- 12 3月, 2011 18 次提交
-
-
由 Andy Adamson 提交于
Data servers not sharing a session with the mount MDS always have an empty cl_superblocks list. Replace the cl_superblocks empty list check to see if it is time to shut down renewd with the NFS_CS_STOP_RENEW bit which is not set by such a data server. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Data servers require a zero stateid seqid, and there is no advantage to not doing the same for all NFSv4.1 Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Now nfs_get_client returns an nfs_client ready to be used no matter if it was found or created. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Prevents an Oops triggered by CB_LAYOUTRECALL and LAYOUTGET race on a pnfs_layout_hdr first pnfs_layout_segment. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Cleanup nfs_read_data. We also won't use CONFIG_NFS_V4_1 for additional NFSv4.1 fields in subsequent patches. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The return values are not used by any callers. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The code was doing nothing more in either branch of the if. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
rpc_run_task can only fail if it is not passed in a preallocated task. However, that is not at all clear with the current code. So remove several impossible to occur failure checks. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
queue_work() only returns 0 or 1, never a negative value. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The pnfs code was using throughout the lock order i_lock, cl_lock. This conflicts with the nfs delegation code. Rework the pnfs code to avoid taking both locks simultaneously. Currently the code takes the double lock to add/remove the layout to a nfs_client list, while atomically checking that the list of lsegs is empty. To avoid this, we rely on existing serializations. When a layout is initialized with lseg count equal zero, LAYOUTGET's openstateid serialization is in effect, making it safe to assume it stays zero unless we change it. And once a layout's lseg count drops to zero, it is set as DESTROYED and so will stay at zero. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
We do not need to clear the NFS_LAYOUT_BULK_RECALL, as setting it guarantees that NFS_LAYOUT_DESTROYED will be set once any outstanding io is finished. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The code could violate the following from RFC5661, section 12.5.3: "Once a client has no more layouts on a file, the layout stateid is no longer valid and MUST NOT be used." This can occur when a layout already has a lseg, starts another non-everlapping LAYOUTGET, and a CB_LAYOUTRECALL for the existing lseg is processed before we hit pnfs_layout_process(). Solve by setting, each time the client has no more lsegs for a file, a flag which blocks further use of the layout and triggers its removal. This also fixes a second bug which occurs in the same instance as above. If we actually use pnfs_layout_process, we add the new lseg to the layout, but the layout has been removed from the nfs_client list by the intervening CB_LAYOUTRECALL and will not be added back. Thus the newly acquired lseg will not be properly returned in the event of a subsequent CB_LAYOUTRECALL. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
There have been a number of recent reports that NFSROOT is no longer working with default mount options, but fails only with certain NICs. Brian Downing <bdowning@lavos.net> bisected to commit 56463e50 "NFS: Use super.c for NFSROOT mount option parsing". Among other things, this commit changes the default mount options for NFSROOT to use TCP instead of UDP as the underlying transport. TCP seems less able to deal with NICs that are slow to initialize. The system logs that have accompanied reports of problems all show that NFSROOT attempts to establish a TCP connection before the NIC is fully initialized, and thus the TCP connection attempt fails. When a TCP connection attempt fails during a mount operation, the NFS stack needs to fail the operation. Usually user space knows how and when to retry it. The network layer does not report a distinct error code for this particular failure mode. Thus, there isn't a clean way for the RPC client to see that it needs to retry in this case, but not in others. Because NFSROOT is used in some environments where it is not possible to update the kernel command line to specify "udp", the proper thing to do is change NFSROOT to use UDP by default, as it did before commit 56463e50. To make it easier to see how to change default mount options for NFSROOT and to distinguish default settings from mandatory settings, I've adjusted a couple of areas to document the specifics. root_nfs_cat() is also modified to deal with commas properly when concatenating strings containing mount option lists. This keeps root_nfs_cat() call sites simpler, now that we may be concatenating multiple mount option strings. Tested-by: NBrian Downing <bdowning@lavos.net> Tested-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: <stable@kernel.org> # 2.6.37 Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in fs/nfs/nfs4proc.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
There are no more external users of nfs4_state_mark_reclaim_nograce() or nfs4_state_mark_reclaim_reboot(), so mark them as static. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want SEQUENCE status bits to be handled by the state manager in order to avoid threading issues. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
nfs4_schedule_state_recovery() should only be used when we need to force the state manager to check the lease. If we just want to start the state manager in order to handle a state recovery situation, we should be using nfs4_schedule_state_manager(). This patch fixes the abuses of nfs4_schedule_state_recovery() by replacing its use with a set of helper functions that do the right thing. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2011 10 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> [Trond: fix whitespace errors] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ricardo Labiaga 提交于
Fix bug where we currently retry the EXCHANGEID call again, eventhough we already have a valid clientid. Instead, delay and retry the CREATE_SESSION call. Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ben Hutchings 提交于
xs_create_sock() is supposed to return a pointer or an ERR_PTR-encoded error, but it currently returns 0 if xs_bind() fails. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [v2.6.37] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Frank Filz 提交于
(try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid The problem was use of an int32, which when converted to a uint64 is sign extended resulting in a fileid that doesn't fit in 32 bits even though the intent of the function is to fit the fileid into 32 bits. Signed-off-by: NFrank Filz <ffilzlnx@us.ibm.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> [Trond: Added an include for compat.h] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jovi Zhang 提交于
this commit fix compilation warning as following: linux-2.6/fs/nfs/nfs4proc.c:3265: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Fomichev 提交于
add kmalloc return value check in decode_and_add_ds Signed-off-by: NStanislav Fomichev <kernel@fomichev.me> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
We leak the memory allocated to 'ctxt' when we return after 'ib_dma_mapping_error()' returns !=0. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
I've been adding in more artificial delays in the NFSv4 commit and close codepaths to uncover races. The kernel I'm testing has the patch to close the race in __rpc_wait_for_completion_task that's in Trond's cthon2011 branch. The reproducer I've been using does this in a loop: mkdir("DIR"); fd = open("DIR/FILE", O_WRONLY|O_CREAT|O_EXCL, 0644); write(fd, "abcdefg", 7); close(fd); unlink("DIR/FILE"); rmdir("DIR"); The above reproducer shouldn't result in any silly-renaming. However, when I add a "msleep(100)" just after the nfs_commit_clear_lock call in nfs_commit_release, I can almost always force one to occur. If I can force it to occur with that, then it can happen without that delay given the right timing. nfs_commit_inode waits for the NFS_INO_COMMIT bit to clear when called with FLUSH_SYNC set. nfs_commit_rpcsetup on the other hand does not wait for the task to complete before putting its reference to it, so the last reference get put in rpc_release task and gets queued to a workqueue. In this situation, the last open context reference may be put by the COMMIT release instead of the close() syscall. The close() syscall returns too quickly and the unlink runs while the d_count is still high since the COMMIT release hasn't put its dentry reference yet. Fix this by having rpc_commit_rpcsetup wait for the RPC call to complete before putting the task reference when FLUSH_SYNC is set. With this, the last reference is put by the process that's initiating the FLUSH_SYNC commit and the race is closed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Although they run as rpciod background tasks, under normal operation (i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck() and nfs4_do_close() want to be fully synchronous. This means that when we exit, we want all references to the rpc_task to be gone, and we want any dentry references etc. held by that task to be released. For this reason these functions call __rpc_wait_for_completion_task(), followed by rpc_put_task() in the expectation that the latter will be releasing the last reference to the rpc_task, and thus ensuring that the callback_ops->rpc_release() has been called synchronously. This patch fixes a race which exists due to the fact that rpciod calls rpc_complete_task() (in order to wake up the callers of __rpc_wait_for_completion_task()) and then subsequently calls rpc_put_task() without ensuring that these two steps are done atomically. In order to avoid adding new spin locks, the patch uses the existing waitqueue spin lock to order the rpc_task reference count releases between the waiting process and rpciod. The common case where nobody is waiting for completion is optimised for by checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task reference count is 1: in those cases we drop trying to grab the spin lock, and immediately free up the rpc_task. Those few processes that need to put the rpc_task from inside an asynchronous context and that do not care about ordering are given a new helper: rpc_put_task_async(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 3月, 2011 2 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: mailbox: resolve hang issue OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver arm: mach-omap2: smartreflex: fix another memory leak
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape: deadlock on system work queue [S390] keyboard: integer underflow bug [S390] xpram: remove __initdata attribute from module parameters
-
- 07 3月, 2011 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't set to D3 in Cirrus errata init verbs ALSA: hda - add new Fermi 5xx codec IDs to snd-hda ASoC: WM8994: Ensure late enable events are processed for the ADCs ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly ASoC: Fix WM9081 platform data initialisation ALSA: hda - Fix unable to record issue on ASUS N82JV ALSA: HDA: Realtek: Fixup jack detection to input subsystem
-
由 Amit Shah 提交于
If a virtio-console device gets unplugged while a port is open, a subsequent close() call on the port accesses vqs to free up buffers. This can lead to a crash. The buffers are already freed up as a result of the call to unplug_ports() from virtcons_remove(). The fix is to simply not access vq information if port->portdev is NULL. Reported-by: Njuzhang <juzhang@redhat.com> CC: stable@kernel.org Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 3月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: no .snap inside of snapped namespace libceph: fix msgr standby handling libceph: fix msgr keepalive flag libceph: fix msgr backoff libceph: retry after authorization failure libceph: fix handling of short returns from get_user_pages ceph: do not clear I_COMPLETE from d_release ceph: do not set I_COMPLETE Revert "ceph: keep reference to parent inode on ceph_dentry"
-
- 05 3月, 2011 6 次提交
-
-
由 Andi Kleen 提交于
Pass down the correct node for a transparent hugepage allocation. Most callers continue to use the current node, however the hugepaged daemon now uses the previous node of the first to be collapsed page instead. This ensures that khugepaged does not mess up local memory for an existing process which uses local policy. The choice of node is somewhat primitive currently: it just uses the node of the first page in the pmd range. An alternative would be to look at multiple pages and use the most popular node. I used the simplest variant for now which should work well enough for the case of all pages being on the same node. [akpm@linux-foundation.org: coding-style fixes] Acked-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
This makes a difference for LOCAL policy, where the node cannot be determined from the policy itself, but has to be gotten from the original page. Acked-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Add a alloc_page_vma_node that allows passing the "local" node in. Used in a followon patch. Acked-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Currently alloc_pages_vma() always uses the local node as policy node for the LOCAL policy. Pass this node down as an argument instead. No behaviour change from this patch, but will be needed for followons. Acked-by: NAndrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-