Cosmetic cleanup's: mostly spelling fixes etc.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Can use kzalloc to save a little code.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The sky2 driver has a lot of register definitions, that were
copied over from the skge driver, for areas that don't exist
on the Yukon2.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

also:
- eliminate use of pointless get_nvpriv() wrapper,
  and use netdev_priv() directly.
- use NETDEV_TX_xxx return codes

Improve sb1250-mac driver to probe for PHYs at addresses other
than 1, such as the PHYs on BigSur.
Signed-Off-By: NAndy Isaacson <adi@broadcom.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Driver version, white space, comments, device id & other

Originally posted on 8/31 (and perhaps before)...I think it has not
been committed because the patch from that posting was damaged.  I'm
reposting to make sure it gets in... :-)
Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Include MII address 0 at the end of the PHY scan.  This covers the
entire range of possible MII addresses.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this
driver.  Fix.
Acked-by: NDavid Gibson <hermes@gibson.dropbear.id.au>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++------------------------
 1 files changed, 515 insertions(+), 515 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |  303 ++++++++++++++++++++---------------------------
 1 files changed, 132 insertions(+), 171 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

mkiss.h has been integrated into mkiss.c earlier.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>

 drivers/net/hamradio/mkiss.h |   62 -------------------------------------------
 1 files changed, 62 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Expand the mask used when reseting the chip to include the GlobalReset
bit.  This fix comes from ICPlus and seems to be required for some
cards.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Checking the skb->len value before calling skb_padto is redundant.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This is a (final?) hack to support the odd DMA allocation requirements
of the b44 hardware.  The b44 hardware has a 30-bit DMA mask.  On x86,
anything less than a 32-bit DMA mask forces allocations into the 16MB
GFP_DMA range.  The memory there is somewhat limited, often resulting
in an inability to initialize the b44 driver.

This hack uses streaming DMA allocation APIs in order to provide an
alternative in case the GFP_DMA allocation fails.  It is somewhat ugly,
but not much worse than the similar existing hacks to support SKB
allocations in the same driver.  FWIW, I have received positive
feedback on this from several Fedora users.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Expand comment explaining MAC address selection for replicated IGMP
frames transmitted in bonding mode 1 (active-backup).  Also, a small
whitespace cleanup.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix
problems resuming from suspend-to-RAM.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

work_done is overwritten each time through the rx_action loop in
epic_poll.  This screws-up the NAPI accounting if the loop is executed
more than once.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Get rid of the mdelay call in rhine_disable_linkmon.  The function
is called from the via-rhine versions of mdio_read and mdio_write.
Those functions are indirectly called from rhine_check_media and
rhine_tx_timeout, both of which can be called in interrupt context.

So, create tx_timeout_task and check_media_task as instances of struct
work_struct inside of rhine_private.  Then, change rhine_tx_timeout to
invoke schedule_work for tx_timeout_task (i.e. rhine_tx_timeout_task),
moving the work to process context.  Also, change rhine_error (invoked
from rhine_interrupt) to invoke schedule_work for check_media_task
(i.e. rhine_check_media_task), which simply calls rhine_check media
in process context.  Finally, add a call to flush_scheduled_work in
rhine_close to avoid any resource conflicts with pending work items.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

drivers/net/e1000/e1000_main.c: In function `e1000_intr':
drivers/net/e1000/e1000_main.c:3156: error: `i' undeclared (first use in this function)
drivers/net/e1000/e1000_main.c:3156: error: (Each undeclared identifier is reported only once
drivers/net/e1000/e1000_main.c:3156: error: for each function it appears in.)

This function is foul.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Support for Toshiba's RBHMA4500 eval board for the TX4938.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/ne.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Use physical addresses at the interface level, letting drivers remap
them as appropriate.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |   26 ++++++++++----------------
 1 files changed, 10 insertions(+), 16 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

These should really be addresses obtained with ioremap() or some
bus-specific backend, but for now...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sgiseeq.c       |   28 ++++++++++++++--------------
 include/asm-mips/sgi/hpc3.h |   40 ++++++++++++++++++++--------------------
 2 files changed, 34 insertions(+), 34 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sgiseeq.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/tulip/de2104x.c |    5 +++++
 1 files changed, 5 insertions(+)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

 o Add support for DP83847 MII.
 o remove unused variable.
 o Add some initialisations so even an unknown MII won't result in a crash.
 o Correct error message to "no known MIIs found".
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/au1000_eth.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

If .owner isn't set the module can be unloaded even while still active.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that
uses CRC16 checksums to secure data transfers between the modem and host.
It's also used to communicate over a pty to applications such as Wampes.

Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest
mkiss 2.6 mkiss driver by me.
Signed-off-by: NThomas Osterried DL9SAU <thomas@x-berg.in-berlin.de>
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

From Suzanne Wood <suzannew@cs.pdx.edu>:

Clarify RCU implementation in bpqether.c.

Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls
list_del_rcu(), substitute list_for_each_entry_rcu() for
list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start().

Add rcu dereference protection in bpq_seq_next().

The rcu_read_lock()/unlock() in bpq_device_event() are removed because
netdev event handlers are called with RTNL locking in place.

FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires
synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which
cannot block.  Herbert Xu notes that synchronization is done here by
unregister_netdevice().  This calls synchronize_net() which in turn uses
synchronize_rcu().
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch fixes the following bugs with offline diagnostics
code(run with "ethtool -t").

1. After running offline diagnostics, adapter would report
corrupted packets on receive. This was because of adapter not
being brought out of "RLDRAM test mode".
2. Current EEPROM test works only for Xframe I. Since Xframe II
uses different interface(SPI), support for this interface has
been added. Also, since SPI supports write access to all areas
of EEPROM, negative testing is done only for Xframe I.
3. Return values from subfunctions of offline diagnostics have
been corrected.
4. In register test, expected value from rx_queue_cfg register
is made to depend on adapter type.
5. After the test, need to restore values at EEPROM offsets
0x4F0 and 0x7F0. These locations were modified as part of test.
6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl
register. Also, couple of unnecessary writes to mc_rldram_test_ctrl
have been removed.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The aironet PCI driver has a build dependency on ISA that prevent the
driver to compile on systems that doesn't support ISA, like x86_64.  The
driver really doesn't depend on ISA, it does some ISA stuff in the
initialization code, since the driver supports both ISA and PCI cards.  So
the driver should depend on ISA_DMA_API to build on all systems, and this
will not hurt PCI at all.
Signed-off-by: NMatteo Croce <3297627799@wind.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>