Use kmem_cache to allocate/free inet_frag_queue objects since they're
all the same size per inet_frags user and are alloced/freed in high volumes
thus making it a perfect case for kmem_cache.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have INET_FRAG_EVICTED we might as well use it to stop
sending icmp messages in the "frag_expire" functions instead of
stripping INET_FRAG_FIRST_IN from their flags when evicting.
Also fix the comment style in ip6_expire_frag_queue().
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Reviewed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a couple of functions' declaration alignments.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the flags to an enum definion, swap FIRST_IN/LAST_IN to be in increasing
order and add comments explaining each flag and the inet_frag_queue struct
members.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The last_in field has been used to store various flags different from
first/last frag in so give it a more descriptive name: flags.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Softirqs are already disabled so no need to do it again, thus let's be
consistent and use the IP6_INC_STATS_BH variant.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dm9000_release_board() function is called with NULL ->data_req and
->addr_req pointers if dm9000_probe() fails.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_local_deliver_finish() already have a rcu_read_lock/unlock, so
the rcu_read_lock/unlock is unnecessary.

See the stack below:
ip_local_deliver_finish
	|
	|
	->icmp_rcv
		|
		|
		->icmp_socket_deliver
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
net: filter: split sk_filter into socket and bpf, cleanup names

The main goal of the series is to split 'struct sk_filter' into socket and
bpf parts and cleanup names in the following way:
- everything that deals with sockets keeps 'sk_*' prefix
- everything that is pure BPF is changed to 'bpf_*' prefix

split 'struct sk_filter' into
struct sk_filter {
	atomic_t        refcnt;
	struct rcu_head rcu;
	struct bpf_prog *prog;
};
and
struct bpf_prog {
        u32                     jited:1,
                                len:31;
        struct sock_fprog_kern  *orig_prog;
        unsigned int            (*bpf_func)(const struct sk_buff *skb,
                                            const struct bpf_insn *filter);
        union {
                struct sock_filter      insns[0];
                struct bpf_insn         insnsi[0];
                struct work_struct      work;
        };
};
so that 'struct bpf_prog' can be used independent of sockets and cleans up
'unattached' bpf use cases:
isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf
which don't need refcnt/rcu fields.

It's a follow up to the rcu cleanup started by Pablo in
commit 34c5bd66 ("net: filter: don't release unattached filter through call_rcu()")

Patch 1 - cleans up socket memory charging and makes it possible for functions
  sk(bpf)_migrate_filter(), sk(bpf)_prepare_filter() to be socket independent
Patches 2-4 - trivial renames
Patch 5 - sk_filter split and renames of related sk_*() functions
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clean up names related to socket filtering and bpf in the following way:
- everything that deals with sockets keeps 'sk_*' prefix
- everything that is pure BPF is changed to 'bpf_*' prefix

split 'struct sk_filter' into
struct sk_filter {
	atomic_t        refcnt;
	struct rcu_head rcu;
	struct bpf_prog *prog;
};
and
struct bpf_prog {
        u32                     jited:1,
                                len:31;
        struct sock_fprog_kern  *orig_prog;
        unsigned int            (*bpf_func)(const struct sk_buff *skb,
                                            const struct bpf_insn *filter);
        union {
                struct sock_filter      insns[0];
                struct bpf_insn         insnsi[0];
                struct work_struct      work;
        };
};
so that 'struct bpf_prog' can be used independent of sockets and cleans up
'unattached' bpf use cases

split SK_RUN_FILTER macro into:
    SK_RUN_FILTER to be used with 'struct sk_filter *' and
    BPF_PROG_RUN to be used with 'struct bpf_prog *'

__sk_filter_release(struct sk_filter *) gains
__bpf_prog_release(struct bpf_prog *) helper function

also perform related renames for the functions that work
with 'struct bpf_prog *', since they're on the same lines:

sk_filter_size -> bpf_prog_size
sk_filter_select_runtime -> bpf_prog_select_runtime
sk_filter_free -> bpf_prog_free
sk_unattached_filter_create -> bpf_prog_create
sk_unattached_filter_destroy -> bpf_prog_destroy
sk_store_orig_filter -> bpf_prog_store_orig_filter
sk_release_orig_filter -> bpf_release_orig_filter
__sk_migrate_filter -> bpf_migrate_filter
__sk_prepare_filter -> bpf_prepare_filter

API for attaching classic BPF to a socket stays the same:
sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *)
and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program
which is used by sockets, tun, af_packet

API for 'unattached' BPF programs becomes:
bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *)
and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program
which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

to indicate that this function is converting classic BPF into eBPF
and not related to sockets
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial rename to indicate that this functions performs classic BPF checking
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial rename to better match semantics of macro
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

attaching bpf program to a socket involves multiple socket memory arithmetic,
since size of 'sk_filter' is changing when classic BPF is converted to eBPF.
Also common path of program creation has to deal with two ways of freeing
the memory.

Simplify the code by delaying socket charging until program is ready and
its size is known
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) We don't allocate enough space for the NUL terminator so we end up
   corrupting one character beyond the end of the buffer.

2) The "len - 1" should just be "len".  The code is trying to copy a
   word from a buffer up to a comma or the last word in the buffer.
   Say you have the buffer, "foo,bar,baz", then this code truncates the
   last letter off each word so you get "fo", "ba", and "ba".  You would
   hope this kind of bug would get noticed in testing...

   I'm not very familiar with this code and I can't test it, but I think
   we should copy the final character.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add functions to support ethtool EEE manipulating, and the EEE
is disabled in default setting to enhance the compatibility
with certain switch.
Signed-off-by: NFreddy Xin <freddy@asix.com.tw>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use PAGE_ALIGNED(...) instead of IS_ALIGNED(..., PAGE_SIZE).
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dealing with ICMPv[46] Error Message, function icmp_socket_deliver()
and icmpv6_notify() do some valid checks on packet's length, but then some
protocols check packet's length redaudantly. So remove those duplicated
statements, and increase counter ICMP_MIB_INERRORS/ICMP6_MIB_INERRORS in
function icmp_socket_deliver() and icmpv6_notify() respectively.

In addition, add missed counter in udp6/udplite6 when socket is NULL.
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SCTP socket extensions API document describes the v4mapping option as
follows:

8.1.15.  Set/Clear IPv4 Mapped Addresses (SCTP_I_WANT_MAPPED_V4_ADDR)

   This socket option is a Boolean flag which turns on or off the
   mapping of IPv4 addresses.  If this option is turned on, then IPv4
   addresses will be mapped to V6 representation.  If this option is
   turned off, then no mapping will be done of V4 addresses and a user
   will receive both PF_INET6 and PF_INET type addresses on the socket.
   See [RFC3542] for more details on mapped V6 addresses.

This description isn't really in line with what the code does though.

Introduce addr_to_user (renamed addr_v4map), which should be called
before any sockaddr is passed back to user space. The new function
places the sockaddr into the correct format depending on the
SCTP_I_WANT_MAPPED_V4_ADDR option.

Audit all places that touched v4mapped and either sanely construct
a v4 or v6 address then call addr_to_user, or drop the
unnecessary v4mapped check entirely.

Audit all places that call addr_to_user and verify they are on a sycall
return path.

Add a custom getname that formats the address properly.

Several bugs are addressed:
 - SCTP_I_WANT_MAPPED_V4_ADDR=0 often returned garbage for
   addresses to user space
 - The addr_len returned from recvmsg was not correct when
   returning AF_INET on a v6 socket
 - flowlabel and scope_id were not zerod when promoting
   a v4 to v6
 - Some syscalls like bind and connect behaved differently
   depending on v4mapped

Tested bind, getpeername, getsockname, connect, and recvmsg for proper
behaviour in v4mapped = 1 and 0 cases.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Tested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Net_device is a vast and important structure, but it has no kernel-doc
compliant documentation. This patch extracts the comments from the structure
to clean it up, and let the scripts extract documentation from it. I know that
the patch is big, but it's just reordering of comments into the appropriate
form, and adding a few more, for the missing members.
Signed-off-by: NKaroly Kemeny <karoly.kemeny@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vince Bridgers says:

====================
net: stmmac: Improve mcast/ucast filter for snps

This patch series adds Synopsys specific bindings for the Synopsys EMAC
filter characteristics since those are implementation dependent. The
multicast and unicast filtering code was improved to handle different
configuration variations based on device tree settings.

I verified the operation of the multicast and unicast filters through
Synopsys support as requested during the V1 review, and tested the GMAC
configuration on an Altera Cyclone 5 SOC (which supports 256 multicast
bins and 128 Unicast addresses). The 10/100 variant of this driver
modification was not tested, although it was compile tested. I shared
the email thread results of the investigation through Synopsys with the
stmmac maintainer.

V4: Remove patch from series that addressed a sparse issue from a
    down rev'd version of sparse that does not show up in the
    latest version of sparse.
V3: Break up the patch into interface and functional change patches
    per review comments
V2: Confirm with Synopsys methods to determine number of Multicast bins
    and Unicast address filter entries per first round review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds and modifies code to support multiple Multicast and Unicast
Synopsys MAC filter configurations. The default configuration is defined to
support legacy driver behavior, which is 64 Multicast bins. The Unicast
filter code previously assumed all controllers support 32 or 16 Unicast
addresses based on controller version number, but this has been corrected
to support a default of 1 Unicast address. The filter configuration may
be specified through the devicetree using a Synopsys specific device tree
entry. This information was verified with Synopsys through
Synopsys Support Case #8000684337 and shared with the maintainer.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds socfpga Ethernet filter attributes for multicast
and unicast filters per Synopsys Ethernet IP configuration chosen
by Altera for the Cyclone 5 and Arria SOC FPGAs.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change adds bindings for the number of multicast hash bins and perfect
filter entries supported by the Synopsys EMAC. The Synopsys EMAC core is
configurable at device creation time, and can be configured for a different
number of multicast hash bins and a different number of perfect filter
entries. The device does not provide a way to query these parameters,
therefore parameters are required. The Altera Cyclone V SOC has support for
256 multicast hash bins and 128 perfect filter entries, and is different
than what's currently provided in the stmmac driver.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the check for the number of mulitcast addresses
when using hash based filtering since it's not necessary. If the number
of multicast addresses in the list exceeds the number of multicast hash
bins, the bins will "fold" over into one of the bins configured and
enabled for the particular component instance.

The default number of maximum unicast addresses was changed from 32 to 1
since this number is not dependent on the component revision. The maximum
number of multicast and unicast addresses is dependent on the configuration
of the Synopsys EMAC configured by the SOC architect at the time the
features were selected and configured for a particular component. Sadly,
Synopsys does not provide a way to query the precise number supported
by a particular component, so we must fall back on a devicetree entry.
This configuration could vary from vendor to vendor (such as STMicro,
Altera, etc).

The multicast bins are set for every possible filtering case (including
no entries) - previously the bits were set only if multicast filter entries
were present.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The synopsys EMAC can be configured for different numbers of multicast hash
bins and perfect filter entries at device creation time and there's no way
to query this configuration information at runtime. As a result, a devicetree
parameter is required in order for the driver to program these filters
correctly for a particular device instance. This patch modifies the
10/100/1000 MAC software interface such that these configuration parameters
can be set at initialization time.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains netfilter updates for net-next, they are:

1) Add the reject expression for the nf_tables bridge family, this
   allows us to send explicit reject (TCP RST / ICMP dest unrech) to
   the packets matching a rule.

2) Simplify and consolidate the nf_tables set dumping logic. This uses
   netlink control->data to filter out depending on the request.

3) Perform garbage collection in xt_hashlimit using a workqueue instead
   of a timer, which is problematic when many entries are in place in
   the tables, from Eric Dumazet.

4) Remove leftover code from the removed ulog target support, from
   Paul Bolle.

5) Dump unmodified flags in the netfilter packet accounting when resetting
   counters, so userspace knows that a counter was in overquota situation,
   from Alexey Perevalov.

6) Fix wrong usage of the bitwise functions in nfnetlink_acct, also from
   Alexey.

7) Fix a crash when adding new set element with an empty NFTA_SET_ELEM_LIST
   attribute.

This patchset also includes a couple of cleanups for xt_LED from
Duan Jiong and for nf_conntrack_ipv4 (using coccinelle) from
Himangi Saraogi.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit d23ff701 (tcp: add generic netlink support for tcp_metrics) introduced
netlink support for the new tcp_metrics, however it restricted getting of
tcp_metrics to root user only. This is a change from how these values could
have been fetched when in the old route cache. Unless there's a legitimate
reason to restrict the reading of these values it would be better if normal
users could fetch them.

Cc: Julian Anastasov <ja@ssi.bg>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NDebabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 34c5bd66 introduced the possibility that an
uninitialized pointer on the stack (orig_fp) can call into
sk_unattached_filter_destroy() when its value is non NULL.

Before that commit orig_fp was only destroyed in the same
block where it was assigned a valid BPF prog before. Fix it
up by initializing it to NULL.

Fixes: 34c5bd66 ("net: filter: don't release unattached filter through call_rcu()")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Pablo Neira <pablo@netfilter.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise, the kernel oopses in nla_for_each_nested when iterating over
the unset attribute NFTA_SET_ELEM_LIST_ELEMENTS in the
nf_tables_{new,del}setelem() path.

netlink: 65524 bytes leftover after parsing attributes in process `nft'.
[...]
Oops: 0000 [#1] SMP
[...]
CPU: 2 PID: 6287 Comm: nft Not tainted 3.16.0-rc2+ #169
RIP: 0010:[<ffffffffa0526e61>]  [<ffffffffa0526e61>] nf_tables_newsetelem+0x82/0xec [nf_tables]
[...]
Call Trace:
 [<ffffffffa05178c4>] nfnetlink_rcv+0x2e7/0x3d7 [nfnetlink]
 [<ffffffffa0517939>] ? nfnetlink_rcv+0x35c/0x3d7 [nfnetlink]
 [<ffffffff8137d300>] netlink_unicast+0xf8/0x17a
 [<ffffffff8137d6a5>] netlink_sendmsg+0x323/0x351
[...]

Fix this by returning -EINVAL if this attribute is not set, which
doesn't make sense at all since those commands are there to add and to
delete elements from the set.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Bit helper functions were used for manipulation with NFACCT_F_OVERQUOTA,
but they are accepting pit position, but not a bit mask. As a result
not a third bit for NFACCT_F_OVERQUOTA was set, but forth. Such
behaviour was dangarous and could lead to unexpected overquota report
result.
Signed-off-by: NAlexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2014-07-30

This is the last pull request for ipsec-next before I'll be
off for two weeks starting on friday. David, can you please
take urgent ipsec patches directly into net/net-next during
this time?

1) Error handling simplifications for vti and vti6.
   From Mathias Krause.

2) Remove a duplicate semicolon after a return statement.
   From Christoph Paasch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vince Bridgers says:

====================
net: libphy: Add phy specific functions to access mmd regs

This set of patches addresses a problem found with the Micrel ksz9021 phy and
libphy, where the ksz9021 phy does not support mmd extended register access
per the IEEE specification as assumed by libphy. The first patch adds a
framework for phy specific support to specify their own function to access
extended phy registers, return a failure code if not supported, or to default
to libphy's IEEE defined method for accessing the mmd extended phy registers.

This issue was found by using the Synopsys EMAC and a Micrel ksz9021 phy on the
Altera Cyclone 5 SOC development kit. This patch was tested on the same system
in both positive and negative test cases.

V5: Revert name of mmd register access functions, check for phy specific
    driver override functions in mmd register access functions per
    Florian's comments to minimize source code changes
V4: Correct error when formatting V3 patch - erroneous text cut from code
V3: Correct formatting of function arguments, remove return statement from
    NULL functions, and add patch for PHY driver documentation per review
    comments.
V2: Split the original patch submission into seperate patches for the libphy
    framework required for the modification and for the Micrel Phy.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the PHY library documentation to describe how a specific PHY
driver can use the PAL MMD register access routines or override those
routines with it's own in the event the PHY does not support the IEEE
standard for reading and writing MMD phy registers.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Micrel ksz9021 PHY does not support standard IEEE standard MMD
extended register access, therefore requires stubs to fail the read
register method and do nothing for the write register method when
libphy attempts to read and/or configure Energy Efficient Ethernet
features in PHYS that do support those features. This problem
was observed on an Altera Cyclone V SOC development kit that
uses the Synopsys EMAC and the Micrel ksz9021 PHY. This patch
was tested on the same board, and Energy Efficient Ethernet is
now disabled as expected since the Micrel PHY does not support that
feature.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

libphy was originally written assuming all phy devices support clause 45
access extensions to the mmd registers through the indirection registers
located within the first 16 phy registers. This assumption is not true
in all cases, and one specific example is the Micrel ksz9021 10/100/1000
Mbps phy. Using the stmmac driver, accessing the mmd registers to query
and configure energy efficient Ethernet (EEE) features yielded unexpected
behavior.

This patch adds mmd access functions to the phy driver that can be
overriden by the phy specific driver if the phy does not support this
mechanism or uses it's own non-standard access mechanism. By default,
the IEEE Compatible clause 45 access mechanism described in clause 22
is used. With this patch, EEE query/configure functions as expected
using the stmmac and the Micrel ksz9021 phy.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NShruti Kanetkar <Shruti@Freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix one misspelled word reported by codespell.
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: NShruti Kanetkar <Shruti@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>