This patch adds a new vcpu->requests bit, KVM_REQ_IMMEDIATE_EXIT.
This bit requests that when next entering the guest, we should run it only
for as little as possible, and exit again.

We use this new option in nested VMX: When L1 launches L2, but L0 wishes L1
to continue running so it can inject an event to it, we unfortunately cannot
just pretend to have run L2 for a little while - We must really launch L2,
otherwise certain one-off vmcs12 parameters (namely, L1 injection into L2)
will be lost. So the existing code runs L2 in this case.
But L2 could potentially run for a long time until it exits, and the
injection into L1 will be delayed. The new KVM_REQ_IMMEDIATE_EXIT allows us
to request that L2 will be entered, as necessary, but will exit as soon as
possible after entry.

Our implementation of this request uses smp_send_reschedule() to send a
self-IPI, with interrupts disabled. The interrupts remain disabled until the
guest is entered, and then, after the entry is complete (often including
processing an injection and jumping to the relevant handler), the physical
interrupt is noticed and causes an exit.

On recent Intel processors, we could have achieved the same goal by using
MTF instead of a self-IPI. Another technique worth considering in the future
is to use VM_EXIT_ACK_INTR_ON_EXIT and a highest-priority vector IPI - to
slightly improve performance by avoiding the useless interrupt handler
which ends up being called when smp_send_reschedule() is used.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

RC6 fails again.

> I found my system freeze mostly during starting up X and KDE. Sometimes it
> works for some minutes, sometimes it freezes immediatly. When the freeze
> happens, everything is dead (even the reset button does not work, I need to
> power cycle).

> I disabled RC6, and my system runs wonderfully.

> The system is a Z68 Pro board with Sandybridge i5-2500K processor, 8
> GB of RAM and UEFI firmware.
Reported-by: NKai Krakow <hurikhan77@gmail.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Semaphores still cause problems on some machines:

> From Udo Steinberg:
>
> With Linux-3.2-rc6 I'm frequently seeing GPU hangs when large amounts of
> text scroll in an xterm, such as when extracting a tar archive. Such as this
> one (note the timestamps):
>
>  I can reproduce it fairly easily with something
>  as simple as:
>
>	  while true; do dmesg; done

This patch turns them off on SNB while leaving them on for IVB.
Reported-by: NUdo Steinberg <udo@hypervisor.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eugeni Dodonov <eugeni@dodonov.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: e500: include linux/export.h
  KVM: PPC: fix kvmppc_start_thread() for CONFIG_SMP=N
  KVM: PPC: protect use of kvmppc_h_pr
  KVM: PPC: move compute_tlbie_rb to book3s_64 common header
  KVM: Don't automatically expose the TSC deadline timer in cpuid
  KVM: Device assignment permission checks
  KVM: Remove ability to assign a device without iommu support
  KVM: x86: Prevent starting PIT timers in the absence of irqchip support

post 3.2-rc7 pull request

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  MAINTAINERS: firewire git URL update

Bruce Fields notes that commit 778fc546 ("locks: fix tracking of
inprogress lease breaks") introduced a possible error pointer
dereference on failure to allocate memory.  locks_conflict() will
dereference the passed-in new lease lock structure that may be an error pointer.

This means an open (without O_NONBLOCK set) on a file with a lease
applied (generally only done when Samba or nfsd (with v4) is running)
could crash if a kmalloc() fails.

So instead of playing games with IS_ERROR() all over the place, just
check the allocation failure early.  That makes the code more
straightforward, and avoids this possible bad pointer dereference.
Based-on-patch-by: NJ. Bruce Fields <bfields@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is required for THIS_MODULE.  We recently stopped acquiring
it via some other header.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently kvmppc_start_thread() tries to wake other SMT threads via
xics_wake_cpu().  Unfortunately xics_wake_cpu only exists when
CONFIG_SMP=Y so when compiling with CONFIG_SMP=N we get:

  arch/powerpc/kvm/built-in.o: In function `.kvmppc_start_thread':
  book3s_hv.c:(.text+0xa1e0): undefined reference to `.xics_wake_cpu'

The following should be fine since kvmppc_start_thread() shouldn't
called to start non-zero threads when SMP=N since threads_per_core=1.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

kvmppc_h_pr is only available if CONFIG_KVM_BOOK3S_64_PR.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

compute_tlbie_rb is only used on ppc64 and cannot be compiled on ppc32.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Unlike all of the other cpuid bits, the TSC deadline timer bit is set
unconditionally, regardless of what userspace wants.

This is broken in several ways:
 - if userspace doesn't use KVM_CREATE_IRQCHIP, and doesn't emulate the TSC
   deadline timer feature, a guest that uses the feature will break
 - live migration to older host kernels that don't support the TSC deadline
   timer will cause the feature to be pulled from under the guest's feet;
   breaking it
 - guests that are broken wrt the feature will fail.

Fix by not enabling the feature automatically; instead report it to userspace.
Because the feature depends on KVM_CREATE_IRQCHIP, which we cannot guarantee
will be called, we expose it via a KVM_CAP_TSC_DEADLINE_TIMER and not
KVM_GET_SUPPORTED_CPUID.

Fixes the Illumos guest kernel, which uses the TSC deadline timer feature.

[avi: add the KVM_CAP + documentation]
Reported-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Only allow KVM device assignment to attach to devices which:

 - Are not bridges
 - Have BAR resources (assume others are special devices)
 - The user has permissions to use

Assigning a bridge is a configuration error, it's not supported, and
typically doesn't result in the behavior the user is expecting anyway.
Devices without BAR resources are typically chipset components that
also don't have host drivers.  We don't want users to hold such devices
captive or cause system problems by fencing them off into an iommu
domain.  We determine "permission to use" by testing whether the user
has access to the PCI sysfs resource files.  By default a normal user
will not have access to these files, so it provides a good indication
that an administration agent has granted the user access to the device.

[Yang Bai: add missing #include]
[avi: fix comment style]
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NYang Bai <hamo.by@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This option has no users and it exposes a security hole that we
can allow devices to be assigned without iommu protection.  Make
KVM_DEV_ASSIGN_ENABLE_IOMMU a mandatory option.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

User space may create the PIT and forgets about setting up the irqchips.
In that case, firing PIT IRQs will crash the host:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm]
...
Call Trace:
 [<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm]
 [<ffffffff81071431>] process_one_work+0x111/0x4d0
 [<ffffffff81071bb2>] worker_thread+0x152/0x340
 [<ffffffff81075c8e>] kthread+0x7e/0x90
 [<ffffffff815a4474>] kernel_thread_helper+0x4/0x10

Prevent this by checking the irqchip mode before starting a timer. We
can't deny creating the PIT if the irqchips aren't set up yet as
current user land expects this order to work.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create()
  drm/radeon/kms: bail on BTC parts if MC ucode is missing

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Fix race between CPU hotplug and lglocks

for linus: writeback reason binary tracing format fix

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: show writeback reason with __print_symbolic

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: adapt update-po-config to new UML layout

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: call d_instantiate after all ops are setup
  Btrfs: fix worker lock misuse in find_worker

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: xt_connbytes: handle negation correctly
  net: relax rcvbuf limits
  rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
  net: introduce DST_NOPEER dst flag
  mqprio: Avoid panic if no options are provided
  bridge: provide a mtu() method for fake_dst_ops

"! --connbytes 23:42" should match if the packet/byte count is not in range.

As there is no explict "invert match" toggle in the match structure,
userspace swaps the from and to arguments
(i.e., as if "--connbytes 42:23" were given).

However, "what <= 23 && what >= 42" will always be false.

Change things so we use "||" in case "from" is larger than "to".

This change may look like it breaks backwards compatibility when "to" is 0.
However, older iptables binaries will refuse "connbytes 42:0",
and current releases treat it to mean "! --connbytes 0:42",
so we should be fine.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This closes races where btrfs is calling d_instantiate too soon during
inode creation.  All of the callers of btrfs_add_nondir are updated to
instantiate after the inode is fully setup in memory.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Dan Carpenter noticed that we were doing a double unlock on the worker
lock, and sometimes picking a worker thread without the lock held.

This fixes both errors.
Signed-off-by: NChris Mason <chris.mason@oracle.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>

skb->truesize might be big even for a small packet.

Its even bigger after commit 87fb4b7b (net: more accurate skb
truesize) and big MTU.

We should allow queueing at least one packet per receiver, even with a
low RCVBUF setting.
Reported-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will
cause a kernel oops due to insufficient bounds checking.

	if (count > 1<<30) {
		/* Enforce a limit to prevent overflow */
		return -EINVAL;
	}
	count = roundup_pow_of_two(count);
	table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count));

Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as:

	... + (count * sizeof(struct rps_dev_flow))

where sizeof(struct rps_dev_flow) is 8.  (1 << 30) * 8 will overflow
32 bits.

This patch replaces the magic number (1 << 30) with a symbolic bound.
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>]
ipv6_select_ident+0x31/0xa7

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[nf_conntrack_ipv6]
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[bridge]
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[bridge]
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[bridge]
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[bridge]
[  461.704616]  [<ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[bridge]
[  461.719490]  [<ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56
[bridge]

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.
Reported-by: NChris Boot <bootc@bootc.net>
Tested-by: NChris Boot <bootc@bootc.net>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.
Signed-off-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 618f9bc7 (net: Move mtu handling down to the protocol
depended handlers) forgot the bridge netfilter case, adding a NULL
dereference in ip_fragment().
Reported-by: NChris Boot <bootc@bootc.net>
CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://neil.brown.name/md:
  md/bitmap: It is OK to clear bits during recovery.
  md: don't give up looking for spares on first failure-to-add
  md/raid5: ensure correct assessment of drives during degraded reshape.
  md/linear: fix hot-add of devices to linear arrays.

commit d0a4bb49 introduced a
regression which is annoying but fairly harmless.

When writing to an array that is undergoing recovery (a spare
in being integrated into the array), writing to the array will
set bits in the bitmap, but they will not be cleared when the
write completes.

For bits covering areas that have not been recovered yet this is not a
problem as the recovery will clear the bits.  However bits set in
already-recovered region will stay set and never be cleared.
This doesn't risk data integrity.  The only negatives are:
 - next time there is a crash, more resyncing than necessary will
   be done.
 - the bitmap doesn't look clean, which is confusing.

While an array is recovering we don't want to update the
'events_cleared' setting in the bitmap but we do still want to clear
bits that have very recently been set - providing they were written to
the recovering device.

So split those two needs - which previously both depended on 'success'
and always clear the bit of the write went to all devices.
Signed-off-by: NNeilBrown <neilb@suse.de>

Before performing a recovery we try to remove any spares that
might not be working, then add any that might have become relevant.

Currently we abort on the first spare that cannot be added.
This is a false optimisation.
It is conceivable that - depending on rules in the personality - a
subsequent spare might be accepted.
Also the loop does other things like count the available spares and
reset the 'recovery_offset' value.

If we abort early these might not happen properly.

So remove the early abort.

In particular if you have an array what is undergoing recovery and
which has extra spares, then the recovery may not restart after as
reboot as the could of 'spares' might end up as zero.
Reported-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NNeilBrown <neilb@suse.de>

While reshaping a degraded array (as when reshaping a RAID0 by first
converting it to a degraded RAID4) we currently get confused about
which devices are in_sync.  In most cases we get it right, but in the
region that is being reshaped we need to treat non-failed devices as
in-sync when we have the data but haven't actually written it out yet.
Reported-by: NAdam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

commit d70ed2e4
broke hot-add to a linear array.
After that commit, metadata if not written to devices until they
have been fully integrated into the array as determined by
saved_raid_disk.  That patch arranged to clear that field after
a recovery completed.

However for linear arrays, there is no recovery - the integration is
instantaneous.  So we need to explicitly clear the saved_raid_disk
field.
Signed-off-by: NNeilBrown <neilb@suse.de>

This silently was working for many years and stopped working on
Niagara-T3 machines.

We need to set the MSIQ to VALID before we can set it's state to IDLE.

On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL
errors.  The hypervisor documentation says, rather ambiguously, that
the MSIQ must be "initialized" before one can set the state.

I previously understood this to mean merely that a successful setconf()
operation has been performed on the MSIQ, which we have done at this
point.  But it seems to also mean that it has been set VALID too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix usb/isp1760 build on sparc
  usb: gadget: epautoconf: do not change number of streams
  usb: dwc3: core: fix cached revision on our structure
  usb: musb: fix reset issue with full speed device