I missed a few paragraphs in the docbook that need to be pulled into
the fbdev vfunc docs.

v2: Spelling fixes from Thierry.

Cc: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-3-git-send-email-daniel.vetter@ffwll.chReviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Just a remnant from an old iteration of this patch that I've forgotten
to remove: We only need the encoder to figure out whether it has been
reassigned in this update already or not to figure out whether there's
a conflict or not.
Reported-by: NThierry Reding <thierry.reding@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-2-git-send-email-daniel.vetter@ffwll.chReviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

DRM Docbook is now Markdown ready. This means its doc is able to
use markdown text on it.

* Documentation/DocBook/drm.tmpl: Contains a table duplicated from
  drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore

* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used
  to look pretty bad on html. Fixed by using proper code markup.

* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make
  a proper markup list.

* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables,
  it doesn't support table cell spanning. But we can use fixed-width
  for those special cases.

* include/drm/drm_vma_manager.h: Another code example that should be
  proper indented with four spaces.

v2 (Daniel): Adjust name to gpu.xml due to rename.

v3 (Daniel):
Split out the actual enabling in the Makefile - this way we can merge
the conversion, while just keeping the enabling in a drm-private tree.

Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> (v1)
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448471279-19748-2-git-send-email-daniel.vetter@ffwll.ch

This is the "fix igt basic test set issues" edition.
- more PSR fixes from Rodrigo, getting closer
- tons of fifo underrun fixes from Ville
- runtime pm fixes from Imre, Daniel Stone
- fix SDE interrupt handling properly (Jani Nikula)
- hsw/bdw fdi modeset sequence fixes (Ville)
- "don't register bad VGA connectors and fall over" fixes (Ville)
- more fbc fixes from Paulo
- and a grand total of exactly one feature item: Implement dma-buf/fence based
  cross-driver sync in the i915 pageflip path (Alex Goins)

* tag 'drm-intel-next-2015-12-04-1' of git://anongit.freedesktop.org/drm-intel: (70 commits)
  drm/i915: Update DRIVER_DATE to 20151204
  drm/i915/skl: Add SKL GT4 PCI IDs
  Revert "drm/i915: Extend LRC pinning to cover GPU context writeback"
  drm/i915: Correct the Ref clock value for BXT
  drm/i915: Restore skl_gt3 device info
  drm/i915: Fix RPS pointer passed from wait_ioctl to i915_wait_request
  Revert "drm/i915: Remove superfluous NULL check"
  drm/i915: Clean up device info structure definitions
  drm/i915: Remove superfluous NULL check
  drm/i915: Handle cdclk limits on broadwell.
  i915: wait for fence in prepare_plane_fb
  i915: wait for fence in mmio_flip_work_func
  drm/i915: Extend LRC pinning to cover GPU context writeback
  drm/i915/guc: Clean up locks in GuC
  drm/i915: only recompress FBC after flushing a drawing operation
  drm/i915: get rid of FBC {,de}activation messages
  drm/i915: kill fbc.uncompressed_size
  drm/i915: use a single intel_fbc_work struct
  drm/i915: check for FBC planes in the same place as the pipes
  drm/i915: alloc/free the FBC CFB during enable/disable
  ...

Previously, the comment was inconsistent. EDEADLK is what the ww_mutex
mechanism really returns.
Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This pull request brings in 3D acceleration support for the VC4 GPU.
While there is still performance work to be done (particularly
surrounding RCL generation), the CL submit ABI should be settled and
done now.

* tag 'drm-vc4-next-2015-12-11' of http://github.com/anholt/linux:
  drm/vc4: Add an interface for capturing the GPU state after a hang.
  drm/vc4: Add support for async pageflips.
  drm/vc4: Add support for drawing 3D frames.
  drm/vc4: Bind and initialize the V3D engine.
  drm/vc4: Fix a typo in a V3D debug register.
  drm/vc4: Add an API for creating GPU shaders in GEM BOs.
  drm/vc4: Add create and map BO ioctls.
  drm/vc4: Add a BO cache.
  drm: Create a driver hook for allocating GEM object structs.

Merge branch 'exynos-drm-next' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

- Support runtime pm
  . In case of most ARM SoC, each IP has each power domain which should be
    controlled by each IP driver using runtime pm interface. So this patch
    series makes each IP driver to control its own power domain when
    drm dpms is requested.
- Support of_graph based dt binding for DP panel.
  . This patch series adds of_graph based dt binding for DP panel.
    And also it keeps backward compatibility. This includes dt binding
    patch so I got Acked-by from Krzysztof Kozlowski who is a Exynos
    SoC maintainer and from Rob Herring who is a device tree maintainer.

- Cleanup for Exynos DRM IPP enhancement.
  . This patch series is a first step for enhancing existing IPP framework
    which will integrate existing IPP functions with DRM KMS part so that
    these can be transparent to userspace. For other portion of the patch
    series, we will have more times for the review.]

* 'exynos-drm-next' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: (29 commits)
  drm/exynos: gem: remove old unused prototypes
  drm/exynos: fimd: fix dma burst size setting for small plane size
  drm/exynos: fix clipping when scaling is enabled
  drm/exynos: mixer: use ratio precalculated in exynos_state
  drm/exynos: add generic check for plane state
  drm/exynos: introduce exynos_drm_plane_config structure
  drm/exynos: mixer: enable video overlay plane only when VP is available
  drm/exynos: mixer: use crtc->state->adjusted_mode instead of crtc->mode
  drm/exynos: introduce exynos_drm_plane_state structure
  drm/exynos: move dma_addr attribute from exynos plane to exynos fb
  drm/exynos: exynos7-decon: remove excessive check
  drm/exynos: rotator: convert to common clock framework
  drm/exynos: gsc: add device tree support and remove usage of static mappings
  drm/exynos: gsc: fix wrong pm_runtime state
  drm/exynos: gsc: prepare and unprepare gsc clock
  ARM: dts: Use OF graph for DP to panel connection in exynos5800-peach-pi
  dt-bindings: exynos-dp: update ports node binding for panel
  drm/exynos: dp: add of_graph dt binding support for panel
  drm/exynos: decon: remove unused variables
  drm/exynos: dsi: modify a error type when getting a node failed
  ...

Last (very likely at least) drm-misc pull for 4.5. 3 big things:
- piles of docs for kms vtables.
- drm.debug dmesg output prettification from Ville (i915 parts are for 4.6
  I think)
- connector mode probing/validating/merging cleanup from Ville.

[airlied : fix drm_encoder_init conflict.]

* tag 'topic/drm-misc-2015-12-14' of git://anongit.freedesktop.org/drm-intel: (43 commits)
  drm: modes: Revert cc344980 "replace simple_strtoul by kstrtouint"
  drm: Expand the drm_helper_probe_single_connector_modes() docs
  drm: Allow override_edid to override the firmware EDID
  drm/sti: Drop bogus drm_mode_sort() call
  drm: Drop drm_helper_probe_single_connector_modes_nomerge()
  drm: Only merge mode type bits between new probed modes
  drm: Flatten drm_mode_connector_list_update() a bit
  drm: Rename MODE_UNVERIFIED to MODE_STALE
  drm: Don't overwrite UNVERFIED mode status to OK
  drm: Add plane->name and use it in debug prints
  drm: Add crtc->name and use it in debug messages
  drm: Use driver specified encoder name
  drm: Pass 'name' to drm_encoder_init()
  drm: Pass 'name' to drm_universal_plane_init()
  drm: Pass 'name' to drm_crtc_init_with_planes()
  drm: Documentation style guide
  drm: Document drm_encoder/crtc_helper_funcs
  drm: Move drm_display_mode an related docs into kerneldoc
  drm/atomic-helper: Mention the new system/resume helpers the docs
  drm: Document drm_connector_helper_funcs
  ...

Main thing this time around is DSI support for msm8960/apq8064, which
should be helpful for getting an upstream kernel working on
nexus7/nexus4/etc.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
  drm/msm/mdp: fix a problematic usage of WARN_ON()
  drm/msm/dsi: Added missing mutex_unlock
  drm/msm: ratelimit error irq msgs
  drm/msm: Use unlocked gem unreferencing
  drm/msm: trivial whitespace fix
  dt-bindings: msm/dsi: Add DSIv2 documentation
  dt-bindings: msm/dsi: Fix the order in which clocks are listed
  drm/msm/dsi: Enable MMSS SPFB port via syscon
  drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
  drm/msm/dsi: Add dsi_cfg for APQ8064
  drm/msm/dsi: Set up link clocks for DSIv2
  drm/msm/dsi: Parse bus clocks from a list
  drm/msm/dsi: Delay dsi_clk_init
  drm/msm/dsi: Use a better way to figure out DSI version
  drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
  drm/msm/dsi: Add support for 28nm PHY on 8960
  drm/msm/dsi: Don't get byte/pixel source clocks from DT
  drm/msm/mdp4: Initialize DSI encoders
  drm/msm/mdp4: Call custom round_pixclk helper only if the encoder type is TMDS
  drm/msm/dsi: Add a mdp4 encoder for DSI
  ...

WARN_ON() takes a condition rather than a format string. This patch
converted WARN_ON() to WARN() instead.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

in case of failed to get iova, function was returning without releasing
the mutex. Added it.
Signed-off-by: NSaurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

When things go bad and don't recover, we can be getting an err irq every
vblank.
Signed-off-by: NRob Clark <robdclark@gmail.com>

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Add additional property info needed for DSIv2 DT.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

List the clocks in the order that's used in DT. We don't have mdp/dsi
DT nodes for any SoC in upstream yet, but we align with the order
we intend to use.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We currently use iommu allocated DMA buffers for sending DSI commands.
DSIv2 doesn't have a port connected to the MDP iommu. Therefore, it
can't use iommu allocated buffers to fetch DSI commands.

Use a regular contiguous DMA buffer if we are DSIv2.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add a dsi_cfg entry for APQ8064. Since this is the first DSIv2 chip to
be supported, add a list of bus clocks that are required by the DSIv2
block.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DSIv2 (DSI on older A family chips) has slightly different link clock
requirements.

First, we have an extra clock called src_clk (with a dedicated RCG).
This is required by the DSI controller to process the pixel data
coming from MDP. It needs to be set at the rate "pclk * bytes_per_pixel".

We also need to explicitly configure esc_clk. On DSI6G chips, we don't
need to set a rate to esc_clk because its RCG is always sourced from
crystal clock (19.2 Mhz in all cases), which is within the escape clock
frequency range in the mipi DSI spec. For chips with DSIv2, the crystal
clock rate may not be within the required range (27Mhz on APQ8064).
Therefore, we derive it from the DSI byte clock. We calculate an esc_clck
rate that is within the mipi spec and also divisible by the byte clock
rate.

When setting rate and enabling the link clocks, we make sure that byte_clk
is configured before esc_clk, and src_clk before pixel_clk. We create two
different link_enable funcs for DSI6G and DSIv2 since the sequences are
different.

We also obtain two extra source clocks (dsi_src_clk and esc_src_clk) and
set their parent to the clocks provided by DSI PLL.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DSI bus clocks seem to vary between different DSI host versions, and the
SOC to which they belong. Even the enable/disable sequence varies.

Provide a list of bus clock names in dsi_cfg. The driver will use this to
retrieve the clocks, and enable/disable them.

Add bus clock lists for DSI6G, and DSI for MSM8916(this is DSI6G too, but
there is no MMSS_CC specific clock since there is no MMSS clock controller
on 8916).
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Initialize clocks only after we get the DSI host version. This will allow
us to get clocks using a pre-defined list based on the DSI major/minor
version of the host. This is required since clock requirements of
different major DSI revisions(v2 vs 6g) aren't the same.

Modify dsi_get_version to get the interface clock, and then put it after
it is used.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The current version checking mechanism works fine for DSI6G blocks. It
doesn't work so well for older generation DSIv2 blocks.

The initial read of REG_DSI_6G_HW_VERSION(offset 0x0) would result in a
read of REG_DSI_CTRL for DSIv2. This register won't necessarily be 0 on
DSIv2. It can be non zero if DSI was previously initialized by the
bootloader.

Instead of reading offset 0x0, we now read offset 0x1f0. For DSIv2, this
register is DSI_VERSION, and is bound to be non-zero. On DSI6G, this
register(offset 0x1f0) is SCRATCH_REGISTER_0, which no one ever seems to
touch, and from all register dumps I'vc seen, holds 0 all the time.

Modify dsi_get_version to read REG_DSI_VERSION to determine whether we
are DSI6G or DSIv2.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We retrieve the byte and pixel source clocks (RCG clocks) in the dsi
driver via DT. These are needed so that we can re-parent these source
clocks if we want to drive it using a different DSI PLL.

We shouldn't get these via DT because they aren't clocks that directly
serve as inputs to the dsi host.

Fortunately, there is a static parent-child link between the
byte_clk_src/pixel_clk_src and byte_clk/pixel_clk clocks. So, we can
retrieve the source clocks via clk_get_parent.

Do this instead of retrieving via DT.

Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Create DSI encoders during modeset_init. The 2 encoders should ideally be
one command mode and one video mode DSI encoder respectively, but we don't
support command mode yet. We just create 2 of the same because the dsi
driver expects it, we end up using only the first one.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The mdp_kms round_pixclk op creates problems when we have more
interfaces in use. It calls the DTV encoder's helper by default.

Check on encoder type and call the corresponding encoder's
func meant for rounding pixel clock. DSI and LVDS don't require
rounding, so just return rate in their case.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Create an mdp4 incoder for DSI. Only DSI video mode is supported as of
now.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NVinay Simha BN <vinaysimha@inforcecomputing.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Currently, the driver defers if it doesn't find a drm_panel. This forces
us to have a drm_panel, if not, the driver isn't usable.

Make the lcdc encoder initialization independent of the availability of
the drm panel. We only check if there is a panel node specified in DT. If
it isn't, then we don't initialize the encoder at all. The panel node is
passed to the lcdc encoder and lvds connector drivers.

The connector driver takes the responsibility to retrieve the drm_panel
from the panel node, and update the status on whether the panel is
connected or not. This makes the panel usable even if the drm_panel
driver is inserted as a module later on.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

modeset_init() for mdp4 isn't very flexible. That makes it hard to add
more interfaces.

Split out the encoder/connector creation code in modeset_init into a
separate function. This is similar to what's done in modeset_init for
mdp5.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Remove CONFIG_OF checks in adreno_device.c. The downstream bus scaling
stuff is included only when CONFIG_OF is not set. So, remove that too.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We now only care about kernels that support DT. Remote the non-DT stuff.
While we're at it, use of_device_get_match_data to retrieve match data.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

We don't intend to use downstream non-DT kernels anymore, so remove
CONFIG_OF checks.

Update the TODO comment so that we don't forget about max_clk setting
for non APQ8064 chips having MDP4.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Update DT bindings for mdp. We now have a more uniform and future-proof
set of compatible strings.

MDP5 bindings were missing. Add those and update details on the
clock-names properties.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Create distinct compatible strings for mdp4 and mdp5. Keep "qcom,mdss_mdp"
as is to support downstream kernels.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Support for non-DT kernels was mainly to use v3.4 downstream kernels.
This is no longer a priority now as we have reasonable support upstream.

Remove CONFIG_OF from the top level msm_drv.c file. While we're at it,
clean up the data matching process using of_device_get_match_data.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

MDP5 has line count and frame count registers for each interface. Enable
these counters and use them to implement the get_vblank_timestamp drm
driver op.

The line counter starts with the value 1 at the beginning of the VSYNC
pulse and ends with value VTOTAL at the end of VFP. This value is used
to determine whether we're in blanking period or not, and an adjusted
value of this counter is used to get vpos as expected by
get_scanout_position. Since there is no way to calculate hpos, we always
set it to 0.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

This patch removes old, unused function prototypes from exynos_drm_gem.h.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch fixes trashed display of buffers cropped to very small width.
Even if DMA is unstable and causes tearing when changing the burst size,
it is still better than displaying a garbage.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>