Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 19 1月, 2016 1 次提交
  3. 28 10月, 2015 1 次提交
    • A
      efi: Use correct type for struct efi_memory_map::phys_map · 44511fb9
      由 Ard Biesheuvel 提交于 
      We have been getting away with using a void* for the physical
address of the UEFI memory map, since, even on 32-bit platforms
with 64-bit physical addresses, no truncation takes place if the
memory map has been allocated by the firmware (which only uses
1:1 virtually addressable memory), which is usually the case.

However, commit:

  0f96a99d ("efi: Add "efi_fake_mem" boot option")

adds code that clones and modifies the UEFI memory map, and the
clone may live above 4 GB on 32-bit platforms.

This means our use of void* for struct efi_memory_map::phys_map has
graduated from 'incorrect but working' to 'incorrect and
broken', and we need to fix it.

So redefine struct efi_memory_map::phys_map as phys_addr_t, and
get rid of a bunch of casts that are now unneeded.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: linux-efi@vger.kernel.org
Cc: matt.fleming@intel.com
Link: http://lkml.kernel.org/r/1445593697-1342-1-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      44511fb9
  5. 12 10月, 2015 2 次提交
  7. 01 10月, 2015 1 次提交
    • M
      x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down · a5caa209
      由 Matt Fleming 提交于 
      Beginning with UEFI v2.5 EFI_PROPERTIES_TABLE was introduced
that signals that the firmware PE/COFF loader supports splitting
code and data sections of PE/COFF images into separate EFI
memory map entries. This allows the kernel to map those regions
with strict memory protections, e.g. EFI_MEMORY_RO for code,
EFI_MEMORY_XP for data, etc.

Unfortunately, an unwritten requirement of this new feature is
that the regions need to be mapped with the same offsets
relative to each other as observed in the EFI memory map. If
this is not done crashes like this may occur,

  BUG: unable to handle kernel paging request at fffffffefe6086dd
  IP: [<fffffffefe6086dd>] 0xfffffffefe6086dd
  Call Trace:
   [<ffffffff8104c90e>] efi_call+0x7e/0x100
   [<ffffffff81602091>] ? virt_efi_set_variable+0x61/0x90
   [<ffffffff8104c583>] efi_delete_dummy_variable+0x63/0x70
   [<ffffffff81f4e4aa>] efi_enter_virtual_mode+0x383/0x392
   [<ffffffff81f37e1b>] start_kernel+0x38a/0x417
   [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c
   [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef

Here 0xfffffffefe6086dd refers to an address the firmware
expects to be mapped but which the OS never claimed was mapped.
The issue is that included in these regions are relative
addresses to other regions which were emitted by the firmware
toolchain before the "splitting" of sections occurred at
runtime.

Needless to say, we don't satisfy this unwritten requirement on
x86_64 and instead map the EFI memory map entries in reverse
order. The above crash is almost certainly triggerable with any
kernel newer than v3.13 because that's when we rewrote the EFI
runtime region mapping code, in commit d2f7cbe7 ("x86/efi:
Runtime services virtual mapping"). For kernel versions before
v3.13 things may work by pure luck depending on the
fragmentation of the kernel virtual address space at the time we
map the EFI regions.

Instead of mapping the EFI memory map entries in reverse order,
where entry N has a higher virtual address than entry N+1, map
them in the same order as they appear in the EFI memory map to
preserve this relative offset between regions.

This patch has been kept as small as possible with the intention
that it should be applied aggressively to stable and
distribution kernels. It is very much a bugfix rather than
support for a new feature, since when EFI_PROPERTIES_TABLE is
enabled we must map things as outlined above to even boot - we
have no way of asking the firmware not to split the code/data
regions.

In fact, this patch doesn't even make use of the more strict
memory protections available in UEFI v2.5. That will come later.
Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chun-Yi <jlee@suse.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443218539-7610-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a5caa209
  9. 11 9月, 2015 1 次提交
    • D
      kexec: split kexec_load syscall from kexec core code · 2965faa5
      由 Dave Young 提交于 
      There are two kexec load syscalls, kexec_load another and kexec_file_load.
 kexec_file_load has been splited as kernel/kexec_file.c.  In this patch I
split kexec_load syscall code to kernel/kexec.c.

And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.

The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled.  But kexec-tools use
kexec_load syscall can bypass the checking.

Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel.  KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.

Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig.  Also updated general kernel code with to
kexec_load syscall.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2965faa5
  11. 08 8月, 2015 2 次提交
  13. 31 7月, 2015 1 次提交
    • R
      efi: Check for NULL efi kernel parameters · 9115c758
      由 Ricardo Neri 提交于 
      Even though it is documented how to specifiy efi parameters, it is
possible to cause a kernel panic due to a dereference of a NULL pointer when
parsing such parameters if "efi" alone is given:

PANIC: early exception 0e rip 10:ffffffff812fb361 error 0 cr2 0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc1+ #450
[ 0.000000]  ffffffff81fe20a9 ffffffff81e03d50 ffffffff8184bb0f 00000000000003f8
[ 0.000000]  0000000000000000 ffffffff81e03e08 ffffffff81f371a1 64656c62616e6520
[ 0.000000]  0000000000000069 000000000000005f 0000000000000000 0000000000000000
[ 0.000000] Call Trace:
[ 0.000000]  [<ffffffff8184bb0f>] dump_stack+0x45/0x57
[ 0.000000]  [<ffffffff81f371a1>] early_idt_handler_common+0x81/0xae
[ 0.000000]  [<ffffffff812fb361>] ? parse_option_str+0x11/0x90
[ 0.000000]  [<ffffffff81f4dd69>] arch_parse_efi_cmdline+0x15/0x42
[ 0.000000]  [<ffffffff81f376e1>] do_early_param+0x50/0x8a
[ 0.000000]  [<ffffffff8106b1b3>] parse_args+0x1e3/0x400
[ 0.000000]  [<ffffffff81f37a43>] parse_early_options+0x24/0x28
[ 0.000000]  [<ffffffff81f37691>] ? loglevel+0x31/0x31
[ 0.000000]  [<ffffffff81f37a78>] parse_early_param+0x31/0x3d
[ 0.000000]  [<ffffffff81f3ae98>] setup_arch+0x2de/0xc08
[ 0.000000]  [<ffffffff8109629a>] ? vprintk_default+0x1a/0x20
[ 0.000000]  [<ffffffff81f37b20>] start_kernel+0x90/0x423
[ 0.000000]  [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000]  [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef
[ 0.000000] RIP 0xffffffff81ba2efc

This panic is not reproducible with "efi=" as this will result in a non-NULL
zero-length string.

Thus, verify that the pointer to the parameter string is not NULL. This is
consistent with other parameter-parsing functions which check for NULL pointers.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      9115c758
  15. 25 6月, 2015 1 次提交
  17. 28 5月, 2015 1 次提交
    • D
      e820, efi: add ACPI 6.0 persistent memory types · ad5fb870
      由 Dan Williams 提交于 
      ACPI 6.0 formalizes e820-type-7 and efi-type-14 as persistent memory.
Mark it "reserved" and allow it to be claimed by a persistent memory
device driver.

This definition is in addition to the Linux kernel's existing type-12
definition that was recently added in support of shipping platforms with
NVDIMM support that predate ACPI 6.0 (which now classifies type-12 as
OEM reserved).

Note, /proc/iomem can be consulted for differentiating legacy
"Persistent Memory (legacy)" E820_PRAM vs standard "Persistent Memory"
E820_PMEM.

Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      ad5fb870
  19. 01 5月, 2015 1 次提交
  21. 01 4月, 2015 3 次提交
  23. 24 2月, 2015 1 次提交
  25. 13 2月, 2015 1 次提交
    • M
      x86/efi: Avoid triple faults during EFI mixed mode calls · 96738c69
      由 Matt Fleming 提交于 
      Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.
Reported-by: NAndy Lutomirski <luto@amacapital.net>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      96738c69
  27. 12 11月, 2014 1 次提交
  29. 04 10月, 2014 10 次提交
    • M
      x86/efi: Mark initialization code as such · 4e78eb05
      由 Mathias Krause 提交于 
      The 32 bit and 64 bit implementations differ in their __init annotations
for some functions referenced from the common EFI code. Namely, the 32
bit variant is missing some of the __init annotations the 64 bit variant
has.

To solve the colliding annotations, mark the corresponding functions in
efi_32.c as initialization code, too -- as it is such.

Actually, quite a few more functions are only used during initialization
and therefore can be marked __init. They are therefore annotated, too.
Also add the __init annotation to the prototypes in the efi.h header so
users of those functions will see it's meant as initialization code
only.

This patch also fixes the "prelog" typo. ("prologue" / "epilogue" might
be more appropriate but this is C code after all, not an opera! :D)
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      4e78eb05
    • M
      x86/efi: Update comment regarding required phys mapped EFI services · 0ce4605c
      由 Mathias Krause 提交于 
      Commit 3f4a7836 ("x86/efi: Rip out phys_efi_get_time()") left
set_virtual_address_map as the only runtime service needed with a
phys mapping but missed to update the preceding comment. Fix that.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      0ce4605c
    • M
      x86/efi: Unexport add_efi_memmap variable · 60920685
      由 Mathias Krause 提交于 
      This variable was accidentally exported, even though it's only used in
this compilation unit and only during initialization.

Remove the bogus export, make the variable static instead and mark it
as __initdata.

Fixes: 200001eb ("x86 boot: only pick up additional EFI memmap...")
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      60920685
    • L
      x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format() · ace1d121
      由 Laszlo Ersek 提交于 
      An example log excerpt demonstrating the change:

Before the patch:

> efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: type=2, attr=0xf, range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: type=10, attr=0xf, range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: type=7, attr=0xf, range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: type=10, attr=0xf, range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: type=4, attr=0xf, range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: type=2, attr=0xf, range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: type=7, attr=0xf, range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: type=4, attr=0xf, range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: type=7, attr=0xf, range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: type=2, attr=0xf, range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: type=3, attr=0xf, range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: type=6, attr=0x800000000000000f, range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: type=5, attr=0x800000000000000f, range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: type=6, attr=0x800000000000000f, range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: type=3, attr=0xf, range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: type=6, attr=0x800000000000000f, range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: type=10, attr=0xf, range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: type=6, attr=0x800000000000000f, range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: type=5, attr=0x800000000000000f, range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: type=7, attr=0xf, range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: type=4, attr=0xf, range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: type=7, attr=0xf, range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: type=3, attr=0xf, range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: type=5, attr=0x800000000000000f, range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: type=6, attr=0x800000000000000f, range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: type=7, attr=0xf, range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: type=9, attr=0xf, range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: type=10, attr=0xf, range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: type=4, attr=0xf, range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: type=6, attr=0x800000000000000f, range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: type=7, attr=0xf, range=[0x0000000007ff0000-0x0000000008000000) (0MB)

After the patch:

> efi: mem00: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: [ACPI Reclaim Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ff0000-0x0000000008000000) (0MB)

Both the type enum and the attribute bitmap are decoded, with the
additional benefit that the memory ranges line up as well.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      ace1d121
    • D
      x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode · a5a750a9
      由 Dave Young 提交于 
      If enter virtual mode failed due to some reason other than the efi call
the EFI_RUNTIME_SERVICES bit in efi.flags should be cleared thus users
of efi runtime services can check the bit and handle the case instead of
assume efi runtime is ok.

Per Matt, if efi call SetVirtualAddressMap fails we will be not sure
it's safe to make any assumptions about the state of the system. So
kernel panics instead of clears EFI_RUNTIME_SERVICES bit.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      a5a750a9
    • D
      efi: Add kernel param efi=noruntime · 5ae3683c
      由 Dave Young 提交于 
      noefi kernel param means actually disabling efi runtime, Per suggestion
from Leif Lindholm efi=noruntime should be better. But since noefi is
already used in X86 thus just adding another param efi=noruntime for
same purpose.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5ae3683c
    • D
      lib: Add a generic cmdline parse function parse_option_str · 6ccc72b8
      由 Dave Young 提交于 
      There should be a generic function to parse params like a=b,c
Adding parse_option_str in lib/cmdline.c which will return true
if there's specified option set in the params.

Also updated efi=old_map parsing code to use the new function
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      6ccc72b8
    • D
      efi: Move noefi early param code out of x86 arch code · b2e0a54a
      由 Dave Young 提交于 
      noefi param can be used for arches other than X86 later, thus move it
out of x86 platform code.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      b2e0a54a
    • J
      efi-bgrt: Add error handling; inform the user when ignoring the BGRT · 1282278e
      由 Josh Triplett 提交于 
      Gracefully handle failures to allocate memory for the image, which might
be arbitrarily large.

efi_bgrt_init can fail in various ways as well, usually because the
BIOS-provided BGRT structure does not match expectations.  Add
appropriate error messages rather than failing silently.
Reported-by: NSrihari Vijayaraghavan <linux.bug.reporting@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81321Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      1282278e
    • M
      efi: Add efi= parameter parsing to the EFI boot stub · 5a17dae4
      由 Matt Fleming 提交于 
      We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5a17dae4
  31. 19 7月, 2014 7 次提交
  33. 08 7月, 2014 1 次提交
  35. 19 6月, 2014 2 次提交
    • M
      x86/efi: Use early_memunmap() to squelch sparse errors · 98a716b6
      由 Matt Fleming 提交于 
      The kbuild reports the following sparse errors,

>> arch/x86/platform/efi/quirks.c:242:23: sparse: incorrect type in >> argument 1 (different address spaces)
   arch/x86/platform/efi/quirks.c:242:23:    expected void [noderef] <asn:2>*addr
   arch/x86/platform/efi/quirks.c:242:23:    got void *[assigned] tablep
>> arch/x86/platform/efi/quirks.c:245:23: sparse: incorrect type in >> argument 1 (different address spaces)
   arch/x86/platform/efi/quirks.c:245:23:    expected void [noderef] <asn:2>*addr
   arch/x86/platform/efi/quirks.c:245:23:    got struct efi_setup_data *[assigned] data

Dave Young had made previous attempts to convert the early_iounmap()
calls to early_memunmap() but ran into merge conflicts with commit
9e5c33d7 ("mm: create generic early_ioremap() support").

Now that we've got that commit in place we can switch to using
early_memunmap() since we're already using early_memremap() in
efi_reuse_config().

Cc: Dave Young <dyoung@redhat.com>
Cc: Saurabh Tangri <saurabh.tangri@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      98a716b6
    • S
      x86/efi: Move all workarounds to a separate file quirks.c · eeb9db09
      由 Saurabh Tangri 提交于 
      Currently, it's difficult to find all the workarounds that are
applied when running on EFI, because they're littered throughout
various code paths. This change moves all of them into a separate
file with the hope that it will be come the single location for all
our well documented quirks.
Signed-off-by: NSaurabh Tangri <saurabh.tangri@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      eeb9db09
  37. 02 6月, 2014 1 次提交
  39. 03 5月, 2014 1 次提交
    • D
      x86/efi: earlyprintk=efi,keep fix · 5f35eb0e
      由 Dave Young 提交于 
      earlyprintk=efi,keep will cause kernel hangs while freeing initmem like
below:

  VFS: Mounted root (ext4 filesystem) readonly on device 254:2.
  devtmpfs: mounted
  Freeing unused kernel memory: 880K (ffffffff817d4000 - ffffffff818b0000)

It is caused by efi earlyprintk use __init function which will be freed
later.  Such as early_efi_write is marked as __init, also it will use
early_ioremap which is init function as well.

To fix this issue, I added early initcall early_efi_map_fb which maps
the whole efi fb for later use. OTOH, adding a wrapper function
early_efi_map which calls early_ioremap before ioremap is available.

With this patch applied efi boot ok with earlyprintk=efi,keep console=efi
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5f35eb0e