This patch replaces the old timing setup code with a redesigned one.
The new code might be slightly faster as it has no conditinals and
does not write the same register multiple times. Also it makes the
comparison to the documentation easier.
Regressions are unlikely but could happen as a lot of hardware is
undocumented.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

We do not need viafb_second{,_virtual}_{xres,yres} outside of
viafbdev.c so move them there and eliminate the virtual ones where
the only sane usage is done during initalization.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch is a huge move operation with some rename and introduces
an interface to still use the functions. This should be a step in
the right direction to reuse the code whenever possible but cleanly
separate code that differs on different platform and keeping the
complexity as low as possible.
pll_config was renamed to via_pll_config to keep the naming scheme.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

As no caller is interested in the result call viafb_get_clk_value
directly from viafb_set_vclock to encapsulate the hardware dependend
stuff there.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch allows calculating the pll multiplier within limits based
on the previous table. All available information supports that it
should be possible/sane to choose the multiplier free within some
ranges.
Storing the multiplier ranges instead of lots of pll configurations
reduces the memory needed and may as well improve the performance.
It is also expected to provide better pll values resulting in better
frequencies for the connected devices.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch fixes multiple issues with the handling of refresh rates
especially for multi-display setups. If you experienced problems
with wrong refresh rates this patch might fix them.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Before this patch only clocks that perfectly match were used and if
none existed this was not handled properly. This patch changes this
to always use the closest clock supported. This should behave like
before for clocks that have a perfect match but be much saner for
clocks which are slightly off.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds basic support for the new VX900 IGP. Almost everything
that was implemented for other IGPs is expected to work also on VX900
after this patch. The only known issue is that on the CRT output mode
setting does not always work.
It is clear that the possibility for regressions is zero.

A big thanks to VIA Technologies for making this possible and
supporting this work.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jonathan Corbet <corbet@lwn.net>

Now it looks like we finally know enough about the output devices to give
them proper names. As VIA_96 is often referred to as DVP0 rename it to
VIA_DVP0. As VIA_6C and VIA_93 seem to exist only on CLE266 and "replace"
DVP0 and DVP1 there rename them to VIA_LDVP0 and VIA_LDVP1 (L as legacy).
The proc names were changed accordingly which should be harmless as they
were just introduced and not beyond RFC state.
This patch should make things a bit more comfortable and less scary.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Andrew Morton <akpm@linux-foundation.org>

At the moment only the sync polarity for CRT is handled but there are
also bits for controlling the sync polarity for other output devices.
Add a function to change those similar to the other output device
functions.
There is no runtime change yet as the code still handles only CRT.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

This patch moves common parts of dvi.c, lcd.c and vt1636.c to hw.c to
start a per output device power management. There should be no runtime
changes aside that this patch enables the proc interface to enable/disable
devices when needed which greatly increases the chances that changes to
the output device configuration will work. However the power management is
not yet complete so it might fail on some configurations. As this area is
quite complex and touches undocumented things there is a slight chance of
regressions.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

This patch extends the proc entry to contain a possibility to view and
change the output devices for each IGA. This is useful for debugging
output problems as it provides a reliable way to query which low level
devices are active after VIAs output device configuration nightmare
happended. It's as well suitable for daily use as one can change the
output configuration on the fly for example to connect a projector.
At the moment it's still unstable. The reason is that we have to handle
a bunch of undocumented output devices (those without a proper name) and
that this patch is the first step to collect and verify the needed
information. Basically the only configuration change that is expected to
work at the moment is switching output devices between IGA1 and IGA2.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Andrew Morton <akpm@linux-foundation.org>

This patch merges the remaining functionality of the output path
function in the associated enabling functions. This is very natural as
most of the remaining code does actually enable the device.
Just some more or less intelligent code merge. If no stupid mistakes
occured there should be no regressions.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

This patch adds a new output device management that stores for each
IGA which output devices are routed to it and a compatiblity layer
that converts the old per-output device values in the new format.
Bounding the output devices to each IGA is a central idea of the
cleanup. Doing it this way should be easier and make much more sense
than the old format which happily mixed different output devices
together and did not even take into account that some devices are no
longer available on newer chipsets.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

There are a lot of init functions which are not marked as such.
Fix this.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

viafb: PLL value cleanup

This is a big change of how PLL values are handled on the road to
dynamic PLL value generation. The table was converted automatically in
the relevant parameters for frequency generation. Sadly there were some
bits set whose meaning is unknown. Those differences are documented
but ignored as the unichrome code implies that they are not important
(a big thanks to Luc for his amazing work).
The PLL values for 31490000 and 133308000 are deleted as they were more
than 5% off and not used anyway. The values for CX700@60466000 and
VX855@153920000 are corrected as they were wrong and easily correctable
as enough correct values was available because CX700 and VX855 support
the same values only with a little difference in hardware format.
All remaining values are not more than 2% off.
Additionally the surrounding code is changed as needed especially the
byte order of the values written to hardware to allow nicer conversion
functions.
This is mostly a change preparing for dynamic PLL generation and the two
corrected values aside no runtime change is expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>

Preparatory move toward the ultimate goal of moving pan-subdevice stuff
into include/linux.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

viafb: move some modesetting functions to a seperate file

This patch moves the modesetting functions which are already cleaned up
to a seperate file.
Just the beginning to bring some structure in this mess.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: unify modesetting functions

This patch unifies some cleaned up modesetting functions to prepare for
moving them to an extra file. This includes make them use via_io and
changing there names to reflect that they do not depend on anything
framebuffer specific.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch puts redesigned versions of the basic io functions that
are used overall the driver in an extra header. It is prefixed with
via_ as no framebuffer dependend stuff is in there. They were inlined
as they are really simple which reduced the module size about 2.5%.
The parameter order of read and write was fixed as it really doesn't
make sense to change the order as they are parts of the same address
and not source and destination.
Wrapper which use the new functions were added to hw.h to replicate
the old interface and avoid changing all old code.

[jc: added one comment]
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch moves data of interest into a new viafb_dev structure which
describes the device as a whole; the idea here is to create a separation
between what all devices may need and what the framebuffer device in
particular needs.

I've also made some small steps toward thinning out the global.h mess.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This patch alters viafb to use the proper Linux in-kernel API to access
PCI configuration space, rather than poking at I/O ports by itself.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>

This is a rewritten version of viafb_setcolreg.  The hardware register
writes were split up and moved to hw.c where they belong as this is really
low level stuff.  It was made dual fb aware.

Furthermore viafb_setcmap was removed as the problem with 8bpp originated
from a bug in writing multiple color registers at once.  The removal of
viafb_setcmap might introduce a small performance regression but its
certainly better to receive the correct result a bit slower than a garbled
picture fast.  It should give us a working 8bpp mode and is more
extensible than the old hardcoded code.  No other regressions are expected
but as the hardware might be a bit picky it might cause some regressions
in 8bpp mode on some hardware although I doubt that.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move some variables closer to their usage.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch splits color mode setting up in seperate functions.  Some
hardware initialization that was previously mixed with it is moved to
viafb_setmode.  As are the calls to the newly created function.  This is
yet another little step towards controlling each IGA on its own.

As this patch really aims too mimic the old behaviour no regressions are
expected.  However I noticed that 8bpp (or 6bpp?) seems actually a bit
broken before and after the patch.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the first step to remove an artificial global index that was used
in two ways:

1. As a pseudo index in the mode table.  Pseudo as you had to search
   through the table to find the referenced entry.  This was replaced by
   using a pointer to the entry.

2. As a shortcut to compare a combination of horizontal and vertical
   resolution at the same time.

   This was replaced by a "(hres<<16) | vres" which is good enough for
   now and the near future.  If vres or hres become greater than 2^16 this
   might indeed cause problems but this solution allows to split this
   indexing mess up without the requirement to do even more code changes.

This is a big change that will allow more clean ups.  It should be a bit
faster but that is probably not relevant for normal operation.  No
regressions expected but as this is a relatively big step heavy testing is
appreciated.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for a new VIA integrated graphics chipset, the VX855.
Signed-off-by: NHaraldWelte <HaraldWelte@viatech.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The main motivation of this patch was to merge the three initialization
functions in one and clean it up. However as some changes in other code
areas where needed to do it right some small other changes were made.

Changes to viafb_par:

io_virt renamed as engine_mmio and moved to shared
VQ_start renamed as vq_vram_addr and moved to shared
VQ_end removed as it is easily recalculatable

vq_vram_addr is not strictly needed but keep it to track where we
allocated video memory.  The memory allocated for the virtual queue was
shrunk to VQ_SIZE as VQ_SIZE+CURSOR_SIZE looked like a bug to me.  But to
be honest I don't have the faintest idea what virtual queues are for in
the graphic hardware and whether the driver needs them in any way.  I only
know that they aren't directly accessed by the driver and so the only
potential current use would be as hardware internal buffers.  For now keep
them to avoid regressions and only remove the double cursor allocation.

The most changes were caused by renames and the mentioned structure
changes so the chance of regressions is pretty low.  The meaning of
viafb_accel changed slightly as previously it was changed back and forth
in the code and allowed to enable the hardware acceleration by software if
previously disabled.  The new behaviour is that viafb_accel=0 always
prevents hardware acceleration.  With viafb_accel!=0 the acceleration can
be freely choosen by set_var.  This means viafb_accel is a diagnostic tool
and if someone has to use viafb_accel=0 the driver needs to be fixed.

As this is mostly a code cleanup no regressions beside the slightly change
of viafb_accel is expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split the pitch handling up and replaces the calculation from virtual xres
and bpp with fix.line_length which already contains the pitch and does not
add any constrains for the virtual resolution.

Also add a bit to the second pitch which the documentation mentions but
which was ignored by the driver.

Although it is a bit unclear what the right pitch for some LCD modes is
this patch should have no negative runtime impact.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes the completly useless io variable as well as the temporary
used variables mmio_base and mmio_len in favor to use directly the fb_info
variables.

This is a code cleanup only, no runtime change expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move individual start address setting to viafb_set_primary_address and
viafb_set_secondary_address and make it more flexible to reuse it for
panning.  Using central functions makes it easier to follow HW
manipulations.

Remove crt locking as it should be only needed for timing manipulation.
Move iga_path manipulation to via_pci_probe.

Remove memset for screen cleaning as it is currently done only for the
second screen.  This is not needed for normal operation but has a little
chance of causing unwanted display artifacts.  This can be fixed later
more consistent and more efficient (using viafb_fillrect) if needed.

This is a code clenup, no notable runtime changes expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Display HW setting and other chips initialization.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJoseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>