- 20 9月, 2017 10 次提交
-
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. There's no need to use RBP as a temporary register for the TBL value, because it always stores the same value: the address of the K256 table. Instead just reference the address of K256 directly. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the TBL register, and use RBP to store the pre-aligned stack pointer. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the REG_D register, and use RBP to store the pre-aligned stack pointer. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R11 instead of RBP. Since R11 isn't a callee-saved register, it doesn't need to be saved and restored on the stack. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use RSI instead of RBP for RT1. Since RSI is also used as a the 'dst' function argument, it needs to be saved on the stack until the argument is needed. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. Both are callee-saved registers, so the substitution is straightforward. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Josh Poimboeuf 提交于
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. R12 can't be used as the RT0 register because of x86 instruction encoding limitations. So use R12 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by: NEric Biggers <ebiggers@google.com> Reported-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NEric Biggers <ebiggers@google.com> Acked-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
During the change to use aligned buffers, the deallocation code path was not updated correctly. The current code tries to free the aligned buffer pointer and not the original buffer pointer as it is supposed to. Thus, the code is updated to free the original buffer pointer and set the aligned buffer pointer that is used throughout the code to NULL. Fixes: 3cfc3b97 ("crypto: drbg - use aligned buffers") CC: <stable@vger.kernel.org> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 17 9月, 2017 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
-
由 Markus Trippelsdorf 提交于
Commit 5620a0d1 ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1 ("firmware: delete in-kernel firmware") Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Acked-by: NGreg K-H <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ido Schimmel 提交于
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec1 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NAndreas Rammhold <andreas@rammhold.de> Reported-by: NFlorian Klink <flokli@flokli.de> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Machek 提交于
Fix link in filter.txt. Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2017 21 次提交
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ...
-
由 Edward Cree 提交于
Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by: NEdward Cree <ecree@solarflare.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Commit 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b532797 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: NEric Dumazet <edumazet@googl.com> Reported-by: Nliujian <liujian56@huawei.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa7639 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7 ("net: systemport: Support 64bit statistics") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384 ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Jha 提交于
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com> Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com> Acked-by: NSudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull firmware removal from Greg KH: "Many many years ago (at the kernel summit in Boston), we all came to the agreement that the firmware/ tree should be dropped from the kernel, and everyone use the linux-firmware package instead. For some minor reason, David Woodhouse didn't send the pull request at that point in time, and everyone forgot about this. The topic came up in the hallway track at the Plumbers conference this week, so here's a single patch that drops the whole firmware tree. The last firmware update was back in 2013, and all distros have been using linux-firmware instead since at least that year, if not before. The only commits to that directory since 2013 was some kbuild fixups for various build tool issues. So lets finally drop this, we don't need to lug them around in the kernel source tree anymore, especially as no one wants or uses them. This has passed build testing with 0-day, I don't think it made it into linux-next this week, but I figured it was good to get in before 4.14-rc1 was out" * tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: delete in-kernel firmware
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull arch/nios2 update from Ley Foon Tan. * tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: time: Read timer in get_cycles only if initialized nios2: add earlycon support to 3c120 devboard DTS
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fix from Michael Ellerman: "Just one fix, for the handling of alignment interrupts on dcbz instructions. Thanks to Paul Mackerras, Christian Zigotzky, Michal Sojka" * tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix handling of alignment interrupt on dcbz instruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux由 Linus Torvalds 提交于
Pull orangefs updates from Mike Marshall: "Some cleanups and a big bug fix for ACLs. When I was reviewing Jan Kara's ACL patch, I realized that Orangefs ACL code was busted, not just in the kernel module, but in the server as well. I've been working on the code in the server mostly, but here's one kernel patch, there will be more" * tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: Adjust three checks for null pointers orangefs: Use kcalloc() in orangefs_prepare_cdm_array() orangefs: Delete error messages for a failed memory allocation in five functions orangefs: constify xattr_handler structure orangefs: don't call filemap_write_and_wait from fsync orangefs: off by ones in xattr size checks orangefs: documentation clean up orangefs: react properly to posix_acl_update_mode's aftermath. orangefs: Don't clear SGID when inheriting ACLs
-
由 Dmitry Torokhov 提交于
Prepare second round of input updates for 4.14 merge window.
-
由 Kai-Heng Feng 提交于
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-