Removed unnecessary variable in GetSupportedWirelessMode8185() and
shortened its code
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed typo in rtl8180_interrupt() and added missing line
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed empty functions, their calls and 'do {} while (0)' loop
condition
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed rtl8225_rf_set_chan() and corresponding arrays, changed its
usage to rtl8225z2_rf_set_chan()
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed stale functions that are never called
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds two new products and modifies
the device id table to include them. In addition,
product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is
removed because Beceem, ZTE, Sprint use this id
for block devices.
Reported-by: NMuhammad Minhazul Haque <mdminhazulhaque@gmail.com>
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch provides the kernel driver for high-speed TTY
communication over the IEEE 1394 bus.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Acked-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the interrupt service routine, check the device is asserting the
shared interrupt line and check that interrupts have been enabled.

When attaching the device, disable interrupts before setting up the
interrupt handler to avoid handling spurious interrupts before the
device is ready.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable 'p' is initialized but never used otherwise, so
remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed few error and warning messages as reported by checkpatch.pl
Signed-off-by: NKumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit: 0fcdafb8
staging: comedi: addi-data: cleanup reading of the PCI bars

Changed this test before reading the PCI bars:

	if ((this_board->pc_EepromChip == NULL)
		|| (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {

to this:

	if (!this_board->pc_EepromChip ||
	    !strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {

I just noticed that the strcmp test is wrong.

This fixes the test and adds a comment for it.

This error "broke" the addi-data drivers but they are broken anyway
since they don't follow the comedi core API.

The addi_apci_1032 driver has been converted to follow the comedi core
API. This error effects that driver since the iobase for it should be
found in PCI bar 1 not 2. This fixes that also.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the remaining addi-data drivers so they attach using the generic
'auto_attach' method instead the pci specific 'attach_pci' method. The
'attach_pci' is deprecated and is going to be removed.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the addi-data drivers that use the "common" code so they
attach using the generic 'auto_attach' method instead the pci
specific 'attach_pci' method. The 'attach_pci' is deprecated and
is going to be removed.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects.

The 'insn_read' and 'insn_Write' functions for the digital input subdevice
cannot be removed yet. This driver is again abusing the API and uses these
functions to initialize the board and start/stop "events" generated by the
board. These will be addressed later.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function uses the data[0] parameter to determine
if a single channel or all thei nput channels are being read. The status
is then being returned in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi_apci_3200 and addi_apci_3300 board share the same low-level
hardware code. Merge the drivers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function is returning the status in data[0]. It
is also unnecessarily testing the size of the return buffer.

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels. This allows removing the i_APCI3XXX_InsnReadDigitalInput()
function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single output channel or all the channels and the 'insn_bits' function to
read the state of either a single channel or all the channels.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this driver uses the data[0] value passed to the function
to determine if a single input channel status is requested or the status of
all the input channels.

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is the digital output subdevice 'insn_config' operation.
It does not follow the comedi API and the digital output channels on
this board are not configurable. Just remove this broken function.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch error.
- ERROR: spaces required around that '=' (ctx:WxV)
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a smatch warning:
drivers/staging/comedi/drivers/jr3_pci.c:793 jr3_pci_auto_attach() info: why not propagate 'result' from comedi_pci_enable() instead of -5?

CC: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>