Consolidate the instdone logic so we can get a bit fancier. This patch also
removes the duplicated print of INSTDONE[0].

v2: (Imre)
- Rebased on top of hangcheck INSTDONE changes.
- Move all INSTDONE registers into a single struct, store it within the
  engine error struct during error capturing.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474379673-28326-1-git-send-email-imre.deak@intel.com

Reapply the PPS register unlock workaround after GPU reset on platforms
where the reset clobbers the display HW state. This at least gets rid of
the related WARN during LVDS encoder enabling on PNV.

Fixes: ed6143b8 ("drm/i915/lvds: Restore initial HW state during encoder enabling")
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473847453-4771-1-git-send-email-imre.deak@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Backlight enable is supposed to do a full setup of the backlight. We
were missing the PWM alternate increment bit in the south chicken
registers on lpt+ pch. This potentially caused a PWM frequency change
when the chicken register value was lost e.g. on suspend.

v2 by Jani, rebase on the patch caching alt increment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97486
References: https://bugs.freedesktop.org/show_bug.cgi?id=67454
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Wei Shun Chen <wei.shun.chang@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Cc: stable@vger.kernel.org # v4.4+ 32b421e7 drm/i915/backlight: setup and cache...
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShawn Lee <shawn.c.lee@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8265f5935bd31c039ddfc82819d26c2ca1ae9cba.1474281249.git.jani.nikula@intel.com

This will also be needed later on when setting up the alternate
increment in backlight enable.

Cc: Shawn Lee <shawn.c.lee@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9984b20bc59aee90b83caf59ce91f3fb122c9627.1474281249.git.jani.nikula@intel.com

Be a little paranoid in case the specs change or something.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/27050d48d0ff3d58e79fcacc41ced4c071b01424.1474286487.git.jani.nikula@intel.com

Leave behind some debugging clues in case some panels don't work
properly.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/b36302b24676af511f4bbf702be21cc7e8f987c2.1474286487.git.jani.nikula@intel.com

Based on the documentation alone, it's anyone's guess when exactly we
should be running these sequences. Add them where it feels logical. The
drm panel hooks don't currently offer us more granularity anyway.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/267c4a2bde2076af18e9b8335c0bef2e26ea3112.1474286487.git.jani.nikula@intel.com

Based on the documentation alone, it's anyone's guess when exactly we
should be running these sequences. Add power on/off sequences where they
feel logical and update assert/deassert reset. The drm panel hooks don't
currently offer us more granularity anyway.

v2: update assert/deassert reset as well (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1543320494df953fa073e136248238eaa1eed059.1474286487.git.jani.nikula@intel.com

In sequence block v3 these are gracefully skipped anyway, but add the
functions so we can have some debug breadcrumbs.

v2: the pmic block is 15 bytes (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d102ef1f21e6ea9a17655ef31593e68343336a48.1474286487.git.jani.nikula@intel.com

Just simple breadcrumbs for now. While at it, rename the i2c skip
function.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d11c40a99f5ef2419ede87a2ac1858e4c60768b8.1474286487.git.jani.nikula@intel.com

This is not interesting. They are not "missing", they are just not part
of the VBT sequences for the panel.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/54909b29802398d23f1d26f6589671e69688f904.1474286487.git.jani.nikula@intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix missing parameter description for DisplayPort branch device ID.
This fixes warning of "No description found for parameter 'id[6]'" when
creating documentation by 'make htmldocs'.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-September/106645.html
Fixes: 266d783b ("drm: Read DP branch device id")
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474022355-29990-1-git-send-email-mika.kahola@intel.com

Fix sparse warning:

drivers/gpu/drm/i915/i915_cmd_parser.c:987:72: warning: Using plain
integer as NULL pointer

Fixes: 52a42cec ("drm/i915/cmdparser: Accelerate copies from WC memory")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-4-git-send-email-jani.nikula@intel.com

Fixes sparse warning:

drivers/gpu/drm/i915/intel_dpll_mgr.c:1712:24: warning: Using plain
integer as NULL pointer

Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-2-git-send-email-jani.nikula@intel.com

Fix sparse warning:

drivers/gpu/drm/i915/intel_dp.c:1527:5: warning: symbol
'intel_dp_compute_bpp' was not declared. Should it be static?

Fixes: f9bb705e ("drm/i915: Update bits per component for display info")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-1-git-send-email-jani.nikula@intel.com

Read DisplayPort branch device info from through debugfs
interface.

v2: use drm_dp_helper routines to collect data
v3: cleanup to match the drm_dp_helper.c patches introduced
    earlier in this series
v4: move DP branch device info to function 'intel_dp_branch_device_info()'
v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel)
v6: read hw and sw revision without using specific drm_dp_helper routines
v7: indentation fixes (Jim Bride)
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-12-git-send-email-mika.kahola@intel.com

DisplayPort branch device may define max supported bits per
component. Update display info based on this value if bpc
is defined.

v2: cleanup to match the drm_dp_helper.c patches introduced
    earlier in this series
v3: Fill bpc for connector's display info in separate
    drm_dp_helper function (Daniel)
v4: remove updating bpc for display info as it may be overridden
    when parsing EDID. Instead, check bpc for DP branch device
    during compute_config
v5: Indentation fixes (Jim Bride)
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-11-git-send-email-mika.kahola@intel.com

Filter out a mode that exceeds the max pixel rate setting
for DP to VGA dongle. This is defined in DPCD register 0x81
if detailed cap info i.e. info field is 4 bytes long and
it is available for DP downstream port.

The register defines the pixel rate divided by 8 in MP/s.

v2: DPCD read outs and computation moved to drm (Ville, Daniel)
v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock()
    function (Daniel)
v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville)
v5: Use of intel_dp->downstream_ports to read out port capabilities.
    Code restructuring (Ville)
v6: Move DP branch device check to drm_dp_helper.c (Daniel)
v7: Cleanup as suggested by Ville
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-10-git-send-email-mika.kahola@intel.com

SW revision is mandatory field for DisplayPort branch
devices. This is defined in DPCD register fields 0x50A
and 0x50B.

v2: move drm_dp_ds_revision structure to be part of
    drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
    DPCD and print SW revision info to dmesg (Ville)
v4: commit message fix (Jim Bride)
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-9-git-send-email-mika.kahola@intel.com

HW revision is mandatory field for DisplayPort branch
devices. This is defined in DPCD register field 0x509.

v2: move drm_dp_ds_revision structure to be part of
    drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
    DPCD and print HW revision info to dmesg (Ville)
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-8-git-send-email-mika.kahola@intel.com

Let's remove reference to "struct intel_connector *connector"
in intel_dp_aux_init() function as it is no longer required.
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-7-git-send-email-mika.kahola@intel.com

Read DisplayPort branch device id string.
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-6-git-send-email-mika.kahola@intel.com

Helper routine to read out maximum supported bits per
component for DisplayPort legay converters.

v2: Return early if detailed port cap info is not available.
    Replace if-else ladder with switch-case (Ville)
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-5-git-send-email-mika.kahola@intel.com

Helper routine to read out maximum supported pixel rate
for DisplayPort legay VGA converter or TMDS clock rate
for other digital legacy converters. The helper returns
clock rate in kHz.

v2: Return early if detailed port cap info is not available.
    Replace if-else ladder with switch-case (Ville)
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-4-git-send-email-mika.kahola@intel.com

Drop "VGA" from bits per component definitions as these
are also used by other standards such as DVI, HDMI,
DP++.
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-3-git-send-email-mika.kahola@intel.com

Add missing DisplayPort downstream port types. The introduced
new port types are DP++ and Wireless.
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-2-git-send-email-mika.kahola@intel.com

Adding the ddb size into the devide info will avoid
platform checks while computing wm.

v2: Added comment and WARN_ON if ddb size is zero.(Jani)
v3: Added WARN_ON at the right place.(Jani)
Suggested-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473931870-7724-1-git-send-email-m.deepak@intel.com

Renaming to more consistent scheme, and updating comments, mostly
about i915_guc_wq_reserve(), aka i915_guc_wq_check_space().
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-4-git-send-email-david.s.gordon@intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Renaming to more consistent scheme, delete unused definitions
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-3-git-send-email-david.s.gordon@intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

No functional changes; just renaming a bit, tweaking a datatype,
prettifying layout, and adding comments, in particular in the
GuC setup code that touches this data.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-2-git-send-email-david.s.gordon@intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Commentary from Chris Wilson's original version:

> I was looking at some wait_for() timeouts on a slow system, with lots of
> debug enabled (KASAN, lockdep, mmio_debug). Thinking that we were
> mishandling the timeout, I tried to ensure that we loop at least once
> after first testing COND. However, the double test of COND either side
> of the timeout check makes that unlikely. But we can do an equivalent
> loop, that keeps the COND check after testing for timeout (required so
> that we are not preempted between testing COND and then testing for a
> timeout) without expanding COND twice.
>
> The advantage of only expanding COND once is a dramatic reduction in
> code size:
>
>    text	   data	    bss	    dec	    hex
>    1308733	   5184	   1152	1315069	 1410fd	before
>    1305341	   5184	   1152	1311677	 1403bd	after

but it turned out that due to a missing iniitialiser, gcc had "gone
wild trimming undefined code" :( This version acheives a rather more
modest (but still worthwhile) gain of ~550 bytes.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Original-idea-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zanoni, Paulo R <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473855033-26980-1-git-send-email-david.s.gordon@intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Turns out
commit a0562819 ("drm/i915: Get panel_type from OpRegion panel
details") has regressed quite a few machines. So it looks like we
can't use the panel type from OpRegion on all systems, and yet we
absolutely must use it on some specific systems.

Despite trying, I was unable to find any automagic way to determine
if the OpRegion panel type is respectable or not. The only glimmer
of hope I had was bit 8 in the SCIC response, but that turned out to
not work either (it was always 0 on both types of systems).

So, to fix the regressions without breaking the machine we know to need
the OpRegion panel type, let's just add a quirk for this. Only specific
machines known to require the OpRegion panel type will therefore use
it. Everyone else will fall bck to the VBT panel type.

The only known machine so far is a "Conrac GmbH IX45GM2". The PCI
subsystem ID on this machine is just a generic 8086:2a42, so of no use.
Instead we'll go with a DMI match.

I suspect we can now also revert
commit aeddda06 ("drm/i915: Ignore panel type from OpRegion on SKL")
but let's leave that to a separate patch.

v2: Do the DMI match in the opregion code directly, as dev_priv->quirks
    gets populated too late

Cc: Rob Kramer <rob@solution-space.com>
Cc: Martin van Es <martin@mrvanes.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Marco Krüger <krgsch@gmail.com>
Cc: Sean Greenslade <sean@seangreenslade.com>
Cc: Trudy Tective <bertslany@gmail.com>
Cc: Robin Müller <rm1990@gmx.de>
Cc: Alexander Kobel <a-kobel@a-kobel.de>
Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com>
Cc: Emil Andersen Lauridsen <mine809@gmail.com>
Cc: oceans112@gmail.com
Cc: James Hogan <james@albanarts.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html
References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363
Fixes: a0562819 ("drm/i915: Get panel_type from OpRegion panel details")
Tested-by: NMarco Krüger <krgsch@gmail.com>
Tested-by: NAlexey Shumitsky <alexey.shumitsky@gmail.com>
Tested-by: NSean Greenslade <sean@seangreenslade.com>
Tested-by: NEmil Andersen Lauridsen <mine809@gmail.com>
Tested-by: NRobin Müller <rm1990@gmx.de>
Tested-by: oceans112@gmail.com
Tested-by: NRob Kramer <rob@solution-space.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com
References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.comAcked-by: NJani Nikula <jani.nikula@intel.com>

This reverts

commit 1c80c25f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed May 18 18:47:12 2016 +0200

    drm/i915/psr: Make idle_frames sensible again

There are panels that needs 4 idle frames before entering PSR,
but VBT is unproperly set.

Also lately it was identified that idle frame count calculated at HW
can be off by 1, what makes the minimum of 2, at least.

Without the current vbt+1 we are with the risk of having HW calculating
0 idle frames and entering PSR when it shouldn't. Regardless the lack
of link training.

[Jani: there is some disagreement on the explanation, but the commit
regresses so revert it is.]

References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 1c80c25f ("drm/i915/psr: Make idle_frames sensible again")
Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473295351-8766-1-git-send-email-rodrigo.vivi@intel.com

This adds support for KBL in the new function added in commit ID:
commit <f169660e> that returns a
shared pll in case of DDI platforms.
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473728663-14355-1-git-send-email-manasi.d.navare@intel.com

drm already provides fallback versions of readq and writeq.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473451373-9852-1-git-send-email-matthew.auld@intel.com

Fix the number of tries in channel euqalization link training sequence
according to DP 1.2 Spec. It returns a boolean depending on channel
equalization pass or failure.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

This function cleans up clock recovery loop in link training compliant
tp Dp Spec 1.2. It tries the clock recovery 5 times for the same voltage
or until max voltage swing is reached and removes the additional non
compliant retries. This function now returns a boolean values based on
if clock recovery passed or failed.

v3:
* Better Debug prints in case of failures (Mika Kahola)
v2:
* Rebased on top of new revision of vswing patch (Manasi Navare)
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Wrap the max. vswing check in a separate function.
This makes the clock recovery phase of DP link training cleaner

v3:
Fixed the paranthesis warning (Mika Kahola)
v2:
Fixed the Compiler warning (Mika Kahola)
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Add the PLL selection code for HSW/BDW/BXT/SKL into a stand-alone function
in order to allow for the implementation of a platform neutral upfront
link training function.

v4:
* Removed dereferencing NULL pointer in  case of failure (Dhinakaran Pandiyan)
v3:
* Add Hooks for all DDI platforms into this standalone function

v2:
* Change the macro to use dev_priv instead of dev (David Weinehall)
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>