- 18 9月, 2009 35 次提交
-
-
由 Florian Fainelli 提交于
This patch makes the board code register the ar7_wdt driver as a platform device. We move the dynamic resource calculation here since the driver should not be aware of the AR7 SoC version it is running on. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Because only gcc >=4.4 have loongson-specific support, we need to choose the suitable -march argument for gcc <= 4.3 and gcc >= 4.4, and here, we use -march=loongson2e for loongson2e. Thanks goes to Arnaud Patard <apatard@mandriva.com> for suggestion of using cc-options(Documentation/kbuild/makefiles.txt). and thanks Zhang Le for introducing the new CPU_LOONGSON2E kernel option. NOTE: -mtune option is not need if -march and -mtune use the same value. Signed-off-by: NZhang Le <r0bertz@gentoo.org> Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The difference between some loongson-based machines is very small, so, if there is no necessary to add new kernel config options to cope with this difference, it will be better to share the same kernel image file between them, benefit from this, the linux distribution developers only have a need to compile the kernel one time. This machtype kernel command line argument will be used later to share the same kernel image file between two different machines(menglong & yeeloong) made by lemote. Thanks very much to Zhang Le for cleaning up the machtype implementation. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
To share common loongson source code between all of the loongson-based machines. there is a need to split it out of the fuloong-2e/ directory. at the same time, other according tuning is needed. the machine-specific parts are defined as macros in relative header file, pci.h, mem.h, machine.h. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
To make source code of loongson sharable to the machines(such as gdium) made by the other companies, we rename arch/mips/lemote to arch/mips/loongson, asm/mach-lemote to asm/mach-loongson, and rename lm2e to the name of the machine: fuloong-2e. accordingly, FULONG are renamed to FULOONG2E to make it distinguishable to the future FULOONG2F. and also, some other relative tuning is needed. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This kernel support is needed by the user-space tool:oprofile to profile linux kernel or applications via loongson2 performance counters. you can enable this driver via CONFIG_OPROFILE = y or m. On Loongson2 there are two performance counters, each one can count 16 events respectively. when anyone of the performance counter overflows, an interrupt will be generated and is routed to the IRQ MIPS_CPU_IRQ_BASE + 6. Signed-off-by: NYanhua <yanh@lemote.com> Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
RTC_LIB is selected by MIPS by default, and therefore, the legacy RTC driver is disabled. but fortunately, RTC_LIB not works on fulong, so, enabling the legcy RTC driver is needed, otherwise, the tools like hwclock will not work. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Fixup the wrong original comment of pcimap, and make the source code more understandable. and also, some new extra consideration is added in. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
With the help of script/checkpatch.pl, i have cleaned up the coding style. 1. remove un-needed header files and tune some comments. 2. remove some un-needed { } add a new header file loongson.h: 3. move some common header files to loongson.h 4. move some common extern declartions to loongson.h and this new header file is needed for future loongson2f support. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch split the old initilization and setup implementation to several file, one file one logic function. the other main changes include: 1. as the script/checkpatch.pl suggests, use strict_strtol instead of simple_strtol in arch/mips/lemote/lm2e/cmdline.c 2. use the existed macros in asm/mips-boards/bonito64.h as the arguments of set_io_port_base() and remove the un-needed ones in asm/mach-lemote/pci.h Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
mips_io_port_base is initialized via set_io_port_base() in arch/mips/lemote/lm2e/setup.c, we can use it directly here. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Several magic numbers have been replaced by relative macros, which will be more readable and understandable. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The implmentation of loongson2e_power_off and loongson2e_halt is almostly the same, just preserve one of them. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch is based on the implementation in the lm2e-fixes branch of Philippe's git://git.linux-cisco.org/linux-mips.git and the malta-specific early_printk implementation. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Since the re-implementation of kgdb by commit 88547001 the platform-specific version has become superfluous, remove it. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Removes the existing implementation of early_printk for fulong. The old implementation was based on the outdated board-specific dbg_io.c. Since commit 8d60a903 dbg_io.c is not longer needed; it will be removed by the next patch, and a new implementation of early_printk will be added later. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Since 2.6.11-rc1 there is a prototype in <linux/smp.h>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Julia Lawall 提交于
Error handling code following a kzalloc should free the allocated data. Error handling code following an ioremap should iounmap the allocated data. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Some TC35815 variants (i.e. TX493[89] internal ether) report existance of PM registers though they are not supported. Disable PM features by clearing pdev->pm_cap. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Nelson Elhage 提交于
page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE and some other constants are defined using "1UL", which the assembler does not support. Use the _AC macro from const.h to make them available to assembly (and linker scripts). Signed-off-by: NNelson Elhage <nelhage@ksplice.com> Signed-off-by: NTim Abbott <tabbott@ksplice.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
Some drivers use gpio_request/gpio_free regardless of whether gpiolib is actually built; add stubs to work around the ensuing compile failures. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Tested-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexey Dobriyan 提交于
Header needed for current_cpu_data which expands to smp_processor_id(). However, linux/smp.h can't be included into asm/cpu-info.h due to horrible circular dependencies, so plug it here. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
The current code only checks CCA of 0 when deciding if a dummy read is needed. Since the kernel can (and does) use other CCAs we need to mask out the CCA bits from the address. Since the address constant now fits in 16 bits, there is an added benefit that smaller code is generated. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Roel Kluin 提交于
If we reach the test just below the loop with a `timeout' value of 0, this does not mean that the timeout caused the loop to end, but rather the `smi_rd.s.pending', in the last iteration. If timeout caused the loop to end, then `timeout' is -1, not 0. Since this can occur only in the last iteration, it is not very likely to be a problem. By changing the post- to prefix decrement we ensure that a timeout of 0 does mean it timed out. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
<asm/delay.h> will break if HZ isn't defined. In 2.6.26 and later we're usually lucky ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (39 commits) xfs: includecheck fix for fs/xfs/xfs_iops.c xfs: switch to seq_file xfs: Record new maintainer information xfs: use correct log reservation when handling ENOSPC in xfs_create xfs: xfs_showargs() reports group *and* project quotas enabled xfs: un-static xfs_inobt_lookup xfs: actually enable the swapext compat handler xfs: simplify xfs_trans_iget xfs: merge fsync and O_SYNC handling xfs: speed up free inode search xfs: rationalize xfs_inobt_lookup* xfs: untangle xfs_dialloc xfs: factor out debug checks from xfs_dialloc and xfs_difree xfs: improve xfs_inobt_update prototype xfs: improve xfs_inobt_get_rec prototype xfs: factor out inode initialisation fs/xfs: Correct redundant test xfs: remove XFS_INO64_OFFSET un-static xfs_read_agf xfs: add more statics & drop some unused functions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (75 commits) Blackfin: update ftrace for latest toolchain Blackfin: fix elf_fpregset_t definition Blackfin: unify cache init functions Blackfin: swap clocksource ratings for gptimer/cycles Blackfin: update ftrace_push_return_trace() breakage Blackfin: update cm board resources Blackfin: cm-bf537u: split board from cm-bf537e Blackfin: bf538-ezkit: add SPI IRQ resources Blackfin: increase default async timings for parallel flashes Blackfin: add ICPLB coverage for async banks Blackfin: use KERN_ALERT in all kgdb_test output Blackfin: fix BF54x SPI CS resources Blackfin: fix typo in isram_write() Blackfin: bf537-stamp: add adp5588 gpio resources Blackfin: add some isram-driver self tests Blackfin: workaround anomaly 05000283 Blackfin: fix spelling in a few comments Blackfin: use raw_smp_processor_id() in exception code Blackfin: remove useless duplicated assignment in gpio code Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits) m68knommu: Make PAGE_SIZE available to assembly files. m68knommu: fix ColdFire definition of CLOCK_TICK_RATE m68knommu: set multi-function pins for ethernet when enabled m68knommu: remove special interrupt handling code for ne2k support m68knommu: relax IO_SPACE_LIMIT setting m68knommu: remove ColdFire direct interrupt register access m68knommu: create a speciailized ColdFire 5272 interrupt controller m68knommu: add support for second interrupt controller of ColdFire 5249 m68knommu: clean up old ColdFire timer irq setup m68knommu: map ColdFire interrupts to correct masking bits m68knommu: clean up ColdFire 532x CPU timer setup m68knommu: simplify ColdFire "timers" clock initialization m68knommu: support code to mask external interrupts on old ColdFire CPU's m68knommu: merge old ColdFire interrupt controller masking macros m68knommu: remove duplicate ColdFire mcf_autovector() code m68knommu: move ColdFire INTC definitions to new include file m68knommu: mask off all interrupts in ColdFire intc-simr controller m68knommu: remove timer device interrupt setup for ColdFire 532x m68knommu: remove interrupt masking from ColdFire pit timer m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm85) Don't bind to Winbond/Nuvoton WPCD377I hwmon: (pcf8591) Documentation clean-ups hwmon: Clearly mark ACPI drivers as such hwmon: Use resource_size hwmon: Include <linux/io.h> instead of <asm/io.h> hwmon: (tmp421) Add documentation hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processors hwmon: (asus_atk0110) Add maintainer information hwmon: (abituguru3) Support multiple DMI strings per chip ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: avoid radio controller reset loops uwb: stop uwbd thread if rc->start() fails uwb: handle radio controller events with out-of-range IDs correctly
-
- 17 9月, 2009 5 次提交
-
-
由 Yi Li 提交于
The mcount support that was finally added to the Blackfin gcc port isn't exactly the same as what ftrace was developed against. Now that the final gcc version is in place, update the ftrace code to match. While updating this, fix the swapped arguments to the tracer (signature is (ip, parent_ip) while we were passing (parent_ip, ip)). Signed-off-by: NYi Li <yi.li@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The elf_fpregset_t type relied on an empty struct in the asm/user.h, but the transition to asm-generic/user.h dropped that empty struct. Rather than restore this useless struct, define the only user (elf_fpregset_t) as an empty struct itself. This fixes building when ELF dump support is enabled. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit code. Even the i/d cache functions are largely the same. So unify them both in the common kernel cache code. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Graf Yang 提交于
The cycles clocksource is a higher resolution than the gptimer one, so make sure the ratings field reflects this. Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Commit 71e308a2 updated ftrace_push_return_trace() prototype but didn't update the Blackfin ftrace code, so things broke. Since we don't support the new stuff yet, call it with stub values. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-