- 02 6月, 2017 3 次提交
-
-
由 Sara Sharon 提交于
Add configuration for allowing driver's nvm parsing and bypassing the new host command, for debugging. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
This API replaces the complex NVM parsing of the iwlwifi module. Instead, we get all needed data from firmware. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Avoid using the global flush and move to flush per station whenever possible in DQA mode. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 01 6月, 2017 4 次提交
-
-
由 amit karwar 提交于
linux-firmware maintainers prefer to have a subdirectory for firmware files. Code is changed here to pick firmware file from a subdirectory. Firmware file with a new loading mechanism will be submitted inside rsi directory. Signed-off-by: NAmitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Xinming Hu 提交于
AP interface need process remain-on-channel firmware event and notify cfg80211, this will be used in the listen-stage of p2p find procedure. Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Shawn Lin 提交于
We don't need to check if the list is empty separately as we could use list_first_entry_or_null to cover it. Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com> Reviewed-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Colin Ian King 提交于
mac is being assigned twice, remove redundant 2nd assignment. Detected by CoverityScan, CID#1437554 ("Incorrect expression") Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 31 5月, 2017 5 次提交
-
-
由 Xinming Hu 提交于
The next packet length will be used by interface driver, to check if the next packet still could be aggregated. Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NCathy Luo <cluo@marvell.com> Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Xinming Hu 提交于
Aggregation will wait for next packet until limit aggr size/number reach. Packet might be drop and also packet dequeue will be stop in some cases. This patch add timer to flush packets in aggregation list to avoid long time waiting. Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NCathy Luo <cluo@marvell.com> Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Xinming Hu 提交于
Instead of using 4KB packet buffer for data transfer, new chipset have more device memory. This patch try to aggregation packets in an 16KB buffer. In this way, totally usb transaction cost will be reduced. Thoughput test on usb 2.0 show both TCP TX and UPD TX promote ~40M, from ~240M to ~280M. This feature is default disabled, and can be enabled by module parameter, like: insmod mwifiex.ko aggr_ctrl=1 Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NCathy Luo <cluo@marvell.com> Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Xinming Hu 提交于
we have observed host system hang when device firmware crash, stack trace show it was an use-after-free case: previous submitted urb will be holding in usbcore, and given back to device driver when device disconnected, while the urb have been freed in usb device disconnect handler. This patch kill the holding urb before free its memory. Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Xinming Hu 提交于
Usb tx aggregation feature will utilize 4-bytes bus interface header, otherwise it will be set to zero in default case. Signed-off-by: NXinming Hu <huxm@marvell.com> Signed-off-by: NCathy Luo <cluo@marvell.com> Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 24 5月, 2017 28 次提交
-
-
由 Igor Mitsyanko 提交于
This patch adds support for new FullMAC WiFi driver for Quantenna QSR10G chipsets. QSR10G (aka Pearl) is Quantenna's 8x8, 160M, 11ac offering. QSR10G supports 2 simultaneous WMACs - one 5G and one 2G. 5G WMAC supports 160M, 8x8 configuration. FW supports up to 8 concurrent virtual interfaces on each WMAC. Patch introduces 2 new drivers: - qtnfmac.ko for interfacing with kernel wireless core - qtnfmac_pearl_pcie.ko for interfacing with hardware over PCIe interface Signed-off-by: NDmitrii Lebed <dlebed@quantenna.com> Signed-off-by: NSergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: NSergey Matyukevich <smatyukevich@quantenna.com> Signed-off-by: NBindu Therthala <btherthala@quantenna.com> Signed-off-by: NHuizhao Wang <hwang@quantenna.com> Signed-off-by: NKamlesh Rath <krath@quantenna.com> Signed-off-by: NAvinash Patil <avinashp@quantenna.com> Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Dan Carpenter 提交于
We only want to disable this if bt_disable_cnt is >= 2. Fixes: f66509e3 ("rtlwifi: btcoex: Remove 23b 1ant configuration parameter") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Yan-Hsuan Chuang 提交于
When wifi is under concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: NYan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Fine tune the parameters in case of act_bt_sco_hid_only_busy. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Fine tune the parameters in cases of scan, assoc and auth when wifi isn't connected. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Fine tune the parameters in cases of bt_acl_busy and scan when wifi is connected. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Set register settings for coex table fine tune. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Display coex_table_type in log. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Simplify the debug trace log. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Add the definition of wifi in high priority task for bt inquiry. According to driver's notifications, btc will knows whether wifi is in high priority tasks or not. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Count and log special packets of DHCP, EAPOL and ARP, and check whether the interface is in 4-way handshake. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Force antenna setup for no scan result issue Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
When association starts, force antenna setup for no scan result issue. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
If driver announce wifi RF status is off, btc can switch antenna to BT. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
If BT is under WHCK, we enter a special mode. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
BT FW provide more BT status as clues, thus we also display them in coex log to help debug in field. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
This change is highly related to init_hwconfig that was decomposed into two parts for better program flow. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
In case of wifi_only, we can simply switch antenna to wifi. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
The larger the bt a2dp bit pool is, the more time bt needs to receive them. If we do not adjust the wifi duration, the voice quality will be low. Hence we reduce the time that wifi holds, to improve the a2dp service. If the bt is slave, it may receive a packet at any time, so we need to mark them as high priority packets in case of packet loss Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Log the scan procedure, and update ap_num for future usage when scan done. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ping-Ke Shih 提交于
Since wifi and BT share the same physical antenna, we should switch antenna to fit every situation. Signed-off-by: NPing-Ke Shih <pkshih@realtek.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Tom Gaudasinski 提交于
Make Epson WN7512BEP work by adding its device-id to rt2800usb. Device contains a Ralink RT3071L, registers as vendor Accton/Arcadyan. Signed-off-by: NTom Gaudasinski <tomg@records.headdesk.com.au> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Markus Elfring 提交于
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Acked-by: NMichael Büsch <m@bues.ch> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Arnd Bergmann 提交于
This is a semi-automated conversion to change rt2x00_desc_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<_rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Arnd Bergmann 提交于
This is a semi-automated conversion to change rt2800_eeprom_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2800_eeprom_read\(_from_array\|\)\>(.*, .*\), &\(.*\));:\3 = \1);:' drivers/net/wireless/ralink/rt2x00/rt2800lib.c Some manual tweaking was required here to work around the line wraps. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Arnd Bergmann 提交于
This is a semi-automated conversion to change rt2x00_eeprom_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_eeprom_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt2x00_eeprom_read\):= \1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Arnd Bergmann 提交于
This is a semi-automated conversion to change *_bbp_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt.*_bbp_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt.*_bbp_dcoc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt.*_bbp_read\):\1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-