state_lock is a heavily contended global lock. We don't want to grab
that while simultaneously holding the inode->i_lock.

Add a new per-nfs4_file lock that we can use to protect the
per-nfs4_file delegation list. Hold that while walking the list in the
break_deleg callback and queue the workqueue job for each one.

The workqueue job can then take the state_lock and do the list
manipulations without the i_lock being held prior to starting the
rpc call.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

It's just an obfuscated INIT_WORK call. Just make the work_func_t a
non-static symbol and use a normal INIT_WORK call.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The current enforcement of deny modes is both inefficient and scattered
across several places, which makes it hard to guarantee atomicity. The
inefficiency is a problem now, and the lack of atomicity will mean races
once the client_mutex is removed.

First, we address the inefficiency. We have to track deny modes on a
per-stateid basis to ensure that open downgrades are sane, but when the
server goes to enforce them it has to walk the entire list of stateids
and check against each one.

Instead of doing that, maintain a per-nfs4_file deny mode. When a file
is opened, we simply set any deny bits in that mode that were specified
in the OPEN call. We can then use that unified deny mode to do a simple
check to see whether there are any conflicts without needing to walk the
entire stateid list.

The only time we'll need to walk the entire list of stateids is when a
stateid that has a deny mode on it is being released, or one is having
its deny mode downgraded. In that case, we must walk the entire list and
recalculate the fi_share_deny field. Since deny modes are pretty rare
today, this should be very rare under normal workloads.

To address the potential for races once the client_mutex is removed,
protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to
make sure that any deny mode we want to apply won't conflict with
existing access. If that's ok, then have nfs4_file_get_access check that
new access to the file won't conflict with existing deny modes.

If that also passes, then get file access references, set the correct
access and deny bits in the stateid, and update the fi_share_deny field.
If opening the file or truncating it fails, then unwind the whole mess
and return the appropriate error.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We never use anything above bit #3, so an unsigned long for each is
wasteful. Shrink them to a char each, and add some WARN_ON_ONCE calls if
we try to set or clear bits that would go outside those sizes.

Note too that because atomic bitops work on unsigned longs, we have to
abandon their use here. That shouldn't be a problem though since we
don't really care about the atomicity in this code anyway. Using them
was just a convenient way to flip bits.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

lookup_clientid is preferable to find_confirmed_client since it's able
to use the cached client in the compound state.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

If the client were to disappear from underneath us while we're holding
a session reference, things would be bad. This cleanup helps ensure
that it cannot, which will be a possibility when the client_mutex is
removed.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Now that we know that we won't have several lockowners with the same,
owner->data, we can simplify nfsd4_release_lockowner and get rid of
the lo_list in the process.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Just like open-owners, lock-owners are associated with a name, a clientid
and, in the case of minor version 0, a sequence id. There is no association
to a file.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The client is actually asking for 2532 bytes.  I suspect that's a
mistake.  But maybe we can allow some more.  In theory lock needs more
if it might return a maximum-length lockowner in the denied case.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

They do not need to be used outside fs/nfsd/nfs4state.c
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two.  Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Do a minimal SP4_MACH_CRED implementation suggested by Trond, ignoring
the client-provided spo_must_* arrays and just enforcing credential
checks for the minimum required operations.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

A 4.1 server must notify a client that has had any state revoked using
the SEQ4_STATUS_RECALLABLE_STATE_REVOKED flag.  The client can figure
out exactly which state is the problem using CHECK_STATEID and then free
it using FREE_STATEID.  The status flag will be unset once all such
revoked stateids are freed.

Our server's only recallable state is delegations.  So we keep with each
4.1 client a list of delegations that have timed out and been recalled,
but haven't yet been freed by FREE_STATEID.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Closed stateid's are kept around a little while to handle close replays
in the 4.0 case.  So we stash them in the last-used stateid in the
oo_last_closed_stateid field of the open owner.  We can free that in
encode_seqid_op_tail once the seqid on the open owner is next
incremented.  But we don't want to do that on the close itself; so we
set NFS4_OO_PURGE_CLOSE flag set on the open owner, skip freeing it the
first time through encode_seqid_op_tail, then when we see that flag set
next time we free it.

This is unnecessarily baroque.

Instead, just move the logic that increments the seqid out of the xdr
code and into the operation code itself.

The justification given for the current placement is that we need to
wait till the last minute to be sure we know whether the status is a
sequence-id-mutating error or not, but examination of the code shows
that can't actually happen.
Reported-by: NYanchuan Nian <ycnian@gmail.com>
Tested-by: NYanchuan Nian <ycnian@gmail.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We only ever traverse the hash chains in the forward direction, so a
double pointer list head isn't really necessary.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This changes session destruction to be similar to client destruction in
that attempts to destroy a session while in use (which should be rare
corner cases) result in DELAY.  This simplifies things somewhat and
helps meet a coming 4.2 requirement.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

When a setclientid_confirm or create_session confirms a client after a
client reboot, it also destroys any previous state held by that client.

The shutdown of that previous state must be careful not to free the
client out from under threads processing other requests that refer to
the client.

This is a particular problem in the NFSv4.1 case when we hold a
reference to a session (hence a client) throughout compound processing.

The server attempts to handle this by unhashing the client at the time
it's destroyed, then delaying the final free to the end.  But this still
leaves some races in the current code.

I believe it's simpler just to fail the attempt to destroy the client by
returning NFS4ERR_DELAY.  This is a case that should never happen
anyway.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Dropping the session's reference count after the client's means we leave
a window where the session's se_client pointer is NULL.  An xpt_user
callback that encounters such a session may then crash:

[  303.956011] BUG: unable to handle kernel NULL pointer dereference at 0000000000000318
[  303.959061] IP: [<ffffffff81481a8e>] _raw_spin_lock+0x1e/0x40
[  303.959061] PGD 37811067 PUD 3d498067 PMD 0
[  303.959061] Oops: 0002 [#8] PREEMPT SMP
[  303.959061] Modules linked in: md5 nfsd auth_rpcgss nfs_acl snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc microcode psmouse snd_timer serio_raw pcspkr evdev snd soundcore i2c_piix4 i2c_core intel_agp intel_gtt processor button nfs lockd sunrpc fscache ata_generic pata_acpi ata_piix uhci_hcd libata btrfs usbcore usb_common crc32c scsi_mod libcrc32c zlib_deflate floppy virtio_balloon virtio_net virtio_pci virtio_blk virtio_ring virtio
[  303.959061] CPU 0
[  303.959061] Pid: 264, comm: nfsd Tainted: G      D      3.8.0-ARCH+ #156 Bochs Bochs
[  303.959061] RIP: 0010:[<ffffffff81481a8e>]  [<ffffffff81481a8e>] _raw_spin_lock+0x1e/0x40
[  303.959061] RSP: 0018:ffff880037877dd8  EFLAGS: 00010202
[  303.959061] RAX: 0000000000000100 RBX: ffff880037a2b698 RCX: ffff88003d879278
[  303.959061] RDX: ffff88003d879278 RSI: dead000000100100 RDI: 0000000000000318
[  303.959061] RBP: ffff880037877dd8 R08: ffff88003c5a0f00 R09: 0000000000000002
[  303.959061] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[  303.959061] R13: 0000000000000318 R14: ffff880037a2b680 R15: ffff88003c1cbe00
[  303.959061] FS:  0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[  303.959061] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  303.959061] CR2: 0000000000000318 CR3: 000000003d49c000 CR4: 00000000000006f0
[  303.959061] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  303.959061] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  303.959061] Process nfsd (pid: 264, threadinfo ffff880037876000, task ffff88003c1fd0a0)
[  303.959061] Stack:
[  303.959061]  ffff880037877e08 ffffffffa03772ec ffff88003d879000 ffff88003d879278
[  303.959061]  ffff88003d879080 0000000000000000 ffff880037877e38 ffffffffa0222a1f
[  303.959061]  0000000000107ac0 ffff88003c22e000 ffff88003d879000 ffff88003c1cbe00
[  303.959061] Call Trace:
[  303.959061]  [<ffffffffa03772ec>] nfsd4_conn_lost+0x3c/0xa0 [nfsd]
[  303.959061]  [<ffffffffa0222a1f>] svc_delete_xprt+0x10f/0x180 [sunrpc]
[  303.959061]  [<ffffffffa0223d96>] svc_recv+0xe6/0x580 [sunrpc]
[  303.959061]  [<ffffffffa03587c5>] nfsd+0xb5/0x140 [nfsd]
[  303.959061]  [<ffffffffa0358710>] ? nfsd_destroy+0x90/0x90 [nfsd]
[  303.959061]  [<ffffffff8107ae00>] kthread+0xc0/0xd0
[  303.959061]  [<ffffffff81010000>] ? perf_trace_xen_mmu_set_pte_at+0x50/0x100
[  303.959061]  [<ffffffff8107ad40>] ? kthread_freezable_should_stop+0x70/0x70
[  303.959061]  [<ffffffff814898ec>] ret_from_fork+0x7c/0xb0
[  303.959061]  [<ffffffff8107ad40>] ? kthread_freezable_should_stop+0x70/0x70
[  303.959061] Code: ff ff 5d c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 65 48 8b 04 25 f0 c6 00 00 48 89 e5 83 80 44 e0 ff ff 01 b8 00 01 00 00 <3e> 66 0f c1 07 0f b6 d4 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f
[  303.959061] RIP  [<ffffffff81481a8e>] _raw_spin_lock+0x1e/0x40
[  303.959061]  RSP <ffff880037877dd8>
[  303.959061] CR2: 0000000000000318
[  304.001218] ---[ end trace 2d809cd4a7931f5a ]---
[  304.001903] note: nfsd[264] exited with preempt_count 2
Reported-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Change uid and gid in struct nfsd4_cb_sec to be of type kuid_t and
kgid_t.

In nfsd4_decode_cb_sec when reading uids and gids off the wire convert
them to kuids and kgids, and if they don't convert to valid kuids or
valid kuids ignore RPC_AUTH_UNIX and don't fill in any of the fields.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

I also log basic information that I can figure out about the type of
state (such as number of locks for each client IP address).  This can be
useful for checking that state was actually dropped and later for
checking if the client was able to recover.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The eventual goal is to forget state based on ip address, so it makes
sense to call this function in a for-each-client loop until the correct
amount of state is forgotten.  I also use this patch as an opportunity
to rename the forget function from "func()" to "forget()".
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There were only a small number of functions in this file and since they
all affect stored state I think it makes sense to put them in state.h
instead.  I also dropped most static inline declarations since there are
no callers when fault injection is not enabled.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Passing net context looks as overkill.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This patch replaces init_net by SVC_NET(), where possible and also passes
proper context to nested functions where required.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This hash holds nfs4_clients info, which are network namespace aware.
So let's make it allocated per network namespace.

Note: this hash is used only by legacy tracker. So let's allocate hash in
tracker init.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

And use it's net where possible.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Remove the cl_recdir field from the nfs4_client struct. Instead, just
compute it on the fly when and if it's needed, which is now only when
the legacy client tracking code is in effect.

The error handling in the legacy client tracker is also changed to
handle the case where md5 is unavailable. In that case, we'll warn
the admin with a KERN_ERR message and disable the client tracking.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The current code requires that we md5 hash the name in order to store
the client in the confirmed and unconfirmed trees. Change it instead
to store the clients in a pair of rbtrees, and simply compare the
cl_names directly instead of hashing them. This also necessitates that
we add a new flag to the clp->cl_flags field to indicate which tree
the client is currently in.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

When nfsd starts, the legacy reboot recovery code creates a tracking
struct for each directory in the v4recoverydir. When the grace period
ends, it basically does a "readdir" on the directory again, and matches
each dentry in there to an existing client id to see if it should be
removed or not. If the matching client doesn't exist, or hasn't
reclaimed its state then it will remove that dentry.

This is pretty inefficient since it involves doing a lot of hash-bucket
searching. It also means that we have to keep relying on being able to
search for a nfs4_client by md5 hashed cl_recdir name.

Instead, add a pointer to the nfs4_client that indicates the association
between the nfs4_client_reclaim and nfs4_client. When a reclaim operation
comes in, we set the pointer to make that association. On gracedone, the
legacy client tracker will keep the recdir around iff:

1/ there is a reclaim record for the directory

...and...

2/ there's an association between the reclaim record and a client record
-- that is, a create or check operation was performed on the client that
matches that directory.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Later callers will need to make changes to the record.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We'll need to be able to call this from nfs4recover.c eventually.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently, it takes a client pointer, but later we're going to need to
search for these records without knowing whether a matching client even
exists.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

For now this only adds support for AUTH_NULL.  (Previously we assumed
AUTH_UNIX.)  We'll also need AUTH_GSS, which is trickier.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

I've found it confusing having the only references to
nfsd4_do_callback_rpc() in a different file.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>