- 31 10月, 2006 1 次提交
-
-
由 Neil Brown 提交于
A recent patch fixed a problem which would occur when the refcount on an auth_domain reached zero. This problem has not been reported in practice despite existing in two major kernel releases because the refcount can never reach zero. This patch fixes the problems that stop the refcount reaching zero. 1/ We were adding to the refcount when inserting in the hash table, but only removing from the hashtable when the refcount reached zero. Obviously it never would. So don't count the implied reference of being in the hash table. 2/ There are two paths on which a socket can be destroyed. One called svcauth_unix_info_release(). The other didn't. So when the other was taken, we can lose a reference to an ip_map which in-turn holds a reference to an auth_domain So unify the exit paths into svc_sock_put. This highlights the fact that svc_delete_socket has slightly odd semantics - it does not drop a reference but probably should. Fixing this need a bit more thought and testing. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 10月, 2006 1 次提交
-
-
由 NeilBrown 提交于
This patch is suitable for just about any 2.6 kernel. It should go in 2.6.19 and 2.6.18.2 and possible even the .17 and .16 stable series. This is a long standing bug that seems to have only recently become apparent, presumably due to increasing use of NFS over TCP - many distros seem to be making it the default. The SK_CONN bit gets set when a listening socket may be ready for an accept, just as SK_DATA is set when data may be available. It is entirely possible for svc_tcp_accept to be called with neither of these set. It doesn't happen often but there is a small race in svc_sock_enqueue as SK_CONN and SK_DATA are tested outside the spin_lock. They could be cleared immediately after the test and before the lock is gained. This normally shouldn't be a problem. The sockets are non-blocking so trying to read() or accept() when ther is nothing to do is not a problem. However: svc_tcp_recvfrom makes the decision "Should I accept() or should I read()" based on whether SK_CONN is set or not. This usually works but is not safe. The decision should be based on whether it is a TCP_LISTEN socket or a TCP_CONNECTED socket. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: <stable@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 10月, 2006 1 次提交
-
-
由 NeilBrown 提交于
There is some confusion about the meaning of 'bufsz' for a sunrpc server. In some cases it is the largest message that can be sent or received. In other cases it is the largest 'payload' that can be included in a NFS message. In either case, it is not possible for both the request and the reply to be this large. One of the request or reply may only be one page long, which fits nicely with NFS. So we remove 'bufsz' and replace it with two numbers: 'max_payload' and 'max_mesg'. Max_payload is the size that the server requests. It is used by the server to check the max size allowed on a particular connection: depending on the protocol a lower limit might be used. max_mesg is the largest single message that can be sent or received. It is calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and with PAGE_SIZE added to overhead. Only one of the request and reply may be this size. The other must be at most one page. Cc: Greg Banks <gnb@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 5 次提交
-
-
由 Greg Banks 提交于
Speed up high call-rate workloads by caching the struct ip_map for the peer on the connected struct svc_sock instead of looking it up in the ip_map cache hashtable on every call. This helps workloads using AUTH_SYS authentication over TCP. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. Profiling showed strcmp(), called from ip_map_match(), was taking 4.8% of each CPU, and ip_map_lookup() was taking 2.9%. This patch drops both contribution into the profile noise. Note that the above result overstates this value of this patch for most workloads. The synthetic clients are all using separate IP addresses, so there are 64 entries in the ip_map cache hash. Because the kernel measured contained the bug fixed in commit commit 1f1e030b and was running on 64bit little-endian machine, probably all of those 64 entries were on a single chain, thus increasing the cost of ip_map_lookup(). With a modern kernel you would need more clients to see the same amount of performance improvement. This patch has helped to scale knfsd to handle a deployment with 2000 NFS clients. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
.. by allocating the array of 'kvec' in 'struct svc_rqst'. As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer allocate an array of this size on the stack. So we allocate it in 'struct svc_rqst'. However svc_rqst contains (indirectly) an array of the same type and size (actually several, but they are in a union). So rather than waste space, we move those arrays out of the separately allocated union and into svc_rqst to share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at different times, so there is no conflict). Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256. This means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES. struct svc_rqst contains two such arrays. However the there are never more that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is needed. The two arrays are for the pages holding the request, and the pages holding the reply. Instead of two arrays, we can simply keep an index into where the first reply page is. This patch also removes a number of small inline functions that probably server to obscure what is going on rather than clarify it, and opencode the needed functionality. Also remove the 'rq_restailpage' variable as it is *always* 0. i.e. if the response 'xdr' structure has a non-empty tail it is always in the same pages as the head. check counters are initilised and incr properly check for consistant usage of ++ etc maybe extra some inlines for common approach general review Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Magnus Maatta <novell@kiruna.se> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Arrgg.. We cannot 'lockd_up' before 'svc_addsock' as we don't know the protocol yet.... So switch it around again and save the name of the created sockets so that it can be closed if lock_up fails. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The refcount that nfsd holds on lockd is based on the number of open sockets. So when we close a socket, we should decrement the ref (with lockd_down). Currently when a socket is closed via writing to the portlist file, that doesn't happen. So: make sure we get an error return if the socket that was requested does is not found, and call lockd_down if it was. Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 10月, 2006 10 次提交
-
-
由 Greg Banks 提交于
Actually implement multiple pools. On NUMA machines, allocate a svc_pool per NUMA node; on SMP a svc_pool per CPU; otherwise a single global pool. Enqueue sockets on the svc_pool corresponding to the CPU on which the socket bh is run (i.e. the NIC interrupt CPU). Threads have their cpu mask set to limit them to the CPUs in the svc_pool that owns them. This is the patch that allows an Altix to scale NFS traffic linearly beyond 4 CPUs and 4 NICs. Incorporates changes and feedback from Neil Brown, Trond Myklebust, and Christoph Hellwig. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
Split out the list of idle threads and pending sockets from svc_serv into a new svc_pool structure, and allocate a fixed number (in this patch, 1) of pools per svc_serv. The new structure contains a lock which takes over several of the duties of svc_serv->sv_lock, which is now relegated to protecting only sv_tempsocks, sv_permsocks, and sv_tmpcnt in svc_serv. The point is to move the hottest fields out of svc_serv and into svc_pool, allowing a following patch to arrange for a svc_pool per NUMA node or per CPU. This is a major step towards making the NFS server NUMA-friendly. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
The SK_BUSY bit in svc_sock->sk_flags ensures that we do not attempt to enqueue a socket twice. Currently, setting and clearing the bit is protected by svc_serv->sv_lock. As I intend to reduce the data that the lock protects so it's not held when svc_sock_enqueue() tests and sets SK_BUSY, that test and set needs to be atomic. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
Convert the svc_sock->sk_reserved variable from an int protected by svc_serv->sv_lock, to an atomic. This reduces (by 1) the number of places we need to take the (effectively global) svc_serv->sv_lock. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
Protect the svc_sock->sk_deferred list with a new lock svc_sock->sk_defer_lock instead of svc_serv->sv_lock. Using the more fine-grained lock reduces the number of places we need to take the svc_serv lock. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
Convert the svc_sock->sk_inuse counter from an int protected by svc_serv->sv_lock, to an atomic. This reduces the number of places we need to take the (effectively global) svc_serv->sv_lock. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Banks 提交于
Following are 11 patches from Greg Banks which combine to make knfsd more Numa-aware. They reduce hitting on 'global' data structures, and create some data-structures that can be node-local. knfsd threads are bound to a particular node, and the thread to handle a new request is chosen from the threads that are attach to the node that received the interrupt. The distribution of threads across nodes can be controlled by a new file in the 'nfsd' filesystem, though the default approach of an even spread is probably fine for most sites. Some (old) numbers that show the efficacy of these patches: N == number of NICs == number of CPUs == nmber of clients. Number of NUMA nodes == N/2 N Throughput, MiB/s CPU usage, % (max=N*100) Before After Before After --- ------ ---- ----- ----- 4 312 435 350 228 6 500 656 501 418 8 562 804 690 589 This patch: Move the aging of RPC/TCP connection sockets from the main svc_recv() loop to a timer which uses a mark-and-sweep algorithm every 6 minutes. This reduces the amount of work that needs to be done in the main RPC loop and the length of time we need to hold the (effectively global) svc_serv->sv_lock. [akpm@osdl.org: cleanup] Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
It isn't needed as it is available in rqstp->rq_server, and dropping it allows some local vars to be dropped. [akpm@osdl.org: build fix] Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Userspace should create and bind a socket (but not connectted) and write the 'fd' to portlist. This will cause the nfs server to listen on that socket. To close a socket, the name of the socket - as read from 'portlist' can be written to 'portlist' with a preceding '-'. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This file will list all ports that nfsd has open. Default when TCP enabled will be ipv4 udp 0.0.0.0 2049 ipv4 tcp 0.0.0.0 2049 Later, the list of ports will be settable. 'portlist' chosen rather than 'ports', to avoid unnecessary confusion with non-mainline patches which created 'ports' with different semantics. [akpm@osdl.org: cleanups, build fix] Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 9月, 2006 2 次提交
-
-
由 Eric Sesterhenn 提交于
coverity spotted this one as possible dereference in the dprintk(), but since there is only one caller of svc_create_socket(), which always passes a valid sin, we dont need this check. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
pure s/u32/__be32/ [AV: large part based on Alexey's patches] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 1 次提交
-
-
由 Sridhar Samudrala 提交于
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2006 1 次提交
-
-
由 Panagiotis Issaris 提交于
Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2006 1 次提交
-
-
由 J. Bruce Fields 提交于
The server code currently keeps track of the destination address on every request so that it can reply using the same address. However we forget to do that in the case of a deferred request. Remedy this oversight. >From folks at PolyServe. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 1 次提交
-
-
由 Olaf Kirch 提交于
I submitted this one previously - svc_tcp_recvfrom currently returns any errors to the caller, including ECONNRESET and the like. This is something svc_recv isn't able to deal with: len = svsk->sk_recvfrom(rqstp); [...] if (len == 0 || len == -EAGAIN) { [...] return -EAGAIN; } [...] return len; The nfsd main loop will exit when it sees an error code other than EAGAIN. The following patch fixes this problem svc_recv is not equipped to deal with error codes other than EAGAIN, and will propagate anything else (such as ECONNRESET) up to nfsd, causing it to exit. Signed-off-by: NOlaf Kirch <okir@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 1月, 2006 1 次提交
-
-
由 Eric Dumazet 提交于
I noticed that some of 'struct proto_ops' used in the kernel may share a cache line used by locks or other heavily modified data. (default linker alignement is 32 bytes, and L1_CACHE_LINE is 64 or 128 at least) This patch makes sure a 'struct proto_ops' can be declared as const, so that all cpus can share all parts of it without false sharing. This is not mandatory : a driver can still use a read/write structure if it needs to (and eventually a __read_mostly) I made a global stubstitute to change all existing occurences to make them const. This should reduce the possibility of false sharing on SMP, and speedup some socket system calls. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2005 1 次提交
-
-
由 NeilBrown 提交于
Being kernel-threads, nfsd servers don't get pre-empted (depending on CONFIG). If there is a steady stream of NFS requests that can be served from cache, an nfsd thread may hold on to a cpu indefinitely, which isn't very friendly. So it is good to have a cond_resched in there (just before looking for a new request to serve), to make sure we play nice. Signed-off-by: NNeil Brown <neilb@suse.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2005 1 次提交
-
-
由 Andrew Morton 提交于
Convert nanoseconds to microseconds correctly. Spotted by Steve Dickson <SteveD@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 9月, 2005 1 次提交
-
-
由 Chuck Lever 提交于
Clean-up: Move some code that is common to both RPC client- and server-side socket transports into its own source file, net/sunrpc/socklib.c. Test-plan: Compile kernel with CONFIG_NFS enabled. Millions of fsx operations over UDP, client and server. Connectathon over UDP. Version: Thu, 11 Aug 2005 16:03:09 -0400 Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 9月, 2005 2 次提交
-
-
由 Neil Brown 提交于
Change a printk(KERN_WARNING to dprintk, and it is really only interesting when trying to debug a problem, and can occur normally without error. Remove various gratuitous gotos in surrounding code, and remove some type-cast assignments from inside 'if' conditionals, as that is just obscuring what it going on. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nishanth Aravamudan 提交于
Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded division to avoid rounding issues. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2005 3 次提交
-
-
由 Patrick McHardy 提交于
Reduces skb size by 8 bytes on 64-bit. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Lots of places just needs the states, not even linux/tcp.h, where this enum was, needs it. This speeds up development of the refactorings as less sources are rebuilt when things get moved from net/tcp.h. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2005 1 次提交
-
-
由 David S. Miller 提交于
We need to divide, not multiply. While we're here, use NSEC_PER_USEC instead of a magic constant. Based upon a report from Josip Loncaric and a patch by Andrew Morton. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2005 1 次提交
-
-
由 Christoph Lameter 提交于
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: NChristoph Lameter <christoph@lameter.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-