- 06 4月, 2009 38 次提交
-
-
由 David Brownell 提交于
Sometimes it's awkward to make sure that the array in the platform_data handed to the leds-gpio driver has only valid data ... some leds may not be always available, and coping with that currently requires patching or rebuilding the array. This patch fixes that by making it be OK to pass an invalid GPIO (such as "-EINVAL") ... such table entries are skipped. [rpurdie@linux.intel.com: adjusted to apply against other led tree changes] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Tested-by: NDiego Dompe <diego.dompe@ridgerun.com> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Riku Voipio 提交于
This fixes the expression in the driver to do the correct thing, not that I think anyone would send SND_* without EV_SND. Thanks to Roel Kluin <roel.kluin@gmail.com> for noticing. Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Uwe Kleine-König 提交于
A pointer to h1940leds_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Zhenwen Xu 提交于
This goto is unnecessary. Signed-off-by: NZhenwen Xu <helight.xu@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Kim Kyuwon 提交于
ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKim Kyuwon <chammoru@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Németh Márton 提交于
The leds-clevo-mail driver is in the mainline kernel since 2.6.25 and works without severe problems. Make this driver available for a larger audience. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Adam Nielsen 提交于
Signed-off-by: NAdam Nielsen <a.nielsen@shikadi.net> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Felipe Balbi 提交于
The gpio led trigger will allow leds to be triggered by gpio events. When we give the led a gpio number, the trigger will request_irq() on that so we don't have to keep polling for gpio state. It's useful for usecases as n810's keypad leds that could be triggered by the gpio event generated when user slides up to show the keypad. We also provide means for userland to tell us what is the desired brightness for that special led when it goes on so userland could use information from ambient light sensors and not set led brightness too high if it's not necessary. Signed-off-by: NFelipe Balbi <me@felipebalbi.com> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Phil Sutter 提交于
Mikrotik built six LEDs into the Routerboard 532, from which one is destined for custom use, the so called "User LED". This patch adds a driver for it, based on the LEDs class. Signed-off-by: NPhil Sutter <n0-1@freewrt.org> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Richard Purdie 提交于
Add an option to preserve LED state when suspending/resuming to the LED gpio driver. Based on a suggestion from Robert Jarzmik. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Luotao Fu 提交于
Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by: NLuotao Fu <l.fu@pengutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Richard Purdie 提交于
You can't have multiple module_init()/module_exit calls so resort to messy ifdefs potentially pending some code refactoring. Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Guennadi Liakhovetski 提交于
Add an LED driver using the DAC124S085 DAC from NatSemi [randy.dunlap@oracle.com: use header files for interfaces] Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Guennadi Liakhovetski 提交于
This patch allows drivers to override the default maximum brightness value of 255. We take care to preserve backwards-compatibility as much as possible, so that user-space ABI doesn't change for existing drivers. LED trigger code has also been updated to use the per-LED maximum. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
由 Trent Piepho 提交于
Add bindings to support LEDs defined as of_platform devices in addition to the existing bindings for platform devices. New options in Kconfig allow the platform binding code and/or the of_platform code to be turned on. The of_platform code is of course only available on archs that have OF support. The existing probe and remove methods are refactored to use new functions create_gpio_led(), to create and register one led, and delete_gpio_led(), to unregister and free one led. The new probe and remove methods for the of_platform driver can then share most of the common probe and remove code with the platform driver. The suspend and resume methods aren't shared, but they are very short. The actual led driving code is the same for LEDs created by either binding. The OF bindings are based on patch by Anton Vorontsov <avorontsov@ru.mvista.com>. They have been extended to allow multiple LEDs per device. Signed-off-by: NTrent Piepho <tpiepho@freescale.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b62' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: Audit: remove spaces from audit_log_d_path audit: audit_set_auditable defined but not used audit: incorrect ref counting in audit tree tag_chunk audit: Fix possible return value truncation in audit_get_context() audit: ignore terminating NUL in AUDIT_USER_TTY messages Audit: fix handling of 'strings' with NULL characters make the e->rule.xxx shorter in kernel auditfilter.c auditsc: fix kernel-doc notation audit: EXECVE record - removed bogus newline
-
git://git.o-hand.com/linux-mfd由 Linus Torvalds 提交于
* 'for-next' of git://git.o-hand.com/linux-mfd: mfd: fix da903x warning mfd: fix MAINTAINERS entry mfd: Use the value of the final spin when reading the AUXADC mfd: Storage class should be before const qualifier mfd: PASIC3: supply clock_rate to DS1WM via driver_data mfd: remove DS1WM clock handling mfd: remove unused PASIC3 bus_shift field pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data mfd: convert PASIC3 to use MFD core mfd: convert DS1WM to use MFD core mfd: Support active high IRQs on WM835x mfd: Use bulk read to fill WM8350 register cache mfd: remove duplicated #include from pcf50633
-
git://repo.or.cz/cris-mirror由 Linus Torvalds 提交于
* 'for-linus' of git://repo.or.cz/cris-mirror: CRISv32: Remove extraneous space between -I and the path. cris: convert obsolete hw_interrupt_type to struct irq_chip BUG to BUG_ON changes cpumask: use mm_cpumask() wrapper: cris cpumask: Use accessors code.: cris cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: cris
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits) ACPI: processor: use .notify method instead of installing handler directly ACPI: button: use .notify method instead of installing handler directly ACPI: support acpi_device_ops .notify methods toshiba-acpi: remove MAINTAINERS entry ACPI: battery: asynchronous init acer-wmi: Update copyright notice & documentation acer-wmi: Cleanup the failure cleanup handling acer-wmi: Blacklist Acer Aspire One video: build fix thinkpad-acpi: rework brightness support thinkpad-acpi: enhanced debugging messages for the fan subdriver thinkpad-acpi: enhanced debugging messages for the hotkey subdriver thinkpad-acpi: enhanced debugging messages for rfkill subdrivers thinkpad-acpi: restrict access to some firmware LEDs thinkpad-acpi: remove HKEY disable functionality thinkpad-acpi: add new debug helpers and warn of deprecated atts thinkpad-acpi: add missing log levels thinkpad-acpi: cleanup debug helpers thinkpad-acpi: documentation cleanup thinkpad-acpi: drop ibm-acpi alias ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: sh7785lcr: Map whole PCI address space. sh: Fix up DSP context save/restore. sh: Fix up number of on-chip DMA channels on SH7091. sh: update defconfigs. sh: Kill off broken direct-mapped cache mode. sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle. sh: Add a command line option for disabling I/O trapping. sh: Select ARCH_HIBERNATION_POSSIBLE. sh: migor: Fix up CEU use flags. input: migor_ts: add wakeup support rtc: rtc-sh: use set_irq_wake() input: sh_keysc: use enable/disable_irq_wake() sh: intc: set_irq_wake() support sh: intc: install enable, disable and shutdown callbacks clocksource: sh_cmt: use remove_irq() and remove clockevent workaround sh: ap325 and Migo-R use new sh_mobile_ceu_info flags sh: Fix up -Wformat-security whining. sh: ap325rxa: Add ov772x support, again. sh: Sanitize asm/mmu.h for assembly use. sh: Tidy up sh7786 pinmux table. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6由 Linus Torvalds 提交于
* 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: add hardware handshake support to atmel_serial avr32: add RTS/CTS/CLK pin selection for the USARTs Add RTC support for Merisc boards avr32: at32ap700x: setup DMA for AC97C in the machine code avr32: at32ap700x: setup DMA for ABDAC in the machine code Add Merisc board support avr32: use gpio_is_valid() to check USBA vbus_pin I/O line atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line avr32: fix timing LCD parameters for EVKLCD10X boards avr32: use GPIO line PB15 on EVKLCD10x boards for backlight avr32: configure MCI detect and write protect pins for EVKLCD10x boards avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards avr32: add pin mask for 18-bit color on the LCD controller avr32: fix 15-bit LCDC pin mask to use MSB lines
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (714 commits) Staging: sxg: slicoss: Specify the license for Sahara SXG and Slicoss drivers Staging: serqt_usb: fix build due to proc tty changes Staging: serqt_usb: fix checkpatch errors Staging: serqt_usb: add TODO file Staging: serqt_usb: Lindent the code Staging: add USB serial Quatech driver staging: document that the wifi staging drivers a bit better Staging: echo cleanup Staging: BUG to BUG_ON changes Staging: remove some pointless conditionals before kfree_skb() Staging: line6: fix build error, select SND_RAWMIDI Staging: line6: fix checkpatch errors in variax.c Staging: line6: fix checkpatch errors in toneport.c Staging: line6: fix checkpatch errors in pcm.c Staging: line6: fix checkpatch errors in midibuf.c Staging: line6: fix checkpatch errors in midi.c Staging: line6: fix checkpatch errors in dumprequest.c Staging: line6: fix checkpatch errors in driver.c Staging: line6: fix checkpatch errors in audio.c Staging: line6: fix checkpatch errors in pod.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
-
由 Eric Paris 提交于
audit_log_d_path had spaces in the strings which would be emitted on the error paths. This patch simply replaces those spaces with an _ or removes the needless spaces entirely. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Paris 提交于
after 0590b933 audit_set_auditable() is now only used by the audit tree code. If CONFIG_AUDIT_TREE is unset it will be defined but unused. This patch simply moves the function inside a CONFIG_AUDIT_TREE block. cc1: warnings being treated as errors /home/acme_unencrypted/git/linux-2.6-tip/kernel/auditsc.c:745: error: ‘audit_set_auditable’ defined but not used make[2]: *** [kernel/auditsc.o] Error 1 make[1]: *** [kernel] Error 2 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Paris 提交于
tag_chunk has bad exit paths in which the inotify ref counting is wrong. At the top of the function we found &old_watch using inotify_find_watch(). inotify_find_watch takes a reference to the watch. This is never dropped on an error path. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Paul Moore 提交于
The audit subsystem treats syscall return codes as type long, unfortunately the audit_get_context() function mistakenly converts the return code to an int type in the parameters which could cause problems on systems where the sizeof(int) != sizeof(long). Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miloslav Trmac 提交于
AUDIT_USER_TTY, like all other messages sent from user-space, is sent NUL-terminated. Unlike other user-space audit messages, which come only from trusted sources, AUDIT_USER_TTY messages are processed using audit_log_n_untrustedstring(). This patch modifies AUDIT_USER_TTY handling to ignore the trailing NUL and use the "quoted_string" representation of the message if possible. Signed-off-by: NMiloslav Trmac <mitr@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miloslav Trmac 提交于
currently audit_log_n_untrustedstring() uses audit_string_contains_control() to check if the 'string' has any control characters. If the 'string' has an embedded NULL audit_string_contains_control() will return that the data has no control characters and will then pass the string to audit_log_n_string with the total length, not the length up to the first NULL. audit_log_n_string() does a memcpy of the entire length and so the actual audit record emitted may then contain a NULL and then whatever random memory is after the NULL. Since we want to log the entire octet stream (if we can't trust the data to be a string we can't trust that a NULL isn't actually a part of it) we should just consider NULL as a control character. If the caller is certain they want to stop at the first NULL they should be using audit_log_untrustedstring. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Zhenwen Xu 提交于
make the e->rule.xxx shorter in kernel/auditfilter.c -- --------------------------------- Zhenwen Xu - Open and Free Home Page: http://zhwen.org My Studio: http://dim4.cn >From 99692dc640b278f1cb1a15646ce42f22e89c0f77 Mon Sep 17 00:00:00 2001 From: Zhenwen Xu <Helight.Xu@gmail.com> Date: Thu, 12 Mar 2009 22:04:59 +0800 Subject: [PATCH] make the e->rule.xxx shorter in kernel/auditfilter.c Signed-off-by: NZhenwen Xu <Helight.Xu@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Randy Dunlap 提交于
Fix auditsc kernel-doc notation: Warning(linux-2.6.28-git7//kernel/auditsc.c:2156): No description found for parameter 'attr' Warning(linux-2.6.28-git7//kernel/auditsc.c:2156): Excess function parameter 'u_attr' description in '__audit_mq_open' Warning(linux-2.6.28-git7//kernel/auditsc.c:2204): No description found for parameter 'notification' Warning(linux-2.6.28-git7//kernel/auditsc.c:2204): Excess function parameter 'u_notification' description in '__audit_mq_notify' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Eric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jiri Pirko 提交于
(updated) Added hunk that changes the comment, the rest is the same. EXECVE records contain a newline after every argument. auditd converts "\n" to " " so you cannot see newlines even in raw logs, but they're there nevertheless. If you're not using auditd, you need to work round them. These '\n' chars are can be easily replaced by spaces when creating record in kernel. Note there is no need for trailing '\n' in an audit record. record before this patch: "type=EXECVE msg=audit(1231421801.566:31): argc=4 a0=\"./test\"\na1=\"a\"\na2=\"b\"\na3=\"c\"\n" record after this patch: "type=EXECVE msg=audit(1231421801.566:31): argc=4 a0=\"./test\" a1=\"a\" a2=\"b\" a3=\"c\"" Signed-off-by: NJiri Pirko <jpirko@redhat.com> Acked-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Merge branch 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: bzip2/lzma: quiet Kconfig warning for INITRAMFS_COMPRESSION_NONE
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits) cpumask: remove cpumask allocation from idle_balance, fix numa, cpumask: move numa_node_id default implementation to topology.h, fix cpumask: remove cpumask allocation from idle_balance x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus x86: cpumask: update 32-bit APM not to mug current->cpus_allowed x86: microcode: cleanup x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash numa, cpumask: move numa_node_id default implementation to topology.h cpumask: convert node_to_cpumask_map[] to cpumask_var_t cpumask: remove x86 cpumask_t uses. cpumask: use cpumask_var_t in uv_flush_tlb_others. cpumask: remove cpumask_t assignment from vector_allocation_domain() cpumask: make Xen use the new operators. cpumask: clean up summit's send_IPI functions cpumask: use new cpumask functions throughout x86 x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t cpumask: convert node_to_cpumask_map[] to cpumask_var_t x86: unify 32 and 64-bit node_to_cpumask_map ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param: module: use strstarts() strstarts: helper function for !strncmp(str, prefix, strlen(prefix)) arm: allow usage of string functions in linux/string.h module: don't use stop_machine on module load module: create a request_module_nowait() module: include other structures in module version check module: remove the SHF_ALLOC flag on the __versions section. module: clarify the force-loading taint message. module: Export symbols needed for Ksplice Ksplice: Add functions for walking kallsyms symbols module: remove module_text_address() module: __module_address module: Make find_symbol return a struct kernel_symbol kernel/module.c: fix an unused goto label param: fix charp parameters set via sysfs Fix trivial conflicts in kernel/extable.c manually.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'core/debugobjects' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debugobjects: delay free of internal objects debugobjects: replace static objects when slab cache becomes available debug_objects: add boot-parameter toggle to turn object debugging off again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: correct the behavior of printk_timed_ratelimit() vsprintf: unify the format decoding layer for its 3 users, cleanup fix regression from "vsprintf: unify the format decoding layer for its 3 users" vsprintf: fix bug in negative value printing vsprintf: unify the format decoding layer for its 3 users vsprintf: add binary printf printk: introduce printk_once() Fix trivial conflicts (printk_once vs log_buf_kexec_setup() added near each other) in include/linux/kernel.h.
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (42 commits) atmel-mci: fix sdc_reg typo tmio_mmc: add maintainer mmc: Add OpenFirmware bindings for SDHCI driver sdhci: Add quirk for forcing maximum block size to 2048 bytes sdhci: Add quirk for controllers that need IRQ re-init after reset sdhci: Add quirk for controllers that need small delays for PIO sdhci: Add set_clock callback and a quirk for nonstandard clocks sdhci: Add get_{max,timeout}_clock callbacks sdhci: Add support for hosts reporting inverted write-protect state sdhci: Add support for card-detection polling sdhci: Enable only relevant (DMA/PIO) interrupts during transfers sdhci: Split card-detection IRQs management from sdhci_init() sdhci: Add support for bus-specific IO memory accessors mmc_spi: adjust for delayed data token response omap_hsmmc: Wait for SDBP omap_hsmmc: Fix MMC3 dma omap_hsmmc: Disable SDBP at suspend omap_hsmmc: Do not prefix slot name omap_hsmmc: Allow cover switch to cause rescan omap_hsmmc: Add 8-bit bus width mode support ...
-
- 05 4月, 2009 2 次提交
-
-
由 Bjorn Helgaas 提交于
This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> CC: Zhang Rui <rui.zhang@intel.com> CC: Zhao Yakui <yakui.zhao@intel.com> CC: Venki Pallipadi <venkatesh.pallipadi@intel.com> CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. Note that events from fixed hardware buttons now show up as a special notify event, so to preserve user-space backward compatibility, we convert that back to ACPI_BUTTON_NOTIFY_STATUS. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: NAlex Chiang <achiang@hp.com> CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-