- 11 6月, 2019 1 次提交
-
-
由 Vivien Didelot 提交于
[ Upstream commit 0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ] ethtool_get_regs() allocates a buffer of size ops->get_regs_len(), and pass it to the kernel driver via ops->get_regs() for filling. There is no restriction about what the kernel drivers can or cannot do with the open ethtool_regs structure. They usually set regs->version and ignore regs->len or set it to the same size as ops->get_regs_len(). But if userspace allocates a smaller buffer for the registers dump, we would cause a userspace buffer overflow in the final copy_to_user() call, which uses the regs.len value potentially reset by the driver. To fix this, make this case obvious and store regs.len before calling ops->get_regs(), to only copy as much data as requested by userspace, up to the value returned by ops->get_regs_len(). While at it, remove the redundant check for non-null regbuf. Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com> Reviewed-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 6月, 2019 39 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Nadav Amit 提交于
commit 89dd34caf73e28018c58cd193751e41b1f8bdc56 upstream. The use of ALIGN() in uvc_alloc_entity() is incorrect, since the size of (entity->pads) is not a power of two. As a stop-gap, until a better solution is adapted, use roundup() instead. Found by a static assertion. Compile-tested only. Fixes: 4ffc2d89 ("uvcvideo: Register subdevices for each entity") Signed-off-by: NNadav Amit <namit@vmware.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Frank Rowand 提交于
commit f96278810150fc39085d1872e5b39ea06366d03e upstream. Overlay nodes added by add_changeset_node() do not have the node fields name, phandle, and type set. The node passed to __of_attach_node() when the add node changeset entry is processed does not contain any properties. The node's properties are located in add property changeset entries that will be processed after the add node changeset is applied. Set the node's fields in the node contained in the add node changeset entry and do not set them to incorrect values in add_changeset_node(). A visible symptom that is fixed by this patch is the names of nodes added by overlays that have an entry in /sys/bus/platform/drivers/*/ will contain the unit-address but the node-name will be <NULL>, for example, "fc4ab000.<NULL>". After applying the patch the name, in this example, for node restart@fc4ab000 is "fc4ab000.restart". Tested-by: NAlan Tull <atull@kernel.org> Signed-off-by: NFrank Rowand <frank.rowand@sony.com> Cc: Phil Elwell <phil@raspberrypi.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Frank Rowand 提交于
commit 6f75118800acf77f8ad6afec61ca1b2349ade371 upstream. If overlay properties #address-cells or #size-cells are already in the live devicetree for any given node, then the values in the overlay must match the values in the live tree. If the properties are already in the live tree then there is no need to create a changeset entry to add them since they must have the same value. This reduces the memory used by the changeset and eliminates a possible memory leak. Tested-by: NAlan Tull <atull@kernel.org> Signed-off-by: NFrank Rowand <frank.rowand@sony.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nathan Chancellor 提交于
Prior to commit 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures") upstream, we allocated a cstat structure in lpfc_nvme_create_localport. When commit faf5a744f4f8 ("scsi: lpfc: avoid uninitialized variable warning") was backported, it was placed after the allocation so we leaked memory whenever this function was called and that conditional was true (so whenever CONFIG_NVME_FC is disabled). Move the IS_ENABLED if statement above the allocation since it is not needed when the condition is true. Reported-by: NPavel Machek <pavel@denx.de> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nadav Amit 提交于
[ Upstream commit 7298e24f904224fa79eb8fd7e0fbd78950ccf2db ] Set the page as executable after allocation. This patch is a preparatory patch for a following patch that makes module allocated pages non-executable. While at it, do some small cleanup of what appears to be unnecessary masking. Signed-off-by: NNadav Amit <namit@vmware.com> Signed-off-by: NRick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-11-namit@vmware.comSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Nadav Amit 提交于
[ Upstream commit 3c0dab44e22782359a0a706cbce72de99a22aa75 ] Since alloc_module() will not set the pages as executable soon, set ftrace trampoline pages as executable after they are allocated. For the time being, do not change ftrace to use the text_poke() interface. As a result, ftrace still breaks W^X. Signed-off-by: NNadav Amit <namit@vmware.com> Signed-off-by: NRick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.comSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Steven Rostedt (VMware) 提交于
[ Upstream commit d2a68c4effd821f0871d20368f76b609349c8a3b ] Since commit 79922b80 ("ftrace: Optimize function graph to be called directly"), dynamic trampolines should not be calling the function graph tracer at the end. If they do, it could cause the function graph tracer to trace functions that it filtered out. Right now it does not cause a problem because there's a test to check if the function graph tracer is attached to the same function as the function tracer, which for now is true. But the function graph tracer is undergoing changes that can make this no longer true which will cause the function graph tracer to trace other functions. For example: # cd /sys/kernel/tracing/ # echo do_IRQ > set_ftrace_filter # mkdir instances/foo # echo ip_rcv > instances/foo/set_ftrace_filter # echo function_graph > current_tracer # echo function > instances/foo/current_tracer Would cause the function graph tracer to trace both do_IRQ and ip_rcv, if the current tests change. As the current tests prevent this from being a problem, this code does not need to be backported. But it does make the code cleaner. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Todd Kjos 提交于
commit 5cec2d2e5839f9c0fec319c523a911e0a7fd299f upstream. An munmap() on a binder device causes binder_vma_close() to be called which clears the alloc->vma pointer. If direct reclaim causes binder_alloc_free_page() to be called, there is a race where alloc->vma is read into a local vma pointer and then used later after the mm->mmap_sem is acquired. This can result in calling zap_page_range() with an invalid vma which manifests as a use-after-free in zap_page_range(). The fix is to check alloc->vma after acquiring the mmap_sem (which we were acquiring anyway) and skip zap_page_range() if it has changed to NULL. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: NTodd Kjos <tkjos@google.com> Reviewed-by: NJoel Fernandes (Google) <joel@joelfernandes.org> Cc: stable <stable@vger.kernel.org> # 4.19 Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Todd Kjos 提交于
This reverts commit 6bf7d3c5. The commit message is for a different patch. Reverting and then adding the same patch back with the correct commit message. Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Cc: stable <stable@vger.kernel.org> # 4.19 Signed-off-by: NTodd Kjos <tkjos@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 392bef709659abea614abfe53cf228e7a59876a4. It seems to cause lots of problems when using the gold linker, and no one really needs this at the moment, so just revert it from the stable trees. Cc: Sami Tolvanen <samitolvanen@google.com> Reported-by: NKees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: NAlec Ari <neotheuser@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Miguel Ojeda 提交于
commit a6e60d84989fa0e91db7f236eda40453b0e44afa upstream. The upcoming GCC 9 release extends the -Wmissing-attributes warnings (enabled by -Wall) to C and aliases: it warns when particular function attributes are missing in the aliases but not in their target. In particular, it triggers for all the init/cleanup_module aliases in the kernel (defined by the module_init/exit macros), ending up being very noisy. These aliases point to the __init/__exit functions of a module, which are defined as __cold (among other attributes). However, the aliases themselves do not have the __cold attribute. Since the compiler behaves differently when compiling a __cold function as well as when compiling paths leading to calls to __cold functions, the warning is trying to point out the possibly-forgotten attribute in the alias. In order to keep the warning enabled, we decided to silence this case. Ideally, we would mark the aliases directly as __init/__exit. However, there are currently around 132 modules in the kernel which are missing __init/__exit in their init/cleanup functions (either because they are missing, or for other reasons, e.g. the functions being called from somewhere else); and a section mismatch is a hard error. A conservative alternative was to mark the aliases as __cold only. However, since we would like to eventually enforce __init/__exit to be always marked, we chose to use the new __copy function attribute (introduced by GCC 9 as well to deal with this). With it, we copy the attributes used by the target functions into the aliases. This way, functions that were not marked as __init/__exit won't have their aliases marked either, and therefore there won't be a section mismatch. Note that the warning would go away marking either the extern declaration, the definition, or both. However, we only mark the definition of the alias, since we do not want callers (which only see the declaration) to be compiled as if the function was __cold (and therefore the paths leading to those calls would be assumed to be unlikely). Link: https://lore.kernel.org/lkml/20190123173707.GA16603@gmail.com/ Link: https://lore.kernel.org/lkml/20190206175627.GA20399@gmail.com/Suggested-by: NMartin Sebor <msebor@gcc.gnu.org> Acked-by: NJessica Yu <jeyu@kernel.org> Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Miguel Ojeda 提交于
commit c0d9782f5b6d7157635ae2fd782a4b27d55a6013 upstream. From the GCC manual: copy copy(function) The copy attribute applies the set of attributes with which function has been declared to the declaration of the function to which the attribute is applied. The attribute is designed for libraries that define aliases or function resolvers that are expected to specify the same set of attributes as their targets. The copy attribute can be used with functions, variables, or types. However, the kind of symbol to which the attribute is applied (either function or variable) must match the kind of symbol to which the argument refers. The copy attribute copies only syntactic and semantic attributes but not attributes that affect a symbol’s linkage or visibility such as alias, visibility, or weak. The deprecated attribute is also not copied. https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html The upcoming GCC 9 release extends the -Wmissing-attributes warnings (enabled by -Wall) to C and aliases: it warns when particular function attributes are missing in the aliases but not in their target, e.g.: void __cold f(void) {} void __alias("f") g(void); diagnoses: warning: 'g' specifies less restrictive attribute than its target 'f': 'cold' [-Wmissing-attributes] Using __copy(f) we can copy the __cold attribute from f to g: void __cold f(void) {} void __copy(f) __alias("f") g(void); This attribute is most useful to deal with situations where an alias is declared but we don't know the exact attributes the target has. For instance, in the kernel, the widely used module_init/exit macros define the init/cleanup_module aliases, but those cannot be marked always as __init/__exit since some modules do not have their functions marked as such. Suggested-by: NMartin Sebor <msebor@gcc.gnu.org> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daniel Vetter 提交于
commit 204f640da6914844b3270b41b29c84f6e3b74083 upstream. If userspace doesn't enable universal planes, then we automatically add the primary and cursor planes. But for universal userspace there's no such check (and maybe we only want to give the lessee one plane, maybe not even the primary one), hence we need to check for the implied plane. v2: don't forget setcrtc ioctl. v3: Still allow disabling of the crtc in SETCRTC. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.chSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Vicente Bergas 提交于
commit b8f9d7f37b6af829c34c49d1a4f73ce6ed58e403 upstream. As explained by Robin Murphy: > the IOMMU shutdown disables paging, so if the VOP is still > scanning out then that will result in whatever IOVAs it was using now going > straight out onto the bus as physical addresses. We had a more radical approach before in commit 7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") but that resulted in new warnings and oopses on shutdown on rk3399 chromeos devices. So second try is resurrecting Vicentes shutdown change which should achieve the same result but in a less drastic way. Fixes: 63238173b2fa ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Suggested-by: NJeffyChen <jeffy.chen@rock-chips.com> Suggested-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NVicente Bergas <vicencb@gmail.com> [adapted commit message to explain the history] Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NBrian Norris <briannorris@chromium.org> Tested-by: NDouglas Anderson <dianders@chromium.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jernej Skrabec 提交于
commit 831adffb3b7b8df4c8e20b7b00843129fb87a166 upstream. Vendor provided documentation says that EMP bits should be set to 3 for pixel clocks greater than 148.5 MHz. Fix that. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-3-jernej.skrabec@siol.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jernej Skrabec 提交于
commit 8a943c6021ba8b95a36c842327e468df1fddd4a7 upstream. Current code initializes HDMI PHY clock driver before reset line is deasserted and clocks enabled. Because of that, initial readout of clock divider is incorrect (0 instead of 2). This causes any clock rate with divider 1 (register value 0) to be set incorrectly. Fix this by moving initialization of HDMI PHY clock driver after reset line is deasserted and clocks enabled. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-2-jernej.skrabec@siol.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Thomas Hellstrom 提交于
commit 63cb44441826e842b7285575b96db631cc9f2505 upstream. This may confuse user-space clients like plymouth that opens a drm file descriptor as a result of a hotplug event and then generates a new event... Cc: <stable@vger.kernel.org> Fixes: 5ea17348 ("drm/vmwgfx: Send a hotplug event at master_set") Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NDeepak Rawat <drawat@vmware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dmitry Osipenko 提交于
commit 61b51fb51c01a519a249d28ec55c6513a13be5a3 upstream. The allocated pages need to be invalidated in CPU caches. On ARM32 the DMA_BIDIRECTIONAL flag only ensures that data is written-back to DRAM and the data stays in CPU cache lines. While the DMA_FROM_DEVICE flag ensures that the corresponding CPU cache lines are getting invalidated and nothing more, that's exactly what is needed for a newly allocated pages. This fixes randomly failing rendercheck tests on Tegra30 using the Opentegra driver for tests that use small-sized pixmaps (10x10 and less, i.e. 1-2 memory pages) because apparently CPU reads out stale data from caches and/or that data is getting evicted to DRAM at the time of HW job execution. Fixes: bd43c9f0 ("drm/tegra: gem: Map pages via the DMA API") Cc: stable <stable@vger.kernel.org> Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kees Cook 提交于
commit 7210e060155b9cf557fb13128353c3e494fa5ed3 upstream. The gcc-common.h file did not take into account certain macros that might have already been defined in the build environment. This updates the header to avoid redefining the macros, as seen on a Darwin host using gcc 4.9.2: HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o - due to: scripts/gcc-plugins/gcc-common.h In file included from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:0: scripts/gcc-plugins/gcc-common.h:153:0: warning: "__unused" redefined ^ In file included from /usr/include/stdio.h:64:0, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/system.h:40, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/gcc-plugin.h:28, from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/plugin.h:23, from scripts/gcc-plugins/gcc-common.h:9, from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3: /usr/include/sys/cdefs.h:161:0: note: this is the location of the previous definition ^ Reported-and-tested-by: N"H. Nikolaus Schaller" <hns@goldelico.com> Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries") Cc: stable@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Benjamin Coddington 提交于
commit 141731d15d6eb2fd9aaefbf9b935ce86ae243074 upstream. This reverts most of commit b8eee0e90f97 ("lockd: Show pid of lockd for remote locks"), which caused remote locks to not be differentiated between remote processes for NLM. We retain the fixup for setting the client's fl_pid to a negative value. Fixes: b8eee0e90f97 ("lockd: Show pid of lockd for remote locks") Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Reviewed-by: NXueWei Zhang <xueweiz@google.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
commit 31fad7d41e73731f05b8053d17078638cf850fa6 upstream. In cifs_read_allocate_pages, in case of ENOMEM, we go through whole rdata->pages array but we have failed the allocation before nr_pages, therefore we may end up calling put_page with NULL pointer, causing oops Signed-off-by: NRoberto Bergantinos Corpas <rbergant@redhat.com> Acked-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Colin Ian King 提交于
commit 210782038b54ec8e9059a3c12d6f6ae173efa3a9 upstream. Currently in the case where SMB2_ioctl returns the -EOPNOTSUPP error there is a memory leak of pneg_inbuf. Fix this by returning via the out_free_inbuf exit path that will perform the relevant kfree. Addresses-Coverity: ("Resource leak") Fixes: 969ae8e8d4ee ("cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED") CC: Stable <stable@vger.kernel.org> # v5.1+ Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tim Collier 提交于
commit a67fedd788182764dc8ed59037c604b7e60349f1 upstream. Commit e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.") moved the retrieval of the transfer buffer from the URB from the top of function hfa384x_usbin_callback to a point after reposting of the URB via a call to submit_rx_urb. The reposting of the URB allocates a new transfer buffer so the new buffer is retrieved instead of the buffer containing the response passed into the callback. This results in failure to initialize the adapter with an error reported in the system log (something like "CTLX[1] error: state(Request failed)"). This change moves the retrieval to just before the point where the URB is reposted so that the correct transfer buffer is retrieved and initialization of the device succeeds. Signed-off-by: NTim Collier <osdevtc@gmail.com> Fixes: e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.") Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
commit ca641bae6da977d638458e78cd1487b6160a2718 upstream. The create_pagelist() "count" parameter comes from the user in vchiq_ioctl() and it could overflow. If you look at how create_page() is called in vchiq_prepare_bulk_data(), then the "size" variable is an int so it doesn't make sense to allow negatives or larger than INT_MAX. I don't know this code terribly well, but I believe that typical values of "count" are typically quite low and I don't think this check will affect normal valid uses at all. The "pagelist_size" calculation can also overflow on 32 bit systems, but not on 64 bit systems. I have added an integer overflow check for that as well. The Raspberry PI doesn't offer the same level of memory protection that x86 does so these sorts of bugs are probably not super critical to fix. Fixes: 71bad7f0 ("staging: add bcm2708 vchiq driver") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 George G. Davis 提交于
commit 099506cbbc79c0bd52b19cb6b930f256dabc3950 upstream. As noted in commit 84b40e3b ("serial: 8250: omap: Disable DMA for console UART"), UART console lines use low-level PIO only access functions which will conflict with use of the line when DMA is enabled, e.g. when the console line is also used for systemd messages. So disable DMA support for UART console lines. Reported-by: NMichael Rodin <mrodin@de.adit-jv.com> Link: https://patchwork.kernel.org/patch/10929511/Tested-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: NGeorge G. Davis <george_davis@mentor.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Grzegorz Halat 提交于
commit a1ad1cc9704f64c169261a76e1aee1cf1ae51832 upstream. After memory allocation failure vc_allocate() doesn't clean up data which has been initialized in visual_init(). In case of fbcon this leads to divide-by-0 in fbcon_init() on next open of the same tty. memory allocation in vc_allocate() may fail here: 1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); on next open() fbcon_init() skips vc_font.data initialization: 1088: if (!p->fontdata) { division by zero in fbcon_init() happens here: 1149: new_cols /= vc->vc_font.width; Additional check is needed in fbcon_deinit() to prevent usage of uninitialized vc_screenbuf: 1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf) 1252: set_vc_hi_font(vc, false); Crash: #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4 [exception RIP: fbcon_init+463] RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246 ... #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c #9 [ffffc90001eafbc8] con_install at ffffffff8154f624 ... Signed-off-by: NGrzegorz Halat <ghalat@redhat.com> Reviewed-by: NOleksandr Natalenko <oleksandr@redhat.com> Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Roberto Sassu 提交于
commit 221be106d75c1b511973301542f47d6000d0b63e upstream. This patch prevents memory access beyond the evm_tfm array by checking the validity of the index (hash algorithm) passed to init_desc(). The hash algorithm can be arbitrarily set if the security.ima xattr type is not EVM_XATTR_HMAC. Fixes: 5feeb611 ("evm: Allow non-SHA1 digital signatures") Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: NMimi Zohar <zohar@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Roberto Sassu 提交于
commit 8cdc23a3d9ec0944000ad43bad588e36afdc38cd upstream. Show the '^' character when a policy rule has flag IMA_INMASK. Fixes: 80eae209 ("IMA: allow reading back the current IMA policy") Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: NMimi Zohar <zohar@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jonathan Corbet 提交于
commit 096ea522e84ea68f8e6c41e5e7294731a81e29bc upstream. Recent versions of sphinx will emit messages like: Documentation/sphinx/kerneldoc.py:103: RemovedInSphinx20Warning: app.warning() is now deprecated. Use sphinx.util.logging instead. Switch to sphinx.util.logging to make this unsightly message go away. Alas, that interface was only added in version 1.6, so we have to add a version check to keep things working with older sphinxes. Cc: stable@vger.kernel.org Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jonathan Corbet 提交于
commit 2404dad1f67f8917e30fc22a85e0dbcc85b99955 upstream. AutoReporter is going away; recent versions of sphinx emit a warning like: Documentation/sphinx/kerneldoc.py:125: RemovedInSphinx20Warning: AutodocReporter is now deprecated. Use sphinx.util.docutils.switch_source_input() instead. Make the switch. But switch_source_input() only showed up in 1.7, so we have to do ugly version checks to keep things working in older versions. Cc: stable@vger.kernel.org Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jonathan Corbet 提交于
commit 3bc8088464712fdcb078eefb68837ccfcc413c88 upstream. Our version check in Documentation/conf.py never envisioned a world where Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our version check to handle higher version numbers correctly. Cc: stable@vger.kernel.org Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Catalin Marinas 提交于
commit 00377277166bac6939d8f72b429301369acaf2d8 upstream. Following commit 4378a7d4 ("arm64: implement syscall wrappers"), the syscall function names gained the '__arm64_' prefix. Ensure that we have the correct #define for redirecting a default syscall through a wrapper. Fixes: 4378a7d4 ("arm64: implement syscall wrappers") Cc: <stable@vger.kernel.org> # 4.19.x- Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Zhenliang Wei 提交于
commit 98af37d624ed8c83f1953b1b6b2f6866011fc064 upstream. In the fixes commit, removing SIGKILL from each thread signal mask and executing "goto fatal" directly will skip the call to "trace_signal_deliver". At this point, the delivery tracking of the SIGKILL signal will be inaccurate. Therefore, we need to add trace_signal_deliver before "goto fatal" after executing sigdelset. Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info. Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com Fixes: cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT") Signed-off-by: NZhenliang Wei <weizhenliang@huawei.com> Reviewed-by: NChristian Brauner <christian@brauner.io> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Ivan Delalande <colona@arista.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
commit 3e8589963773a5c23e2f1fe4bcad0e9a90b7f471 upstream. We have a single node system with node 0 disabled: Scanning NUMA topology in Northbridge 24 Number of physical nodes 2 Skipping disabled node 0 Node 1 MemBase 0000000000000000 Limit 00000000fbff0000 NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff] This causes crashes in memcg when system boots: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] ... RIP: 0010:list_lru_add+0x94/0x170 ... Call Trace: d_lru_add+0x44/0x50 dput.part.34+0xfc/0x110 __fput+0x108/0x230 task_work_run+0x9f/0xc0 exit_to_usermode_loop+0xf5/0x100 It is reproducible as far as 4.12. I did not try older kernels. You have to have a new enough systemd, e.g. 241 (the reason is unknown -- was not investigated). Cannot be reproduced with systemd 234. The system crashes because the size of lru array is never updated in memcg_update_all_list_lrus and the reads are past the zero-sized array, causing dereferences of random memory. The root cause are list_lru_memcg_aware checks in the list_lru code. The test in list_lru_memcg_aware is broken: it assumes node 0 is always present, but it is not true on some systems as can be seen above. So fix this by avoiding checks on node 0. Remember the memcg-awareness by a bool flag in struct list_lru. Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists") Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NMichal Hocko <mhocko@suse.com> Suggested-by: NVladimir Davydov <vdavydov.dev@gmail.com> Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by: NShakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Burmeister 提交于
commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream. The datasheet states: Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking (crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable clocking Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal oscillator. When using an external clock source at XIN, CrystalEn must be set low. The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not. This was required to make the MAX3107 with an external crystal on our board able to send or receive data. Signed-off-by: NJoe Burmeister <joe.burmeister@devtank.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jorge Ramirez-Ortiz 提交于
commit 61c0e37950b88bad590056286c1d766b1f167f4e upstream. When the tty layer requests the uart to throttle, the current code executing in msm_serial will trigger "Bad mode in Error Handler" and generate an invalid stack frame in pstore before rebooting (that is if pstore is indeed configured: otherwise the user shall just notice a reboot with no further information dumped to the console). This patch replaces the PIO byte accessor with the word accessor already used in PIO mode. Fixes: 68252424 ("tty: serial: msm: Support big-endian CPUs") Cc: stable@vger.kernel.org Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: NStephen Boyd <swboyd@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Masahisa Kojima 提交于
commit ff9378904d9d7a3fcb8406604e089e535e357b1d upstream. master_xfer should return the number of messages successfully processed. Fixes: 0d676a6c ("i2c: add support for Socionext SynQuacer I2C controller") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: NOkamoto Satoru <okamoto.satoru@socionext.com> Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Vadim Pasternak 提交于
commit 13067ef73f337336e3149f5bb9f3fd05fe7f87a0 upstream. Fix wrong order in probing routine initialization - field `base_addr' is used before it's initialized. Move assignment of 'priv->base_addr` to the beginning, prior the call to mlxcpld_i2c_read_comm(). Wrong order caused the first read of capability register to be executed at wrong offset 0x0 instead of 0x2000. By chance it was a "good garbage" at 0x0 offset. Fixes: 313ce648 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld") Signed-off-by: NVadim Pasternak <vadimp@mellanox.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-