Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 30 6月, 2017 13 次提交
    • E
      sfc: fix attempt to translate invalid filter ID · d58299a4
      由 Edward Cree 提交于 
      When filter insertion fails with no rollback, we were trying to convert
 EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
 vlan->uc or vlan->mc).  This would WARN_ON_ONCE and then record a bogus
 filter ID of 0x1fff, neither of which is a good thing.

Fixes: 0ccb998b ("sfc: fix filter_id misinterpretation in edge case")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d58299a4
    • M
      net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() · e44699d2
      由 Michal Kubeček 提交于 
      Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.

Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.

To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().

Fixes: d7e8883c ("net: make GRO aware of skb->head_frag")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e44699d2
    • D
      bpf: prevent leaking pointer via xadd on unpriviledged · 6bdf6abc
      由 Daniel Borkmann 提交于 
      Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:

  0: (b7) r0 = 0
  1: (18) r2 = 0xffff897e82304400
  3: (7b) *(u64 *)(r1 +48) = r2
  R2 leaks addr into ctx

Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:

  0: (b7) r0 = 0
  1: (7b) *(u64 *)(r1 +48) = r0
  2: (18) r2 = 0xffff897e82304400 ; map
  4: (db) lock *(u64 *)(r1 +48) += r2
  5: (95) exit

We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:

   0: (bf) r6 = r1
   1: (7a) *(u64 *)(r10 -8) = 0
   2: (bf) r2 = r10
   3: (07) r2 += -8
   4: (18) r1 = 0x0
   6: (85) call bpf_map_lookup_elem#1
   7: (15) if r0 == 0x0 goto pc+3
   R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
   8: (b7) r3 = 0
   9: (7b) *(u64 *)(r0 +0) = r3
  10: (db) lock *(u64 *)(r0 +0) += r6
  11: (b7) r0 = 0
  12: (95) exit

  from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
  11: (b7) r0 = 0
  12: (95) exit

Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.

Fixes: 1be7f75d ("bpf: enable non-root eBPF programs")
Fixes: 17a52670 ("bpf: verifier (add verifier core)")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6bdf6abc
    • D
      Merge branch 'arcnet-fixes' · 00778f7c
      由 David S. Miller 提交于 
      Michael Grzeschik says:

====================
arcnet: Collection of latest fixes

Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      00778f7c
    • M
      arcnet: com20020-pci: add missing pdev setup in netdev structure · 2a0ea04c
      由 Michael Grzeschik 提交于 
      We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2a0ea04c
    • M
      arcnet: com20020-pci: fix dev_id calculation · cb108619
      由 Michael Grzeschik 提交于 
      The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb108619
    • M
      arcnet: com20020: remove needless base_addr assignment · 0d494fcf
      由 Michael Grzeschik 提交于 
      The assignment is superfluous.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0d494fcf
    • C
      Trivial fix to spelling mistake in arc_printk message · 06908d7a
      由 Colin Ian King 提交于 
      Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      06908d7a
    • M
      arcnet: change irq handler to lock irqsave · 5b858403
      由 Michael Grzeschik 提交于 
      This patch prevents the arcnet driver from the following deadlock.

[   41.273910] ======================================================
[   41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[   41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[   41.292366] ------------------------------------------------------
[   41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[   41.305628]  (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.315199]
[   41.315199] and this task is already holding:
[   41.321324]  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.329593] which would create a new lock dependency:
[   41.334893]  (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[   41.341801]
[   41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[   41.350108]  (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[   41.357539]   [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.362677]   [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.367723]   [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.372759]   [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.378340]   [<c0036b30>] __do_softirq+0x144/0x298
[   41.383469]   [<c0036fb4>] irq_exit+0xcc/0x130
[   41.388138]   [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.393728]   [<c0014578>] __irq_svc+0x58/0x78
[   41.398402]   [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.403443]   [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.409029]   [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.414170]
[   41.414170] to a SOFTIRQ-irq-unsafe lock:
[   41.419931]  (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[   41.427996] ...  [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.433409]   [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.439646]   [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.445063]   [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.450661]   [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.455700]   [<c0087548>] irq_thread+0x13c/0x1dc
[   41.460649]   [<c0050f10>] kthread+0xe4/0xf8
[   41.465158]   [<c000f810>] ret_from_fork+0x14/0x24
[   41.470207]
[   41.470207] other info that might help us debug this:
[   41.470207]
[   41.478627]  Possible interrupt unsafe locking scenario:
[   41.478627]
[   41.485763]        CPU0                    CPU1
[   41.490521]        ----                    ----
[   41.495279]   lock(&(&lp->lock)->rlock);
[   41.499414]                                local_irq_disable();
[   41.505636]                                lock(_xmit_ARCNET#2);
[   41.511967]                                lock(&(&lp->lock)->rlock);
[   41.518741]   <Interrupt>
[   41.521490]     lock(_xmit_ARCNET#2);
[   41.525356]
[   41.525356]  *** DEADLOCK ***
[   41.525356]
[   41.531587] 1 lock held by arcecho/233:
[   41.535617]  #0:  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[   41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[   41.557357]    HARDIRQ-ON-W at:
[   41.560664]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.567445]                     [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.574866]                     [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.581646]                     [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.588613]                     [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.596120]                     [<c0630658>] linkwatch_event+0x2c/0x34
[   41.602991]                     [<c004af30>] process_one_work+0x188/0x40c
[   41.610131]                     [<c004b200>] worker_thread+0x4c/0x480
[   41.616912]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.623048]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.629735]    IN-SOFTIRQ-W at:
[   41.633039]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.639820]                     [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.646508]                     [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.653190]                     [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.660425]                     [<c0036b30>] __do_softirq+0x144/0x298
[   41.667201]                     [<c0036fb4>] irq_exit+0xcc/0x130
[   41.673518]                     [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.680754]                     [<c0014578>] __irq_svc+0x58/0x78
[   41.687077]                     [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.693769]                     [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.701006]                     [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.707791]    INITIAL USE at:
[   41.711003]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.717696]                    [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.725026]                    [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.731718]                    [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.738593]                    [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.746011]                    [<c0630658>] linkwatch_event+0x2c/0x34
[   41.752789]                    [<c004af30>] process_one_work+0x188/0x40c
[   41.759847]                    [<c004b200>] worker_thread+0x4c/0x480
[   41.766541]                    [<c0050f10>] kthread+0xe4/0xf8
[   41.772596]                    [<c000f810>] ret_from_fork+0x14/0x24
[   41.779198]  }
[   41.780945]  ... key      at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[   41.788192]  ... acquired at:
[   41.791309]    [<c007bed8>] lock_acquire+0x70/0x90
[   41.796361]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   41.802324]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.808844]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   41.814622]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   41.820034]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   41.825091]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   41.829956]    [<c05ffda8>] SyS_send+0x18/0x20
[   41.834638]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   41.839954]
[   41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[   41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[   41.855644]    HARDIRQ-ON-W at:
[   41.858945]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.865726]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.873607]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.880666]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.887901]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.894593]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.901195]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.907338]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.914025]    SOFTIRQ-ON-W at:
[   41.917328]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.924106]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.931981]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.939028]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.946264]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.952954]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.959548]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.965689]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.972379]    INITIAL USE at:
[   41.975595]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.982283]                    [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.990063]                    [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.997027]                    [<c03c1170>] regmap_irq_thread+0x190/0x314
[   42.004172]                    [<c0087244>] irq_thread_fn+0x1c/0x34
[   42.010766]                    [<c0087548>] irq_thread+0x13c/0x1dc
[   42.017267]                    [<c0050f10>] kthread+0xe4/0xf8
[   42.023314]                    [<c000f810>] ret_from_fork+0x14/0x24
[   42.029903]  }
[   42.031648]  ... key      at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[   42.039255]  ... acquired at:
[   42.042372]    [<c007bed8>] lock_acquire+0x70/0x90
[   42.047413]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   42.053364]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   42.059872]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   42.065634]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   42.071030]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   42.076069]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   42.080926]    [<c05ffda8>] SyS_send+0x18/0x20
[   42.085601]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   42.090918]
[   42.092481]
[   42.092481] stack backtrace:
[   42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[   42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[   42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14)
[   42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c)
[   42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c)
[   42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0)
[   42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[   42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90)
[   42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[   42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[   42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[   42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[   42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24)
[   42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0)
[   42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20)
[   42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>

   ---
   v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5b858403
    • D
      rocker: move dereference before free · acb4b7df
      由 Dan Carpenter 提交于 
      My static checker complains that ofdpa_neigh_del() can sometimes free
"found".   It just makes sense to use it first before deleting it.

Fixes: ecf244f7 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      acb4b7df
    • I
      mlxsw: spectrum_router: Fix NULL pointer dereference · 6b27c8ad
      由 Ido Schimmel 提交于 
      In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.

If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.

To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NPetr Machata <petrm@mellanox.com>
Tested-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6b27c8ad
    • G
      net: sched: Fix one possible panic when no destroy callback · c1a4872e
      由 Gao Feng 提交于 
      When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.

Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.

Now add one the check for destroy to avoid the possible panic.

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c1a4872e
    • J
      virtio-net: serialize tx routine during reset · 713a98d9
      由 Jason Wang 提交于 
      We don't hold any tx lock when trying to disable TX during reset, this
would lead a use after free since ndo_start_xmit() tries to access
the virtqueue which has already been freed. Fix this by using
netif_tx_disable() before freeing the vqs, this could make sure no tx
after vq freeing.
Reported-by: NJean-Philippe Menil <jpmenil@gmail.com>
Tested-by: NJean-Philippe Menil <jpmenil@gmail.com>
Fixes commit f600b690 ("virtio_net: Add XDP support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NRobert McCabe <robert.mccabe@rockwellcollins.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      713a98d9
  3. 28 6月, 2017 3 次提交
  5. 26 6月, 2017 1 次提交
  7. 25 6月, 2017 2 次提交
  9. 24 6月, 2017 7 次提交
    • D
      Merge branch 'bnxt_en-fixes' · 92cc8a51
      由 David S. Miller 提交于 
      Michael Chan says:

====================
bnxt_en: Error handling and netpoll fixes.

Add missing error handling and fix netpoll handling.  The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode.  The fix is to only handle
TX events in netpoll mode.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      92cc8a51
    • M
      bnxt_en: Fix netpoll handling. · 2270bc5d
      由 Michael Chan 提交于 
      To handle netpoll properly, the driver must only handle TX packets
during NAPI.  Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.

The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings.  In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.

Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.
Reported-by: NCalvin Owens <calvinowens@fb.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2270bc5d
    • M
      bnxt_en: Add missing logic to handle TPA end error conditions. · 69c149e2
      由 Michael Chan 提交于 
      When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors.  The current code is
not checking for the error condition.  Define the proper error bits and
the macro to check for this error and abort properly.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      69c149e2
    • R
      net: dp83640: Avoid NULL pointer dereference. · db9d8b29
      由 Richard Cochran 提交于 
      The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8c ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.

Even though the kernel-doc was subsequently updated in commit
7a76a021 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics.  Probably
Manfred derived that patch from an older kernel version.

This fix should be applied to the stable trees as well.

Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      db9d8b29
    • D
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 43b786c6
      由 David S. Miller 提交于 
      Steffen Klassert says:

====================
pull request (net): ipsec 2017-06-23

1) Fix xfrm garbage collecting when unregistering a netdevice.
   From Hangbin Liu.

2) Fix NULL pointer derefernce when exiting a network namespace.
   From Hangbin Liu.

3) Fix some error codes in pfkey to prevent a NULL pointer derefernce.
   From Dan Carpenter.

4) Fix NULL pointer derefernce on allocation failure in pfkey.
   From Dan Carpenter.

5) Adjust IPv6 payload_len to include extension headers. Otherwise
   we corrupt the packets when doing ESP GRO on transport mode.
   From Yossi Kuperman.

6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO.
   From Yossi Kuperman.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      43b786c6
    • W
      sit: use __GFP_NOWARN for user controlled allocation · 0ccc22f4
      由 WANG Cong 提交于 
      The memory allocation size is controlled by user-space,
if it is too large just fail silently and return NULL,
not to mention there is a fallback allocation later.
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0ccc22f4
    • M
      net: account for current skb length when deciding about UFO · a5cb659b
      由 Michal Kubeček 提交于 
      Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:

  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 3000, 0, ...);

Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():

  ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))

At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.

When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.

In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.

Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13a ("ipv6: Should use consistent conditional judgement for
	ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a5cb659b
  11. 23 6月, 2017 3 次提交
  13. 22 6月, 2017 11 次提交