The kernel log can get filled with debug messages from send_cmd_ioarrin()
when dynamic debug is enabled for the cxlflash module and there is a lot of
legacy I/O traffic.

While these messages are necessary to debug issues that involve command
tracking, the abundance of data can overwrite other useful data in the
log. The best option available is to limit the messages that should serve
most of the common use cases.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The following Oops may be encountered if the device is reset, i.e. EEH
recovery, while there is heavy I/O traffic:

59:mon> t
[c000200db64bb680] c008000009264c40 cxlflash_queuecommand+0x3b8/0x500
					[cxlflash]
[c000200db64bb770] c00000000090d3b0 scsi_dispatch_cmd+0x130/0x2f0
[c000200db64bb7f0] c00000000090fdd8 scsi_request_fn+0x3c8/0x8d0
[c000200db64bb900] c00000000067f528 __blk_run_queue+0x68/0xb0
[c000200db64bb930] c00000000067ab80 __elv_add_request+0x140/0x3c0
[c000200db64bb9b0] c00000000068daac blk_execute_rq_nowait+0xec/0x1a0
[c000200db64bba00] c00000000068dbb0 blk_execute_rq+0x50/0xe0
[c000200db64bba50] c0000000006b2040 sg_io+0x1f0/0x520
[c000200db64bbaf0] c0000000006b2e94 scsi_cmd_ioctl+0x534/0x610
[c000200db64bbc20] c000000000926208 sd_ioctl+0x118/0x280
[c000200db64bbcc0] c00000000069f7ac blkdev_ioctl+0x7fc/0xe30
[c000200db64bbd20] c000000000439204 block_ioctl+0x84/0xa0
[c000200db64bbd40] c0000000003f8514 do_vfs_ioctl+0xd4/0xa00
[c000200db64bbde0] c0000000003f8f04 SyS_ioctl+0xc4/0x130
[c000200db64bbe30] c00000000000b184 system_call+0x58/0x6c

When there is no room to send the I/O request, the cached room is refreshed
by reading the memory mapped command room value from the AFU. The AFU
register mapping is refreshed during a reset, creating a race condition that
can lead to the Oops above.

During a device reset, the AFU should not be unmapped until all the active
send threads quiesce. An atomic counter, cmds_active, is currently used to
track internal AFU commands and quiesce during reset. This same counter can
also be used for the active send threads.
Signed-off-by: NUma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently we don't check that device is not gone before dereferencing
its elements in the function hisi_sas_task_exec() (specifically, the DQ
pointer).

This patch fixes this issue by filling in the DQ pointer in
hisi_sas_task_prep() after we check that the device pointer is still
safe to reference.

[mkp: typo]
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The IPTT of a slot is unique, and we currently use hisi_hba lock to
protect it.

Now slot is managed on hisi_sas_device.list, so use DQ lock to protect
for allocating and freeing the slot.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently we lock the DQ to protect whole delivery process.  So this
stops us building slots for the same queue in parallel, and can affect
performance.

To optimise it, only lock the DQ during special periods, specifically
when allocating a slot from the DQ and when delivering a slot to the HW.

This approach is now safe, thanks to the previous patches to ensure that
we always deliver a slot to the HW once allocated.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently we allocate the slot's memory buffer after allocating the DQ
slot.

To aid DQ lockout reduction, and allow slots to be built in parallel,
move this step (which can fail) prior to allocating the slot.

Also a stray spin_unlock_irqrestore() is removed from internal task exec
function.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the task prep functions now should not fail, adjust the return
types to void.

In addition, some checks in the task prep functions are relocated to the
main module; this is specifically the check for the number of elements
in an sg list exceeded the HW SGE limit.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently we use DQ lock to protect delivery of DQ entry one by one.

To optimise to allow more than one slot to be built for a single DQ in
parallel, we need to remove the DQ lock when preparing slots, prior to
delivery.

To achieve this, we rearrange the slot build order to ensure that once
we allocate a slot for a task, we do cannot fail to deliver the task.

In this patch, we rearrange the slot building for SMP tasks to ensure
that sg mapping part (which can fail) happens before we allocate the
slot in the DQ.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This makes ufshcd_config_pwr_mode non-static so that other vendors like
exynos can use it.
Signed-off-by: NSeungwon Jeon <essuuj@gmail.com>
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some host controllers don't support host controller enable via HCE.
Signed-off-by: NSeungwon Jeon <essuuj@gmail.com>
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Some host controllers support interrupt aggregation but don't allow
resetting counter and timer in software.
Signed-off-by: NSeungwon Jeon <essuuj@gmail.com>
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In the right behavior, setting the bit to '0' indicates clear and '1'
indicates no change. If host controller handles this the other way,
UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used.

[mkp: typo]
Signed-off-by: NSeungwon Jeon <essuuj@gmail.com>
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: N"Asutosh Das (asd)" <asutoshd@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On the quest to remove all VLAs from the kernel[1] this moves buffers
off the stack. In the second instance, this collapses two separately
allocated buffers into a single buffer, since they are used
consecutively, which saves 256 bytes (QUERY_DESC_MAX_SIZE + 1) of stack
space.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds new adapter error log for P9 system with the new AZ SAS
cable.
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in esas2r_debug message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are two advantages:

* Direct I/O allows to avoid the write-back cache, so it reduces affects
  to other processes in the system.
* Async I/O allows to handle a few commands concurrently.

DIO + AIO shows a better perfomance for random write operations:

Mode: O_DSYNC Async: 1
$ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sda --runtime=20 --numjobs=2
  WRITE: bw=45.9MiB/s (48.1MB/s), 21.9MiB/s-23.0MiB/s (22.0MB/s-25.2MB/s), io=919MiB (963MB), run=20002-20020msec

Mode: O_DSYNC Async: 0
$ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sdb --runtime=20 --numjobs=2
  WRITE: bw=1607KiB/s (1645kB/s), 802KiB/s-805KiB/s (821kB/s-824kB/s), io=31.8MiB (33.4MB), run=20280-20295msec

Known issue:

DIF (PI) emulation doesn't work when a target uses async I/O, because
DIF metadata is saved in a separate file, and it is another non-trivial
task how to synchronize writing in two files, so that a following read
operation always returns a consisten metadata for a specified block.

Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: NAndrei Vagin <avagin@openvz.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On the quest to remove all VLAs from the kernel[1] this rearranges the
code to avoid a VLA warning under -Wvla (gcc doesn't recognize "const"
variables as not triggering VLA creation). Additionally cleans up
variable naming to avoid 80 character column limit.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NBoaz Harrosh <ooo@electrozaur.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
emulate_write_cache in configFS.

Removed tcmu_netlink_event() since we have new netlink
events helpers now.
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_size in configFS.
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_config in configFS.
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add new netlink events helpers tcmu_netlink_event_init() and
tcmu_netlink_event_send(). These new functions intend to replace
existing netlink events helper function tcmu_netlink_event().

The existing function tcmu_netlink_event() works well for events like
TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink
attribute. But if there is a command requires more than one attributes
to send out, we have to use a struct to adapt the paremeter
reconfig_data, it is hard to use one struct or a union in one struct to
adapt every command with different attributes, it may get long and ugly.

With the new two functions, we can call tcmu_netlink_event_init() to
initialize a netlink event, then add all attributes we need by using
nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So
that we don't need to use a long struct or union if we want to send
mulitple attributes for different commands.

[mkp: typos]
Signed-off-by: NZhu Lingshan <lszhu@suse.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In tw_chrdev_ioctl(), the length of the data buffer is firstly copied
from the userspace pointer 'argp' and saved to the kernel object
'data_buffer_length'. Then a security check is performed on it to make
sure that the length is not more than 'TW_MAX_IOCTL_SECTORS *
512'. Otherwise, an error code -EINVAL is returned. If the security
check is passed, the entire ioctl command is copied again from the
'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various
operations are performed on 'tw_ioctl' according to the 'cmd'. Given
that the 'argp' pointer resides in userspace, a malicious userspace
process can race to change the buffer length between the two
copies. This way, the user can bypass the security check and inject
invalid data buffer length. This can cause potential security issues in
the following execution.

This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to
avoid the above issues.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Acked-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from
the userspace pointer 'argp' and saved to the kernel object
'driver_command'.  Then a security check is performed on the data buffer
size indicated by 'driver_command', which is
'driver_command.buffer_length'. If the security check is passed, the
entire ioctl command is copied again from the 'argp' pointer and saved
to the kernel object 'tw_ioctl'. Then, various operations are performed
on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer
resides in userspace, a malicious userspace process can race to change
the buffer size between the two copies. This way, the user can bypass
the security check and inject invalid data buffer size. This can cause
potential security issues in the following execution.

This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o
avoid the above issues.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Acked-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

MPT2_MAGIC_NUMBER as well as drivers/scsi/mpt2sas/mpt2sas_ctl.h were
removed to reuse mpt3sas code since commit 09ec55ed ("mpt2sas: Remove
.c and .h files from mpt2sas driver").
Signed-off-by: NTomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt2sas/ no longer exists after commit
c84b06a4 ("mpt3sas: Single driver module which supports both SAS 2.0 &
SAS 3.0 HBAs") merged/removed it.
Signed-off-by: NTomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If we had more than 32 megaraid cards then it would cause memory
corruption.  That's not likely, of course, but it's handy to enforce it
and make the static checker happy.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in warning message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistakes in lpfc_printf_log log message

"mabilbox" -> "mailbox"
"maibox" -> "mailbox"
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NAndrei Vagin <avagin@openvz.org>
Reviewed-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Trivial fix to spelling mistake in text string.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is an SoC bug of v3 hw development version. When hot- unplugging a
directly attached disk, the PHY down interrupt may not happen. It is
very easy to appear on some boards.

When this issue occurs, the controller will receive many invalid dword
frames, and the "alos" fields of register HILINK_ERR_DFX can indicate
that disk was unplugged.

As an workaround solution, this patch detects this issue in the channel
interrupt, and workaround it by following steps:

 - Disable the PHY
 - Clear error code and interrupt
 - Enable the PHY

Then the HW will reissue PHY down interrupt.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It is common to use readl poll timeout helpers in the driver, so create
custom wrappers.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Event95 is used for DFX purpose. The relevant bit for this interrupt in
the ENT_INT_SRC_MSK3 register has been disabled, so remove the
processing.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As a unconstrained command, a command can be sent to SATA disk even if
SATA disk status is BUSY, ERR or DRQ.

If an ATA reset assert is successful but ATA reset de-assert fails, then
it will retry the reset de-assert. If reset de- assert retry is
successful, we think it is okay to probe the device but actually it
still has Err status.

Apparently we need to retry the ATA reset assertion and de- assertion
instead for this mentioned scenario.

As such, we config ATA reset assert as a constrained command, if ATA
reset de-assert fails, then ATA reset de-assert retry will also
fail. Then we will retry the proper process of ATA reset assert and
de-assert again.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After the controller is reset, we currently may not honour the PHY max
linkrate set via sysfs, in that after a reset we always revert to max
linkrate of 12Gbps, ignoring the value set via sysfs.

This patch modifies to policy to set the programmed PHY linkrate,
honouring the max linkrate programmed via sysfs.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We should only have the timer enabled after PHY up after controller
reset, so disable prior to reset.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It is possible to dereference a NULL-pointer in hisi_sas_abort_task() in
special scenario when the device has been removed.

If an SMP task times-out, it will call hisi_sas_abort_task() to
recover. And currently there is a check in hisi_sas_abort_task() to
avoid the situation of processing the abort for the removed device.

However we have an ordering problem, in that we may reference a task for
the removed device before checking if the device has been removed.

Fix this by only referencing the sas_dev after we know it is still
present.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>