- 23 4月, 2008 16 次提交
-
-
由 Bryan Wu 提交于
Simply use "depends on BLACKFIN" (which is technically correct) and just document which machines have the device. Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Mike Frysinger 提交于
i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
Blackfin TWI controller hardware pin should be requested from GPIO port controller Before BF54x, there is no need to do this. But as long as BF54x and BF52x are supported by this generic driver, the missing pin mux operation should be added. Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
- Dynamic alloc the resource of TWI driver data according to board information - TWI register read/write accessor based on dynamic regs_base - Support TWI0/TWI1 for BF54x Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sonic Zhang 提交于
- Create a new mode TWI_I2C_MODE_REPEAT. - No change to smbus operation. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Manuel Lauss 提交于
Driver for I2C interfaces in master mode on SH7760. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Split the handling of the I2C_RDWR and I2C_SMBUS ioctls to their own functions. This limits the stack usage, saves one level of indentation and makes the code more readable. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sean MacLennan 提交于
This patch allows the i2c-ibm_iic driver to be built either as an ocp driver or an of_platform driver. This allows it to run under the powerpc arch but maintains backward compatibility with the ppc arch. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sean MacLennan 提交于
Change the log levels based on feedback from linxppc-dev. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Tested on a blackfin. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
The separation between algorithm and adapter was unsharp at places. This was partly hidden by the fact, that the ISA-driver allowed just one instance and had all private data in static variables. This patch makes neccessary preparations to add a platform driver on top of the algorithm, while still supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be tested except that it builds. Concerning the core struct i2c_algo_pca_data: - A private data field was added, all hardware dependant data may go here. Similar to other algorithms, now a pointer to this data is passed to the adapter's functions. In order to make as less changes as possible to the ISA-driver, it leaves the private data empty and still only uses its static variables. - A "reset_chip" function pointer was added; such a functionality must come from the adapter, not the algorithm. - use a variable "i2c_clock" instead of a function pointer "get_clock", allowing for write access to a default in case a wrong value was supplied. In the algorithm-file: - move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h" - now using per_instance timeout values (i2c_adap->timeout) - error messages specify the device, not only the driver name - restructure initialization to easily support "i2c_add_numbered_adapter" - drop "retries" and "own" (i2c address) as they were unused (The state-machine for I2C-communication was not touched.) In the ISA-driver: - adapt to new algorithm Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Remove trailing whitespaces to make further patches more readable. Also remove an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough). Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The algorithm drivers are helper drivers that are selected automatically as needed. There's no point in listing them in the config menu, it can only confuse users and waste their time. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 22 4月, 2008 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Correct capitalization "IntX" -> "INTx" IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.c IB/ipath: Remove dependency on PCI_MSI || HT_IRQ IB/ipath: Build IBA7220 code unconditionally IB/ipath: Remove reference to dev->class_dev IB/ipath: Fix module parameter description for disable_sma RDMA/nes: Remove unneeded function declarations Fix up conflict in drivers/infiniband/hw/ipath/ipath_verbs.c (by picking the solution from the infiniband branch)
-
由 Roland Dreier 提交于
Match what the PCI specification uses. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
IB/ipath: Remove reference to dev->class_dev Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Paul Bolle 提交于
Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Remove redundant static declarations of functions that are defined before they are used in the source. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (26 commits) mmc: sdio_ops.c should #include "sdio_ops.h" mmc: proper prototypes for mmc_attach_*() mmc: make __mmc_release_bus() static sdhci: improve no card, no reset quirk MMC: OMAP: Do not busy wait for end of command for ever MMC: OMAP: Start new commands from work queue instead of irq MMC: OMAP: Lazy clock shutdown MMC: OMAP: Move failing command abortion to workqueue MMC: OMAP: Use tasklet instead of workqueue for cover switch notification MMC: OMAP: Check the get_cover_state function pointer if not set MMC: OMAP: Using setup_timer instead of init_timer MMC: OMAP: Abort stuck commands MMC: OMAP: General cleanup for MMC multislot support MMC: OMAP: Power functions modified to MMC multislot support MMC: OMAP: Fix timeout calculation for MMC multislot support MMC: OMAP: New release dma and abort xfer functions MMC: OMAP: Add back cover switch support MMC: OMAP: Introduce new multislot structure and change driver to use it MMC: OMAP: Remove cover switch handling to allow adding multislot support MMC: OMAP: Fix the BYTEBLOCK capability removal ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Remove SunOS and Solaris binary support.
-
git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits) DOC: A couple corrections and clarifications in USB doc. Generate a slightly more informative error msg for bad HZ fix typo "is" -> "if" in Makefile ext*: spelling fix prefered -> preferred DOCUMENTATION: Use newer DEFINE_SPINLOCK macro in docs. KEYS: Fix the comment to match the file name in rxrpc-type.h. RAID: remove trailing space from printk line DMA engine: typo fixes Remove unused MAX_NODES_SHIFT MAINTAINERS: Clarify access to OCFS2 development mailing list. V4L: Storage class should be before const qualifier (sn9c102) V4L: Storage class should be before const qualifier sonypi: Storage class should be before const qualifier intel_menlow: Storage class should be before const qualifier DVB: Storage class should be before const qualifier arm: Storage class should be before const qualifier ALSA: Storage class should be before const qualifier acpi: Storage class should be before const qualifier firmware_sample_driver.c: fix coding style MAINTAINERS: Add ati_remote2 driver ... Fixed up trivial conflicts in firmware_sample_driver.c
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block: block: fix blk_register_queue() return value block: fix memory hotplug and bouncing in block layer block: replace remaining __FUNCTION__ occurrences Kconfig: clean up block/Kconfig help descriptions cciss: fix warning oops on rmmod of driver cciss: Fix race between disk-adding code and interrupt handler block: move the padding adjustment to blk_rq_map_sg block: add bio_copy_user_iov support to blk_rq_map_user_iov block: convert bio_copy_user to bio_copy_user_iov loop: manage partitions in disk image cdrom: use kmalloced buffers instead of buffers on stack cdrom: make unregister_cdrom() return void cdrom: use list_head for cdrom_device_info list cdrom: protect cdrom_device_info list by mutex cdrom: cleanup hardcoded error-code cdrom: remove ifdef CONFIG_SYSCTL
-
由 Adrian Bunk 提交于
This patch removes the no longer used export of kmap_atomic_to_page. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
HARD_RESET_NOW() was unused. And one of the few remaining cli() users. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: one little, two little, three little whitespaces, the avc.c saga. SELinux: cleanup on isle selinuxfs.c changing whitespace for fun and profit: policydb.c SELinux: whitespace and formating fixes for hooks.c SELinux: clean up printks SELinux: sidtab.c whitespace, syntax, and static declaraction cleanups SELinux: services.c whitespace, syntax, and static declaraction cleanups SELinux: mls.c whitespace, syntax, and static declaraction cleanups SELinux: hashtab.c whitespace, syntax, and static declaraction cleanups SELinux: ebitmap.c whitespace, syntax, and static declaraction cleanups SELinux: conditional.c whitespace, syntax, and static declaraction cleanups SELinux: avtab.c whitespace, syntax, and static declaraction cleanups SELinux: xfrm.c whitespace, syntax, and static declaraction cleanups SELinux: nlmsgtab.c whitespace, syntax, and static declaraction cleanups SELinux: netnode.c whitespace, syntax, and static declaraction cleanups SELinux: netlink.c whitespace, syntax, and static declaraction cleanups SELinux: netlabel.c whitespace, syntax, and static declaraction cleanups SELinux: netif.c whitespace, syntax, and static declaraction cleanups
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
-
由 Robert P. J. Day 提交于
A couple of corrections and clarifications in USB documentation. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [HWRNG] omap: Minor updates [CRYPTO] kconfig: Ordering cleanup [CRYPTO] all: Clean up init()/fini() [CRYPTO] padlock-aes: Use generic setkey function [CRYPTO] aes: Export generic setkey [CRYPTO] api: Make the crypto subsystem fully modular [CRYPTO] cts: Add CTS mode required for Kerberos AES support [CRYPTO] lrw: Replace all adds to big endians variables with be*_add_cpu [CRYPTO] tcrypt: Change the XTEA test vectors [CRYPTO] tcrypt: Shrink the tcrypt module [CRYPTO] tcrypt: Change the usage of the test vectors [CRYPTO] api: Constify function pointer tables [CRYPTO] aes-x86-32: Remove unused return code [CRYPTO] tcrypt: Shrink speed templates [CRYPTO] tcrypt: Group common speed templates [CRYPTO] sha512: Rename sha512 to sha512_generic [CRYPTO] sha384: Hardware acceleration for s390 [CRYPTO] sha512: Hardware acceleration for s390 [CRYPTO] s390: Generic sha_update and sha_final [CRYPTO] api: Switch to proc_create()
-
由 Linus Torvalds 提交于
Merge branch 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] minor irq handler cleanups drivers/char: minor irq handler cleanups [PPC] minor irq handler cleanups [BLACKFIN] minor irq handler cleanups [SPARC] minor irq handler cleanups ARM minor irq handler cleanup: avoid passing unused info to irq
-
由 Robert P. J. Day 提交于
Generate a slightly more informative error msg for bad HZ in include/linux/jiffies.h Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'isdn-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] Hisax: eliminate many unnecessary references to CardType[] [ISDN] HiSax: modularization prep
-
由 Uwe Kleine-König 提交于
It should be "if" but is written as "is".. Signed-off-by: NUwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 Roland McGrath 提交于
This adds support for PTRACE_GETSIGINFO and PTRACE_SETSIGINFO in compat_ptrace_request. It relies on existing arch definitions for copy_siginfo_to_user32 and copy_siginfo_from_user32. On powerpc, this fixes a longstanding regression of 32-bit ptrace calls on 64-bit kernels vs native calls (64-bit calls or 32-bit kernels). This can be seen in a 32-bit call using PTRACE_GETSIGINFO to examine e.g. siginfo_t.si_addr from a signal that sets it. (This was broken as of 2.6.24 and, I presume, many or all prior versions.) Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-