c158
      由 Michał Winiarski 提交于 
      After GPU reset, GuC HW needs to be reinitialized (with FW reload).
Unfortunately, we're doing some extra work there (mostly allocating stuff),
work that can be moved to guc_init and called once at driver load time.

As a side effect we're no longer hitting an assert in
i915_ggtt_enable_guc on suspend/resume.

v2: Do not duplicate disable_communication / reset_guc_interrupts
v3: Add proper teardown after rebase

References: 04f7b24e ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions")
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com
      61b5c158
    • M
      drm/i915/guc: Move GuC workqueue allocations outside of the mutex · 3176ff49
      由 Michał Winiarski 提交于 
      This gets rid of the following lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc2-CI-Patchwork_7428+ #1 Not tainted
------------------------------------------------------
debugfs_test/1351 is trying to acquire lock:
 (&dev->struct_mutex){+.+.}, at: [<000000009d90d1a3>] i915_mutex_lock_interruptible+0x47/0x130 [i915]

but task is already holding lock:
 (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&mm->mmap_sem){++++}:
       __might_fault+0x63/0x90
       _copy_to_user+0x1e/0x70
       filldir+0x8c/0xf0
       dcache_readdir+0xeb/0x160
       iterate_dir+0xe6/0x150
       SyS_getdents+0xa0/0x130
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #5 (&sb->s_type->i_mutex_key#5){++++}:
       lockref_get+0x9/0x20

-> #4 ((completion)&req.done){+.+.}:
       wait_for_common+0x54/0x210
       devtmpfs_create_node+0x130/0x150
       device_add+0x5ad/0x5e0
       device_create_groups_vargs+0xd4/0xe0
       device_create+0x35/0x40
       msr_device_create+0x22/0x40
       cpuhp_invoke_callback+0xc5/0xbf0
       cpuhp_thread_fun+0x167/0x210
       smpboot_thread_fn+0x17f/0x270
       kthread+0x173/0x1b0
       ret_from_fork+0x24/0x30

-> #3 (cpuhp_state-up){+.+.}:
       cpuhp_issue_call+0x132/0x1c0
       __cpuhp_setup_state_cpuslocked+0x12f/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_writeback_init+0x3a/0x5c
       start_kernel+0x393/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #2 (cpuhp_state_mutex){+.+.}:
       __mutex_lock+0x81/0x9b0
       __cpuhp_setup_state_cpuslocked+0x4b/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_alloc_init+0x1f/0x26
       start_kernel+0x139/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #1 (cpu_hotplug_lock.rw_sem){++++}:
       cpus_read_lock+0x34/0xa0
       apply_workqueue_attrs+0xd/0x40
       __alloc_workqueue_key+0x2c7/0x4e1
       intel_guc_submission_init+0x10c/0x650 [i915]
       intel_uc_init_hw+0x29e/0x460 [i915]
       i915_gem_init_hw+0xca/0x290 [i915]
       i915_gem_init+0x115/0x3a0 [i915]
       i915_driver_load+0x9a8/0x16c0 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #0 (&dev->struct_mutex){+.+.}:
       lock_acquire+0xaf/0x200
       __mutex_lock+0x81/0x9b0
       i915_mutex_lock_interruptible+0x47/0x130 [i915]
       i915_gem_fault+0x201/0x760 [i915]
       __do_fault+0x15/0x70
       __handle_mm_fault+0x85b/0xe40
       handle_mm_fault+0x14f/0x2f0
       __do_page_fault+0x2d1/0x560
       page_fault+0x22/0x30

other info that might help us debug this:

Chain exists of:
  &dev->struct_mutex --> &sb->s_type->i_mutex_key#5 --> &mm->mmap_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&sb->s_type->i_mutex_key#5);
                               lock(&mm->mmap_sem);
  lock(&dev->struct_mutex);

 *** DEADLOCK ***

1 lock held by debugfs_test/1351:
 #0:  (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

stack backtrace:
CPU: 2 PID: 1351 Comm: debugfs_test Not tainted 4.15.0-rc2-CI-Patchwork_7428+ #1
Hardware name:                  /NUC6i5SYB, BIOS SYSKLi35.86A.0057.2017.0119.1758 01/19/2017
Call Trace:
 dump_stack+0x5f/0x86
 print_circular_bug+0x230/0x3b0
 check_prev_add+0x439/0x7b0
 ? lockdep_init_map_crosslock+0x20/0x20
 ? unwind_get_return_address+0x16/0x30
 ? __lock_acquire+0x1385/0x15a0
 __lock_acquire+0x1385/0x15a0
 lock_acquire+0xaf/0x200
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 __mutex_lock+0x81/0x9b0
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? __pm_runtime_resume+0x4f/0x80
 i915_gem_fault+0x201/0x760 [i915]
 __do_fault+0x15/0x70
 __handle_mm_fault+0x85b/0xe40
 handle_mm_fault+0x14f/0x2f0
 __do_page_fault+0x2d1/0x560
 page_fault+0x22/0x30
RIP: 0033:0x7f98d6f49116
RSP: 002b:00007ffd6ffc3278 EFLAGS: 00010283
RAX: 00007f98d39a2bc0 RBX: 0000000000000000 RCX: 0000000000001680
RDX: 0000000000001680 RSI: 00007ffd6ffc3400 RDI: 00007f98d39a2bc0
RBP: 00007ffd6ffc33a0 R08: 0000000000000000 R09: 00000000000005a0
R10: 000055e847c2a830 R11: 0000000000000002 R12: 0000000000000001
R13: 000055e847c1d040 R14: 00007ffd6ffc3400 R15: 00007f98d6752ba0

v2: Init preempt_work unconditionally (Chris)
v3: Mention that we need the enable_guc=1 for lockdep splat (Chris)

Testcase: igt/debugfs_test/read_all_entries # with i915.enable_guc=1
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-2-michal.winiarski@intel.com
      3176ff49
  19. 13 12月, 2017 1 次提交
  21. 12 12月, 2017 1 次提交
  23. 06 12月, 2017 1 次提交
  25. 01 12月, 2017 2 次提交
  27. 28 11月, 2017 2 次提交
  29. 22 11月, 2017 1 次提交
    • T
      drm/i915/pmu: Expose a PMU interface for perf queries · b46a33e2
      由 Tvrtko Ursulin 提交于 
      From: Chris Wilson <chris@chris-wilson.co.uk>
From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>

The first goal is to be able to measure GPU (and invidual ring) busyness
without having to poll registers from userspace. (Which not only incurs
holding the forcewake lock indefinitely, perturbing the system, but also
runs the risk of hanging the machine.) As an alternative we can use the
perf event counter interface to sample the ring registers periodically
and send those results to userspace.

Functionality we are exporting to userspace is via the existing perf PMU
API and can be exercised via the existing tools. For example:

  perf stat -a -e i915/rcs0-busy/ -I 1000

Will print the render engine busynnes once per second. All the performance
counters can be enumerated (perf list) and have their unit of measure
correctly reported in sysfs.

v1-v2 (Chris Wilson):

v2: Use a common timer for the ring sampling.

v3: (Tvrtko Ursulin)
 * Decouple uAPI from i915 engine ids.
 * Complete uAPI defines.
 * Refactor some code to helpers for clarity.
 * Skip sampling disabled engines.
 * Expose counters in sysfs.
 * Pass in fake regs to avoid null ptr deref in perf core.
 * Convert to class/instance uAPI.
 * Use shared driver code for rc6 residency, power and frequency.

v4: (Dmitry Rogozhkin)
 * Register PMU with .task_ctx_nr=perf_invalid_context
 * Expose cpumask for the PMU with the single CPU in the mask
 * Properly support pmu->stop(): it should call pmu->read()
 * Properly support pmu->del(): it should call stop(event, PERF_EF_UPDATE)
 * Introduce refcounting of event subscriptions.
 * Make pmu.busy_stats a refcounter to avoid busy stats going away
   with some deleted event.
 * Expose cpumask for i915 PMU to avoid multiple events creation of
   the same type followed by counter aggregation by perf-stat.
 * Track CPUs getting online/offline to migrate perf context. If (likely)
   cpumask will initially set CPU0, CONFIG_BOOTPARAM_HOTPLUG_CPU0 will be
   needed to see effect of CPU status tracking.
 * End result is that only global events are supported and perf stat
   works correctly.
 * Deny perf driver level sampling - it is prohibited for uncore PMU.

v5: (Tvrtko Ursulin)

 * Don't hardcode number of engine samplers.
 * Rewrite event ref-counting for correctness and simplicity.
 * Store initial counter value when starting already enabled events
   to correctly report values to all listeners.
 * Fix RC6 residency readout.
 * Comments, GPL header.

v6:
 * Add missing entry to v4 changelog.
 * Fix accounting in CPU hotplug case by copying the approach from
   arch/x86/events/intel/cstate.c. (Dmitry Rogozhkin)

v7:
 * Log failure message only on failure.
 * Remove CPU hotplug notification state on unregister.

v8:
 * Fix error unwind on failed registration.
 * Checkpatch cleanup.

v9:
 * Drop the energy metric, it is available via intel_rapl_perf.
   (Ville Syrjälä)
 * Use HAS_RC6(p). (Chris Wilson)
 * Handle unsupported non-engine events. (Dmitry Rogozhkin)
 * Rebase for intel_rc6_residency_ns needing caller managed
   runtime pm.
 * Drop HAS_RC6 checks from the read callback since creating those
   events will be rejected at init time already.
 * Add counter units to sysfs so perf stat output is nicer.
 * Cleanup the attribute tables for brevity and readability.

v10:
 * Fixed queued accounting.

v11:
 * Move intel_engine_lookup_user to intel_engine_cs.c
 * Commit update. (Joonas Lahtinen)

v12:
 * More accurate sampling. (Chris Wilson)
 * Store and report frequency in MHz for better usability from
   perf stat.
 * Removed metrics: queued, interrupts, rc6 counters.
 * Sample engine busyness based on seqno difference only
   for less MMIO (and forcewake) on all platforms. (Chris Wilson)

v13:
 * Comment spelling, use mul_u32_u32 to work around potential GCC
   issue and somne code alignment changes. (Chris Wilson)

v14:
 * Rebase.

v15:
 * Rebase for RPS refactoring.

v16:
 * Use the dynamic slot in the CPU hotplug state machine so that we are
   free to setup our state as multi-instance. Previously we were re-using
   the CPUHP_AP_PERF_X86_UNCORE_ONLINE slot which is neither used as
   multi-instance, nor owned by our driver to start with.
 * Register the CPU hotplug handlers after the PMU, otherwise the callback
   will get called before the PMU is initialized which can end up in
   perf_pmu_migrate_context with an un-initialized base.
 * Added workaround for a probable bug in cpuhp core.

v17:
 * Remove workaround for the cpuhp bug.

v18:
 * Rebase for drm_i915_gem_engine_class getting upstream before us.

v19:
 * Rebase. (trivial)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121181852.16128-2-tvrtko.ursulin@linux.intel.com
      b46a33e2
  31. 21 11月, 2017 5 次提交
  33. 20 11月, 2017 1 次提交
  35. 18 11月, 2017 1 次提交
  37. 15 11月, 2017 3 次提交
  39. 14 11月, 2017 1 次提交
  41. 13 11月, 2017 1 次提交
  43. 12 11月, 2017 1 次提交
  45. 11 11月, 2017 3 次提交
    • C
      drm/i915/selftests: Yet another forgotten mock_i915->mm initialiser · 9c52d1c8
      由 Chris Wilson 提交于 
      Move all of the i915->mm initialisation to a private function that can
be reused by the mock i915 device to save forgetting any more steps.

For example,
<7>[ 1542.046332] [IGT] drv_selftest: starting subtest mock_objects
<4>[ 1542.123924] Setting dangerous option mock_selftests - tainting kernel
<6>[ 1542.167941] i915: Performing mock selftests with st_random_seed=0x246f5ab5 st_timeout=1000
<4>[ 1542.178012] INFO: trying to register non-static key.
<4>[ 1542.178027] the code is fine but needs lockdep annotation.
<4>[ 1542.178032] turning off the locking correctness validator.
<4>[ 1542.178041] CPU: 3 PID: 6008 Comm: kworker/3:7 Tainted: G     U          4.14.0-rc8-CI-CI_DRM_3332+ #1
<4>[ 1542.178049] Hardware name:                  /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017
<4>[ 1542.178144] Workqueue: events __i915_gem_free_work [i915]
<4>[ 1542.178152] Call Trace:
<4>[ 1542.178163]  dump_stack+0x68/0x9f
<4>[ 1542.178170]  register_lock_class+0x3fd/0x580
<4>[ 1542.178177]  ? unwind_next_frame+0x14/0x20
<4>[ 1542.178184]  ? __save_stack_trace+0x73/0xd0
<4>[ 1542.178191]  __lock_acquire+0xa4/0x1b00
<4>[ 1542.178254]  ? __i915_gem_free_work+0x28/0xa0 [i915]
<4>[ 1542.178261]  ? __lock_acquire+0x4ab/0x1b00
<4>[ 1542.178268]  lock_acquire+0xb0/0x200
<4>[ 1542.178273]  ? lock_acquire+0xb0/0x200
<4>[ 1542.178336]  ? __i915_gem_free_work+0x28/0xa0 [i915]
<4>[ 1542.178344]  _raw_spin_lock+0x32/0x50
<4>[ 1542.178405]  ? __i915_gem_free_work+0x28/0xa0 [i915]
<4>[ 1542.178468]  __i915_gem_free_work+0x28/0xa0 [i915]
<4>[ 1542.178476]  process_one_work+0x221/0x650
<4>[ 1542.178483]  worker_thread+0x4e/0x3c0
<4>[ 1542.178489]  kthread+0x114/0x150
<4>[ 1542.178494]  ? process_one_work+0x650/0x650
<4>[ 1542.178499]  ? kthread_create_on_node+0x40/0x40
<4>[ 1542.178506]  ret_from_fork+0x27/0x40

v2: Fish out i915->mm.object_stat_lock which was being inited over in
i915_drv.c (Matthew)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110232447.21618-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
      9c52d1c8
    • C
      drm/i915: Record the default hw state after reset upon load · d2b4b979
      由 Chris Wilson 提交于 
      Take a copy of the HW state after a reset upon module loading by
executing a context switch from a blank context to the kernel context,
thus saving the default hw state over the blank context image.
We can then use the default hw state to initialise any future context,
ensuring that each starts with the default view of hw state.

v2: Unmap our default state from the GTT after stealing it from the
context. This should stop us from accidentally overwriting it via the
GTT (and frees up some precious GTT space).

Testcase: igt/gem_ctx_isolation
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-7-chris@chris-wilson.co.uk
      d2b4b979
    • C
      drm/i915: Inline intel_modeset_gem_init() · d378a3ef
      由 Chris Wilson 提交于 
      intel_modeset_gem_init() now only sets up the legacy overlay, so let's
remove the function and call the setup directly during driver load. This
should help us find a better point in the initialisation sequence for it
later.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-5-chris@chris-wilson.co.uk
      d378a3ef
  47. 06 11月, 2017 1 次提交
  49. 02 11月, 2017 1 次提交
    • M
      drm/i915/guc: Add support for reset engine using GuC commands · 6acbea89
      由 Michel Thierry 提交于 
      This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.

In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.

Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.

v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.

v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)

v4: Rebase.

v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.

v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.comReviewed-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
      6acbea89