This mode group id_list was never being freed.

v2: take David's suggestion to free in minor_free.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The ->disable_plane hook always had a return value, but only since the
introduction of primary planes was there any implementation that
actually failed.

So handle such failures correctly.

Note that drm_plane_force_disable is special: In the modeset cleanup
case we first disable all crtc, so primary planes should all be freed
already. And in the fb helper we only reset non-primary planes. Still
better be paranoid and add an early return.

I don't see how this could happen, but it might fix the fb refcount
underrun Thierry is seeing. Matt Roper spotted this issue.

Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The introduction of primary planes has apparently caused a bit of fb
refcounting fun for people. That makes it a good time to clean up the
arcane rules and slight differences between ->update_plane and
->set_config. The new rules are:

- The core holds a reference for both the new and the old fb (if
  they're non-NULL of course) while calling into the driver through
  either ->update_plane or ->set_config.

- Drivers may not clobber plane->fb if their callback fails. If they
  do that, they need to store a pointer to the old fb in it again.
  When calling into the driver plane->fb still points at the current
  (old) framebuffer.

- The core will update the plane->fb pointer on success. Drivers can
  do that themselves too, but aren't required to any more for the
  primary plane.

- The core will update fb refcounts for the plane->fb pointer,
  presuming the drivers hold up their end of the bargain.

v2: Remove now unused tmpfb (Thierry)

v3: Drop broken changes from drm_mode_setplane (Ville). Also polish
the commit message a bit.

v4: Also fix up the handling of ->disable_plane in
drm_plane_force_disable. The issue was that we didn't save plane->fb
over the ->disable_plane call. Just paranoia, nothing relies on this.

v5: Keep still useful comments about directly calling ->set_config,
which I should have done for v4 already. Requested by Matt.

Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Userspace clients which wish to receive all DRM planes (primary and
cursor planes in addition to the traditional overlay planes) may set the
DRM_CLIENT_CAP_UNIVERSAL_PLANES capability.

v2: Hide behind drm.universal_planes module option [suggested by
    Daniel Vetter]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a new drm_crtc_init_with_planes() to allow drivers to provide
specific primary and cursor planes at CRTC initialization.  The existing
drm_crtc_init() interface remains to avoid driver churn in existing
drivers; it will initialize the CRTC with a plane helper-created primary
plane and no cursor plane.

v2:
  - Move drm_crtc_init() to plane helper file so that nothing in the DRM
    core depends on helpers.  [suggested by Daniel Vetter]
  - Keep cursor parameter to drm_crtc_init_with_planes() a void* until
    we actually add cursor support.  [suggested by Daniel Vetter]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a plane type property to allow userspace to distinguish plane types.

v2: Driver-specific churn eliminated now that drm_plane_init() and
    drm_universal_plane_init() were separated out in a previous patch.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a new plane initialization interface for universal plane support
that allows a specific plane type (primary, cursor, or overlay) to
be specified.

drm_plane_init() remains as a compatibility API to reduce churn in
existing drivers.  The 'bool priv' parameter has been changed to
'bool is_primary' under the assumption that all existing uses of
private planes were representing primary planes.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

This function will be used by the universal plane helpers and may also
be useful for individual drivers.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The DRM core currently only tracks "overlay"-style planes.  Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.

v2: Add drm_for_each_legacy_plane() iterator to smooth transition
    of drivers with plane loops.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.

v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

control- and render nodes are intended to be master-less.

v2: Replace tests for !legacy with tests for !mode_group for readability.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

Lets make sure some basic expressions are always true:
  bpp != NULL
  width != NULL
  height != NULL
  stride = bpp * width < 2^32
  size = stride * height < 2^32
  PAGE_ALIGN(size) < 2^32

At least the udl driver doesn't check for multiplication-overflows, so
lets just make sure it will never happen. These checks allow drivers to do
any 32bit math without having to test for mult-overflows themselves.

The two divisions might hurt performance a bit, but dumb_create() is only
used for scanout-buffers, so that should be fine. We could use 64bit math
to avoid the divisions, but that may be slow on 32bit machines.. Or maybe
there should just be a "safe_mult32()" helper, which currently doesn't
exist (I think?).
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

- Standardized on "Returns:" Block.
- Sprinkle missing kerneldoc over all exported functions and all
  ioctls.
- Add a stern warning that driver's really shouldn't use
  drm_mode_group_init_legacy_group.
- Usual attempt at more consistency.
- Add warnings that drm_mode_object_get/put don't do refcounting,
  despite what the names might lead to believe.
- Try to clarify the framebuffer setup/cleanup functions wrt driver
  private framebuffers - I've fallen recently over this when reviewing
  i915 fbdev patches.
- Align function parameters where the kerneldoc has been updated.
- Most of the drm_get_*_name functions aren't thread safe. Add stern
  warnings where this is the case.

Since a lot of the functions in drm_crtc.c are boilerplate to handle
properties and create default sets of them it might be useful to
extract all that code into a new file drm_property.c. Especially since
properties will be used a lot more in the future.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Makes more sense and gives better grouping in the DocBook function
reference sections. To make this possible we need to expose two
functions from drm_crtc.c though. To avoid further namespace pollution
in the system wide headers create a new internal header for such drm
internal symbols.

I expect that longer-term we'll add tons more, but since my goal here
is to polish the kerneldoc that's for another day.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's not really any value in stating that no locking is needed. And
even if the comment is useful, a check for the right mutex at the
beginning of the function is better since that can't be ingored as
easily as a bit of documentation.

Note that drm_mode_probed_add in drm_crtc.c is also changed, the next
patch will move this into drm_modes.c

v2: Don't add locking WARN_ONs where it is not strictly required (i.e.
the two functions to validate/prune mode lists).
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's only used by imx, and that one gets it wrong - there's no need
to deteach the encoder before removing it.

And really, neither current drm modesetting code nor all the userspace
we have can handle dynamic changes in the set of possible encoders for
a given connector. So let's just remove this before someone starts
doing something really nasty with it.

As a plus, one less kerneldoc comment to write.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just like we have for connector type etc.

v2: drop static array (Chris)
v3: add kdoc (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The encoder possible_crtcs mask identifies which CRTCs can be bound to
a particular encoder.  Each bit from bit 0 defines an index in the list
of CRTCs held in the DRM mode_config crtc_list.  Rather than having
drivers trying to track the position of their CRTCs in the list, expose
the code which already exists for calculating the appropriate mask bit
for a CRTC.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
[treding@nvidia.com: add drm_crtc_index(), move to core]
Signed-off-by: NThierry Reding <treding@nvidia.com>

Not all drivers will need take all the modeset locks for dirtyfb, so
push the locking down to the drivers.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_fb_get_bpp_depth() likes to complain about unsupported pixel formats
but doesn't bother telling us what the format was. Also format_check()
just returns an error when it encouters an invalid format, leaving the
user scratching his head trying to figure out why addfb failed. Make
life a bit easier by using drm_get_format_name() in both places.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Return -ENOENT for framebuffers like we do for other mode objects that
can't be found.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We tend to return -EINVAL for everything. Let's try to help poor
userland developers a bit by at least returning -ENONET for missing
objects.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix a little spelling of drm_crtc_convert_umode() comment.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The kernel shouldn't accept invalid modes, just say No.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that the coding of stereo layout has changed from a bit field to an
enum, we need remove that check.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some stereo modes, like frame packing, need a larger CRTC viewport than
the "natural" underlying 2D mode and thus drm_crtc_check_viewport()
needs to query the adjusted mode to use the correct h/vdisplay.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both setcrtc and page_flip are checking that the framebuffer is big
enough for the defined crtc viewport (x, y, hdisplay, vdisplay). Factor
that code out in a single function.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When setting a stereo 3D mode, there can be only one bit set describing
the layout of the frambuffer(s). So reject invalid modes early.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This capability allows user space to control the delivery of modes with
the 3D flags set. This is to not play games with current user space
users not knowing anything about stereo 3D flags and that could try
to set a mode with one or several of those bits set.

So, the plan is to remove the stereo modes from the list of modes we
give to DRM clients by default, and let them through if we are being
told otherwise.

stereo_allowed is bound to the drm_file structure to make it a
per-client setting, not a global one.

v2: Replace clearing 3D flags by discarding the stereo modes now that
    they are regular modes.
v3: SET_CAP -> SET_CLIENT_CAP rename (Chris Wilson)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:

  commit a14b1b42
  Author: Mandeep Singh Baines <mandeep.baines@gmail.com>
  Date:   Fri Jan 20 12:11:16 2012 -0800

      drm: remove master fd restriction on mode setting getters

However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.

With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.

For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.

v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t

Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let applications know whether the kernel supports asynchronous page
flipping.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

This lets drivers see the flags requested by the application

[airlied: fixup for rcar/imx/msm]
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

It's only used in drm_crtc.c.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was last used by nouveau, replaced by a driver-specific property
in:

  commit de691855
  Author: Ben Skeggs <bskeggs@redhat.com>
  Date:   Mon Oct 17 12:23:41 2011 +1000

      drm/nouveau: improve dithering properties, and implement proper auto mode
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes it so that reloading a module does not cause all the
connector ids to change, which are user-visible and sometimes used
for configuration.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

So it looks like for virtual hw cursors on QXL we need to inform
the "hw" device what the cursor hotspot parameters are. This
makes sense if you think the host has to draw the cursor and interpret
clicks from it. However the current modesetting interface doesn't support
passing the hotspot information from userspace.

This implements a new cursor ioctl, that takes the hotspot info as well,
userspace can try calling the new interface and if it gets -ENOSYS it means
its on an older kernel and can just fallback.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Drivers are allowed (actually have to) disable unrelated crtcs in
their ->set_config callback (when we steal all the connectors from
that crtc). If they do that they'll clear crtc->fb to NULL.

Which results in a refcount leak, since the drm core is keeping track
of that reference.

To fix this track the old fb of all crtcs and adjust references for
all of them. Of course, since we only hold an additional reference for
the fb for the current crtc we need to increase refcounts before we
drop the old one.

This approach has the benefit that it inches us a bit closer to an
atomic modeset world, where we want to update the config of all crtcs
in one step.

This regression has been introduce in the framebuffer refcount
conversion, specifically in

commit b0d12325
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 11 01:07:12 2012 +0100

    drm: refcounting for crtc framebuffers
Reported-by: NRussell King <linux@arm.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>