- 24 2月, 2018 12 次提交
-
-
由 Brijesh Singh 提交于
The SEV LAUNCH_SECRET command fails with error code 'invalid param' because we missed filling the guest and header system physical address while issuing the command. Fixes: 9f5b5b95 (KVM: SVM: Add support for SEV LAUNCH_SECRET command) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-kernel@vger.kernel.org Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Brijesh Singh 提交于
RSM instruction is used by the SMM handler to return from SMM mode. Currently, rsm causes a #UD - which results in instruction fetch, decode, and emulate. By installing the RSM intercept we can avoid the instruction fetch since we know that #VMEXIT was due to rsm. The patch is required for the SEV guest, because in case of SEV guest memory is encrypted with guest-specific key and hypervisor will not able to fetch the instruction bytes from the guest memory. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Brijesh Singh 提交于
Using the access_ok() to validate the input before issuing the SEV command does not buy us anything in this case. If userland is giving us a garbage pointer then copy_to_user() will catch it when we try to return the measurement. Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk> Fixes: 0d0736f7 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-kernel@vger.kernel.org Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Avoid traversing all the cpus for pv tlb flush when steal time is disabled since pv tlb flush depends on the field in steal time for shared data. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmář <rkrcmar@redhat.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Dou Liyang 提交于
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall, So, Make them __init as well. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: rkrcmar@redhat.com Cc: kvm@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: x86@kernel.org Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Radim Krčmář 提交于
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT bit when enabling async_PF, but this bit is reserved on old hypervisors, which results in a failure upon migration. To avoid breaking different cases, we are checking for CPUID feature bit before enabling the feature and nothing else. Fixes: 52a5c155 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode") Cc: <stable@vger.kernel.org> Reviewed-by: NWanpeng Li <wanpengli@tencent.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Sebastian Ott 提交于
Fix the following sparse warning by moving the prototype of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h . CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static? Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Reported by syzkaller: WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel] CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4 RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel] Call Trace: vmx_handle_exit+0xbd/0xe20 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm] kvm_vcpu_ioctl+0x3e9/0x720 [kvm] do_vfs_ioctl+0xa4/0x6a0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x25/0x9c The testcase creates a first thread to issue KVM_SMI ioctl, and then creates a second thread to mmap and operate on the same vCPU. This triggers a race condition when running the testcase with multiple threads. Sometimes one thread exits with a triple fault while another thread mmaps and operates on the same vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE in kvm_handle_bad_page(), which will go on to cause an emulation failure and an exit with KVM_EXIT_INTERNAL_ERROR. Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Chao Gao 提交于
Although L2 is in halt state, it will be in the active state after VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity State. Halting the vcpu here means the event won't be injected to L2 and this decision isn't reported to L1. Thus L0 drops an event that should be injected to L2. Cc: Liran Alon <liran.alon@oracle.com> Reviewed-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NChao Gao <chao.gao@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eric Biggers 提交于
On x86, special KVM memslots such as the TSS region have anonymous memory mappings created on behalf of userspace, and these mappings are removed when the VM is destroyed. It is however possible for removing these mappings via vm_munmap() to fail. This can most easily happen if the thread receives SIGKILL while it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)' in __x86_set_memory_region(). syzkaller was able to hit this, using 'exit()' to send the SIGKILL. Note that while the vm_munmap() failure results in the mapping not being removed immediately, it is not leaked forever but rather will be freed when the process exits. It's not really possible to handle this failure properly, so almost every other caller of vm_munmap() doesn't check the return value. It's a limitation of having the kernel manage these mappings rather than userspace. So just remove the WARN_ON() so that users can't spam the kernel log with this warning. Fixes: f0d648bd ("KVM: x86: map/unmap private slots in __x86_set_memory_region") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Radim Krčmář 提交于
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS bit if UMIP is not being emulated. We must still set the bit when emulating UMIP as the feature can be passed to L2 where L0 will do the emulation and because L2 can change CR4 without a VM exit, we should clear the bit if UMIP is disabled. Fixes: 0367f205 ("KVM: vmx: add support for emulating UMIP") Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Paolo Bonzini 提交于
The initial reset of the local APIC is performed before the VMCS has been created, but it tries to do a vmwrite: vmwrite error: reg 810 value 4a00 (err 18944) CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014 Call Trace: vmx_set_rvi [kvm_intel] vmx_hwapic_irr_update [kvm_intel] kvm_lapic_reset [kvm] kvm_create_lapic [kvm] kvm_arch_vcpu_init [kvm] kvm_vcpu_init [kvm] vmx_create_vcpu [kvm_intel] kvm_vm_ioctl [kvm] Move it later, after the VMCS has been created. Fixes: 4191db26 ("KVM: x86: Update APICv on APIC reset") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 2月, 2018 5 次提交
-
-
由 Samuel Neves 提交于
Without this fix, /proc/cpuinfo will display an incorrect amount of CPU cores, after bringing them offline and online again, as exemplified below: $ cat /proc/cpuinfo | grep cores cpu cores : 4 cpu cores : 8 cpu cores : 8 cpu cores : 20 cpu cores : 4 cpu cores : 3 cpu cores : 2 cpu cores : 2 This patch fixes this by always zeroing the booted_cores variable upon turning off a logical CPU. Tested-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: NSamuel Neves <sneves@dei.uc.pt> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jgross@suse.com Cc: luto@kernel.org Cc: prarit@redhat.com Cc: vkuznets@redhat.com Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.ptSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Wang Hui 提交于
x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system If no monitoring feature is detected because all monitoring features are disabled during boot time or there is no monitoring feature in hardware, creating rdtgroup sub-directory by "mkdir" command reports error: mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory But the sub-directory actually is generated and content is correct: cpus cpus_list schemata tasks The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after the sub-directory is created and the returned value is reported as an error to user. Clear the returned value to report to user that the sub-directory is actually created successfully. Signed-off-by: NWang Hui <john.wanghui@huawei.com> Signed-off-by: NZhang Yanfei <yanfei.zhang@huawei.com> Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vikas <vikas.shivappa@intel.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Thomas Gleixner 提交于
When a irq vector is replaced, then the previous vector is normally released when the first interrupt happens on the new vector. If the target CPU of the previous vector is already offline when the new vector is installed, then the previous vector is silently discarded, which leads to accounting issues causing suspend failures and other problems. Adjust the logic so that the previous vector is freed in the underlying matrix allocator to ensure that the accounting stays correct. Fixes: 69cde000 ("x86/vector: Use matrix allocator for vector assignment") Reported-by: NYuriy Vostrikov <delamonpansie@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NYuriy Vostrikov <delamonpansie@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Daniel Borkmann 提交于
Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 H.J. Lu 提交于
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by: NH.J. Lu <hjl.tools@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2018 1 次提交
-
-
由 Ingo Molnar 提交于
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: NPavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 2月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Sebor <msebor@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 2月, 2018 1 次提交
-
-
由 KarimAllah Ahmed 提交于
... since u64 has a hidden header dependency that was not there before using it (i.e. it breaks our VMM build). Also, __u64 is the right way to expose data types through UAPI. Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: devel@linuxdriverproject.org Fixes: 93286261 ("x86/hyperv: Reenlightenment notifications support") Link: http://lkml.kernel.org/r/1519112391-23773-1-git-send-email-karahmed@amazon.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 17 2月, 2018 1 次提交
-
-
由 Prarit Bhargava 提交于
The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a732 ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Tested-and-reported-by: NSimon Gaiser <simon@invisiblethingslab.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: xen-devel@lists.xenproject.org Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
- 16 2月, 2018 3 次提交
-
-
由 Matthew Whitehead 提交于
The X86_P6_NOP config class leaves out many i686-class CPUs. Instead, explicitly enumerate all these CPUs. Using a configuration with M686 currently sets X86_MINIMUM_CPU_FAMILY=5 instead of the correct value of 6. Booting on an i586 it will fail to generate the "This kernel requires an i686 CPU, but only detected an i586 CPU" message and intentional halt as expected. It will instead just silently hang when it hits i686-specific instructions. Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518713696-11360-3-git-send-email-tedheadster@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Matthew Whitehead 提交于
i586-class machines also lack support for Physical Address Extension (PAE), so add them to the exclusion list. Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518713696-11360-2-git-send-email-tedheadster@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Matthew Whitehead 提交于
Several i586-class CPUs supporting this instruction are missing from the X86_CMPXCHG64 config group. Using a configuration with either M586TSC or M586MMX currently sets X86_MINIMUM_CPU_FAMILY=4 instead of the correct value of 5. Booting on an i486 it will fail to generate the "This kernel requires an i586 CPU, but only detected an i486 CPU" message and intentional halt as expected. It will instead just silently hang when it hits i586-specific instructions. The M586 CPU is not in this list because at least the Cyrix 5x86 lacks this instruction, and perhaps others. Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518713696-11360-1-git-send-email-tedheadster@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 2月, 2018 9 次提交
-
-
由 Ingo Molnar 提交于
Josh Poimboeuf noticed the following bug: "The paranoid exit code only restores the saved CR3 when it switches back to the user GS. However, even in the kernel GS case, it's possible that it needs to restore a user CR3, if for example, the paranoid exception occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and SWAPGS." Josh also confirmed via targeted testing that it's possible to hit this bug. Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch. The reason we haven't seen this bug reported by users yet is probably because "paranoid" entry points are limited to the following cases: idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry machine_check do_mce has_error_code=0 paranoid=1 Amongst those entry points only machine_check is one that will interrupt an IRQS-off critical section asynchronously - and machine check events are rare. The other main asynchronous entries are NMI entries, which can be very high-freq with perf profiling, but they are special: they don't use the 'idtentry' macro but are open coded and restore user CR3 unconditionally so don't have this bug. Reported-and-tested-by: NJosh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Gustavo A. R. Silva 提交于
Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dan Carpenter 提交于
If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: 9005c683 ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwandaSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jia Zhang 提交于
x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: NJia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by: NJoe Konno <joe.konno@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan@linux.intel.com Cc: bp@alien8.de Cc: dan.j.williams@intel.com Cc: dave.hansen@linux.intel.com Cc: dwmw2@infradead.org Cc: dwmw@amazon.co.uk Cc: gregkh@linuxfoundation.org Cc: hpa@zytor.com Cc: jpoimboe@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: luto@kernel.org Fixes: 20ffa1ca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support") Link: http://lkml.kernel.org/r/20180213132819.GJ25201@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dan Williams 提交于
Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Since the Intel SDM added an ModR/M byte to UD0 and binutils followed that specification, we now cannot disassemble our kernel anymore. This now means Intel and AMD disagree on the encoding of UD0. And instead of playing games with additional bytes that are valid ModR/M and single byte instructions (0xd6 for instance), simply use UD2 for both WARN() and BUG(). Requested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180208194406.GD25181@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
By default, objtool assumes that a UD2 is a dead end. This is mainly because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero condition. Now that WARN() is moving back to UD2, annotate the code after it as reachable so objtool can follow the code flow. Reported-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild test robot <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/0e483379275a42626ba8898117f918e1bf661e40.1518130694.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 2月, 2018 7 次提交
-
-
由 Tony Luck 提交于
In the following commit: ce0fa3e5 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") ... we added code to memory_failure() to unmap the page from the kernel 1:1 virtual address space to avoid speculative access to the page logging additional errors. But memory_failure() may not always succeed in taking the page offline, especially if the page belongs to the kernel. This can happen if there are too many corrected errors on a page and either mcelog(8) or drivers/ras/cec.c asks to take a page offline. Since we remove the 1:1 mapping early in memory_failure(), we can end up with the page unmapped, but still in use. On the next access the kernel crashes :-( There are also various debug paths that call memory_failure() to simulate occurrence of an error. Since there is no actual error in memory, we don't need to map out the page for those cases. Revert most of the previous attempt and keep the solution local to arch/x86/kernel/cpu/mcheck/mce.c. Unmap the page only when: 1) there is a real error 2) memory_failure() succeeds. All of this only applies to 64-bit systems. 32-bit kernel doesn't map all of memory into kernel space. It isn't worth adding the code to unmap the piece that is mapped because nobody would run a 32-bit kernel on a machine that has recoverable machine checks. Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert (Persistent Memory) <elliott@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org #v4.14 Fixes: ce0fa3e5 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Arnd Bergmann 提交于
With link time optimizations enabled, I get a link failure: ./ccLbOEHX.ltrans19.ltrans.o: In function `override_function_with_return': <artificial>:(.text+0x7f3): undefined reference to `just_return_func' Marking the symbol .globl makes it work as expected. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 540adea3 ("error-injection: Separate error-injection from kprobe") Link: http://lkml.kernel.org/r/20180202145634.200291-3-arnd@arndb.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 mike.travis@hpe.com 提交于
The latest UV platforms include the new ApachePass NVDIMMs into the UV address space. This has introduced address ranges in the Global Address Map Table that are less than the previous lowest range, which was 2GB. Fix the address calculation so it accommodates address ranges from bytes to exabytes. Signed-off-by: NMike Travis <mike.travis@hpe.com> Reviewed-by: NAndrew Banman <andrew.banman@hpe.com> Reviewed-by: NDimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180205221503.190219903@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Progyan Bhattacharya 提交于
The file was generated by make command and should not be in the source tree. Signed-off-by: NProgyan Bhattacharya <progyanb@acm.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Masayoshi Mizuma 提交于
When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove(): WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988 uncore_pci_remove+0xf1/0x110 ... CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1 Workqueue: kacpi_hotplug acpi_hotplug_work_fn ... Call Trace: pci_device_remove+0x36/0xb0 device_release_driver_internal+0x145/0x210 pci_stop_bus_device+0x76/0xa0 pci_stop_root_bus+0x44/0x60 acpi_pci_root_remove+0x1f/0x80 acpi_bus_trim+0x54/0x90 acpi_bus_trim+0x2e/0x90 acpi_device_hotplug+0x2bc/0x4b0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x141/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130 When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1. arch/x86/events/intel/uncore.c: static void uncore_pci_remove(struct pci_dev *pdev) { ... phys_id = uncore_pcibus_to_physid(pdev->bus); ... pkg = topology_phys_to_logical_pkg(phys_id); // returns -1 for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) { if (uncore_extra_pci_dev[pkg].dev[i] == pdev) { uncore_extra_pci_dev[pkg].dev[i] = NULL; break; } } WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!! topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument. arch/x86/kernel/smpboot.c: int topology_phys_to_logical_pkg(unsigned int phys_pkg) { int cpu; for_each_possible_cpu(cpu) { struct cpuinfo_x86 *c = &cpu_data(cpu); if (c->initialized && c->phys_proc_id == phys_pkg) return c->logical_proc_id; } return -1; } However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined. So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1. As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown. What is worse is that the bogus 'pkg' index results in two bugs: - We dereference uncore_extra_pci_dev[] with a negative index - We fail to clean up a stale pointer in uncore_extra_pci_dev[][] To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo(). This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding. Signed-off-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yasu.isimatu@gmail.com Cc: <stable@vger.kernel.org> Fixes: 30bb9811 ("x86/topology: Avoid wasting 128k for package id array") Link: http://lkml.kernel.org/r/ed738d54-0f01-b38b-b794-c31dc118c207@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 jia zhang 提交于
The vsyscall page should be visible only if vsyscall=emulate/native when dumping /proc/kcore. Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-3-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 jia zhang 提交于
Commit: df04abfd ("fs/proc/kcore.c: Add bounce buffer for ktext data") ... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y. However, accessing the vsyscall user page will cause an SMAP fault. Replace memcpy() with copy_from_user() to fix this bug works, but adding a common way to handle this sort of user page may be useful for future. Currently, only vsyscall page requires KCORE_USER. Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Reviewed-by: NJiri Olsa <jolsa@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-2-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-