add snvs power key driver.
It work in imx chips after i.mx6sx

ON/OFF key used power on/off whole system.
This driver make it wakeup from suspend state when short press
ON/OFF key.

Long time press will trig SNVS power off chip without software
intervention.
Signed-off-by: NRobin Gong <b38343@freescale.com>
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Get the scaling factor when it reads the sys params. The width value will
multiple the factor and report the value in the TOUCH_MAJOR event.
Signed-off-by: NHungNien Chen <hn.chen@weidahitech.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is no reason to have a newline between plat_id and xml_id1.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix this compile error:

drivers/built-in.o: In function `arc_ps2_probe':
/mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource'
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This fixes the following warning:

   drivers/input/touchscreen/wdt87xx_i2c.c: In function 'wdt87xx_validate_firmware':
>> drivers/input/touchscreen/wdt87xx_i2c.c:472:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'size_t' [-Wformat=]
       size, fw->size);
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

When applying touchscreen parameters specified in device tree let's make
sure we keep whatever setup was done by the driver and not reset the
missing values to zero.
Reported-by: NPavel Machek <pavel@ucw.cz>
Tested-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it
as such. This also allows us to drop some initialization code as
input_init_mt_slots() will do that for us.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of iterating over all bits in a bitmap and test them individually
let's siwtch to for_each_set_bit() which is more compact and is also
faster.

Also use bitmap_weight() when counting number of set bits.

This also fixes INPUT_DO_TOGGLE() implementation as it should have used
*_CNT as the upper boundary, not *_MAX.
Signed-off-by: NAnshul Garg <aksgarg1989@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This is a driver for Weida HiTech WDT87xx series touchscreen controller.
Signed-off-by: NHungNien Chen <hn.chen@weidahitech.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Currently we are reporting the button state as inverted on all boards with
an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and
utoo-p66 tablet.

The axp209 datasheet clearly states that the power button must be connected
between the PWRON key and ground. Which means that on a press we will get
a falling edge (dbf) irq not a rising one, and likewise on release we will
get a rising edge (dbr) irq, not a falling one.

This commit swaps the check for the 2 irqs fixing the inverted reporting of
the power button state.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NCarlo Caione <carlo@caione.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The controller only receives commands when its present. So for the
correct LED to be lit the LED command has to be sent on the present
event.
Signed-off-by: NPavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Based on Patch by Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>:
Add the logic to set the LEDs on XBox Wireless controllers.  Command
sequence found by sniffing the Windows data stream when plugging the
device in.

Updated based on comments on linux-input:
unify codepaths in xpad_send_led_command for wired/ wireless controller.
Also document command values for clarification.
All values tested on Xbox 360 Wireless Controller.
Signed-off-by: NPavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The i2c_master_recv() uses readsize to receive data from i2c but compares
to size of rdbuf which is always 27. This would cause problem when the
max_fingers is not 5. Change the comparison value to readsize instead.

Fixes: 36874c7e ("Input: pixcir_i2c_ts - support up to 5 fingers and
hardware tracking IDs:)

Cc: stable@vger.kernel.org
Signed-off-by: NFrodo Lai <frodo_lai@bcmcom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for
output. Simplify drivers accordingly.

Note that in the case of the drv260x driver error checking is more
strict now because -ENOSYS is reported to the caller now. But this
should only be returned if GPIOLIB is disabled which shouldn't happen as
the driver depends on GPIOLIB.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Chromebooks can have more than one Embedded Controller so the
cros_ec device id has to be incremented for each EC registered.

Add a new structure to represent multiple EC as different char
devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to
cros_ec_device and allows sysfs inferface for cros_pd.

Also reduce number of allocated objects, make chromeos sysfs
class object a static and add refcounting to prevent object
deletion while command is in progress.
Signed-off-by: NGwendal Grignou <gwendal@chromium.org>
Reviewed-by: NDmitry Torokhov <dtor@chromium.org>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The MFD driver should only have the logic to instantiate its child devices
and setup any shared resources that will be used by the subdevices drivers.

The cros_ec MFD is more complex than expected since it also has helpers to
communicate with the EC. So the driver will only get more bigger as other
protocols are supported in the future. So move the communication protocol
helpers to its own driver as drivers/platform/chrome/cros_ec_proto.c.
Suggested-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Commit 1b84f2a4 ("mfd: cros_ec: Use fixed size arrays to transfer
data with the EC") modified the struct cros_ec_command fields to not
use pointers for the input and output buffers and use fixed length
arrays instead.

This change was made because the cros_ec ioctl API uses that struct
cros_ec_command to allow user-space to send commands to the EC and
to get data from the EC. So using pointers made the API not 64-bit
safe. Unfortunately this approach was not flexible enough for all
the use-cases since there may be a need to send larger commands
on newer versions of the EC command protocol.

So to avoid to choose a constant length that it may be too big for
most commands and thus wasting memory and CPU cycles on copy from
and to user-space or having a size that is too small for some big
commands, use a zero-length array that is both 64-bit safe and
flexible. The same buffer is used for both output and input data
so the maximum of these values should be used to allocate it.
Suggested-by: NGwendal Grignou <gwendal@chromium.org>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This change creates a new input handler called "leds" that exports LEDs on input
devices as standard LED class devices in sysfs and allows controlling their
state via sysfs or via any of the standard LED triggers. This allows to
re-purpose and reassign LDEs on the keyboards to represent states other
than the standard keyboard states (CapsLock, NumLock, etc).

The old API of controlling input LEDs by writing into /dev/input/eventX
devices is still present and will take precedence over accessing via LEDs
subsystem (i.e. it may override state set by a trigger). If input device is
"grabbed" then requests coming through LED subsystem will be ignored.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

input_mt_init_slots() will do that for us.
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Goodix touchscreens export through their registers a Product ID and
Firmware Version. The Product ID is an ASCII encoding of the product name
(e.g.: "911").

Export to sysfs (through the input subsystem) the product id and firmware
version read from the device rather than using constant values.
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix sparse warning:

drivers/input/touchscreen/goodix.c:182:26: warning: Variable length array is used.

Replace the variable length array with fixed length.

Some Goodix devices have maximum 5 touch points, while others have 10 touch
points. Using the maximum length (80 bytes) for all devices will lead to
wasting 40 bytes on stack when using devices with maximum 5 touch points.
However, that is preferable to using kmalloc which will use even more
resources.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix alignment to match open parenthesis detected by running checkpatch.pl
--strict.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds OnKey driver support for DA9063.
Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Previously the elan_i2c touchpad driver would simply request the firmware
"/lib/firmware/elan_i2c.bin", which does not work well if there are
multiple such devices in the system.

Let's append the "product ID" (by using the same function as the sysfs
interface for consistency) to the filename.  This results in filenames of
the form "/lib/firmware/elan_i2c_72.0.bin", allowing you to support
multiple elan_i2c touchpads on the same device by simply naming each
device's FW with its corresponding product ID.  This way when you trigger a
fw update the driver will load the correct binary.
Signed-off-by: NCharlie Mooney <charliemooney@chromium.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In order to support multiple IC types for i2c/smbus protocol, add get ic
type command and use this data when checking firmware page count and
signature address.
Signed-off-by: NDuson Lin <dusonlin@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Cc: stable@vger.kernel.org
Tested-by: tommy.gagnes@gmail.com
Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically
only in the 0-1 range dividing this by 2 results in a range of 0-0.

And even for v7 devices where this does not lead to making the trackstick
entirely unusable, it makes it twice as slow as before we added v7 support
and were using the ps/2 mouse emulation of the dual point setup.

If some kind of generic slowdown is actually necessary for some devices,
then that belongs in userspace, not in the kernel.

Cc: stable@vger.kernel.org
Reported-and-tested-by: NRico Moorman <rico.moorman@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds new icbody type to the list recognized by Elantech PS/2 driver.

Cc: stable@vger.kernel.org
Signed-off-by: NSam Hung <sam.hung@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Focaltech touchpads report finger width in packet[5] of absolute packet.
Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
0xff is reported, when a large contact area is detected.
This can be handled in userspace.
Signed-off-by: NDmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Cc: stable@vger.kernel.org
Reported-and-tested-by: NDavid Zafra Gómez <dezeta@klo.es>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

When stop_streaming is called while a frame is currently being retrieved, the
buffer being filled will still be returned with BUF_STATE_DONE. By resetting
the sequence number and checking before returning the buffer, it can now
correctly be returned with BUF_STATE_ERROR.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add dev_dbg statements for easier future debugging; also change the warning
about packet ID mismatches to debug output to avoid flooding the logs. This
warning is only important in a very specific/rare use case when trying to
correlate input events with video data.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add missing functions to query the single fixed frame size (960x540) and
supported frame rates. Technically, the SUR40 supports any arbitrary frame
rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we
just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth,
one raw frame will take about 11 ms to transmit. If the poll interval is above
5 ms, fully handling one frame will take longer than 16 ms and the overall
frame rate will drop below 60 FPS. To get the full frame rate without blocking
all the time and still allowing for a bit of timing jitter, we reduce the poll
interval to 4 ms.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.

In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.

Test compiled on x86_64 against:

	* allnoconfig
	* allmodconfig
	* allyesconfig

@ const_found @
identifier ops;
@@

const struct kernel_param_ops ops = {
};

@ const_not_found depends on !const_found @
identifier ops;
@@

-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};

Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The variable no_decel is bool type so assigning "true" instead of "1".
Also, synaptics_i2c_get_input() has bool return type, so let's use "false"
there.
Signed-off-by: NShailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The variable psmouse_smartscroll is bool type so assigning true
instead of 1.
Signed-off-by: NShailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NShailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>