Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 19 1月, 2018 2 次提交
  3. 15 1月, 2018 1 次提交
    • J
      bpf: offload: add map offload infrastructure · a3884572
      由 Jakub Kicinski 提交于 
      BPF map offload follow similar path to program offload.  At creation
time users may specify ifindex of the device on which they want to
create the map.  Map will be validated by the kernel's
.map_alloc_check callback and device driver will be called for the
actual allocation.  Map will have an empty set of operations
associated with it (save for alloc and free callbacks).  The real
device callbacks are kept in map->offload->dev_ops because they
have slightly different signatures.  Map operations are called in
process context so the driver may communicate with HW freely,
msleep(), wait() etc.

Map alloc and free callbacks are muxed via existing .ndo_bpf, and
are always called with rtnl lock held.  Maps and programs are
guaranteed to be destroyed before .ndo_uninit (i.e. before
unregister_netdev() returns).  Map callbacks are invoked with
bpf_devs_lock *read* locked, drivers must take care of exclusive
locking if necessary.

All offload-specific branches are marked with unlikely() (through
bpf_map_is_dev_bound()), given that branch penalty will be
negligible compared to IO anyway, and we don't want to penalize
SW path unnecessarily.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      a3884572
  5. 31 12月, 2017 1 次提交
  7. 18 12月, 2017 1 次提交
    • A
      libbpf: add support for bpf_call · 48cca7e4
      由 Alexei Starovoitov 提交于 
      - recognize relocation emitted by llvm
- since all regular function will be kept in .text section and llvm
  takes care of pc-relative offsets in bpf_call instruction
  simply copy all of .text to relevant program section while adjusting
  bpf_call instructions in program section to point to newly copied
  body of instructions from .text
- do so for all programs in the elf file
- set all programs types to the one passed to bpf_prog_load()

Note for elf files with multiple programs that use different
functions in .text section we need to do 'linker' style logic.
This work is still TBD
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      48cca7e4
  9. 15 12月, 2017 1 次提交
    • I
      tools/headers: Synchronize kernel <-> tooling headers · 643e345c
      由 Ingo Molnar 提交于 
      Two kernel headers got modified recently, which are used by tooling as well:

 tools/include/uapi/linux/kvm.h
 arch/x86/include/asm/cpufeatures.h

None of those changes have an effect on tooling, so do a plain copy.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      643e345c
  11. 13 12月, 2017 2 次提交
  13. 05 12月, 2017 1 次提交
  15. 29 11月, 2017 4 次提交
  17. 21 11月, 2017 2 次提交
  19. 11 11月, 2017 2 次提交
  21. 05 11月, 2017 2 次提交
  23. 04 11月, 2017 1 次提交
    • I
      tools/headers: Synchronize kernel ABI headers · fb7df12d
      由 Ingo Molnar 提交于 
      After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.

Sync them:

 - tools/arch/x86/include/asm/disabled-features.h,
   tools/arch/x86/include/asm/required-features.h,
   tools/include/linux/hash.h:

     Remove the SPDX tag where the kernel version does not have it.

 - tools/include/asm-generic/bitops/__fls.h,
   tools/include/asm-generic/bitops/arch_hweight.h,
   tools/include/asm-generic/bitops/const_hweight.h,
   tools/include/asm-generic/bitops/fls.h,
   tools/include/asm-generic/bitops/fls64.h,
   tools/include/uapi/asm-generic/ioctls.h,
   tools/include/uapi/asm-generic/mman-common.h,
   tools/include/uapi/sound/asound.h,
   tools/include/uapi/linux/kvm.h,
   tools/include/uapi/linux/perf_event.h,
   tools/include/uapi/linux/sched.h,
   tools/include/uapi/linux/vhost.h,
   tools/include/uapi/sound/asound.h:

     Add the SPDX tag of the respective kernel header.

 - tools/include/uapi/linux/bpf_common.h,
   tools/include/uapi/linux/fcntl.h,
   tools/include/uapi/linux/hw_breakpoint.h,
   tools/include/uapi/linux/mman.h,
   tools/include/uapi/linux/stat.h,

     Change the tag to the kernel header version:

       -/* SPDX-License-Identifier: GPL-2.0 */
       +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */

Also sync other header details:

 - include/uapi/sound/asound.h:

     Fix pointless end of line whitespace noise the header grew in this cycle.

 - tools/arch/x86/lib/memcpy_64.S:

     Sync the code and add tools/include/asm/export.h with dummy wrappers
     to support building the kernel side code in a tooling header environment.

 - tools/include/uapi/asm-generic/mman.h,
   tools/include/uapi/linux/bpf.h:

     Sync other details that don't impact tooling's use of the ABIs.
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      fb7df12d
  25. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  27. 01 11月, 2017 2 次提交
  29. 29 10月, 2017 1 次提交
  31. 27 10月, 2017 1 次提交
  33. 23 10月, 2017 1 次提交
    • A
      selftests/bpf: fix broken build of test_maps · e27afb84
      由 Alexei Starovoitov 提交于 
      fix multiple build errors and warnings

1.
test_maps.c: In function ‘test_map_rdonly’:
test_maps.c:1051:30: error: ‘BPF_F_RDONLY’ undeclared (first use in this function)
        MAP_SIZE, map_flags | BPF_F_RDONLY);

2.
test_maps.c:1048:6: warning: unused variable ‘i’ [-Wunused-variable]
  int i, fd, key = 0, value = 0;

3.
test_maps.c:1087:2: error: called object is not a function or function pointer
  assert(bpf_map_lookup_elem(fd, &key, &value) == -1 && errno == EPERM);

4.
./bpf_helpers.h:72:11: error: use of undeclared identifier 'BPF_FUNC_getsockopt'
        (void *) BPF_FUNC_getsockopt;

Fixes: e043325b ("bpf: Add tests for eBPF file mode")
Fixes: 6e71b04a ("bpf: Add file mode configuration into bpf maps")
Fixes: cd86d1fd ("bpf: Adding helper function bpf_getsockops")
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e27afb84
  35. 20 10月, 2017 1 次提交
  37. 18 10月, 2017 1 次提交
    • J
      bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP · 6710e112
      由 Jesper Dangaard Brouer 提交于 
      The 'cpumap' is primarily used as a backend map for XDP BPF helper
call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'.

This patch implement the main part of the map.  It is not connected to
the XDP redirect system yet, and no SKB allocation are done yet.

The main concern in this patch is to ensure the datapath can run
without any locking.  This adds complexity to the setup and tear-down
procedure, which assumptions are extra carefully documented in the
code comments.

V2:
 - make sure array isn't larger than NR_CPUS
 - make sure CPUs added is a valid possible CPU

V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl>

V5:
 - Restrict map allocation to root / CAP_SYS_ADMIN
 - WARN_ON_ONCE if queue is not empty on tear-down
 - Return -EPERM on memlock limit instead of -ENOMEM
 - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup()
 - Moved cpu_map_enqueue() to next patch

V6: all notice by Daniel Borkmann
 - Fix err return code in cpu_map_alloc() introduced in V5
 - Move cpu_possible() check after max_entries boundary check
 - Forbid usage initially in check_map_func_compatibility()

V7:
 - Fix alloc error path spotted by Daniel Borkmann
 - Did stress test adding+removing CPUs from the map concurrently
 - Fixed refcnt issue on cpu_map_entry, kthread started too soon
 - Make sure packets are flushed during tear-down, involved use of
   rcu_barrier() and kthread_run only exit after queue is empty
 - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring

V8:
 - Nitpicking comments and gramma by Edward Cree
 - Fix missing semi-colon introduced in V7 due to rebasing
 - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6710e112
  39. 10 10月, 2017 1 次提交
  41. 08 10月, 2017 3 次提交
  43. 05 10月, 2017 1 次提交
  45. 29 9月, 2017 1 次提交
    • M
      bpf: libbpf: Provide basic API support to specify BPF obj name · 88cda1c9
      由 Martin KaFai Lau 提交于 
      This patch extends the libbpf to provide API support to
allow specifying BPF object name.

In tools/lib/bpf/libbpf, the C symbol of the function
and the map is used.  Regarding section name, all maps are
under the same section named "maps".  Hence, section name
is not a good choice for map's name.  To be consistent with
map, bpf_prog also follows and uses its function symbol as
the prog's name.

This patch adds logic to collect function's symbols in libbpf.
There is existing codes to collect the map's symbols and no change
is needed.

The bpf_load_program_name() and bpf_map_create_name() are
added to take the name argument.  For the other bpf_map_create_xxx()
variants, a name argument is directly added to them.

In samples/bpf, bpf_load.c in particular, the symbol is also
used as the map's name and the map symbols has already been
collected in the existing code.  For bpf_prog, bpf_load.c does
not collect the function symbol name.  We can consider to collect
them later if there is a need to continue supporting the bpf_load.c.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      88cda1c9
  47. 27 9月, 2017 1 次提交
  49. 25 9月, 2017 1 次提交
    • I
      tools include: Sync kernel ABI headers with tooling headers · 549a3976
      由 Ingo Molnar 提交于 
      Time for a sync with ABI/uapi headers with the upcoming v4.14 kernel.

None of the ABI changes require any source code level changes to our
existing in-kernel tooling code:

  - tools/arch/s390/include/uapi/asm/kvm.h:

      New KVM_S390_VM_TOD_EXT ABI, not used by in-kernel tooling.

  - tools/arch/x86/include/asm/cpufeatures.h:
    tools/arch/x86/include/asm/disabled-features.h:

      New PCID, SME and VGIF x86 CPU feature bits defined.

  - tools/include/asm-generic/hugetlb_encode.h:
    tools/include/uapi/asm-generic/mman-common.h:
    tools/include/uapi/linux/mman.h:

      Two new madvise() flags, plus a hugetlb system call mmap flags
      restructuring/extension changes.

  - tools/include/uapi/drm/drm.h:
    tools/include/uapi/drm/i915_drm.h:

      New drm_syncobj_create flags definitions, new drm_syncobj_wait
      and drm_syncobj_array ABIs. DRM_I915_PERF_* calls and a new
      I915_PARAM_HAS_EXEC_FENCE_ARRAY ABI for the Intel driver.

  - tools/include/uapi/linux/bpf.h:

      New bpf_sock fields (::mark and ::priority), new XDP_REDIRECT
      action, new kvm_ppc_smmu_info fields (::data_keys, instr_keys)
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913073823.lxmi4c7ejqlfabjx@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      549a3976
  51. 02 9月, 2017 1 次提交
  53. 29 8月, 2017 1 次提交
  55. 22 8月, 2017 1 次提交
  57. 20 8月, 2017 1 次提交