Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 2月, 2017 6 次提交
    • V
      perf symbols: Take into account symfs setting when reading file build ID · 9b200653
      由 Victor Kamensky 提交于 
      After commit 5baecbcd ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option.  One can see message like this:

  bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols

It happens because code added by 5baecbcd opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.

Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.

Also note in latter tree after 5baecbcd commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.
Signed-off-by: NVictor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9b200653
    • A
      perf list: Add debug support for outputing alias string · f2361024
      由 Andi Kleen 提交于 
      For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure.  For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.

Before:

% perf list
...
cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]

After

% perf list --debug
...
cache:
  l1d.replacement
       [L1D data line replacements]
        cpu/umask=0x1,period=2000003,event=0x51/
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]
        cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f2361024
    • A
      perf pmu: Support event aliases for non cpu// pmus · 231bb2aa
      由 Andi Kleen 提交于 
      The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.

This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias.  This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      231bb2aa
    • A
      perf pmu: Support per pmu json aliases · 15b22ed3
      由 Andi Kleen 提交于 
      Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU.  Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).

To avoid printing the events multiple times in perf list filter out
duplicated events during printing.

v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      15b22ed3
    • A
      perf jevents: Add support for parsing uncore json files · fedb2b51
      由 Andi Kleen 提交于 
      Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.

Handle the "ExtSel" field, which just extends the event mask with an
additional bit.

Handle the "Filter" field which adds parameters to the main event
to configure filtering.

Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)

Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)

Then output the fields into the pmu-events data structures which are
compiled into perf.

Filter out zero fields, except for the event itself.

v2: Fix compilation. Add uncore_ prefix at pre-processing time.
    Move eventcode change to separate patch.

v3: Remove extra __maybe_unused

v4: dont duplicate aliases for cpu pmu events
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fedb2b51
    • H
      perf bpf: Add missing newline in debug messages · 4d416436
      由 He Kuang 提交于 
      These two debug messages are missing the trailing newline.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-2-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4d416436
  3. 02 2月, 2017 2 次提交
  5. 01 2月, 2017 3 次提交
  7. 27 1月, 2017 2 次提交
    • A
      perf tools: Propagate perf_config() errors · ecc4c561
      由 Arnaldo Carvalho de Melo 提交于 
      Previously these were being ignored, sometimes silently.

Stop doing that, emitting debug messages and handling the errors.

Testing it:

  $ cat ~/.perfconfig
  cat: /home/acme/.perfconfig: No such file or directory
  $ perf stat -e cycles usleep 1

   Performance counter stats for 'usleep 1':

           938,996      cycles:u

       0.003813731 seconds time elapsed

  $ perf top --stdio
  Error:
  You may not have permission to collect system-wide stats.

  Consider tweaking /proc/sys/kernel/perf_event_paranoid,
  <SNIP>
  [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
  [acme@jouet linux]$ perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  # Overhead  Command  Shared Object      Symbol
  # ........  .......  .................  .........................
    71.77%  usleep   libc-2.24.so       [.] _dl_addr
    27.07%  usleep   ld-2.24.so         [.] _dl_next_ld_env_entry
     1.13%  usleep   [kernel.kallsyms]  [k] page_fault
  $
  $ touch ~/.perfconfig
  $ ls -la ~/.perfconfig
  -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
  $
  $ perf stat -e instructions usleep 1

   Performance counter stats for 'usleep 1':

           244,610      instructions:u

       0.000805383 seconds time elapsed

  $
  [root@jouet ~]# chown acme.acme ~/.perfconfig
  [root@jouet ~]# perf stat -e cycles usleep 1
    Warning: File /root/.perfconfig not owned by current user or root, ignoring it.

   Performance counter stats for 'usleep 1':

           937,615      cycles

       0.000836931 seconds time elapsed
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ecc4c561
    • A
      perf config: Do not consider an error not to have any perfconfig file · afc45cf5
      由 Arnaldo Carvalho de Melo 提交于 
      While propagating the errors from perf_config(), which were being
completely ignored, everything stopped working for people without a
~/.perfconfig file, because the perf_config_set__init() was considering
an error not to have a .perfconfig file, duh, fix it by checking the
errno after the failed stat() call.

It should also not return an error when it says it is ignoring the file,
and also a empty file should not return an error either.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8beeb00f ("perf config: Use new perf_config_set__init() to initialize config set")
Link: http://lkml.kernel.org/n/tip-ygpbab3apbs6l8wr97xedwks@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      afc45cf5
  9. 26 1月, 2017 5 次提交
  11. 18 1月, 2017 1 次提交
  13. 17 1月, 2017 6 次提交
    • S
      perf evlist: Fix typo in deliver_sample() · d94386f2
      由 Soramichi AKIYAMA 提交于 
      This patch fixes a typo: s/delievery/delivery/
Signed-off-by: NSoramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170117222233.dfd92de0ad701e7c53396950@m.soramichi.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d94386f2
    • S
      perf tools: Move two variables usied in libperf from perf.c · d25ed5d9
      由 Soramichi AKIYAMA 提交于 
      The use_browser and perf_version_string variables are both declared in
perf.c but they are also referenced by other functions of libperf.a.

Therefore a user linking an own main() with libperf.a must declare those
two variables in their files even if the files never use the browser or
the version information.

This patch fixes this issue by moving use_browser and
perf_version_string out of perf.c to some other files.
Signed-off-by: NSoramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170117002237.c1aec0ce3b4d675dca018deb@m.soramichi.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d25ed5d9
    • M
      perf probe: Fix to probe on gcc generated functions in modules · 613f050d
      由 Masami Hiramatsu 提交于 
      Fix to probe on gcc generated functions on modules. Since
probing on a module is based on its symbol name, it should
be adjusted on actual symbols.

E.g. without this fix, perf probe shows probe definition
on non-exist symbol as below.

  $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range*
  in_range.isra.12
  $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
  p:probe/in_range nf_nat:in_range+0

With this fix, perf probe correctly shows a probe on
gcc-generated symbol.

  $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
  p:probe/in_range nf_nat:in_range.isra.12+0

This also fixes same problem on online module as below.

  $ perf probe -m i915 -D assert_plane
  p:probe/assert_plane i915:assert_plane.constprop.134+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      613f050d
    • M
      perf probe: Add error checks to offline probe post-processing · 3e96dac7
      由 Masami Hiramatsu 提交于 
      Add error check codes on post processing and improve it for offline
probe events as:

 - post processing fails if no matched symbol found in map(-ENOENT)
   or strdup() failed(-ENOMEM).

 - Even if the symbol name is the same, it updates symbol address
   and offset.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3e96dac7
    • M
      perf probe: Fix to show correct locations for events on modules · d2d4edbe
      由 Masami Hiramatsu 提交于 
      Fix to show correct locations for events on modules by relocating given
address instead of retrying after failure.

This happens when the module text size is big enough, bigger than
sh_addr, because the original code retries with given address + sh_addr
if it failed to find CU DIE at the given address.

Any address smaller than sh_addr always fails and it retries with the
correct address, but addresses bigger than sh_addr will get a CU DIE
which is on the given address (not adjusted by sh_addr).

In my environment(x86-64), the sh_addr of ".text" section is 0x10030.
Since i915 is a huge kernel module, we can see this issue as below.

  $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1
  ffffffffc0270000 t i915_switcheroo_can_switch	[i915]

ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check
symbols cross this boundary.

  $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\
  | head -n 2
  ffffffffc027ff80 t haswell_init_clock_gating	[i915]
  ffffffffc0280110 t valleyview_init_clock_gating	[i915]

So setup probes on both function and see what happen.

  $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \
        -a valleyview_init_clock_gating
  Added new events:
    probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
    probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)

  You can now use it in all perf tools, such as:

  	perf record -e probe:valleyview_init_clock_gating -aR sleep 1

  $ sudo ./perf probe -l
    probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
    probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915)

As you can see, haswell_init_clock_gating is correctly shown,
but valleyview_init_clock_gating is not.

With this patch, both events are shown correctly.

  $ sudo ./perf probe -l
    probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
    probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)

Committer notes:

In my case:

  # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
  Added new events:
    probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
    probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)

  You can now use it in all perf tools, such as:

	  perf record -e probe:valleyview_init_clock_gating -aR sleep 1

  # perf probe -l
    probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915)
    probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915)
  #

  # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name'
   [Nr] Name   Type      Address          Off    Size   ES Flg Lk Inf Al
   [ 1] .text  PROGBITS  ffffffff81000000 200000 822fd3 00  AX  0   0 4096
  #

  So both are b0rked, now with the fix:

  # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
  Added new events:
    probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
    probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)

  You can now use it in all perf tools, such as:

	perf record -e probe:valleyview_init_clock_gating -aR sleep 1

  # perf probe -l
    probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
    probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
  #

Both looks correct.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d2d4edbe
    • A
      perf pmu: Factor out scale conversion code · d02fc6bc
      由 Andi Kleen 提交于 
      Move the scale factor parsing code to an own function to reuse it in an
upcoming patch.

v2: Return error in case strdup returns NULL.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170103150833.6694-2-andi@firstfloor.org
[ Keep returning -ENOMEM when strdup() fails in perf_pmu__parse_scale()/convert_scale() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d02fc6bc
  15. 12 1月, 2017 4 次提交
  17. 04 1月, 2017 3 次提交
  19. 03 1月, 2017 1 次提交
    • M
      perf probe: Fix to get correct modname from elf header · 1f2ed153
      由 Masami Hiramatsu 提交于 
      Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.

In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.

This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.

E.g. without this (on x86_64, and target module is arm32):

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup :configfs_lookup+0
                          ^-Here is an empty module name.

With this fix, you can see correct module name:

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup configfs:configfs_lookup+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1f2ed153
  21. 20 12月, 2016 2 次提交
    • K
      perf diff: Do not overwrite valid build id · ed6c166c
      由 Kan Liang 提交于 
      Fixes a perf diff regression issue which was introduced by commit
5baecbcd ("perf symbols: we can now read separate debug-info files
based on a build ID")

The binary name could be same when perf diff different binaries. Build
id is used to distinguish between them.
However, the previous patch assumes the same binary name has same build
id. So it overwrites the build id according to the binary name,
regardless of whether the build id is set or not.

Check the has_build_id in dso__load. If the build id is already set, use
it.

Before the fix:

  $ perf diff 1.perf.data 2.perf.data
  # Event 'cycles'
  #
  # Baseline    Delta  Shared Object     Symbol
  # ........  .......  ................  .............................
  #
    99.83%  -99.80%  tchain_edit       [.] f2
     0.12%  +99.81%  tchain_edit       [.] f3
     0.02%   -0.01%  [ixgbe]           [k] ixgbe_read_reg

  After the fix:
  $ perf diff 1.perf.data 2.perf.data
  # Event 'cycles'
  #
  # Baseline    Delta  Shared Object     Symbol
  # ........  .......  ................  .............................
  #
    99.83%   +0.10%  tchain_edit       [.] f3
     0.12%   -0.08%  tchain_edit       [.] f2
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
CC: Dima Kogan <dima@secretsauce.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 5baecbcd ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ed6c166c
    • R
      perf annotate: Don't throw error for zero length symbols · edee44be
      由 Ravi Bangoria 提交于 
      'perf report --tui' exits with error when it finds a sample of zero
length symbol (i.e. addr == sym->start == sym->end). Actually these are
valid samples. Don't exit TUI and show report with such symbols.
Reported-and-Tested-by: NAnton Blanchard <anton@samba.org>
Link: https://lkml.org/lkml/2016/10/8/189Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      edee44be
  23. 16 12月, 2016 5 次提交
    • R
      perf annotate: Fix jump target outside of function address range · e216874c
      由 Ravi Bangoria 提交于 
      If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).

        34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0

Objdump output:

  0000000000034cf0 <__sigaction>:
  __GI___sigaction():
    34cf0: lea    -0x20(%rdi),%eax
    34cf3: cmp    -bashx1,%eax
    34cf6: jbe    34d00 <__sigaction+0x10>
    34cf8: jmpq   34ac0 <__GI___libc_sigaction>
    34cfd: nopl   (%rax)
    34d00: mov    0x386161(%rip),%rax        # 3bae68 <_DYNAMIC+0x2e8>
    34d07: movl   -bashx16,%fs:(%rax)
    34d0e: mov    -bashxffffffff,%eax
    34d13: retq

perf annotate before applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        v  jmpq   fffffffffffffdd0
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq

perf annotate after applying patch:

  __GI___sigaction  /usr/lib64/libc-2.22.so
           lea    -0x20(%rdi),%eax
           cmp    -bashx1,%eax
        v  jbe    10
        ^  jmpq   34ac0 <__GI___libc_sigaction>
           nop
    10:    mov    _DYNAMIC+0x2e8,%rax
           movl   -bashx16,%fs:(%rax)
           mov    -bashxffffffff,%eax
           retq
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e216874c
    • R
      perf annotate: Support jump instruction with target as second operand · 3ee2eb6d
      由 Ravi Bangoria 提交于 
      Architectures like PowerPC have jump instructions that includes a target
address as a second operand. For example, 'bne cr7,0xc0000000000f6154'.
Add support for such instruction in perf annotate.

objdump o/p:
  c0000000000f6140:   ld     r9,1032(r31)
  c0000000000f6144:   cmpdi  cr7,r9,0
  c0000000000f6148:   bne    cr7,0xc0000000000f6154
  c0000000000f614c:   ld     r9,2312(r30)
  c0000000000f6150:   std    r9,1032(r31)
  c0000000000f6154:   ld     r9,88(r31)

Corresponding perf annotate o/p:

Before patch:
         ld     r9,1032(r31)
         cmpdi  cr7,r9,0
      v  bne    3ffffffffff09f2c
         ld     r9,2312(r30)
         std    r9,1032(r31)
  74:    ld     r9,88(r31)

After patch:
         ld     r9,1032(r31)
         cmpdi  cr7,r9,0
      v  bne    74
         ld     r9,2312(r30)
         std    r9,1032(r31)
  74:    ld     r9,88(r31)
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3ee2eb6d
    • J
      perf evsel: Allow to ignore missing pid · a359c17a
      由 Jiri Olsa 提交于 
      Adding perf_evsel::ignore_missing_cpu_thread bool.

When set true, it allows perf to ignore error of missing pid of perf
event syscall.

We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.

The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.

With this change we will allow this race and ignore such failure with
following warning:

  WARNING: Ignored open failure for pid 8605
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a359c17a
    • J
      perf thread_map: Add thread_map__remove function · 38af91f0
      由 Jiri Olsa 提交于 
      Add thread_map__remove function to remove thread from thread map.

Add automated test also.

Committer notes:

Testing it:

  # perf test "Remove thread map"
  39: Remove thread map                          : Ok
  # perf test -v "Remove thread map"
  39: Remove thread map                          :
  --- start ---
  test child forked, pid 4483
  2 threads: 4482, 4483
  1 thread: 4483
  0 thread:
  test child finished with 0
  ---- end ----
  Remove thread map: Ok
  #
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org
[ Added stdlib.h, to get the free() declaration ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      38af91f0
    • J
      perf evsel: Use variable instead of repeating lengthy FD macro · 83c2e4f3
      由 Jiri Olsa 提交于 
      It's more readable and will ease up following patches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      83c2e4f3