- 05 3月, 2012 1 次提交
-
-
由 Doug Ledford 提交于
We allocate the login dma buffers in iser_verbs.c as part of alloc_ib_conn_resources(), however we are freeing them in iser_initiator.c as part of iser_free_rx_descriptors(). This is needlessly confusing. We have an alloc_rx_descriptors() and it doesn't alloc something that the free_rx_descriptors() frees, and we have an alloc_ib_conn_resources() that allocs something not freed by free_ib_conn_resources(). Clean that up. Signed-off-by: NDoug Ledford <dledford@redhat.com> [ Fix build error in iser_free_ib_conn_res(). - Or ] Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 09 2月, 2012 1 次提交
-
-
由 Roland Dreier 提交于
Commit a0417fa3 ("net: Make qdisc_skb_cb upper size bound explicit.") made it possible for a netdev driver to use skb->cb between its header_ops.create method and its .ndo_start_xmit method. Use this in ipoib_hard_header() to stash away the LL address (GID + QPN), instead of the "ipoib_pseudoheader" hack. This allows IPoIB to stop lying about its hard_header_len, which will let us fix the L2 check for GRO. Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2012 1 次提交
-
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Dan Carpenter 提交于
transport_init_session() and target_fabric_configfs_init() don't return NULL pointers, they only return ERR_PTRs or valid pointers. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 03 2月, 2012 3 次提交
-
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 04 1月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 12月, 2011 1 次提交
-
-
由 Bart Van Assche 提交于
This patch adds the kernel module ib_srpt SCSI RDMA Protocol (SRP) target implementation conforming to the SRP r16a specification for the mainline drivers/target infrastructure. This driver was originally developed by Vu Pham and has been optimized by Bart Van Assche and merged into upstream LIO based on his srpt-lio-4.1 branch here: https://github.com/bvanassche/srpt-lio/commits/srpt-lio-4.1/ This updated patch also contains the following two changes from lio-core-2.6.git/master. One is to fix a bug with 1 >= task->task_sg[] chained mappings in ib_srpt, and the other to convert the configfs control plane to reference IB Port GUID and struct srpt_port directly following mainline v4.x target_core_fabric_configfs.c convertion for ib_srpt to work with rtslib/rtsadmin v2 code. These seperate patches can be found here: ib_srpt: Fix bug with chainged SGLs in srpt_map_sg_to_ib_sge http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=ea485147563b6555a97dbf811825fbb586519252 ib_srpt: Convert se_wwn endpoint reference to struct srpt_port->port_wwn http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=4e544a210acb227df1bb4ca5086e65bdf4e648ea This also includes the following recent v1 -> v2 review changes: ib_srpt: Fix potential out-of-bounds array access ib_srpt: Avoid failed multipart RDMA transfers ib_srpt: Fix srpt_alloc_fabric_acl failure case return value ib_srpt: Update comments to reference $driver/$port layout ib_srpt: Fix sport->port_guid formatting code ib_srpt: Remove legacy use_port_guid_in_session_name module parameter ib_srpt: Convert srp_max_rdma_size into per port configfs attribute ib_srpt: Convert srp_max_rsp_size into per port configfs attribute ib_srpt: Convert srpt_sq_size into per port configfs attribute and v2 -> v3 review changes: ib_srpt: Fix possible race with srp_sq_size in srpt_create_ch_ib ib_srpt: Fix possible race with srp_max_rsp_size in srpt_release_channel_work ib_srpt: Fix up MAX_SRPT_RDMA_SIZE define ib_srpt: Make srpt_map_sg_to_ib_sge() failure case return -EAGAIN ib_srpt: Convert port_guid to use subnet_prefix + interface_id formatting ib_srpt: Make srpt_check_stop_free return kref_put status ib_srpt: Make compilation with BUG=n proceed` ib_srpt: Use new target_core_fabric.h include ib_srpt: Check hex2bin() return code to silence build warning Cc: Bart Van Assche <bvanassche@acm.org> Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Vu Pham <vu@mellanox.com> Cc: David Dillow <dillowda@ornl.gov> Signed-off-by: NNicholas A. Bellinger <nab@risingtidesystems.com>
-
- 06 12月, 2011 2 次提交
-
-
由 David Miller 提交于
Reduce the number of dst_get_neighbour_noref() calls within a single call chain. Primarily by passing the neighbour pointer down to the helper functions. Handle dst_get_neighbour_noref() returning NULL in ipoib_start_xmit() by incrementing the dropped counter and freeing the packet. We don't want it to fall through into the ARP/RARP/multicast handling, since that should only happen when skb_dst() is NULL. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NRoland Dreier <roland@purestorage.com>
-
由 David Miller 提交于
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NRoland Dreier <roland@purestorage.com>
-
- 01 12月, 2011 1 次提交
-
-
由 David Miller 提交于
netdev->neigh_priv_len records the private area length. This will trigger for neigh_table objects which set tbl->entry_size to zero, and the first instances of this will be forthcoming. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2011 2 次提交
-
-
由 Eric Dumazet 提交于
Commit f2c31e32 ("net: fix NULL dereferences in check_peer_redir()") forgot to take care of infiniband uses of dst neighbours. Many thanks to Marc Aurele who provided a nice bug report and feedback. Reported-by: NMarc Aurele La France <tsi@ualberta.ca> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Mike Marciniszyn 提交于
This following can occur with ipoib when processing a multicast reponse: BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982] Modules linked in: ... CPU 0: Modules linked in: ... Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5 RIP: 0010:[<ffffffff814ddb27>] [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20 RSP: 0018:ffff8802119ed860 EFLAGS: 00000246 0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299 RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000 R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860 R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib] [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20 [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib] [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib] [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0 [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0 [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0 [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib] [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib] [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa] [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad] [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core] [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa] [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa] [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa] [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad] [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad] [<ffffffff81088830>] ? worker_thread+0x170/0x2a0 [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0 [<ffffffff8108ddf6>] ? kthread+0x96/0xa0 [<ffffffff8100c1ca>] ? child_rip+0xa/0x20 Coinciding with stack trace is the following message: ib0: ib_address_create failed The code below in ipoib_mcast_join_finish() will note the above failure in the address handle but otherwise continue: ah = ipoib_create_ah(dev, priv->pd, &av); if (!ah) { ipoib_warn(priv, "ib_address_create failed\n"); } else { The while loop at the bottom of ipoib_mcast_join_finish() will attempt to send queued multicast packets in mcast->pkt_queue and eventually end up in ipoib_mcast_send(): if (!mcast->ah) { if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE) skb_queue_tail(&mcast->pkt_queue, skb); else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } My read is that the code will requeue the packet and return to the ipoib_mcast_join_finish() while loop and the stage is set for the "hung" task diagnostic as the while loop never sees a non-NULL ah, and will do nothing to resolve. There are GFP_ATOMIC allocates in the provider routines, so this is possible and should be dealt with. The test that induced the failure is associated with a host SM on the same server during a shutdown. This patch causes ipoib_mcast_join_finish() to exit with an error which will flush the queued mcast packets. Nothing is done to unwind the QP attached state so that subsequent sends from above will retry the join. Reviewed-by: NRam Vepa <ram.vepa@qlogic.com> Reviewed-by: NGary Leshner <gary.leshner@qlogic.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 17 11月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2011 2 次提交
-
-
由 Or Gerlitz 提交于
The current driver never does DMA unmapping on these buffers. Fix that by adding DMA unmapping to the task cleanup callback, and DMA mapping to the task init function (drop the headers_initialized micro-optimization). Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Or Gerlitz 提交于
The driver counted on the transactional nature of iSCSI login/text flows and used the same buffer for both the request and the response. We also went further and did DMA mapping only once, with DMA_FROM_DEVICE, which violates the DMA mapping API. Fix that by using different buffers, one for requests and one for responses, and use the correct DMA mapping direction for each. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 01 11月, 2011 3 次提交
-
-
由 Paul Gortmaker 提交于
These files were getting the moduleparam infrastructure from the implicit presence of module.h being everywhere, but that is going away soon. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
These were getting it implicitly via device.h --> module.h but we are going to stop that when we clean up the headers. Fix these in advance so the tree remains biscect-clean. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
They had been getting it implicitly via device.h but we can't rely on that for the future, due to a pending cleanup so fix it now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 19 10月, 2011 2 次提交
-
-
由 Eric Dumazet 提交于
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dotan Barak 提交于
Pages that were mapped using ib_dma_map_page() should be unmapped using ib_dma_unmap_page(). Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 14 10月, 2011 1 次提交
-
-
由 Sean Hefty 提交于
Currently, there is only a single ("basic") type of SRQ, but with XRC support we will add a second. Prepare for this by defining an SRQ type and setting all current users to IB_SRQT_BASIC. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 12 10月, 2011 1 次提交
-
-
由 Marcel Apfelbaum 提交于
Use new function ib_rate_to_mbps() to handle printing rate in debugfs, so that we handle extended rates. Signed-off-by: NMarcel Apfelbaum <marcela@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 27 8月, 2011 4 次提交
-
-
由 Mike Christie 提交于
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Mike Christie 提交于
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Mike Christie 提交于
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 3 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
RFC3270 mandates that iSCSI PDUs are padded to the closest integer number of four byte words. Fix the iser code to support that on both the TX/RX flows. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Or Gerlitz 提交于
The code that prepares the SG associated with SCSI command for FMR was buggy for systems with DMA addresses that don't fit in unsigned long, e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8. Fix that by casting to unsigned long long a masking constant used by the code. This resolves a crash in iser_sg_to_page_vec on this system. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 17 8月, 2011 1 次提交
-
-
由 Bernd Schubert 提交于
Fix a bug introduced in 69cce1d1 ("net: Abstract dst->neighbour accesses behind helpers.") where we might dereference skb_dst(skb) even if it is NULL, which causes: [ 240.944030] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 240.948007] IP: [<ffffffffa0366ce9>] ipoib_start_xmit+0x39/0x280 [ib_ipoib] [...] [ 240.948007] Call Trace: [ 240.948007] <IRQ> [ 240.948007] [<ffffffff812cd5e0>] dev_hard_start_xmit+0x2a0/0x590 [ 240.948007] [<ffffffff8131f680>] ? arp_create+0x70/0x200 [ 240.948007] [<ffffffff812e8e1f>] sch_direct_xmit+0xef/0x1c0 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=41212Signed-off-by: NBernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 7月, 2011 1 次提交
-
-
由 Nicholas Bellinger 提交于
This patch renames the following iscsi_proto.h structures to avoid namespace issues with drivers/target/iscsi/iscsi_target_core.h: *) struct iscsi_cmd -> struct iscsi_scsi_req *) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp *) struct iscsi_login -> struct iscsi_login_req This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*, and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and fixes the incorrect definition of struct iscsi_snack to following RFC-3720 Section 10.16. SNACK Request. Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to use the updated structure definitions in a handful of locations. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
-
- 18 7月, 2011 1 次提交
-
-
由 David S. Miller 提交于
dst_{get,set}_neighbour() Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2011 1 次提交
-
-
由 Bart Van Assche 提交于
SCSI scanning of a channel:id:lun triplet in Linux works as follows (function scsi_scan_target() in drivers/scsi/scsi_scan.c): - If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target and process the result. - If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN corresponding to the specified channel:id:lun triplet to verify whether the LUN exists. So a SCSI driver must either take the channel and target id values in account in its quecommand() function or it should declare that it only supports one channel and one target id. Currently the ib_srp driver does neither. As a result scanning the SCSI bus via e.g. rescan-scsi-bus.sh causes many duplicate SCSI devices to be created. For each 0:0:L device, several duplicates are created with the same LUN number and with (C:I) != (0:0). Fix this by declaring that the ib_srp driver only supports one channel and one target id. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Cc: <stable@kernel.org> Acked-by: NDavid Dillow <dillowda@ornl.gov> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2011 1 次提交
-
-
由 Sean Hefty 提交于
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 24 5月, 2011 1 次提交
-
-
由 Roland Dreier 提交于
Fix drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_handle_recv': drivers/infiniband/ulp/srp/ib_srp.c:1150: warning: cast to pointer from integer of different size drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_send_completion': drivers/infiniband/ulp/srp/ib_srp.c:1234: warning: cast to pointer from integer of different size by adding an intermediate cast to uintptr_t. Signed-off-by: NRoland Dreier <roland@purestorage.com> Acked-by: NDavid Dillow <dillowda@ornl.gov>
-
- 20 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-