If CONFIG_IRQ_OF=n:

drivers/built-in.o: In function `of_device_alloc':
(.text+0x72bce): undefined reference to `of_irq_to_resource_table'
make: *** [vmlinux] Error 1

of_device_alloc() calls of_irq_to_resource_table() with nr_irqs = 0 due
to of_irq_count() already being a dummy, so just add a dummy for
of_irq_to_resource_table(), too.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NRob Herring <robh@kernel.org>

The commit 9ec36caf
"of/irq: do irq resolution in platform_get_irq" from Rob Herring -
moves resolving of the interrupt resources in platform_get_irq().
But this solution isn't complete because platform_get_irq_byname()
need to be modified the same way.

Hence, fix it by adding interrupt resolution code at the
platform_get_irq_byname() function too.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Currently we get the following kind of errors if we try to use interrupt
phandles to irqchips that have not yet initialized:

irq: no irq domain found for /ocp/pinmux@48002030 !
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012
(show_stack+0x14/0x1c)
(dump_stack+0x6c/0xa0)
(warn_slowpath_common+0x64/0x84)
(warn_slowpath_null+0x1c/0x24)
(of_device_alloc+0x144/0x184)
(of_platform_device_create_pdata+0x44/0x9c)
(of_platform_bus_create+0xd0/0x170)
(of_platform_bus_create+0x12c/0x170)
(of_platform_populate+0x60/0x98)

This is because we're wrongly trying to populate resources that are not
yet available. It's perfectly valid to create irqchips dynamically, so
let's fix up the issue by resolving the interrupt resources when
platform_get_irq is called.

And then we also need to accept the fact that some irqdomains do not
exist that early on, and only get initialized later on. So we can
make the current WARN_ON into just into a pr_debug().

We still attempt to populate irq resources when we create the devices.
This allows current drivers which don't use platform_get_irq to continue
to function. Once all drivers are fixed, this code can be removed.
Suggested-by: NRussell King <linux@arm.linux.org.uk>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Add an empty version of of_irq_count for !OF_IRQ. This fixes build error
on sparc in linux-next:

drivers/gpio/gpio-bcm-kona.c:542: undefined reference to `of_irq_count'
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

All the users of of_irq_parse_raw pass in a raw interrupt specifier from
the device tree and expect it to be returned (possibly modified) in an
of_phandle_args structure. However, the primary function of
of_irq_parse_raw() is to check for translations due to the presence of
one or more interrupt-map properties. The actual placing of the data
into an of_phandle_args structure is trivial. If it is refactored to
accept an of_phandle_args structure directly, then it becomes possible
to consume of_phandle_args from other sources. This is important for an
upcoming patch that allows a device to be connected to more than one
interrupt parent. It also simplifies the code a bit.

The biggest complication with this patch is that the old version works
on the interrupt specifiers in __be32 form, but the of_phandle_args
structure is intended to carry it in the cpu-native version. A bit of
churn was required to make this work. In the end it results in tighter
code, so the churn is worth it.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

All the callers of irq_create_of_mapping() pass the contents of a struct
of_phandle_args structure to the function. Since all the callers already
have an of_phandle_args pointer, why not pass it directly to
irq_create_of_mapping()?
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

struct of_irq and struct of_phandle_args are exactly the same structure.
This patch makes the kernel use of_phandle_args everywhere. This in
itself isn't a big deal, but it makes some follow-on patches simpler.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The OF irq handling code has been overloading the term 'map' to refer to
both parsing the data in the device tree and mapping it to the internal
linux irq system. This is probably because the device tree does have the
concept of an 'interrupt-map' function for translating interrupt
references from one node to another, but 'map' is still confusing when
the primary purpose of some of the functions are to parse the DT data.

This patch renames all the of_irq_map_* functions to of_irq_parse_*
which makes it clear that there is a difference between the parsing
phase and the mapping phase. Kernel code can make use of just the
parsing or just the mapping support as needed by the subsystem.

The patch was generated mechanically with a handful of sed commands.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Much of of_irq.h is needlessly ifdef'ed. Clean this up and minimize the
amount ifdef'ed code. This fixes some  build warnings when CONFIG_OF
is not enabled (seen on i386 and x86_64):

include/linux/of_irq.h:82:7: warning: 'struct device_node' declared inside parameter list [enabled by default]
include/linux/of_irq.h:82:7: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
include/linux/of_irq.h:87:47: warning: 'struct device_node' declared inside parameter list [enabled by default]

Compile tested on i386, sparc and arm.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

drivers/of/irq.c:195:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:196:51: warning: restricted __be32 degrades to integer
drivers/of/irq.c:199:57: warning: restricted __be32 degrades to integer
drivers/of/irq.c:201:58: warning: restricted __be32 degrades to integer
drivers/of/irq.c:470:37: warning: incorrect type in assignment (different modifiers)
drivers/of/irq.c:470:37:    expected int ( *[usertype] irq_init_cb )( ... )
drivers/of/irq.c:470:37:    got void const *const data
drivers/of/irq.c:96:5: error: symbol 'of_irq_map_raw' redeclared with different type (originally declared at include/linux/of_irq.h:61) - incompatible argument 2 (different base types)

drivers/of/of_pci_irq.c:91:40: warning: incorrect type in argument 2 (different base types)
drivers/of/of_pci_irq.c:91:40:    expected unsigned int const [usertype] *intspec
drivers/of/of_pci_irq.c:91:40:    got restricted __be32 *<noident>
drivers/of/of_pci_irq.c:91:53: warning: incorrect type in argument 4 (different base types)
drivers/of/of_pci_irq.c:91:53:    expected unsigned int const [usertype] *addr
drivers/of/of_pci_irq.c:91:53:    got restricted __be32 *<noident>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

of_irq_find_parent is a handy function to use outside the confines of
the Open Firmware subsystem. One such use-case is when the IRQ Domain
wishes to find an IRQ domain for a given device node. Currently it can
not take any notice of the 'interrupt-parent' property. Instead it
just uses the first IRQ controller as it climbs the Device Tree. If
we were to use this as a precursor the resultant controller is more
likely to be correct.
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add a empty irq_of_parse_and_map() function that returns 0 for non-dt
builds and avoid having #ifdef CONFIG_OF around all calls to
irq_of_parse_and_map(). In addition to that, the irq_of_parse_and_map()
function declaration is made available only if CONFIG_OF_IRQ is defined,
which is the same config option that makes the irq_of_parse_and_map()
function definition available. While at it, fix a typo as well.

Changes since v1:
- Moved irq_of_parse_and_map() function declaration under CONFIG_OF_IRQ.
- Fix a minor typo in comments.
Suggested-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>
[grant.likely: fix bug causing SPARC to break]
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Several architectures define their own empty irq_dispose_mapping().  Since
the irq_domain code is centralized now, there is little need to do so.  This
patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is
selected.

The patch also means that IRQ_DOMAIN becomes selectable on all architectures.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: sparclinux@vger.kernel.org
Cc: linux@lists.openrisc.net

of_irq_init will scan the devicetree for matching interrupt controller
nodes. Then it calls an initialization function for each found controller
in the proper order with parent nodes initialized before child nodes.

Based on initial pseudo code from Grant Likely.

Changes in v4:
- Drop unnecessary empty list check
- Be more verbose on errors
- Simplify "if (!desc) WARN_ON(1)" to "if (WARN_ON(!desc))"

Changes in v3:
- add missing kfree's found by Jamie
- Implement Grant's comments to simplify the init loop
- fix function comments

Changes in v2:
- Complete re-write of list searching code from Grant Likely
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

This patch adds irq_domain infrastructure for translating from
hardware irq numbers to linux irqs.  This is particularly important
for architectures adding device tree support because the current
implementation (excluding PowerPC and SPARC) cannot handle
translation for more than a single interrupt controller.  irq_domain
supports device tree translation for any number of interrupt
controllers.

This patch converts x86, Microblaze, ARM and MIPS to use irq_domain
for device tree irq translation.  x86 is untested beyond compiling it,
irq_domain is enabled for MIPS and Microblaze, but the old behaviour is
preserved until the core code is modified to actually register an
irq_domain yet.  On ARM it works and is required for much of the new
ARM device tree board support.

PowerPC has /not/ been converted to use this new infrastructure.  It
is still missing some features before it can replace the virq
infrastructure already in powerpc (see documentation on
irq_domain_map/unmap for details).  Followup patches will add the
missing pieces and migrate PowerPC to use irq_domain.

SPARC has its own method of managing interrupts from the device tree
and is unaffected by this change.
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

We have platform code that needs to find a node's interrupt parent, so
export of_irq_find_parent() so we can use it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

It works on current architectures simply because asm/prom.h includes
it, but it broke when x86 turned on CONFIG_OF.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Instead of referencing NO_IRQ in platform.c, define some helper functions
in irq.c to call instead from platform.c.  Keep NO_IRQ usage local to
irq.c, and define NO_IRQ if not defined in headers.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Merge common irq mapping code between PowerPC and Microblaze.

This patch merges of_irq_find_parent(), of_irq_map_raw() and
of_irq_map_one().  The functions are dependent on one another, so all
three are merged in a single patch.  Other than cosmetic difference
(ie. DBG() vs. pr_debug()), the implementations are identical.

of_irq_to_resource() is also merged, but in this case the
implementations are different.  This patch drops the microblaze version
and uses the powerpc implementation unchanged.  The microblaze version
essentially open-coded irq_of_parse_and_map() which it does not need
to do.  Therefore the powerpc version is safe to adopt.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>

Merge common code between PowerPC and Microblaze.  SPARC implements
irq_of_parse_and_map(), but the implementation is different, so it
does not use this code.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jeremy Kerr <jeremy.kerr@canonical.com>