- 09 10月, 2014 3 次提交
-
-
由 LEROY Christophe 提交于
When using a MPC8xx as a router, 'perf' shows a significant time spent in fs_enet_interrupt() and fs_enet_start_xmit(). 'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent between spin_unlock_irqrestore() and the following instruction, hence in interrupt handling. This is due to the TX complete interrupt that fires after each transmitted packet. This patch modifies the handling of TX complete to use NAPI. With this patch, my NAT router offers a throughput improved by 21% Original performance: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 2.8MB/s 01:31 Performance with the patch: [root@localhost tmp]# scp toto pgs:/tmp toto 100% 256MB 3.4MB/s 01:16 Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 LEROY Christophe 提交于
In the probe function, use_napi is inconditionnaly set to 1. This patch removes all the code which is conditional to !use_napi, and removes use_napi which has then become useless. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chun-Hao Lin 提交于
RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support. It is a successor chip of RTL8168DP. For RTL8168EP, the read/write ocp register is via eri channel type 2, so I move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx() for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write. The way of checking dash enable is different with RTL8168DP. I use r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP, to check if dash is enabled. The driver_start() and driver_stop() of RTL8168EP is also different with RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and rtl8168ep_driver_xxx for RTL8168EP. Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not add firmware code for it. so I did not add firmware code for it. Signed-off-by: NChun-Hao Lin <hau@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2014 8 次提交
-
-
由 Fabian Frederick 提交于
Use current logging functions and add module name prefix. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
static values are automatically initialized to 0 Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
There is no reason to emit a log message for these. Based upon a suggestion from Hannes Frederic Sowa. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
-
由 Jon Maloy 提交于
One aim of commit 50100a5e ("tipc: use pseudo message to wake up sockets after link congestion") was to handle link congestion abatement in a uniform way for both unicast and multicast transmit. However, the latter doesn't work correctly, and has been broken since the referenced commit was applied. If a user now sends a burst of multicast messages that is big enough to cause broadcast link congestion, it will be put to sleep, and not be waked up when the congestion abates as it should be. This has two reasons. First, the flag that is used, TIPC_WAKEUP_USERS, is set correctly, but in the wrong field. Instead of setting it in the 'action_flags' field of the arrival node struct, it is by mistake set in the dummy node struct that is owned by the broadcast link, where it will never tested for. Second, we cannot use the same flag for waking up unicast and multicast users, since the function tipc_node_unlock() needs to pick the wakeup pseudo messages to deliver from different queues. It must hence be able to distinguish between the two cases. This commit solves this problem by adding a new flag TIPC_WAKEUP_BCAST_USERS, and a new function tipc_bclink_wakeup_user(). The latter is to be called by tipc_node_unlock() when the named flag, now set in the correct field, is encountered. v2: using explicit 'unsigned int' declaration instead of 'uint', as per comment from David Miller. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Drivers should avoid NETDEV_TX_BUSY as much as possible. They should stop the tx queue before qdisc even tries to push another packet, to avoid requeues. For a driver supporting skb->xmit_more, this is likely to be a prereq anyway, otherwise we could have a tx deadlock : We need to force a doorbell if TX ring is full. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
GENET MAC has three Tx ring priority registers: - GENET_x_TDMA_PRIORITY0 for queues 0-5 - GENET_x_TDMA_PRIORITY1 for queues 6-11 - GENET_x_TDMA_PRIORITY2 for queues 12-16 Fix bcmgenet_init_multiq() to program them correctly. Signed-off-by: NPetri Gynther <pgynther@google.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2014 21 次提交
-
-
由 WANG Cong 提交于
Probably not a big deal, but we'd better just use the one we get in retry loop. Fixes: commit 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe") Reported-by: NJoe Perches <joe@perches.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Zhou 提交于
Fix a openvswitch compilation error when CONFIG_INET is not set: ===================================================== In file included from include/net/geneve.h:4:0, from net/openvswitch/flow_netlink.c:45: include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads': >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration] >> return iptunnel_handle_offloads(skb, udp_csum, type); >> ^ >> >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast >> >> cc1: some warnings being treated as errors ===================================================== Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAndy Zhou <azhou@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Zhou 提交于
Fix a sparse warning introduced by commit: f5796684 (openvswitch: Add support for Geneve tunneling.) caught by kbuild test robot: reproduce: # apt-get install sparse # git checkout f5796684 # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/openvswitch/vport-geneve.c:109:15: sparse: incorrect type in assignment (different base types) # net/openvswitch/vport-geneve.c:109:15: expected restricted __be16 [usertype] sport # net/openvswitch/vport-geneve.c:109:15: got int # >> net/openvswitch/vport-geneve.c:110:56: sparse: incorrect type in argument 3 (different base types) # net/openvswitch/vport-geneve.c:110:56: expected unsigned short [unsigned] [usertype] value # net/openvswitch/vport-geneve.c:110:56: got restricted __be16 [usertype] sport Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAndy Zhou <azhou@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Zhou 提交于
Fix a sparse warning introduced by Commit 0b5e8b8e (net: Add Geneve tunneling protocol driver) caught by kbuild test robot: # apt-get install sparse # git checkout 0b5e8b8e # make ARCH=x86_64 allmodconfig # make C=1 CF=-D__CHECK_ENDIAN__ # # # sparse warnings: (new ones prefixed by >>) # # >> net/ipv4/geneve.c:230:42: sparse: incorrect type in assignment (different base types) # net/ipv4/geneve.c:230:42: expected restricted __be32 [addressable] [assigned] [usertype] s_addr # net/ipv4/geneve.c:230:42: got unsigned long [unsigned] <noident> # Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAndy Zhou <azhou@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hannes Frederic Sowa says: ==================== ipv6: cleanup after rt6_genid removal Leftover patches after rt6_genid removal after 705f1c86 ("ipv6: remove rt6i_genid"). Major two changes are: * keep fib6_sernum per namespace to reduce number of flushes in case system has high number of namespaces * make fn_sernum updates cheaper v2: Incorporated feedback from Cong Wang, thanks a lot! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Try to reduce number of possible fn_sernum mutation by constraining them to their namespace. Also remove rt_genid which I forgot to remove in 705f1c86 ("ipv6: remove rt6i_genid"). Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t to fib6_walk_state as recommended by Cong Wang. Cc: Cong Wang <cwang@twopensource.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Martin Lau <kafai@fb.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Marking this as static allows compiler to inline it. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
-Add __rcu annotation on table to fix sparse warnings: net/phonet/pn_dev.c:279:25: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:279:25: expected struct net_device *<noident> net/phonet/pn_dev.c:279:25: got void [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:376:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:376:17: expected struct net_device *volatile <noident> net/phonet/pn_dev.c:376:17: got struct net_device [noderef] <asn:4>*<noident> net/phonet/pn_dev.c:392:17: warning: incorrect type in assignment (different address spaces) net/phonet/pn_dev.c:392:17: expected struct net_device *<noident> net/phonet/pn_dev.c:392:17: got void [noderef] <asn:4>*<noident> -Access table with rcu_access_pointer (fixes the following sparse errors): net/phonet/pn_dev.c:278:25: error: incompatible types in comparison expression (different address spaces) net/phonet/pn_dev.c:391:17: error: incompatible types in comparison expression (different address spaces) Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NFabian Frederick <fabf@skynet.be> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
John Fastabend says: ==================== net sched rcu updates This fixes the use of tcf_proto from RCU callbacks it requires moving the unbind calls out of the callbacks and removing the tcf_proto argument from the tcf_em_tree_destroy(). This is a rework of two previous series and addresses comments from Cong. And should apply against latest net-next. The previous series links below for reference: (1/2) net: sched: do not use tcf_proto 'tp' argument from call_rcu http://patchwork.ozlabs.org/patch/396149/ (2/2) net: sched: replace ematch calls to use struct net http://patchwork.ozlabs.org/patch/396150/ net: sched: cls_cgroup tear down exts and ematch from rcu callback http://patchwork.ozlabs.org/patch/396307/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Using the tcf_proto pointer 'tp' from inside the classifiers callback is not valid because it may have been cleaned up by another call_rcu occuring on another CPU. 'tp' is currently being used by tcf_unbind_filter() in this patch we move instances of tcf_unbind_filter outside of the call_rcu() context. This is safe to do because any running schedulers will either read the valid class field or it will be zeroed. And all schedulers today when the class is 0 do a lookup using the same call used by the tcf_exts_bind(). So even if we have a running classifier hit the null class pointer it will do a lookup and get to the same result. This is particularly fragile at the moment because the only way to verify this is to audit the schedulers call sites. Reported-by: NCong Wang <xiyou.wangconf@gmail.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
It is not RCU safe to destroy the action chain while there is a possibility of readers accessing it. Move this code into the rcu callback using the same rcu callback used in the code patch to make a change to head. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
This removes the tcf_proto argument from the ematch code paths that only need it to reference the net namespace. This allows simplifying qdisc code paths especially when we need to tear down the ematch from an RCU callback. In this case we can not guarentee that the tcf_proto structure is still valid. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Some TSO engines might have a too heavy setup cost, that impacts performance on hosts sending small bursts (2 MSS per packet). This patch adds a device gso_min_segs, allowing drivers to set a minimum segment size for TSO packets, according to the NIC performance. Tested on a mlx4 NIC, this allows to get a ~110% increase of throughput when sending 2 MSS per packet. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Restart autonegotiation is necessary after setting EEE. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
In case we find a general query with non-zero number of sources, we are dropping the skb as it's malformed. RFC3376, section 4.1.8. Number of Sources (N): This number is zero in a General Query or a Group-Specific Query, and non-zero in a Group-and-Source-Specific Query. Therefore, reflect that by using kfree_skb() instead of consume_skb(). Fixes: d679c532 ("igmp: avoid drop_monitor false positives") Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
It's a trivial fix to display xmit_hash_policy for this new TLB mode since it uses transmit-hash-poilicy as part of bonding-master info (/proc/net/bonding/<bonding-interface). Signed-off-by: NMahesh Bandewar <maheshb@google.com> Reviewed-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2014 8 次提交
-
-
由 David S. Miller 提交于
Amir Vadai says: ==================== net/mlx4_en: Optimizations to TX flow This patchset contains optimizations to TX flow in mlx4_en driver. It also introduce setting/getting tx copybreak, to enable controlling inline threshold dynamically. TX flow optimizations was authored and posted to the mailing list by Eric Dumazet [1] as a single patch. I splitted this patch to smaller patches, Reviewed it and tested. Changed from original patch: - s/iowrite32be/iowrite32/, since ring->doorbell_qpn is stored as be32 The tx copybreak patch was also suggested by Eric Dumazet, and was edited and reviewed by me. User space patch will be sent after kernel code is ready. I am sending this patchset now since the merge window is near and don't want to miss it. More work need to do: - Disable BF when xmit_more is in use - Make TSO use xmit_more too. Maybe by splitting small TSO packets in the driver itself, to avoid extra cpu/memory costs of GSO before the driver - Fix mlx4_en_xmit buggy handling of queue full in the middle of a burst partially posted to send queue using xmit_more Eric, I edited the patches to have you as the Author and the first signed-off-by. I hope it is ok with you (I wasn't sure if it is ok to sign by you), anyway all the credit to those changes should go to you. Patchset was tested and applied over commit 1e203c1a "(net: sched: suspicious RCU usage in qdisc_watchdog") [1] - https://patchwork.ozlabs.org/patch/394256/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Instead of setting inline threshold using module parameter only on driver load, use set_tunable() to set it dynamically. No need to store the threshold per ring, using instead the netdev global priv->prof->inline_thold Initial value still is set using the module parameter, therefore backward compatability is kept. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold) Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Reorganize code to call is_inline() once, so compiler can inline it Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Properly clear tx_info->ts_requested Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Access skb_headlen() once in tx flow Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Acces skb_shinfo(skb) once in tx flow. Also, rename @i variable to @i_frag to avoid confusion, as the "goto tx_drop_unmap;" relied on this @i variable. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-