The channel count can be queried to determine which.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Unlike other streams which support 1..max channels,
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

and update HPI version to 4.10
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Elapsed counter should only count data committed to snd_pcm_period_elapsed,
rather than all data available
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These drviers defined only variables but didn't declare as module
parameters.  Also fix the enable variable to bool type.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NSergiusz Urbaniak <sergiusz.urbaniak@googlemail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDavid Dillow <dave@thedillows.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are some AC97 codec and board combinations that have been observed
to take a very long time to respond after the cold reset has completed.
In one case, more than 350 ms was required. To allow users to have sound
on those platforms, we'll wait up to 500ms for the codec to become
ready.

As a board may have multiple codecs, with some faster than others to
reset, we add a module parameter to inform the driver which codecs
should be present.
Reported-by: NKotCzarny <tjosko@yahoo.com>
Signed-off-by: NDavid Dillow <dave@thedillows.org>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The verb command in stac92xx_post_suspend caused the audio to stop
working after resuming from S3 mode on HP laptops with the VREF-pin
mute-LED control.  Removing relevant post_suspend registering.

Although removing D3 on AFG is no optimal solution, the impact should
be small in comparison with the broken S3/S4.
Signed-off-by: NCharles Chin <Charles.Chin@idt.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This quirk sould be reverted. It has the following probems:

1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the
ID used matches a much broader range, potentially all boards containing a
VIA chipset model in the family of vendor VIA 0x1106 and audio device ID
0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets.

2) VIA chipsets rely on azx_via_get_position() to handle correctly dma
transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO
leads to partially corrupted input buffers during capture. The effects
of this bug are not immediately visible, it took strong DSP expertise,
some expensive signal generator and a spectrum analyzer to identify it
and verify correct behaviour using original default.

3) It's almost certain that the quirk did not fix the real problem,
if there was one. Refer to original submission:
http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.htmlSigned-of-by: NMarc Vertes <mvertes@sigfox.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some HP laptops use a pin VREF for controlling the mute LED, and such a
pin shouldn't be powered off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the SigmaDSP firmware loader only works correctly on little-endian
systems. Fix this by using the proper endianess conversion functions.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

The firmware header is not part of the CRC, so skip it. Otherwise the firmware
will be rejected due to non-matching CRCs.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

The SigmaDSP firmware loader currently does not perform enough boundary size
checks when processing the firmware. As a result it is possible that a
malformed firmware can cause an out of bounds memory access.

This patch adds checks which ensure that both the action header and the payload
are completely inside the firmware data boundaries before processing them.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon
Roland SH-201 table entry as template.  USB MIDI and audio was tested
with Muse and Audacity.
Signed-off-by: NJohn F Leach <jfleach@jfleach.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Based on initial data.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch converts the drivers in sound/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VT1708 has no support for unsolicited events per jack-plug, the driver
implements the workq for polling the jack-detection.  The mixer element
"Jack Detect" was supposed to control this behavior on/off, but this
doesn't work properly as is now.  The workq is always started and the
HP automute is always enabled.

This patch fixes the jack-detect control behavior by triggering / stopping
the work appropriately at the state change.  Also the work checks the
internal state to continue scheduling or not.

Cc: <stable@kernel.org> [v3.1]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The CS420X_IMAC27 was copied from the line before but CS420X_APPLE
was clearly intented.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Factor out some boilerplate code.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are cases where there is no working codec on the soc-audio devices,
and snd_soc_suspend() will skip such device when suspending. Yet its
counterpart snd_soc_resume() does not check this, causing complaints
about spinlock lockup:

[  176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8
[  176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24)
[  176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158)
[  176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68)
[  176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c)
[  176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0)
[  176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c)
[  176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0)
[  176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0)
[  176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8)
Signed-off-by: NEric Miao <eric.miao@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Just checking the code in cs42l51_fill_cache():
The cache pointer points to codec->reg_cache + 1.
I think it is because CS42L51_FIRSTREG is 0x01,
so codec->reg_cache[0] is not used here.

Then we read CS42L51_NUMREGS bytes to cache.
So we need reg_cache_size to be CS42L51_NUMREGS + 1.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca968
("[ALSA] Revised AT32 ASoC Patch"). That support depends on
BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got
added in v2.6.27. It still doesn't. It has never been possible to even
build this driver. Drop it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use an inline function for the common pattern for assigning a capsrc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(),
the initialization of index field is missing.  It may work without it
casually when the original imux was created by the auto-parser, but
it's definitely broken in the case of static configs where no imux was
parsed beforehand.  Because of this, the auto-mic switching doesn't
work properly on some model options.

This patch adds the missing initialization of index field.
Reported-by: NDmitry Nezhevenko <dion@inhex.net>
Cc: <stable@kernel.org> [v3.1]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCI SSID 8086:7270 is commonly used for multiple Apple machines,
thus we can't use it as identifier for a unique model.  Because of this
conflict, some machines show weird behavior.  For example, MacBook Air
shows Front and Surround speakers although only Surround works due to
the wrongly overridden pin-configuration for imac27.

This patch fixes two things:
- Stop the wrong pin-config override of imac27 by removing PCI SSID
  entry for avoiding the wrong mappings,
- Add the generic GPIO setup for Apple machines by checking the codec
  SSID vendor bits
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Tested-by: NDirk Hohndel <hohndel@infradead.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In snd_hda_check_board_codec_sid_config(), not only comparing with the
exact value but allow the bit-mask comparison for vendor-only, etc.
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Tested-by: NDirk Hohndel <hohndel@infradead.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is
detected") requires the machine driver to tell the CS4270 codec driver
whether the CS4270 should be configured for master or slave operation.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Replace the manual register restore mechanism in cs4270.c and call the
generic snd_soc_cache_sync() handler instead.

This factors code out in favour of core facilities and also fixes a
bus confusion that is most probably caused by intermixing i2c-regmap
functions and i2c_smbus_* accessors.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-and-tested-by: NSven Neumann <s.neumann@raumfeld.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds <linux/modules.h> to fix following build errors.

sound/soc/codecs/wm8994.c: In function 'wm8994_readable':
sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994'
sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant
sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class
sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype
sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>