Some drivers expect to be able to request both as GPIO and GPIO IRQ, so
allow that use case.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Make sure the addresses declared match reality, and make the PATA IRQ code
optional.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

ipipe-2.6.28.9-blackfin-git95aafe6.patch
Singed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The I/O port functions take ints, so we need to cast them up before
passing to our read/write funcs to avoid ugly messes of warnings.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

The traps test case 21 "exception 0x3f: l1_instruction_access" would make
the kernel panic on BF533's because we end up calling show_stack()
infinitely.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Make sure we flush all data caches and their write buffers before flushing
icache, otherwise random edge cases could crop up where stale data is read
into icache from external memory.  As fallout, punt the combined icache +
dcache flush function since we cannot safely do them back to back -- the
SSYNC is needed between the dcache flush and the icache flush.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Move exception stack mess from entry.S to init.c to fix link failure when
CONFIG_EXCEPTION_L1_SCRATCH is in use.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

By default, it is routed to async memory address. In GPIO case,
GPIO peripheral PINs should be requested in advance.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits)
  nilfs2: get rid of bd_mount_sem use from nilfs
  nilfs2: correct exclusion control in nilfs_remount function
  nilfs2: simplify remaining sget() use
  nilfs2: get rid of sget use for checking if current mount is present
  nilfs2: get rid of sget use for acquiring nilfs object
  nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
  remove the call to ->write_super in __sync_filesystem
  nilfs2: call nilfs2_write_super from nilfs2_sync_fs
  jffs2: call jffs2_write_super from jffs2_sync_fs
  ufs: add ->sync_fs
  sysv: add ->sync_fs
  hfsplus: add ->sync_fs
  hfs: add ->sync_fs
  fat: add ->sync_fs
  ext2: add ->sync_fs
  exofs: add ->sync_fs
  bfs: add ->sync_fs
  affs: add ->sync_fs
  sanitize ->fsync() for affs
  repair bfs_write_inode(), switch bfs to simple_fsync()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove unecessary include of thread_info.h in entry.S
  m68knommu: enumerate INIT_THREAD fields properly
  headers_check fix: m68k, swab.h
  arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug(
  m68knommu: remove obsolete reset code
  m68knommu: move CPU reset code for the 5272 ColdFire into its platform code
  m68knommu: move CPU reset code for the 528x ColdFire into its platform code
  m68knommu: move CPU reset code for the 527x ColdFire into its platform code
  m68knommu: move CPU reset code for the 523x ColdFire into its platform code
  m68knommu: move CPU reset code for the 520x ColdFire into its platform code
  m68knommu: add CPU reset code for the 532x ColdFire
  m68knommu: add CPU reset code for the 5249 ColdFire
  m68knommu: add CPU reset code for the 5206e ColdFire
  m68knommu: add CPU reset code for the 5206 ColdFire
  m68knommu: add CPU reset code for the 5407 ColdFire
  m68knommu: add CPU reset code for the 5307 ColdFire
  m68knommu: merge system reset for code ColdFire 523x family
  m68knommu: fix system reset for ColdFire 527x family

zalloc_cpumask_var already cleared it.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So we make sure MAXSMP gets a cleared cpumask
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 925d519a ("perf_counter:
unify and fix delayed counter wakeup") added global definitions.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This will remove every bd_mount_sem use in nilfs.

The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

nilfs_remount() changes mount state of a superblock instance.  Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().

Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:

  1. bdev->bd_mount_sem
  2. sb->s_umount  (sget acquires)

and nilfs_remount() holds:

  1. sb->s_umount  (locked by the caller in vfs)
  2. bdev->bd_mount_sem

To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().

With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved.  And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This simplifies the test function passed on the remaining sget()
callsite in nilfs.

Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device.  This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This will change the way to obtain nilfs object in nilfs_get_sb()
function.

Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.

This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The following EBUSY case in nilfs_get_sb() is meaningless.  Indeed,
this error code is never returned to the caller.

    if (!s->s_root) {
          ...
    } else if (!(s->s_flags & MS_RDONLY)) {
        err = -EBUSY;
    }

This simply removes the else case.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.

This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.  Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership.  So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>