strparser wants to check socket ownership without producing any
warnings. As indicated by the comment in the code, it is permissible
for owned_by_user to return true.

Fixes: 43a0c675 ("strparser: Stream parser for messages")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com>
Signed-off-by: NTom Herbert <tom@quantonium.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows checking socket lock ownership with producing lockdep
warnings.
Signed-off-by: NTom Herbert <tom@quantonium.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_copy_ubufs must unclone before it is safe to modify its
skb_shared_info with skb_zcopy_clear.

Commit b90ddd56 ("skbuff: skb_copy_ubufs must release uarg even
without user frags") ensures that all skbs release their zerocopy
state, even those without frags.

But I forgot an edge case where such an skb arrives that is cloned.

The stack does not build such packets. Vhost/tun skbs have their
frags orphaned before cloning. TCP skbs only attach zerocopy state
when a frag is added.

But if TCP packets can be trimmed or linearized, this might occur.
Tracing the code I found no instance so far (e.g., skb_linearize
ends up calling skb_zcopy_clear if !skb->data_len).

Still, it is non-obvious that no path exists. And it is fragile to
rely on this.

Fixes: b90ddd56 ("skbuff: skb_copy_ubufs must release uarg even without user frags")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 42b531de ("tipc: Fix missing connection request
handling"), we replaced unconditional wakeup() with condtional
wakeup for clients with flags POLLIN | POLLRDNORM | POLLRDBAND.

This breaks the applications which do a connect followed by poll
with POLLOUT flag. These applications are not woken when the
connection is ESTABLISHED and hence sleep forever.

In this commit, we fix it by including the POLLOUT event for
sockets in TIPC_CONNECTING state.

Fixes: 42b531de ("tipc: Fix missing connection request handling")
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2017-12-28

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two small fixes for bpftool. Fix otherwise broken output if any of
   the system calls failed when listing maps in json format and instead
   of bailing out, skip maps or progs that disappeared between fetching
   next id and getting an fd for that id, both from Jakub.

2) Small fix in BPF selftests to respect LLC passed from command line
   when testing for -mcpu=probe presence, from Quentin.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch(180d8cd9) replaces all uses of struct sock fields'
memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem
to accessor macros. But the sockets_allocated field of sctp sock is
not replaced at all. Then replace it now for unifying the code.

Fixes: 180d8cd9 ("foundations of per-cgroup memory pressure controlling.")
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NTonghao Zhang <zhangtonghao@didichuxing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While in recovery process of PCI error (called EEH on PowerPC arch),
another PCI transaction could be corrupted causing a situation of
nested PCI errors. Also, this scenario could be reproduced with
error injection mechanisms (for debug purposes).

We observe that in case of nested PCI errors, bnx2x might attempt to
initialize its shmem and cause a kernel crash due to bad addresses
read from MCP. Multiple different stack traces were observed depending
on the point the second PCI error happens.

This patch avoids the crashes by:

 * failing PCI recovery in case of nested errors (since multiple
 PCI errors in a row are not expected to lead to a functional
 adapter anyway), and by,

 * preventing access to adapter FW when MCP is failed (we mark it as
 failed when shmem cannot get initialized properly).
Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: NShahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Siva Reddy Kallam says:

====================
tg3: update on copyright and couple of fixes

First patch:
	Update copyright

Second patch:
	Add workaround to restrict 5762 MRRS

Third patch:
	Add PHY reset in change MTU path for 5720
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.
Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.
Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-12-22

1) Check for valid id proto in validate_tmpl(), otherwise
   we may trigger a warning in xfrm_state_fini().
   From Cong Wang.

2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute.
   From Michal Kubecek.

3) Verify the state is valid when encap_type < 0,
   otherwise we may crash on IPsec GRO .
   From Aviv Heller.

4) Fix stack-out-of-bounds read on socket policy lookup.
   We access the flowi of the wrong address family in the
   IPv4 mapped IPv6 case, fix this by catching address
   family missmatches before we do the lookup.

5) fix xfrm_do_migrate() with AEAD to copy the geniv
   field too. Otherwise the state is not fully initialized
   and migration fails. From Antony Antony.

6) Fix stack-out-of-bounds with misconfigured transport
   mode policies. Our policy template validation is not
   strict enough. It is possible to configure policies
   with transport mode template where the address family
   of the template does not match the selectors address
   family. Fix this by refusing such a configuration,
   address family can not change on transport mode.

7) Fix a policy reference leak when reusing pcpu xdst
   entry. From Florian Westphal.

8) Reinject transport-mode packets through tasklet,
   otherwise it is possible to reate a recursion
   loop. From Herbert Xu.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The enet IP only support 32 bit, it will use swiotlb buffer to do dma
mapping when xmit buffer DMA memory address is bigger than 4G in i.MX
platform. After stress suspend/resume test, it will print out:

log:
[12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes)
[12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet
[12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed

The issue is that the ready xmit buffers that are dma mapped but DMA still
don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped.
So it should check the dma mapping buffer and unmap them.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling tipc_mon_delete() before the monitor has been created will oops.
This can happen in tipc_enable_bearer() error path if tipc_disc_create()
fails.

[   48.589074] BUG: unable to handle kernel paging request at 0000000000001008
[   48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc]
[   48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0
[   48.592230] Oops: 0000 [#1] SMP KASAN
[   48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G    B            4.15.0-rc4-pc64-dirty #5
[   48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[   48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc]
[   48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282
[   48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000
[   48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297
[   48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533
[   48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050
[   48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020
[   48.608228] FS:  00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000
[   48.610189] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0
[   48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   48.615038] Call Trace:
[   48.615635]  tipc_enable_bearer+0x415/0x5e0 [tipc]
[   48.620623]  tipc_nl_bearer_enable+0x1ab/0x200 [tipc]
[   48.625118]  genl_family_rcv_msg+0x36b/0x570
[   48.631233]  genl_rcv_msg+0x5a/0xa0
[   48.631867]  netlink_rcv_skb+0x1cc/0x220
[   48.636373]  genl_rcv+0x24/0x40
[   48.637306]  netlink_unicast+0x29c/0x350
[   48.639664]  netlink_sendmsg+0x439/0x590
[   48.642014]  SYSC_sendto+0x199/0x250
[   48.649912]  do_syscall_64+0xfd/0x2c0
[   48.650651]  entry_SYSCALL64_slow_path+0x25/0x25
[   48.651843] RIP: 0033:0x7fc6859848e3
[   48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3
[   48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003
[   48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c
[   48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010
[   48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000
[   48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668
[   48.664073] CR2: 0000000000001008
[   48.664576] ---[ end trace e811818d54d5ce88 ]---
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix memory leak in tipc_enable_bearer() if enable_media() fails, and
cleanup with bearer_disable() if tipc_mon_create() fails.
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS currently doesn't check if the length of the control message is
large enough to hold the required data, before dereferencing the control
message data. This results in following crash:

BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013
[inline]
BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90
net/rds/send.c:1066
Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157

CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x25b/0x340 mm/kasan/report.c:409
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
 rds_rdma_bytes net/rds/send.c:1013 [inline]
 rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066
 sock_sendmsg_nosec net/socket.c:628 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:638
 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018
 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108
 SYSC_sendmmsg net/socket.c:2139 [inline]
 SyS_sendmmsg+0x35/0x60 net/socket.c:2134
 entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x43fe49
RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49
RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0
R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000

To fix this, we verify that the cmsg_len is large enough to hold the
data to be read, before proceeding further.
Reported-by: Nsyzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: NAvinash Repaka <avinash.repaka@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using a preprocessor directive to check for CONFIG_IPV6 in the middle of
a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series
of errors:

./include/trace/events/tcp.h:68:1: error: directive in argument list
./include/trace/events/tcp.h:75:1: error: directive in argument list
./include/trace/events/tcp.h:144:1: error: directive in argument list
./include/trace/events/tcp.h:151:1: error: directive in argument list
./include/trace/events/tcp.h:216:1: error: directive in argument list
./include/trace/events/tcp.h:223:1: error: directive in argument list
./include/trace/events/tcp.h:274:1: error: directive in argument list
./include/trace/events/tcp.h:281:1: error: directive in argument list

Once sparse finds an error, it stops printing warnings for the file it
is checking. This masks any sparse warnings that would normally be
reported for the core TCP code.

Instead, handle the preprocessor conditionals in a couple of auxiliary
macros. This also has the benefit of reducing duplicate code.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a group member receives a member WITHDRAW event, this might have
two reasons: either the peer member is leaving the group, or the link
to the member's node has been lost.

In the latter case we need to issue a DOWN event to the user right away,
and let function tipc_group_filter_msg() perform delete of the member
item. However, in this case we miss to change the state of the member
item to MBR_LEAVING, so the member item is not deleted, and we have a
memory leak.

We now separate better between the four sub-cases of a WITHRAW event
and make sure that each case is handled correctly.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to check block for being null in both tcf_block_put and
tcf_block_put_ext.

Fixes: 343723dd ("net: sched: fix clsact init error path")
Reported-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 2f487712 ("tipc: guarantee that group broadcast doesn't
bypass group unicast") we introduced a mechanism that requires the first
(replicated) broadcast sent after a unicast to be acknowledged by all
receivers before permitting sending of the next (true) broadcast.

The counter for keeping track of the number of acknowledges to expect
is based on the tipc_group::member_cnt variable. But this misses that
some of the known members may not be ready for reception, and will never
acknowledge the message, either because they haven't fully joined the
group or because they are leaving the group. Such members are identified
by not fulfilling the condition tested for in the function
tipc_group_is_enabled().

We now set the counter for the actual number of acks to receive at the
moment the message is sent, by just counting the number of recipients
satisfying the tipc_group_is_enabled() test.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rcu_barrier_bh() in mini_qdisc_pair_swap() is to wait for
flying RCU callback installed by a previous mini_qdisc_pair_swap(),
however we miss it on the tp_head==NULL path, which leads to that
the RCU callback still uses miniq_old->rcu after it is freed together
with qdisc in qdisc_graft(). So just add it on that path too.

Fixes: 46209401 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath ")
Reported-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.

Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().

Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg")
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ip6gre is created using ioctl, its features, such as
scatter-gather, GSO and tx-checksumming will be turned off:

  # ip -f inet6 tunnel add gre6 mode ip6gre remote fd00::1
  # ethtool -k gre6 (truncated output)
    tx-checksumming: off
    scatter-gather: off
    tcp-segmentation-offload: off
    generic-segmentation-offload: off [requested on]

But when netlink is used, they will be enabled:
  # ip link add gre6 type ip6gre remote fd00::1
  # ethtool -k gre6 (truncated output)
    tx-checksumming: on
    scatter-gather: on
    tcp-segmentation-offload: on
    generic-segmentation-offload: on

This results in a loss of performance when gre6 is created via ioctl.
The issue was found with LTP/gre tests.

Fix it by moving the setup of device features to a separate function
and invoke it with ndo_init callback because both netlink and ioctl
will eventually call it via register_netdevice():

   register_netdevice()
       - ndo_init() callback -> ip6gre_tunnel_init() or ip6gre_tap_init()
           - ip6gre_tunnel_init_common()
                - ip6gre_tnl_init_features()

The moved code also contains two minor style fixes:
  * removed needless tab from GRE6_FEATURES on NETIF_F_HIGHDMA line.
  * fixed the issue reported by checkpatch: "Unnecessary parentheses around
    'nt->encap.type == TUNNEL_ENCAP_NONE'"

Fixes: ac4eb009 ("ip6gre: Add support for basic offloads offloads excluding GSO")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled.  This is noticable if your SFP module is fiber, and
it supports faster speeds than 1G with 2.5G support in place.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When setting the ethtool settings, ensure that the validated PHY
interface mode is propagated to the current link settings, so that
2500BaseX can be selected.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
Two small fixes here to listing maps and programs.  The loop for showing
maps is written slightly differently to programs which was missed in JSON
output support, and output would be broken if any of the system calls
failed.  Second fix is in very unlikely case that program or map disappears
after we get its ID we should just skip over that object instead of failing.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

On program/map show we may get an ID of an object from GETNEXT,
but the object may disappear before we call GET_FD_BY_ID.  If
that happens, ignore the object and continue.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

We can't return from the middle of do_show(), because
json_array will not be closed.  Break out of the loop.
Note that the error handling after the loop depends on
errno, so no need to set err.

Fixes: 831a0aaf ("tools: bpftool: add JSON output for `bpftool map *` commands")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Pull networking fixes from David Miller"
 "What's a holiday weekend without some networking bug fixes? [1]

   1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
      calls, from Daniel Borkmann.

   2) Fix regression from errata limiting change to marvell PHY driver,
      from Zhao Qiang.

   3) Fix u16 overflow in SCTP, from Xin Long.

   4) Fix potential memory leak during bridge newlink, from Nikolay
      Aleksandrov.

   5) Fix BPF selftest build on s390, from Hendrik Brueckner.

   6) Don't append to cfg80211 automatically generated certs file,
      always write new ones from scratch. From Thierry Reding.

   7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.

   8) Fix hang on tg3 MTU change with certain chips, from Brian King.

   9) Add stall detection to arc emac driver and reset chip when this
      happens, from Alexander Kochetkov.

  10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.

  11) Fix stmmac timestamping bug due to mis-shifting of field. From
      Fredrik Hallenberg.

  12) Fix metrics match when deleting an ipv4 route. The kernel sets
      some internal metrics bits which the user isn't going to set when
      it makes the delete request. From Phil Sutter.

  13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
      from Yelena Krivosheev.

  14) Fix double free and memory corruption in get_net_ns_by_id, from
      Eric W. Biederman.

  15) Flush ipv4 FIB tables in the reverse order. Some tables can share
      their actual backing data, in particular this happens for the MAIN
      and LOCAL tables. We have to kill the LOCAL table first, because
      it uses MAIN's backing memory. Fix from Ido Schimmel.

  16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
      Horn, and Alexei Starovoitov.

  17) Make changes to ipv6 autoflowlabel sysctl really propagate to
      sockets, unless the socket has set the per-socket value
      explicitly. From Shaohua Li.

  18) Fix leaks and double callback invocations of zerocopy SKBs, from
      Willem de Bruijn"

[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
  skbuff: skb_copy_ubufs must release uarg even without user frags
  skbuff: orphan frags before zerocopy clone
  net: reevalulate autoflowlabel setting after sysctl setting
  openvswitch: Fix pop_vlan action for double tagged frames
  ipv6: Honor specified parameters in fibmatch lookup
  bpf: do not allow root to mangle valid pointers
  selftests/bpf: add tests for recent bugfixes
  bpf: fix integer overflows
  bpf: don't prune branches when a scalar is replaced with a pointer
  bpf: force strict alignment checks for stack pointers
  bpf: fix missing error return in check_stack_boundary()
  bpf: fix 32-bit ALU op verification
  bpf: fix incorrect tracking of register size truncation
  bpf: fix incorrect sign extension in check_alu_op()
  bpf/verifier: fix bounds calculation on BPF_RSH
  ipv4: Fix use-after-free when flushing FIB tables
  s390/qeth: fix error handling in checksum cmd callback
  tipc: remove joining group member from congested list
  selftests: net: Adding config fragment CONFIG_NUMA=y
  nfp: bpf: keep track of the offloaded program
  ...

Makefile has a LLC variable that is initialised to "llc", but can
theoretically be overridden from the command line ("make LLC=llc-6.0").
However, this fails because for LLVM probe check, "llc" is called
directly. Use the $(LLC) variable instead to fix this.

Fixes: 22c88526 ("bpf: improve selftests and add tests for meta pointer")
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Saeed Mahameed says:

===================
Mellanox, mlx5 fixes 2017-12-19

The follwoing series includes some fixes for mlx5 core and etherent
driver.

Please pull and let me know if there is any problem.

This series doesn't introduce any conflict with the ongoing mlx5 for-next
submission.

For -stable:

kernels >= v4.7.y
    ("net/mlx5e: Fix possible deadlock of VXLAN lock")
    ("net/mlx5e: Add refcount to VXLAN structure")
    ("net/mlx5e: Prevent possible races in VXLAN control flow")
    ("net/mlx5e: Fix features check of IPv6 traffic")

kernels >= v4.9.y
    ("net/mlx5: Fix error flow in CREATE_QP command")
    ("net/mlx5: Fix rate limit packet pacing naming and struct")

kernels >= v4.13.y
    ("net/mlx5: FPGA, return -EINVAL if size is zero")

kernels >= v4.14.y
    ("Revert "mlx5: move affinity hints assignments to generic code")

All above patches apply and compile with no issues on corresponding -stable.
===================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_copy_ubufs creates a private copy of frags[] to release its hold
on user frags, then calls uarg->callback to notify the owner.

Call uarg->callback even when no frags exist. This edge case can
happen when zerocopy_sg_from_iter finds enough room in skb_headlen
to copy all the data.

Fixes: 3ece7826 ("sock: skb_copy_ubufs support for compound pages")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate
calls to skb_uarg(skb)->callback for the same data.

skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb
with each segment. This is only safe for uargs that do refcounting,
which is those that pass skb_orphan_frags without dropping their
shared frags. For others, skb_orphan_frags drops the user frags and
sets the uarg to NULL, after which sock_zerocopy_clone has no effect.

Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback
calls for the same data causing the vhost_net_ubuf_ref_>refcount to
drop below zero.

Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com>
Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY")
Reported-by: NAndreas Hartmann <andihartmann@01019freenet.de>
Reported-by: NDavid Hill <dhill@redhat.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull block fixes from Jens Axboe:
 "It's been a few weeks, so here's a small collection of fixes that
  should go into the current series.

  This contains:

   - NVMe pull request from Christoph, with a few important fixes.

   - kyber hang fix from Omar.

   - A blk-throttl fix from Shaohua, fixing a case where we double
     charge a bio.

   - Two call_single_data alignment fixes from me, fixing up some
     unfortunate changes that went into 4.14 without being properly
     reviewed on the block side (since nobody was CC'ed on the
     patch...).

   - A bounce buffer fix in two parts, one from me and one from Ming.

   - Revert bdi debug error handling patch. It's causing boot issues for
     some folks, and a week down the line, we're still no closer to a
     fix. Revert this patch for now until it's figured out, then we can
     retry for 4.16"

* 'for-linus' of git://git.kernel.dk/linux-block:
  Revert "bdi: add error handle for bdi_debug_register"
  null_blk: unalign call_single_data
  block: unalign call_single_data in struct request
  block-throttle: avoid double charge
  block: fix blk_rq_append_bio
  block: don't let passthrough IO go into .make_request_fn()
  nvme: setup streams after initializing namespace head
  nvme: check hw sectors before setting chunk sectors
  nvme: call blk_integrity_unregister after queue is cleaned up
  nvme-fc: remove double put reference if admin connect fails
  nvme: set discard_alignment to zero
  kyber: fix another domain token wait queue hang

Pull KVM fixes from Paolo Bonzini:
 "ARM fixes:
   - A bug in handling of SPE state for non-vhe systems
   - A fix for a crash on system shutdown
   - Three timer fixes, introduced by the timer optimizations for v4.15

  x86 fixes:
   - fix for a WARN that was introduced in 4.15
   - fix for SMM when guest uses PCID
   - fixes for several bugs found by syzkaller

  ... and a dozen papercut fixes for the kvm_stat tool"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
  tools/kvm_stat: sort '-f help' output
  kvm: x86: fix RSM when PCID is non-zero
  KVM: Fix stack-out-of-bounds read in write_mmio
  KVM: arm/arm64: Fix timer enable flow
  KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state
  KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC
  KVM: arm/arm64: Fix HYP unmapping going off limits
  arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu
  KVM/x86: Check input paging mode when cs.l is set
  tools/kvm_stat: add line for totals
  tools/kvm_stat: stop ignoring unhandled arguments
  tools/kvm_stat: suppress usage information on command line errors
  tools/kvm_stat: handle invalid regular expressions
  tools/kvm_stat: add hint on '-f help' to man page
  tools/kvm_stat: fix child trace events accounting
  tools/kvm_stat: fix extra handling of 'help' with fields filter
  tools/kvm_stat: fix missing field update after filter change
  tools/kvm_stat: fix drilldown in events-by-guests mode
  tools/kvm_stat: fix command line option '-g'
  kvm: x86: fix WARN due to uninitialized guest FPU state
  ...

sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.

The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.

To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.

Note, this changes behavior a little bit. Before commit 42240901
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.

Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.

Fixes: 5108bbad ("openvswitch: add processing of L3 packets")
Signed-off-by: NEric Garver <e@erig.me>
Reviewed-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit a0747a85.

It breaks some booting for some users, and more than a week
into this, there's still no good fix. Revert this commit
for now until a solution has been found.
Reported-by: NLaura Abbott <labbott@redhat.com>
Reported-by: NBruno Wolff III <bruno@wolff.to>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, parameters such as oif and source address are not taken into
account during fibmatch lookup. Example (IPv4 for reference) before
patch:

$ ip -4 route show
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1

$ ip -6 route show
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium
fe80::/64 dev dummy0 proto kernel metric 256 pref medium
fe80::/64 dev dummy1 proto kernel metric 256 pref medium

$ ip -4 route get fibmatch 192.0.2.2 oif dummy0
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
$ ip -4 route get fibmatch 192.0.2.2 oif dummy1
RTNETLINK answers: No route to host

$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium

After:

$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
RTNETLINK answers: Network is unreachable

The problem stems from the fact that the necessary route lookup flags
are not set based on these parameters.

Instead of duplicating the same logic for fibmatch, we can simply
resolve the original route from its copy and dump it instead.

Fixes: 18c3a61c ("net: ipv6: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>