nand_ooblayout_lp_hamming_ops can be made static as it does not need to be
in global scope.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

If we fail any time after calling nand_detect(), then we don't call the
vendor-specific ->cleanup() callback, and we'll leak any resources the
vendor-specific code might have allocated.

Mark the "fix" against the first commit that started allocating anything
in ->init().

Fixes: 626994e0 ("mtd: nand: hynix: Add read-retry support for 1x nm MLC NANDs")
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

This bug seems to have been here forever, although we came close to
fixing all of them in [1]!

[1] 11eaf6df ("mtd: nand: Remove BUG() abuse in nand_scan_tail")
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The old 1-bit hamming layout requires ECC data to be placed at a
fixed offset, and not necessarily at the end of the OOB area.
Add this old layout back in order to fix legacy setups.

Fixes: 41b207a7 ("mtd: nand: implement the default mtd_ooblayout_ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: NAlexander Couzens <lynxis@fe80.eu>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

In some cases, nand_do_{read,write}_ops is passed with unaligned
ops->datbuf.  Drivers using DMA will be unhappy about unaligned
buffer.

The new struct member, buf_align, represents the minimum alignment
the driver require for the buffer.  If the buffer passed from the
upper MTD layer does not have enough alignment, nand_do_*_ops will
use bufpoi.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Some NAND controllers are using DMA engine requiring a specific
buffer alignment.  The core provides no guarantee on the nand_buffers
pointers, which forces some drivers to allocate their own buffers
and pass the NAND_OWN_BUFFERS flag.

Rework the nand_buffers allocation logic to allocate each buffer
independently.  This should make most NAND controllers/DMA engine
happy, and allow us to get rid of these custom buf allocation in
NAND controller drivers.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The comment for ecc.read_page() requires that it should return
"0 if bitflips uncorrectable".

Actually, drivers could return positive values when uncorrectable
bitflips occur.  For example, nand_read_page_swecc() is the case.
If ecc.correct() returns -EBADMSG for the first ECC sector, and
a positive value for the second one, nand_read_page_swecc() returns
a positive max_bitflips and increments ecc_stats.failed for the same
page.

The requirement can be relaxed by tweaking nand_do_read_ops().
Move the max_bitflips calculation below the retry.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The last/only user of the chip->write_page() hook (the Atmel NAND
controller driver) has been reworked and is no longer specifying a custom
->write_page() implementation.
Drop this hook before someone else start abusing it.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Set Features (0xEF) command toggles the R/B# pin after 4 sub feature
parameters are written.

Currently, nand_command(_lp) calls chip->dev_ready immediately after
the address cycle because NAND_CMD_SET_FEATURES falls into default:
label.  No wait is needed at this point.

If you see nand_onfi_set_features(), R/B# is already cared by the
chip->waitfunc call.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Read ID (0x90) command does not toggle the R/B# pin.  Without this
patch, NAND_CMD_READID falls into the default: label, then R/B# is
checked by chip->dev_ready().
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The nand_default_block_markbad() and scan_block_fast() use high
level APIs to get access to the BBM.

On the other hand, nand_block_bad (the default implementation of
->block_bad) calls the lower level ->cmdfunc hook.  This prevents
drivers from using ->ecc.read_oob() even if optimized read operation
is implemented.  Besides, some NAND controllers may protect the BBM
with ECC.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Currently, it is valid to specify both "nand-ecc-step-size" and
"nand-ecc-strength", but not allowed to set only one of them.

This requirement has a conflict with "nand-ecc-maximize"; this flag
is used when you want the driver to choose the best ECC strength.
If "nand-ecc-maximize" is set, "nand-ecc-strength" is very likely to
be unset.

It would be possible to make the if-conditional more complex by
adding the check for the NAND_ECC_MAXIMIZE flag, but I chose to drop
the check entirely.  I thought of the situation where the hardware
has a fixed ECC step size (so it can be hard-coded in the driver),
whereas the ECC strength is configurable by software.  In that case,
we may want to only set "nand-ecc-strength" (or "nand-ecc-maximize")
in DT.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Move Macronix specific initialization logic into nand_macronix.c. This
is part of the "separate vendor specific code from core" cleanup
process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Move AMD/Spansion specific initialization/detection logic into
nand_amd.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

Move Micron specific initialization logic into nand_micron.c. This is
part of the "separate vendor specific code from core" cleanup process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

Move Toshiba specific initialization and detection logic into
nand_toshiba.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

Move Hynix specific initialization and detection logic into
nand_hynix.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

Move Samsung specific initialization and detection logic into
nand_samsung.c. This is part of the "separate vendor specific code from
core" cleanup process.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

A lot of NANDs are implementing generic features in a non-generic way,
or are providing advanced auto-detection logic where the NAND ID bytes
meaning changes with the NAND generation.

Providing this vendor specific initialization step will allow us to get
rid of full-id entries in the nand_ids table or all the vendor specific
cases added over the time in the generic NAND ID decoding logic.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

There is no reason to expose the NAND manufacturer table. Provide an
helper function to find manufacturers by their id.

We also turn the nand_manufacturers table into a const array, since its
members are not modified after the initial assignment.

Finally, we remove the sentinel manufacturer entry from the manufacturers
table (we already have the array size information given by ARRAY_SIZE()),
and add the nand_manufacturer_name() helper to handle the "Unknown" case
properly.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Since commit 4722c0e9 ("mtd: nand: change return type of
nand_get_flash_type() to int"), nand_get_flash_type() no longer returns
a nand_flash_dev object.
Rename the function to match this new behavior.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>

Auto-detection functions are passed a busw parameter to retrieve the actual
NAND bus width and eventually set the correct value in chip->options.
Rework the nand_get_flash_type() function to get rid of this extra
parameter and let detection code directly set the NAND_BUSWIDTH_16 flag in
chip->options if needed.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>

Store the NAND ID in struct nand_chip to avoid passing id_data and id_len
as function parameters.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>

Now that struct nand_chip embeds an mtd_info object we can get rid of the
mtd parameter and extract it from the chip parameter with the nand_to_mtd()
helper.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>

We are going to move softlockup APIs out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

<linux/nmi.h> already includes <linux/sched.h>.

Include the <linux/nmi.h> header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

ONFI compliant chips contain the values for the max_bb_per_die and
blocks_per_die fields in the parameter page. When the ONFI paged is
retrieved/parsed the chip's fields are set by the corresponding fields
in the param page.
Signed-off-by: NZach Brown <zach.brown@ni.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electron.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Implement the new mtd function 'max_bad_blocks'. Using the chip's
max_bb_per_die and blocks_per_die fields to determine the maximum bad
blocks to reserve for an MTD.
Signed-off-by: NJeff Westfahl <jeff.westfahl@ni.com>
Signed-off-by: NZach Brown <zach.brown@ni.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electron.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

If your controller already sends the required NAND commands when
reading or writing a page, then the framework is not supposed to
send READ0 and SEQIN/PAGEPROG respectively.
Signed-off-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Since commit d1e1f4e4 ("mtd: nand: add support for reading ONFI
parameters from NAND device"), the returned "type" is never used in
nand_scan_ident().

Make nand_get_flash_type() simply return an integer value in order
to avoid unnecessary ERR_PTR/PTR_ERR dance.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Drivers implementing ->cmd_ctrl() and relying on the default ->cmdfunc()
implementation usually don't wait tCCS when a column change (RNDIN or
RNDOUT) is requested.
Add an option flag to ask the core to do so (note that we keep this as
an opt-in to avoid breaking existing implementations), and make use of
the ->data_interface information is available (otherwise, wait 500ns).
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com>

When changing from one data interface setting to another, one has to
ensure a specific sequence which is described in the ONFI spec.

One of these constraints is that the CE line has go high after a reset
before a command can be sent with the new data interface setting, which
is not guaranteed by the current implementation.

Rework the nand_reset() function and all the call sites to make sure the
CE line is asserted and released when required.

Also make sure to actually apply the new data interface setting on the
first die.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Fixes: d8e725dd ("mtd: nand: automate NAND timings selection")
Reviewed-by: NSascha Hauer <s.hauer@pengutronix.de>
Tested-by: NMarc Gonzalez <marc_gonzalez@sigmadesigns.com>

Introduced by commit fde85cfd ("mtd: nand: Fix nand_command_lp() for
8bits opcodes") and I didn't have the heart to have Boris rewrite his
pull request just for that. Anyway, there's some value in having stable
commit hashes.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Provide a nand_cleanup() function to free all nand related resources
without unregistering the mtd device.
This should allow drivers to call mtd_device_unregister() and handle
its return value and still being able to cleanup all nand related
resources.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDaniel Walter <dwalter@sigma-star.at>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

8 bits opcodes should be followed by a single address cycle. Make the
2nd address cycle dependent of !nand_opcode_8bits(command).
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Add support for ECC maximization when software BCH with
nand_ooblayout_lp_ops layout is used.
Other cases should be handled by the NAND controller driver.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

The generic NAND DT bindings allows one to tweak the ECC strength and
step size to their need. It can be used to lower the ECC strength to
match a bootloader/firmware config, but might also be used to get a better
reliability.

In the latter case, the user might want to use the maximum ECC strength
without having to explicitly calculate the exact value (this value not
only depends on the OOB size, but also on the NAND controller, and can
be tricky to extract).

Add a generic 'nand-ecc-maximize' DT property and the associated
NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
ECC strength and step-size on their own.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NRob Herring <robh@kernel.org>

The NAND framework provides several helpers to query timing modes supported
by a NAND chip, but this implies that all NAND controller drivers have
to implement the same timings selection dance. Also currently NAND
devices can be resetted at arbitrary places which also resets the timing
for ONFI chips to timing mode 0.

Provide a common logic to select the best timings based on ONFI or
->onfi_timing_mode_default information. Hook this into nand_reset()
to make sure the new timing is applied each time during a reset.

NAND controller willing to support timings adjustment should just
implement the ->setup_data_interface() method.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

When NAND devices are resetted some initialization may have to be done,
like for example they have to be configured for the timing mode that
shall be used. To get a common place where this initialization can be
implemented create a nand_reset() function. This currently only issues
a NAND_CMD_RESET to the NAND device. The places issuing this command
manually are replaced with a call to nand_reset().
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

Using "goto" and "switch" statement only makes it harder to follow
control flow and doesn't bring any advantages. Rewrite the code to avoid
using "goto".
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

If no user specified chip->select_chip() function is provided, code in
nand_base.c will automatically set this hook to nand_select_chip(),
which in turn depends on chip->cmd_ctrl() hook being valid. Not
providing both of those functions in NAND controller driver (for example
by mistake) will result in a bit cryptic segfault. Same is true for
chip->cmdfunc().

To avoid the above scenario add a check in nand_scan_dent and error out
if cmd_ctrl() is not provided.
Suggested-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Suggested-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>