1. 10 9月, 2013 2 次提交
    • N
      iscsi-target: Add login negotiation multi-plexing support · d381a801
      Nicholas Bellinger 提交于
      This patch adds support for login negotiation multi-plexing in
      iscsi-target code.
      
      This involves handling the first login request PDU + payload and
      login response PDU + payload within __iscsi_target_login_thread()
      process context, and then changing struct sock->sk_data_ready()
      so that all subsequent exchanges are handled by workqueue process
      context, to allow other incoming login requests to be received
      in parallel by __iscsi_target_login_thread().
      
      Upon login negotiation completion (or failure), ->sk_data_ready()
      is replaced with the original kernel sockets handler saved in
      iscsi_conn->orig_data_ready.
      
      v3 changes:
        - Convert iscsi_target_sk_data_ready() lock access to
          write[lock,unlock]_bh()
        - Only clear LOGIN_FLAGS_READ_ACTIVE when iscsi_target_do_login()
          returns zero
        - Add LOGIN_FLAGS_READY + LOGIN_FLAGS_CLOSED bit checks to
          iscsi_target_sk_data_ready()
        - Make INIT_DELAYED_WORK() + iscsi_target_set_sock_callbacks() setup
          happen earlier by moving from iscsi_target_start_negotiation() into
          iscsi_target_locate_portal()
        - Set LOGIN_FLAGS_READY bit in iscsi_target_start_negotiation()
          after iscsi_target_do_login() returns zero.
      
      v2 changes:
        - Add login_timer in iscsi_target_do_login_rx() to avoid
          possible endless sleep with MSG_WAITALL for traditional
          iscsi-target in certain network configurations.
        - Convert lprintk() -> pr_debug()
        - Remove forward declarations of iscsi_target_set_sock_callbacks(),
          iscsi_target_restore_sock_callbacks() and iscsi_target_sk_data_ready()
        - Make iscsi_target_set_sock_callbacks + iscsi_target_restore_sock_callbacks()
          static (Fengguang)
        - Make iscsi_target_do_login_rx() safe for iser-target w/o conn->sock
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      d381a801
    • N
      iscsi-target: Prepare login code for multi-plexing support · a91eb7d9
      Nicholas Bellinger 提交于
      This patch prepares the iscsi-target login code for multi-plexing
      support.  This includes:
      
       - Adding iscsi_tpg_np->tpg_np_kref + iscsit_login_kref_put() for
         handling callback of iscsi_tpg_np->tpg_np_comp
       - Adding kref_put() in iscsit_deaccess_np()
       - Adding kref_put() and wait_for_completion() in
         iscsit_reset_np_thread()
       - Refactor login failure path release logic into
         iscsi_target_login_sess_out()
       - Update __iscsi_target_login_thread() to handle
         iscsi_post_login_handler() asynchronous completion
       - Add shutdown parameter for iscsit_clear_tpg_np_login_thread*()
      
      v3 changes:
       - Convert iscsi_portal_group->np_login_lock to ->np_login_sem
       - Add LOGIN_FLAGS definitions
      
      v2 changes:
       - Remove duplicate call to iscsi_post_login_handler() in
         __iscsi_target_login_thread()
       - Drop unused iscsi_np->np_login_tpg
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      a91eb7d9
  2. 13 8月, 2013 3 次提交
    • C
      iscsi-target: ST response on IN6ADDR_ANY socket · dfecf611
      Chris Leech 提交于
      Odd little issue, found that if you create an IPv6 portal bound to the
      IN6ADDR_ANY wildcard address it will accept IPv4 connections (as long as
      bindv6only isn't set globally) but respond to SendTargets requests with
      an IPv4-mapped IPv6 address.
      
      Example over loopback:
      
       In targetcli create a wildcard IPv6 portal
         /iscsi/iqn.../portals/> create ::
       Which should create a portal [::]:3260
      
       Initiate SendTargets discovery to the portal using an IPv4 address
         # iscsiadm -m discovery -t st -p 127.0.0.1
       The response formats TargetAddress as [::ffff:127.0.0.1]:3260,1
      
      This still works and uses v4 on the network between two v6 sockets, but
      only if the initiator supports IPv6 with v4-mapped addresses.
      
      This change detects v4-mapped address on v6 sockets for the wildcard
      case, and instead formats the TargetAddress response as an IPv4 address.
      
      In order to not further complicate iscsit_build_sendtargets_response,
      I've actually simplified it by moving the bracket wrapping of IPv6
      address into iscsit_accept_np where local_ip and login_ip strings are
      set.  That also simplifies iscsi_stat_tgt_attr_show_attr_fail_intr_addr.
      
      Side effect of the string format change is that
      lio_target_nacl_show_info will now print login_ip bracket wrapped for
      IPv6 connections, as will a few debug prints.
      Signed-off-by: NChris Leech <cleech@redhat.com>
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      dfecf611
    • A
      target/qla2xxx: Make demo_mode_login_only modifiable · de04a8aa
      Andy Grover 提交于
      Changing this attribute to 0 will mean that all initiators that login
      to the target while the target has generate_node_acls=1 will see all
      TPG LUNs, which may be the desired behavior in some cases.
      
      (nab: Apply patch without macro changes)
      Reported-by: NCraig Watson <craig.watson@vanguard-rugged.com>
      Signed-off-by: NAndy Grover <agrover@redhat.com>
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      de04a8aa
    • J
      target: replace strict_strto*() with kstrto*() · 57103d7f
      Jingoo Han 提交于
      The usage of strict_strtoul() and strict_strtoull() is not preferred,
      because strict_strtoul() and strict_strtoull() are obsolete. Thus,
      kstrtoul() and kstrtoull() should be used.
      
      v2: Fix incorrect return in ft_add_tpg (Fengguang)
      Signed-off-by: NJingoo Han <jg1.han@samsung.com>
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      57103d7f
  3. 12 8月, 2013 5 次提交
    • L
      Linux 3.11-rc5 · d4e4ab86
      Linus Torvalds 提交于
      d4e4ab86
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · e5d081f4
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "This is three bug fixes: An fnic warning caused by sleeping under a
        lock, a major regression with our updated WRITE SAME/UNMAP logic which
        caused tons of USB devices (and one RAID card) to cease to function
        and a megaraid_sas firmware initialisation problem which causes kdump
        failures"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
        [SCSI] fnic: BUG: sleeping function called from invalid context during probe
        [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
      e5d081f4
    • L
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · 77f63b4d
      Linus Torvalds 提交于
      Pull powerpc fixes from Ben Herrenschmidt:
       "This includes small series from Michael Neuling to fix a couple of
        nasty remaining problems with the new Power8 support, also targeted at
        stable 3.10, without which some new userspace accessible registers
        aren't properly context switched, and in some case, can be clobbered
        by the user of transactional memory.
      
        Along with that, a few slightly more minor things, such as a missing
        Kconfig option to enable handling of denorm exceptions when not
        running under a hypervisor (or userspace will randomly crash when
        hitting denorms with the vector unit), some nasty bugs in the new
        pstore oops code, and other simple bug fixes worth having in now.
      
        Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to
        handle KVM bits while he is on vacation.  However I'll let him decide
        whether they should go to -stable or not when he is back"
      
      * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
        powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs
        powerpc: Save the TAR register earlier
        powerpc: Fix context switch DSCR on POWER8
        powerpc: Rework setting up H/FSCR bit definitions
        powerpc: Fix hypervisor facility unavaliable vector number
        powerpc/kvm/book3s_pr: Return appropriate error when allocation fails
        powerpc/kvm: Add signed type cast for comparation
        powerpc/eeh: Add missing procfs entry for PowerNV
        powerpc/pseries: Add backward compatibilty to read old kernel oops-log
        powerpc/pseries: Fix buffer overflow when reading from pstore
        powerpc: On POWERNV enable PPC_DENORMALISATION by default
      77f63b4d
    • L
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 30b229bd
      Linus Torvalds 提交于
      Pull s390 kvm fixes from Paolo Bonzini:
       "Two fixes for s390"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: s390: fix pfmf non-quiescing control handling
        KVM: s390: move kvm_guest_enter,exit closer to sie
      30b229bd
    • L
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 9e6bdaaa
      Linus Torvalds 提交于
      Pull i2c fixes from Wolfram Sang:
       "Some driver bugfixes for the I2C subsystem"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: mv64xxx: Document the newly introduced allwinner compatible
        i2c: Fix Kontron PLD prescaler calculation
        i2c: i2c-mxs: Use DMA mode even for small transfers
      9e6bdaaa
  4. 11 8月, 2013 6 次提交
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · d92581fc
      Linus Torvalds 提交于
      Pull btrfs fixes from Chris Mason:
       "These are assorted fixes, mostly from Josef nailing down xfstests
        runs.  Zach also has a long standing fix for problems with readdir
        wrapping f_pos (or ctx->pos)
      
        These patches were spread out over different bases, so I rebased
        things on top of rc4 and retested overnight"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
        btrfs: don't loop on large offsets in readdir
        Btrfs: check to see if root_list is empty before adding it to dead roots
        Btrfs: release both paths before logging dir/changed extents
        Btrfs: allow splitting of hole em's when dropping extent cache
        Btrfs: make sure the backref walker catches all refs to our extent
        Btrfs: fix backref walking when we hit a compressed extent
        Btrfs: do not offset physical if we're compressed
        Btrfs: fix extent buffer leak after backref walking
        Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents
        btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
      d92581fc
    • L
      Merge tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · b8ea0d06
      Linus Torvalds 提交于
      Pull NFS client bugfixes from Trond Myklebust:
      
       - Stable patch for lockd to fix Oopses due to inappropriate calls to
         utsname()->nodename
      
       - Stable patches for sunrpc to fix Oopses on shutdown when using
         AF_LOCAL sockets with rpcbind
      
       - Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint
      
       - Fix a regression with the sync mount option failing to work for nfs4
         mounts
      
       - Fix a writeback performance issue when doing cache invalidation
      
       - Remove an incorrect call to nfs_setsecurity in nfs_fhget
      
      * tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4: Fix up nfs4_proc_lookup_mountpoint
        NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget()
        NFSv4: Fix the sync mount option for nfs4 mounts
        NFS: Fix writeback performance issue on cache invalidation
        SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister
        SUNRPC: Don't auto-disconnect from the local rpcbind socket
        LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
      b8ea0d06
    • L
      Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux · 022e5d09
      Linus Torvalds 提交于
      Pull nfsd fixes from Bruce Fields:
       "Some fixes for a 4.1 feature that in retrospect probably should have
        waited for 3.12....  But it appears to be working now"
      
      * 'for-3.11' of git://linux-nfs.org/~bfields/linux:
        nfsd: Fix SP4_MACH_CRED negotiation in EXCHANGE_ID
        nfsd4: Fix MACH_CRED NULL dereference
      022e5d09
    • L
      Merge tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 1e24f76e
      Linus Torvalds 提交于
      Pull sound fixes from Takashi Iwai:
       "A couple of USB-audio fixes that should also go to stable kernels"
      
      * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: usb-audio: do not trust too-big wMaxPacketSize values
        ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
      1e24f76e
    • L
      Merge tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 8ae3f1d0
      Linus Torvalds 提交于
      Pull staging driver fixes from Greg KH:
       "Here are 3 small fixes for staging/IIO drivers for 3.11-rc5.  Nothing
        huge, two IIO driver fixes, and a zcache fix.  All of these have been
        in linux-next for a while"
      
      * tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: zcache: fix "zcache=" kernel parameter
        iio: ti_am335x_adc: Fix wrong samples received on 1st read
        iio:trigger: Fix use_count race condition
      8ae3f1d0
    • L
      Merge tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · e6e8ac44
      Linus Torvalds 提交于
      Pull USB fixes from Greg KH:
       "Here are 3 small USB fixes for 3.11-rc5.
      
        One is a fix that the ChromeOS developers ran into on some Intel
        hardware, one is a build fix, and the last is a MAINTAINERS update to
        help people figure out where to send USB network driver patches.
      
        All of these have been in linux-next for a while"
      
      * tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        MAINTAINERS: Add separate section for USB NETWORKING DRIVERS
        usb: xhci: add missing dma-mapping.h includes
        usb: core: don't try to reset_device() a port that got just disconnected
      e6e8ac44
  5. 10 8月, 2013 17 次提交
    • Z
      btrfs: don't loop on large offsets in readdir · db62efbb
      Zach Brown 提交于
      When btrfs readdir() hits the last entry it sets the readdir offset to a
      huge value to stop buggy apps from breaking when the same name is
      returned by readdir() with concurrent rename()s.
      
      But unconditionally setting the offset to INT_MAX causes readdir() to
      loop returning any entries with offsets past INT_MAX.  It only takes a
      few hours of constant file creation and removal to create entries past
      INT_MAX.
      
      So let's set the huge offset to LLONG_MAX if the last entry has already
      overflowed 32bit loff_t.   Without large offsets behaviour is identical.
      With large offsets 64bit apps will work and 32bit apps will be no more
      broken than they currently are if they see large offsets.
      Signed-off-by: NZach Brown <zab@redhat.com>
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      db62efbb
    • J
      Btrfs: check to see if root_list is empty before adding it to dead roots · cfad392b
      Josef Bacik 提交于
      A user reported a panic when running with autodefrag and deleting snapshots.
      This is because we could end up trying to add the root to the dead roots list
      twice.  To fix this check to see if we are empty before adding ourselves to the
      dead roots list.  Thanks,
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      cfad392b
    • J
      Btrfs: release both paths before logging dir/changed extents · f3b15ccd
      Josef Bacik 提交于
      The ceph guys tripped over this bug where we were still holding onto the
      original path that we used to copy the inode with when logging.  This is based
      on Chris's fix which was reported to fix the problem.  We need to drop the paths
      in two cases anyway so just move the drop up so that we don't have duplicate
      code.  Thanks,
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      f3b15ccd
    • J
      Btrfs: allow splitting of hole em's when dropping extent cache · ee20a983
      Josef Bacik 提交于
      I noticed while running multi-threaded fsync tests that sometimes fsck would
      complain about an improper gap.  This happens because we fail to add a hole
      extent to the file, which was happening when we'd split a hole EM because
      btrfs_drop_extent_cache was just discarding the whole em instead of splitting
      it.  So this patch fixes this by allowing us to split a hole em properly, which
      means that added holes actually get logged properly and we no longer see this
      fsck error.  Thankfully we're tolerant of these sort of problems so a user would
      not see any adverse effects of this bug, other than fsck complaining.  Thanks,
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      ee20a983
    • J
      Btrfs: make sure the backref walker catches all refs to our extent · ed8c4913
      Josef Bacik 提交于
      Because we don't mess with the offset into the extent for compressed we will
      properly find both extents for this case
      
      [extent a][extent b][rest of extent a]
      
      but because we already added a ref for the front half we won't add the inode
      information for the second half.  This causes us to leak that memory and not
      print out the other offset when we do logical-resolve.  So fix this by calling
      ulist_add_merge and then add our eie to the existing entry if there is one.
      With this patch we get both offsets out of logical-resolve.  With this and the
      other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo
      set.  Thanks,
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      ed8c4913
    • J
      Btrfs: fix backref walking when we hit a compressed extent · 8ca15e05
      Josef Bacik 提交于
      If you do btrfs inspect-internal logical-resolve on a compressed extent that has
      been partly overwritten it won't find anything.  This is because we try and
      match the extent offset we've searched for based on the extent offset in the
      data extent entry.  However this doesn't work for compressed extents because the
      offsets are for the uncompressed size, not the compressed size.  So instead only
      do this check if we are not compressed, that way we can get an actual entry for
      the physical offset rather than nothing for compressed.  Thanks,
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      8ca15e05
    • J
      Btrfs: do not offset physical if we're compressed · b76bb701
      Josef Bacik 提交于
      xfstest btrfs/276 was freaking out on slower boxes partly because fiemap was
      offsetting the physical based on the extent offset.  This is perfectly fine with
      uncompressed extents, however the extent offset is into the uncompressed area,
      not the compressed.  So we can return a physical value that isn't at all within
      the area we have allocated on disk.  Fix this by returning the start of the
      extent if it is compressed no matter what the offset.  Thanks,
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      b76bb701
    • L
      Btrfs: fix extent buffer leak after backref walking · b5b9b5b3
      Liu Bo 提交于
      commit 47fb091f(Btrfs: fix unlock after free on rewinded tree blocks)
      takes an extra increment on the reference of allocated dummy extent buffer, so now we
      cannot free this dummy one, and end up with extent buffer leak.
      Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      b5b9b5b3
    • L
      Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents · e68afa49
      Liu Bo 提交于
      For partial extents, snapshot-aware defrag does not work as expected,
      since
      a) we use the wrong logical offset to search for parents, which should be
         disk_bytenr + extent_offset, not just disk_bytenr,
      b) 'offset' returned by the backref walking just refers to key.offset, not
         the 'offset' stored in btrfs_extent_data_ref which is
         (key.offset - extent_offset).
      
      The reproducer:
      $ mkfs.btrfs sda
      $ mount sda /mnt
      $ btrfs sub create /mnt/sub
      $ for i in `seq 5 -1 1`; do dd if=/dev/zero of=/mnt/sub/foo bs=5k count=1 seek=$i conv=notrunc oflag=sync; done
      $ btrfs sub snap /mnt/sub /mnt/snap1
      $ btrfs sub snap /mnt/sub /mnt/snap2
      $ sync; btrfs filesystem defrag /mnt/sub/foo;
      $ umount /mnt
      $ btrfs-debug-tree sda (Here we can check whether the defrag operation is snapshot-awared.
      
      This addresses the above two problems.
      Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      e68afa49
    • J
      btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified · 7cddc193
      Jie Liu 提交于
      Create a small file and fallocate it to a big size with
      FALLOC_FL_KEEP_SIZE option, then truncate it back to the
      small size again, the disk free space is not changed back
      in this case. i.e,
      
      total 4
      -rw-r--r-- 1 root root 512 Jun 28 11:35 test
      
      Filesystem      Size  Used Avail Use% Mounted on
      ....
      /dev/sdb1       8.0G   56K  7.2G   1% /mnt
      
      -rw-r--r-- 1 root root 512 Jun 28 11:35 /mnt/test
      
      Filesystem      Size  Used Avail Use% Mounted on
      ....
      /dev/sdb1       8.0G  5.1G  2.2G  70% /mnt
      
      Filesystem      Size  Used Avail Use% Mounted on
      ....
      /dev/sdb1       8.0G  5.1G  2.2G  70% /mnt
      
      With this fix, the truncated up space is back as:
      Filesystem      Size  Used Avail Use% Mounted on
      ....
      /dev/sdb1       8.0G   56K  7.2G   1% /mnt
      Signed-off-by: NJie Liu <jeff.liu@oracle.com>
      Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
      Signed-off-by: NChris Mason <chris.mason@fusionio.com>
      7cddc193
    • L
      Merge tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 14e94194
      Linus Torvalds 提交于
      Pull ACPI and power management fixes from Rafael Wysocki:
      
       - ACPI-based memory hotplug stopped working after a recent change,
         because it's not possible to associate sufficiently many "physical"
         devices with one ACPI device object due to an artificial limit.  Fix
         from Rafael J Wysocki removes that limit and makes memory hotplug
         work again.
      
       - A change made in 3.9 uncovered a bug in the ACPI processor driver
         preventing NUMA nodes from being put offline due to an ordering
         issue.  Fix from Yasuaki Ishimatsu changes the ordering to make
         things work again.
      
       - One of the recent ACPI video commits (that hasn't been reverted so
         far) uncovered a bug in the code handling quirky BIOSes that caused
         some Asus machines to boot with backlight completely off which made
         it quite difficult to use them afterward.  Fix from Felipe Contreras
         improves the quirk to cover this particular case correctly.
      
       - A cpufreq user space interface change made in 3.10 inadvertently
         renamed the ignore_nice_load sysfs attribute to ignore_nice which
         resulted in some confusion.  Fix from Viresh Kumar changes the name
         back to ignore_nice_load.
      
       - An initialization ordering change made in 3.9 broke cpufreq on
         loongson2 boards.  Fix from Aaro Koskinen restores the correct
         initialization ordering there.
      
       - Fix breakage resulting from a mistake made in 3.9 and causing the
         detection of some graphics adapters (that were detected correctly
         before) to fail.  There are two objects representing the same PCIe
         port in the affected systems' ACPI tables and both appear as
         "enabled" and we are expected to guess which one to use.  We used to
         choose the right one before by pure luck, but when we tried to
         address another similar corner case, the luck went away.  This time
         we try to make our guessing a bit more educated which is reported to
         work on those systems.
      
       - The /proc/acpi/wakeup interface code is missing some locking which
         may lead to breakage if that file is written or read during hotplug
         of wakeup devices.  That should be rare but still possible, so it's
         better to start using the appropriate locking there.
      
      * tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI: Try harder to resolve _ADR collisions for bridges
        cpufreq: rename ignore_nice as ignore_nice_load
        cpufreq: loongson2: fix regression related to clock management
        ACPI / processor: move try_offline_node() after acpi_unmap_lsapic()
        ACPI: Drop physical_node_id_bitmap from struct acpi_device
        ACPI / PM: Walk physical_node_list under physical_node_lock
        ACPI / video: improve quirk check in acpi_video_bqc_quirk()
      14e94194
    • L
      Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging · fdafa7cf
      Linus Torvalds 提交于
      Pull hwmon fix from Guenter Roeck:
       "Fix bug in adt7470 driver which causes it to fail writing fan speed
        limits"
      
      * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        hwmon: (adt7470) Fix incorrect return code check
      fdafa7cf
    • L
      Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · 79a6fb1a
      Linus Torvalds 提交于
      Pull media fixes from Mauro Carvalho Chehab:
       "Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and
        a fix for media DocBook"
      
      * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
        [media] em28xx: fix assignment of the eeprom data
        [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
        [media] usbtv: fix dependency
        [media] usbtv: Throw corrupted frames away
        [media] usbtv: Fix deinterlacing
        [media] v4l2: added missing mutex.h include to v4l2-ctrls.h
        [media] DocBook: upgrade media_api DocBook version to 4.2
        [media] ml86v7667: fix compile warning: 'ret' set but not used
        [media] s5p-g2d: Fix registration failure
        [media] media: coda: Fix DT driver data pointer for i.MX27
        [media] s5p-mfc: Fix input/output format reporting
      79a6fb1a
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 58c59bc9
      Linus Torvalds 提交于
      Pull HID fix from Jiri Kosina:
       "Revert of a patch which breaks enumeration workaround in
        hid-logitech-dj"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        Revert "HID: hid-logitech-dj: querying_devices was never set"
      58c59bc9
    • L
      Merge tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux · 78ebf0e3
      Linus Torvalds 提交于
      Pull fbdev fixes from Tomi Valkeinen:
       - omapdss: compilation fix and DVI fix for PandaBoard
       - mxsfb: fix colors when using 18bit LCD bus
      
      * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
        ARM: OMAP: dss-common: fix Panda's DVI DDC channel
        video: mxsfb: fix color settings for 18bit data bus and 32bpp
        OMAPDSS: analog-tv-connector: compile fix
      78ebf0e3
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 6a933166
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Mostly radeon, more fixes for dynamic power management which is is off
        by default for this release anyways, but there are a large number of
        testers, so I'd like to keep merging the fixes.
      
        Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915
        regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix
        and one regression fix in the core"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits)
        drm: Don't pass negative delta to ktime_sub_ns()
        drm/radeon: make missing smc ucode non-fatal
        drm/radeon/dpm: require rlc for dpm
        drm/radeon/cik: use a mutex to properly lock srbm instanced registers
        drm/radeon: remove unnecessary unpin
        drm/radeon: add more UVD CS checking
        drm/radeon: stop sending invalid UVD destroy msg
        drm/radeon: only save UVD bo when we have open handles
        drm/radeon: always program the MC on startup
        drm/radeon: fix audio dto calculation on DCE3+ (v3)
        drm/radeon/dpm: disable sclk ss on rv6xx
        drm/radeon: fix halting UVD
        drm/radeon/dpm: adjust power state properly for UVD on SI
        drm/radeon/dpm: fix spread spectrum setup (v2)
        drm/radeon/dpm: adjust thermal protection requirements
        drm/radeon: select audio dto based on encoder id for DCE3
        drm/radeon: properly handle pm on gpu reset
        drm/i915: do not disable backlight on vgaswitcheroo switch off
        drm/i915: Don't call encoder's get_config unless encoder is active
        drm/i915: avoid brightness overflow when doing scale
        ...
      6a933166
    • O
      dlm: kill the unnecessary and wrong device_close()->recalc_sigpending() · 201d3dfa
      Oleg Nesterov 提交于
      device_close()->recalc_sigpending() is not needed, sigprocmask() takes
      care of TIF_SIGPENDING correctly.
      
      And without ->siglock it is racy and wrong, it can wrongly clear
      TIF_SIGPENDING and miss a signal.
      
      But even with this patch device_close() is still buggy:
      
        1. sigprocmask() should not be used, we have set_task_blocked(),
           but this is minor.
      
        2. We should never block SIGKILL or SIGSTOP, and this is what
           the code tries to do.
      
        3. This can't protect against SIGKILL or SIGSTOP anyway. Another
           thread can do signal_wake_up(), say, do_signal_stop() or
           complete_signal() or debugger.
      
        4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears
           TIF_SIGPENDING, say, freezing() or ->jobctl.
      
        5. device_write() looks equally wrong by the same reason.
      
      Looks like, this tries to protect some wait_event_interruptible() logic
      from signals, it should be turned into uninterruptible wait.  Or we need
      to implement something like signals_stop/start for such a use-case.
      Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      201d3dfa
  6. 09 8月, 2013 7 次提交
    • J
      Revert "HID: hid-logitech-dj: querying_devices was never set" · 8e5654ce
      Jiri Kosina 提交于
      This reverts commit 407a2c2a.
      
      Explanation provided by Benjamin Tissoires:
      
      Commit "HID: hid-logitech-dj, querying_devices was never set" activate
      a flag which guarantees that we do not ask the receiver for too many
      enumeration. When the flag is set, each following enumeration call is
      discarded (the usb request is not forwarded to the receiver). The flag
      is then released when the driver receive a pairing information event,
      which normally follows the enumeration request.
      However, the USB3 bug makes the driver think the enumeration request
      has been forwarded to the receiver. However, it is actually not the
      case because the USB stack returns -EPIPE. So, when a new unknown
      device appears, the workaround consisting in asking for a new
      enumeration is not working anymore: this new enumeration is discarded
      because of the flag, which is never reset.
      
      A solution could be to trigger a timeout before releasing it, but for
      now, let's just revert the patch.
      Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
      Tested-by: NSune Mølgaard <sune@molgaard.org>
      Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      8e5654ce
    • M
      powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs · 28e61cc4
      Michael Neuling 提交于
      If a transaction is rolled back, the Target Address Register (TAR), Processor
      Priority Register (PPR) and Data Stream Control Register (DSCR) should be
      restored to the checkpointed values before the transaction began.  Any changes
      to these SPRs inside the transaction should not be visible in the abort
      handler.
      
      Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR.  If
      we preempt a processes inside a transaction which has modified any of these, on
      process restore, that same transaction may be aborted we but we won't see the
      checkpointed versions of these SPRs.
      
      This adds checkpointed versions of these SPRs to the thread_struct and adds the
      save/restore of these three SPRs to the treclaim/trechkpt code.
      
      Without this if any of these SPRs are modified during a transaction, users may
      incorrectly see a speculated SPR value even if the transaction is aborted.
      Signed-off-by: NMichael Neuling <mikey@neuling.org>
      Cc: <stable@vger.kernel.org> [v3.10]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      28e61cc4
    • M
      powerpc: Save the TAR register earlier · c2d52644
      Michael Neuling 提交于
      This moves us to save the Target Address Register (TAR) a earlier in
      __switch_to.  It introduces a new function save_tar() to do this.
      
      We need to save the TAR earlier as we will overwrite it in the transactional
      memory reclaim/recheckpoint path.  We are going to do this in a subsequent
      patch which will fix saving the TAR register when it's modified inside a
      transaction.
      Signed-off-by: NMichael Neuling <mikey@neuling.org>
      Cc: <stable@vger.kernel.org> [v3.10]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      c2d52644
    • M
      powerpc: Fix context switch DSCR on POWER8 · 2517617e
      Michael Neuling 提交于
      POWER8 allows the DSCR to be accessed directly from userspace via a new SPR
      number 0x3 (Rather than 0x11.  DSCR SPR number 0x11 is still used on POWER8 but
      like POWER7, is only accessible in HV and OS modes).  Currently, we allow this
      by setting H/FSCR DSCR bit on boot.
      
      Unfortunately this doesn't work, as the kernel needs to see the DSCR change so
      that it knows to no longer restore the system wide version of DSCR on context
      switch (ie. to set thread.dscr_inherit).
      
      This clears the H/FSCR DSCR bit initially.  If a process then accesses the DSCR
      (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in
      facility_unavailable_exception().
      
      We also change _switch() so that we set or clear the H/FSCR DSCR bit based on
      the thread.dscr_inherit.
      Signed-off-by: NMichael Neuling <mikey@neuling.org>
      Cc: <stable@vger.kernel.org> [v3.10]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      2517617e
    • M
      powerpc: Rework setting up H/FSCR bit definitions · 74e400ce
      Michael Neuling 提交于
      This reworks the Facility Status and Control Regsiter (FSCR) config bit
      definitions so that we can access the bit numbers.  This is needed for a
      subsequent patch to fix the userspace DSCR handling.
      
      HFSCR and FSCR bit definitions are the same, so reuse them.
      Signed-off-by: NMichael Neuling <mikey@neuling.org>
      Cc: <stable@vger.kernel.org> [v3.10]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      74e400ce
    • M
      powerpc: Fix hypervisor facility unavaliable vector number · 88f09412
      Michael Neuling 提交于
      Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we
      mark it as an OS facility unavaliable (0xf60) as the two share the same code
      path.
      
      The becomes a problem in facility_unavailable_exception() as we aren't able to
      see the hypervisor facility unavailable exceptions.
      
      Below fixes this by duplication the required macros.
      Signed-off-by: NMichael Neuling <mikey@neuling.org>
      Cc: <stable@vger.kernel.org> [v3.10]
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      88f09412
    • T
      powerpc/kvm/book3s_pr: Return appropriate error when allocation fails · e0e13614
      Thadeu Lima de Souza Cascardo 提交于
      err was overwritten by a previous function call, and checked to be 0. If
      the following page allocation fails, 0 is going to be returned instead
      of -ENOMEM.
      Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      e0e13614