Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It has come to my knowledge that the Technotrend 1500 DVB cards have 
been sold bundled with at least two different kinds of remotes, a grey 
one and a black one. 
This patch adds support for the extra keys in the black remote to 
ir-keymaps.c.
Signed-off-by: NVille-Pekka Vainio <vpivaini@cs.helsinki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to: Thierry MERLE <thierry.merle@free.fr> for pointing this
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

One bit wide bitfields need to declared unsigned to have the range 0 to
1, or they have the range -1 to 0.

A few techniques to reduce the driver's size by about 1700 bytes on ia32,
probably more on x86-64.

Put the biggest fields first, less padding is necessary that way.

Put fields with a limited range into a smaller type.  For example
VideoChannels will fit in 3 bits, and TunerType can use 8 bits.

Vin_Reg1, Vin_Reg2, and Dvi_yuv define values for 8-bit registers, but
they can't just go into an 8-bit field with no changes, since -1 was used
as a flag to indicate a value was not present.  So what we do is create a
one-bit flag for each one to indicate if a value is or is not present.

This only takes 9 bits and has the added advantage that when the register
isn't overridden (Vin_Reg[12] never are) it doesn't need to appear in the
structure definition since the default value for the flag will be zero.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch reduces usbvision driver on about 1Kb on i386 over the
original version with the old struct:
   text    data     bss     dec     hex filename
  52312   11848      60   64220    fadc old/usbvision.ko
  52474   10708      60   63242    f70a new/usbvision.ko
Acked-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Changed usbvision cards table to allow:
	1) Not repeat USB ID on two structs;
	2) Not need to specify both usb and card description tables at
	   the same order, removing some magic;
Some cards had duplicated names. Fixed.
A test for an specific board were doing by using a string comparation.
The comparation were wrong. Also, it is not a good practice to recognize
a board based on his string name.
Acked-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

fixed hotplugging for dvbnet
Signed-off-by: NMichal CIJOML Semler <cijoml@volny.cz>
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

fixing hotplug issue for demux[n] and dvr[n]
Signed-off-by: NMichal CIJOML Semler <cijoml@volny.cz>
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

fixed frontend hotplug issue
Signed-off-by: NMichal CIJOML Semler <cijoml@volny.cz>
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The V4L2 API requires a unique bus_info string returned as part of the
v4l2_capability structure.  These changes gather up the USB address
information, from the underlying device, into a string and report that
out through v4l2 and via sysfs (for completeness).
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If you modprobe the b2c2-flexcop-pci module you got a hardlock of your system.
This is due the usage of spin_lock before spin_lock_init is called.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sn9c102 is a v4l2 driver, except it used a couple v4l1 helper functions.
Stop using those functions and depend on V4L2 in Kconfig.
Acked-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Makes sure they don't get copied onto the stack.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There were many places in the driver which had long sequences of constant
register initializations.  These were done with one function call per
register.  The register address and value were immediate values in the
function calls.
This is very inefficient, as each register and value take twice the space
when they are code, as each includes a push instruction to put it on
the stack.  There there is the overhead, both size and time, for a
function call for each register.  It's also quite a few lines of C code
to do this.
The patch creates a function that writes multiple registers from a list,
and a macro that makes it easy to construct a such a list as a const
static local to send to the function.
This gets rid of quite a bit of C code, and shrinks the driver by around
8k, while at the same time being more efficient.
Acked-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our
surveillance, conferencing, and medical imaging systems.  The attached
relatively small patch adds support for these cards, which fall into two broad
* boards with one or more Bt878s, one or more composite inputs, and no S-video
  or tuner inputs
* boards with one Bt878, one composite input, one S-video input, and no tuner
  input
Signed-off-by: NScott Alfter <salfter@ssai.us>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It's KERN_WARNING "lgdt....", not "KERN_WARNING lgdt...."
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The tda7432, tda9875 and tvaudio media drivers don't need to include
the linux/i2c-algo-bit.h header file.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add support for the S-Video and CVBS (composite) analog video inputs
of the Leadtek WinFast DTV1000 T adapter.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Check the return value of kmalloc() in function se401_start_stream(), in
file drivers/media/video/se401.c.
Signed-off-by: NAmit Choudhary <amit2030@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAmit Choudhary <amit2030@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch just defines the remote control type.
Signed-off-by: NEd Vipas <epvipas@gmail.com>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When the tuner is attached, the tda10046 is not initilized yet, so it
is searching for its firmware. If the tuner is attached to the tda10046
silent i2c port, a bus collision can occur. Now the version is probed
during the first init or sleep call.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Set tda8290 to analog mode after init, otherwise the tuner driver will 
not accept i.e. the standby command.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch causes the bttv driver to automatically load the dvb-bt8xx module
for bttv/dvb hybrid cards. Successfully tested with a pcHDTV HD-2000 card.
This patch is based on the recent patches to enable autoloading of cx88-dvb,
cx88-blackbird and saa7134-dvb.
Signed-off-by: NJarod Wilson <jwilson@redhat.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix audio input source for capturing(playing) audio on AverTv Go 007 cards.
Signed-off-by: NDamian Minkov <damencho@damencho.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx88_print_irqbits were expecting a string pointer with 32 bytes. Better 
to pass the string size and use ARRAY_SIZE on its calls.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

ATI HDTV Wonder needs to initialize some registers before allowing the
tuner to start working.
The current logic have lots of magic. This patch makes the code cleaner,
using ARRAY_SIZE() for the initialization array and using a
bidimensional array, instead of doing some stuff like:
	&buffer[i+2]
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

there were several "magic" for loops, addressing gpiomux array size (4).
Adrian Bunk showed that one of the loops were wrong, going from 0 to 4.

This patch provides the right fix for this trouble, by using ARRAY_SIZE
on all places where we have a for loop using gpiomux.

Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

@ Don't assume that SOF headers can't cross packets boundaries
@ Fix compression quality selection
+ Add support for MI-0360 image sensor
* Documentation updates
@ Fix sysfs
@ MI0343 rewritten
* HV7131R color fixes and add new ABLC control
* Rename the archive from "sn9c102" to "sn9c1xx"
* fix typos
* better support for TAS5110D
@ fix OV7630 wrong colors
@ Don't return an error if no input buffers are enqueued yet on VIDIOC_STREAMON
* Add informations about colorspaces
* More appropriate error codes in case of failure of some system calls
* More precise hardware detection
* Add more informations about supported hardware in the documentation
+ More supported devices
+ Add support for HV7131R image sensor
Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

After looking at a section bug (in the non-modular case, clearly 
non-init code referenced the __initdata parport_nr[]), I thought it was 
time to convert this driver to module_{init,exit}.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add raw bayer support to the ov7670 driver
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix up Cafe/ov7670 copyrights and maintainer entries
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Don't mirror ov7670 images by default.

The ov7670 sensor driver sets the mirror bit by default, which is not
the desired mode.  OLPC has been running with this patch for a while.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add suspend/resume support to the Cafe CCIC driver.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix up unsociable Cafe CCIC delays.

The Cafe CCIC driver contains some lengthy delays, some of which are 
unnecessary and some of which are done under lock.  Some were marked
with comments, but the comments somehow failed to make the issue go
away.  So fix it for real.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Remove an obsolete PCI ID.

The CAFE driver includes three PCI IDs, one of which corresponds to 
a development board which is no longer in use.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>