Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Reviewed-by: NJulian Calaby <julian.calaby@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>

This is a preparatory patch for moving irq_data struct members.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/1433145945-789-27-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This makes sure that leon_cycles_offset takes the pending bit into
account and that leon_clear_clock_irq clears the pending bit. Otherwise,
if leon_cycles_offset is executed after the timer has wrapped but before
timer_interrupt has increased timer_cs_internal_counter, time can be
perceived to go backwards.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
time_32.c:63:1: warning: symbol 'rtc_lock' was not declared. Should it be static?
time_32.c:357:13: warning: symbol 'time_init' was not declared. Should it be static?
time_32.c:148:16: warning: dereference of noderef expression

Add extern definition of rtc_lock in mc146818rtc.h.
time_init() is called from init/main.c - add prototype to kernel.h.
Use proper u32 __iomem * for master_l10_counter.
Fix all users.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:
leon_kernel.c:40:15: warning: symbol 'leon3_gptimer_idx' was not declared. Should it be static?
leon_kernel.c:68:6: warning: symbol 'leon_eirq_setup' was not declared. Should it be static?
leon_kernel.c:273:13: warning: symbol 'leon_percpu_timer_ce_interrupt' was not declared. Should it be static?

Define symbols as static.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warnings:

sun4m_irq.c:308:6: warning: symbol 'sun4m_nmi' was not declared. Should it be static?
sun4m_irq.c:396:28: warning: incorrect type in assignment (different address spaces)
sun4m_irq.c:396:28:    expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter
sun4d_irq.c:469:28: warning: incorrect type in assignment (different address spaces)
sun4d_irq.c:469:28:    expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter

master_l10_counter is a pointer to __iomem - add annotations.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reduces the need from two timers to one timer.

Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via
tick_periodic it reads the value of the usual timer it can get an wrapped timer
value without timer_cs_internal_counter having been updated leading to the clock
going backwards. This effectively hangs one cpu that gets stuck in
update_wall_time with an offset slightly smaller than 0xffffffffffffffff.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is needed because when scan_of_devices finds the GAISLER_GPTIMER
core that corresponds to the SMP "ticker" timer, the previously set
proper irq flow handler gets overwritten with an incorrect one. This
leads to very flaky timer interrupt handling on some hardware. Proper
updates to handlers can still be done using leon_update_virq_handling.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an irq is being unlinked concurrently with leon_handle_ext_irq,
irq_map[eirq] might be null in leon_handle_ext_irq. Make sure that
this is not dereferenced.
Signed-off-by: NAndreas Larsson <andreas@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function was only used to set of_pdt_build_more to leon_node_init().
But the leon_node_init() was a nop as prom_amba_init was never assigned.

Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Drop unused stuff accumulated over time
- Drop non-leon stuff
- Include almost all of the header unconditionally
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Konrad Eisele <konrad@gaisler.com>

Use sparc_config to hold the last two function pointers.  There was no
point generating dedicated _ops structures only for these.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I ended up renaming set_cpu_int to send_ipi to
be consistent all way around.
send_ipi was moved to the *_smp.c files so
we could call the relevant method direct,
without any _ops indirection.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This eliminated most of the remaining users of btfixup.

There are some complications because of the special cases we
have for sun4d, leon, and some flavors of viking.

It was found that there are no cases where a flush_page_for_dma
method was not hooked up to something, so the "noflush" iommu
methods were removed.

Add some documentation to the viking_sun4d_smp_ops to describe exactly
the hardware bug which causes us to need special TLB flushing on
sun4d.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kernel uses l14 timers as clockevents. l10 timer is used
as clocksource if platform master_l10_counter isn't constantly
zero. The clocksource is continuous, so it's possible to use
high resolution timers. l10 timer is also used as clockevent
on UP configurations.

This realization is for sun4m, sun4d, sun4c, microsparc-IIep
and LEON platforms. The appropriate LEON changes was made by
Konrad Eisele.

In case of sun4m's oneshot mode, profile irq is zeroed in
smp4m_percpu_timer_interrupt(). It is maybe
needless (double, triple etc overflow does nothing).

sun4d is able to have oneshot mode too, but I haven't
any way to test it. So code of its percpu timer handler
is made as much equal to the current code as possible.

The patch is tested on sun4m box in SMP mode by me,
and tested by Konrad on leon in up mode (leon smp
is broken atm - due to other reasons).
Signed-off-by: NTkhai Kirill <tkhai@yandex.ru>
Tested-by: Konrad Eisele <konrad@gaisler.com> [leon up]
[sam: revised patch to provide generic support for leon]
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This struct holds platform specific config and is thus not
limited to irq stuff.
Do not let the name confuse us to think this is irq only.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This has been obsolescent for a while; time for the final push.

In adjacent context, replaced old cpus_* with cpumask_*.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net> (arch/sparc)
Acked-by: Chris Metcalf <cmetcalf@tilera.com> (arch/tile)
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: sparclinux@vger.kernel.org

Building an allyesconfig doesn't reveal a hidden need
for any of these.  Since module.h brings in the whole kitchen
sink, it just needlessly adds 30k+ lines to the cpp burden.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

During converting per-cpu ticker to genirq layer some
IRQ initialization code was removed by commit
2cf95304 ("sparc32,leon:
per-cpu ticker use genirq per-cpu handler").

This patch reintroduces the code at the same place it was
removed from. IRQ12 - IRQ14 will crash on LEON SMP without
this patch because it will run the SUN4M IRQ trap handler.
Reported-by: NJan Andersson <jan@gaisler.com>
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DMA region must be accessible in order for PCI peripheral
drivers to work, the sparc32 has DMA in the normal memory
zone which requires the GRPCI2 to PCI target BARs so that all
kernel low mem (192MB) can be mapped 1:1 to PCI address
space. The GRPCI2 has resizeable target BARs, by default the
first is made 256MB and all other BARs are disabled.

I/O space are always located on 0x1000-0x10000, but accessed
through the GRPCI2 PCI I/O Window memory mapped to virtual
address space.

Configuration space is accessed through the 64KB GRPCI2 PCI
CFG Window using LDA bypassing the MMU.

The GRPCI2 has a single PCI Window for prefetchable and non-
prefetchable address space, it is up to the AHB master
requesting PCI data to determine access type. Memory space
is mapped 1:1.

The GRPCI2 core can be configured in 4 different IRQ modes,
where PCI Interrupt, Error Interrupt and DMA Interrupt are
shared on a single IRQ line or at most 5 IRQs are used. The
GRPCI2 can mask/unmask PCI interrupts, Err and DMA in the control
and check status bits which tells us which IRQ really happended.
The GENIRQ layer is used to unmask/mask each individual IRQ
source by creating virtual IRQs and implementing a IRQ chip.

The optional DMA functionality of the GRPCI2 is not supported
by this patch.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* proper initialization of boot_cpu_id (no hardcoding to 0)
 * use boot_cpu_id index to address into the IRQ controller where
   appropriate

Each CPU has a separate set of IRQ controller registers, this
patch makes sure that the boot-cpu registers are used instead
of CPU0's.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A simple implementation of CPU affinity, the first CPU in
the affinity CPU mask always takes the IRQ.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleaned up leon_init_timers() by removing unnecessary double checking
and one indentation level. Changed LEON_IMASK to LEON_IMASK(cpu).
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The extended IRQ controller gives the LEON 16 more IRQs.

The patch installs a custom handler for the exetended controller
IRQ, where a register is read and the "real" IRQ causing IRQ is
determined.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The LEON interrupt controller has one single mask register for all
IRQs per CPU, even though the genirq layer protects us from accessing
the same IRQ at the same time other IRQs share the same mask register
and may thus interfere. Some other IRQ controllers has a mask register
or similar per IRQ instead which makes spinlocks unncessary.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20

Test status:
sun4c      - not tested
sun4m,pci  - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d      - not tested
leon       - tested on various combinations of leon boards,
             including SMP variants

generic
   Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
   Allocate 64 IRQs - which is enough even for SS2000
   Use a table of irq_bucket to maintain uses IRQs
      irq_bucket is also used to chain several irq's that
      must be called when the same intrrupt is asserted
   Use irq_link to link a interrupt source to the irq
   All plafforms must now supply their own build_device_irq method
   handler_irq rewriten to use generic irq support

floppy
   Read FLOPPY_IRQ from platform device
   Use generic request_irq to register the floppy interrupt
   Rewrote sparc_floppy_irq to use the generic irq support

pcic:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for pcic
   Use pcic_build_device_irq in pci_time_init
   allocate virtual irqs in pcic_fill_irq

sun4c:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for sun4c
   Use sun4c_build_device_irq in sun4c_init_timers

sun4m:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4m_handler_data that allow easy access to necessary
     data in the mask/unmask functions
   Add a helper method to enable profile_timer (used from smp)
   Added sun4m_build_device_irq
   Use sun4m_build_device_irq in sun4m_init_timers

   TODO:
      There is no replacement for smp_rotate that always scheduled
      next CPU as interrupt target upon an interrupt

sun4d:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4d_handler_data that allow easy access to
   necessary data in mask/unmask fuctions
   Rewrote sun4d_handler_irq to use generic irq support

   TODO:
      The original implmentation of enable/disable had:

          if (irq < NR_IRQS)
               return;

      The new implmentation does not distingush between SBUS and cpu
      interrupts.
      I am no sure what is right here. I assume we need to do
      something for the cpu interrupts.

      I have not succeeded booting my sun4d box (with or without this patch)
      and my understanding of this platfrom is limited.
      So I would be a bit suprised if this works.

leon:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for leon
   Use leon_build_device_irq in leon_init_timers
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDaniel Hellstrom <daniel@gaisler.com>
Tested-by: NDaniel Hellstrom <daniel@gaisler.com>
Tested-by: NMarcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sparc_irq_config is used to hold the platform specific irq setup.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The way a LEON is powered down is implemented differently depending
on CHIP type. The AMBA Plug&Play system ID tells revision of GRLIB
and CHIP.

This is for example needed by the GR-LEON4-ITX board and the UT699.

Previously the power down support for LEON was limited to SMP, now
both SMP and UP systems use the instruction.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ability to select Timer Core and Timer instance for system clock
makes it possible for multiple AMP systems to coexist.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Needed for LEON AMP systems where different CPUs are routed to

different IRQ controllers. This patch selects the IRQ Controller
which has been routed to the boot CPU, it is up to the boot loader
to configure the IRQ controller.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For symbols still lacking namespace qualifiers, add an of_pdt_ prefix.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>