- 09 11月, 2005 8 次提交
-
-
由 Suzanne Wood 提交于
Acked-by: <paulmck@us.ibm.com> Signed-off-by: NSuzanne Wood <suzannew@cs.pdx.edu> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
With this, raid5 can be asked to check parity without repairing it. It also keeps a count of the number of incorrect parity blocks found (mismatches) and reports them through sysfs. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
You can trigger a 'check' with echo check > /sys/block/mdX/md/scan_mode or a check-and-repair errors with echo repair > /sys/block/mdX/md/scan_mode and read the current state from the same file. Note: personalities need to know the different between 'check' and 'repair', but don't yet. Until they do, 'check' will be the same as 'repair' and will just do a normal resync pass. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
/sys/block/mdX/md/raid5/ contains raid5-related attributes. Currently stripe_cache_size is number of entries in stripe cache, and is settable. stripe_cache_active is number of active entries, and in only readable. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Each device in an md array how has a corresponding /sys/block/mdX/md/devNN/ directory which can contain attributes. Currently there is only 'state' which summarises the state, nd 'super' which has a copy of the superblock, and 'block' which is a symlink to the block device. Also, /sys/block/mdX/md/rdNN represents slot 'NN' in the array, and is a symlink to the relevant 'devNN'. Obviously spare devices do not have a slot in the array, and so don't have such a symlink. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Start using kobjects in mddevs, and provide a couple of simple attributes (level and disks). Attributes live in /sys/block/mdX/md/attr-name Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This patch changes the behaviour of raid5 when it gets a read error. Instead of just failing the device, it tried to find out what should have been there, and writes it over the bad block. For some media-errors, this has a reasonable chance of fixing the error. If the write succeeds, and a subsequent read succeeds as well, raid5 decided the address is OK and conitnues. Instead of failing a drive on read-error, we attempt to re-write the block, and then re-read. If that all works, we allow the device to remain in the array. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 1 次提交
-
-
由 Nishanth Aravamudan 提交于
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 11月, 2005 1 次提交
-
-
由 Jens Axboe 提交于
Instead of having ->read_sectors and ->write_sectors, combine the two into ->sectors[2] and similar for the other fields. This saves a branch several places in the io path, since we don't have to care for what the actual io direction is. On my x86-64 box, that's 200 bytes less text in just the core (not counting the various drivers). Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 30 10月, 2005 1 次提交
-
-
由 David Hardeman 提交于
This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: NDavid Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 28 10月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 10月, 2005 1 次提交
-
-
由 NeilBrown 提交于
There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 10月, 2005 1 次提交
-
-
由 NeilBrown 提交于
The main problem fixes is that in certain situations stopping md arrays may take longer than you expect, or may require multiple attempts. This would only happen when resync/recovery is happening. This patch fixes three vaguely related bugs. 1/ The recent change to use kthreads got the setting of the process name wrong. This fixes it. 2/ The recent change to use kthreads lost the ability for md threads to be signalled with SIG_KILL. This restores that. 3/ There is a long standing bug in that if: - An array needs recovery (onto a hot-spare) and - The recovery is being blocked because some other array being recovered shares a physical device and - The recovery thread is killed with SIG_KILL Then the recovery will appear to have completed with no IO being done, which can cause data corruption. This patch makes sure that incomplete recovery will be treated as incomplete. Note that any kernel affected by bug 2 will not suffer the problem of bug 3, as the signal can never be delivered. Thus the current 2.6.14-rc kernels are not susceptible to data corruption. Note also that if arrays are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't occur. It only happens if a SIGKILL is independently delivered as done by 'init' when shutting down. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 10月, 2005 1 次提交
-
-
由 Al Viro 提交于
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 9月, 2005 2 次提交
-
-
由 Alasdair G Kergon 提交于
When creating a multipath device, if the queue_if_no_path parameter is specified it gets ignored. While the queue_if_no_path variable is correctly set to 1, the saved_queue_if_no_path gets set to 0. When the device is subsequently made live (resumed), the saved value (0) always overwrites the live value (1) so the option *always* gets turned off. The fix adds a parameter to the queue_if_no_path() function to indicate whether the previous value should be preserved or not - if not, as when the device is being set up, the saved value is set to the new value (1). Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 goggin, edward 提交于
If anything is waiting on a device's table when the device is removed, we must first wake it up so it will release its reference. Otherwise the table's reference count will not drop to zero and the table will not get removed. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 9月, 2005 1 次提交
-
-
由 H. Peter Anvin 提交于
This patch fixes a signedness bug with RAID6 for Altivec, and makes the Altivec code testable in userspace. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 9月, 2005 2 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 20 次提交
-
-
由 NeilBrown 提交于
This shouldn't be a BUG. We should cope. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
[PATCH] md: make sure the new 'sb_size' is set properly device added without pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Just like failed drives have (F), so spare drives now have (S). Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
On reflection, a better default location for hot-adding bitmaps with version-1 superblocks is immediately after the superblock. There might not be much room there, but there is usually atleast 3k, and that is a good start. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The bitmap code used to have two daemons, so there is some 'common' start/stop code. But now there is only one, so the common code is just noise. This patch tidies this up somewhat. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
mddev->bitmap gets clearred before the writeback daemon is stopped. So the write_back daemon needs to be careful not to dereference the 'bitmap' if it is NULL. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Switch MD to use the kthread infrastructure, to simplify the code and get rid of tasklist_lock abuse in md_unregister_thread. Also don't flush signals in md_thread, as the called thread will always do that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
This is a direct port of the raid5 patch. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-