Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This adds a driver for the the 2D graphics accelerator found on PXA3xx
processors. Only resource mapping, interrupt handling and a simple ioctl
handler is done by the kernel part, the rest of the logic is implemented
in DirectFB userspace.

Graphic applications greatly benefit for line drawing, blend, and
rectangle and triangle filling operations.

Benchmarks done on a PXA303 using the df_dok benchmarking tool follow,
where the value in square brackets show the CPU usage during that test.

Without accelerator (benchmarking 256x252 on 480x262 RGB16 (16bit)):

  Anti-aliased Text                              3.016 secs (   65.649 KChars/sec) [ 99.6%]
  Fill Rectangle                                 3.021 secs (  175.107 MPixel/sec) [ 98.0%]
  Fill Rectangle (blend)                         3.582 secs (    3.602 MPixel/sec) [ 99.7%]
  Fill Rectangles [10]                           3.177 secs (  182.753 MPixel/sec) [ 98.1%]
  Fill Rectangles [10] (blend)                  18.020 secs (    3.580 MPixel/sec) [ 98.7%]
  Fill Spans                                     3.019 secs (  145.306 MPixel/sec) [ 98.0%]
  Fill Spans (blend)                             3.616 secs (    3.568 MPixel/sec) [ 99.4%]
  Blit                                           3.074 secs (   39.874 MPixel/sec) [ 98.0%]
  Blit 180                                       3.020 secs (   32.042 MPixel/sec) [ 98.0%]
  Blit with format conversion                    3.005 secs (   19.321 MPixel/sec) [ 99.6%]
  Blit from 32bit (blend)                        4.792 secs (    2.692 MPixel/sec) [ 98.7%]

With accelerator:

  Anti-aliased Text                              3.056 secs (*  36.518 KChars/sec) [ 21.3%]
  Fill Rectangle                                 3.015 secs (* 115.543 MPixel/sec) [  8.9%]
  Fill Rectangle (blend)                         3.180 secs (*  20.286 MPixel/sec) [  1.8%]
  Fill Rectangles [10]                           3.251 secs (* 119.062 MPixel/sec) [  1.2%]
  Fill Rectangles [10] (blend)                   6.293 secs (*  20.502 MPixel/sec) [  0.3%]
  Fill Spans                                     3.051 secs (*  97.264 MPixel/sec) [ 35.7%]
  Fill Spans (blend)                             3.377 secs (*  15.282 MPixel/sec) [ 17.8%]
  Blit                                           3.046 secs (*  27.533 MPixel/sec) [  2.6%]
  Blit 180                                       3.098 secs (*  27.070 MPixel/sec) [  2.2%]
  Blit with format conversion                    3.131 secs (*  39.148 MPixel/sec) [  2.8%]
  Blit from 32bit (blend)                        3.346 secs (*  11.568 MPixel/sec) [  0.8%]
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Tested-by: NSven Neumann <s.neumann@raumfeld.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Denis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NZhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NZhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This is important because on PXA3xx, the physical mapping of SMEMC registers
differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx
and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use
__raw_read/__raw_write.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish
between PXA25x/PXA27x and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io()
and pxa3xx_map_io() is included.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The camera registers start and range are encoded into the platform
device, and are actually handled by ioremap()'ed, thus the mapping
in pxa_map_io() is not necessary.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix typo which broke '..' detection in ext4_find_entry()
  ext4: Turn off multiple page-io submission by default

Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where
this is being used to specify array sizes.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Miller <davem@davemloft.net>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MSM main git tree has changed over to this new address.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.

bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.

  $ uname -m
  x86_64
  $ cat /proc/sys/vm/mmap_min_addr
  65536
  $ cat install_special_mapping.s
  section .bss
      resb BSS_SIZE
  section .text
      global _start
      _start:
          mov     eax, __NR_pause
          int     0x80
  $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
  $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
  $ ./install_special_mapping &
  [1] 14303
  $ cat /proc/14303/maps
  0000f000-00010000 r-xp 00000000 00:00 0                                  [vdso]
  00010000-00011000 r-xp 00001000 00:19 2453665                            /home/taviso/install_special_mapping
  00011000-ffffe000 rwxp 00000000 00:00 0                                  [stack]

It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: NTavis Ormandy <taviso@google.com>
Acked-by: NKees Cook <kees@ubuntu.com>
Acked-by: NRobert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing header file:

arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR'
arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: It is likely that WORKER_NOT_RUNNING is true
  MAINTAINERS: Add workqueue entry
  workqueue: check the allocation of system_unbound_wq

* 'for-linus' of git://neil.brown.name/md:
  md: protect against NULL reference when waiting to start a raid10.
  md: fix bug with re-adding of partially recovered device.
  md: fix possible deadlock in handling flush requests.
  md: move code in to submit_flushes.
  md: remove handling of flush_pending in md_submit_flush_data

There is a possibility that the last word of a transaction will be lost
if data is not ready.  Re-read in poll_transfer() to solve this issue
when poll_mode is enabled.

Verified on SPI touch screen device.
Signed-off-by: NMajor Lee <major_lee@wistron.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This gets caught by the new sanity check code. Instead of the slash use a
different symbol. This was originally found by Major Lee who proposed a
rather more complex patch which changed the name according to the chip
type.

On the basis that we are in a late -rc and making Linus grumpy isn't always
a good idea (however fun) this is a simple alternative.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There should be a check for the NUL character instead of '0'.

Fortunately the only thing that cares about this is NFS serving, which
is why we didn't notice this in the merge window testing.
Reported-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: wire up accept4 syscall (non-multiplexed path)
  sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers.

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks
  OMAP2+: PM/serial: fix console semaphore acquire during suspend
  OMAP1: SRAM: fix size for OMAP1611 SoCs
  arm: omap2: io: fix clk_get() error check
  arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check
  omap: nand: remove hardware ECC as default
  omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD
  omap: PM debug: fix wake-on-timer debugfs dependency

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
  ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
  ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
  Change bcmring Maintainer list.
  ARM: Update mach-types
  ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
  ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7
  ARM: pxa/palm: fix ifdef around gen_nand driver registration
  ARM: pxa: fix pxa2xx-flash section mismatch
  ARM: mmp2: remove not used clk_rtc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Write to prom console using indirect buffer.
  sparc: Delete prom_*getchar().
  sparc: Pass buffer pointer all the way down to prom_{get,put}char().
  sparc: Do not export prom_nb{get,put}char().
  sparc64: Delete prom_setcallback().
  sparc64: Unexport prom_service_exists().
  sparc: Kill prom devops_{32,64}.c
  sparc: Remove prom_pathtoinode()
  sparc64: Delete prom_puts() unused.
  SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits)
  pppoe.c: Fix kernel panic caused by __pppoe_xmit
  WAN: Fix a TX IRQ causing BUG() in PC300 and PCI200SYN drivers.
  bnx2x: Advance a version number to 1.60.01-0
  bnx2x: Fixed a compilation warning
  bnx2x: LSO code was broken on BE platforms
  qlge: Fix deadlock when cancelling worker.
  net: fix skb_defer_rx_timestamp()
  cxgb4vf: Ingress Queue Entry Size needs to be 64 bytes
  phy: add the IC+ IP1001 driver
  atm: correct sysfs 'device' link creation and parent relationships
  MAINTAINERS: remove me from tulip
  SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address
  enic: Bug Fix: Pass napi reference to the isr that services receive queue
  ipv6: fix nl group when advertising a new link
  connector: add module alias
  net: Document the kernel_recvmsg() function
  r8169: Fix runtime power management
  hso: IP checksuming doesn't work on GE0301 option cards
  xfrm: Fix xfrm_state_migrate leak
  net: Convert netpoll blocking api in bonding driver to be a counter
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] hpsa: fix redefinition of PCI_DEVICE_ID_CISSF
  [SCSI] qla2xxx: Update version number to 8.03.05-k0.
  [SCSI] qla2xxx: Properly set the return value in qla2xxx_eh_abort function.
  [SCSI] qla2xxx: Correct issue where NPIV-config data was not being allocated for 82xx parts.
  [SCSI] qla2xxx: Change MSI initialization from using incorrect request_irq parameter.
  [SCSI] qla2xxx: Populate Command Type 6 LUN field properly.
  [SCSI] zfcp: Issue FCP command without holding SCSI host_lock
  [SCSI] zfcp: Prevent usage w/o holding a reference
  [SCSI] zfcp: No ERP escalation on gpn_ft eval
  [SCSI] zfcp: Correct false abort data assignment.
  [SCSI] zfcp: Fix common FCP request reception
  [SCSI] Eliminate error handler overload of the SCSI serial number
  [SCSI] pmcraid: disable msix and expand device config entry
  [SCSI] bsg: correct fault if queue object removed while dev_t open
  [SCSI] osd: checking NULL instead of ERR_PTR()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdboc,input: Fix regression with keyboard release key and early debugging

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / PM: Do not save/restore NVS on Sony Vaio VGN-NW130D
  ACPI/HEST: adjust section selection
  ACPI: eliminate unused variable warning for !ACPI_SLEEP
  ACPI/PNP: avoid section mismatch warning
  ACPI thermal: remove two unused functions
  ACPI: fix a section mismatch
  ACPI, APEI, use raw spinlock in ERST
  ACPI: video: fix build for CONFIG_ACPI=n
  ACPI: video: fix build for VIDEO_OUTPUT_CONTROL=n
  ACPI: fix allowing to add/remove multiple _OSI strings
  acpi: fix _OSI string setup regression
  ACPI: EC: Add another dmi match entry for MSI hardware
  ACPI battery: update status upon sysfs query
  ACPI ac: update AC status upon sysfs query
  ACPI / PM: Do not refcount power resources that can't be turned on
  ACPI / PM: Check device state before refcounting power resources

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: recognize ARAT on WSM-EX

Cache ownership must be acquired by reading/writing data from the
cache line to make cache operation have the desired effect on the
SMP MPCore CPU. However, the ownership is never acquired in the
v6_dma_inv_range function when cleaning the first line and
flushing the last one, in case the address is not aligned
to D_CACHE_LINE_SIZE boundary.
Fix this by reading/writing data if needed, before performing
cache operations.
While at it, fix v6_dma_flush_range to prevent RWFO outside
the buffer.

Cc: stable@kernel.org
Signed-off-by: NValentine Barshak <vbarshak@mvista.com>
Signed-off-by: NGeorge G. Davis <gdavis@mvista.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Because the nwfpe support is unlikely to be used on new platforms
and requires CONFIG_OABI_COMPAT, which is not generally used with
ARMv7+, we shouldn't expect to build nwfpe support into a Thumb-2
kernel.

At present, nwfpe contains assembly code which isn't Thumb-2
compatible, and for now it doesn't appear useful to port this
code.

All ARMv7-A/R platforms necessarily have VFPv3 hardware floating-
point natively, making emulation unnecessary.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This makes sense, because Thumb-2 code can't execute on plain
ARMv6 processors.

This will avoid accidentally configuring a broken kernel where the
config otherwise would allow multiple architecture versions to
coexist in the same kernel.

Not adding !CPU_V5 etc., because the chance of anyone trying to
put v5 and v7 in the same kernel is low, and I'm not aware of
any mach which can do this.  These could be added later if it
matters.

Note that the rules may need to be refined if support for the
ARM1156J(F)-S processor is later added to the kernel, since this
processor supports the rare ARMv6T2 extensions, which add support
for Thumb-2 and a few other ARMv7 features.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

I am Jiandong Zheng working on BCMRING in Broadcom Canada Ltd. I am
replacing Leo Chen (leochen@broadcom.com) as "ARM/BCMRING ARM
ARCHITECTURE" and "ARM/BCMRING MTD NAND DRIVER" maintainer from
Broadcom as he is no longer the maintainer of these components.
Signed-off-by: NJiandong Zheng <jdzheng@broadcom.com>
Acked-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  fbdev: Fix fb_find_nearest_mode refresh comparison

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ltc4215) make sysfs file match the alarm cause

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: at_hdmac: fix buffer transfer size specification
  fsldma: fix issue of slow dma
  dmaengine i.MX SDMA: initialize on module_init
  dma : EG20T PCH: Fix miss-setting DMA descriptor
  intel_mid_dma: fix section mismatch warnings
  dmaengine: imx-sdma: fix bug in buffer descriptor initialization
  drivers/dma/ppc4xx: Use printf extension %pR for struct resource
  drivers/dma/ioat: Use the ccflag-y instead of EXTRA_CFLAGS
  drivers/dma/: Use the ccflag-y instead of EXTRA_CFLAGS
  dma: intel_mid_dma: fix double free on mid_setup_dma error path
  dma: imx-dma: fix imxdma_probe error path

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/uverbs: Handle large number of entries in poll CQ