- 26 6月, 2013 22 次提交
-
-
由 Daniel Borkmann 提交于
Add two ktime helper functions that i) convert a given msec value to a ktime structure and ii) that adds a msec value to a ktime structure. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
We do neither ship a test_frame.h, nor will this be compatible with the 2.5 out-of-tree lksctp kernel test suite anyway. So remove this artefact. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Should not allow negative num_vfs Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: NVladimir Sokolovsky <vlad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dotan Barak 提交于
Warning prints when there are command timeout to help debugging future failures. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dotan Barak 提交于
It is not safe to use sscanf. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.com> Signed-off-by: NVladimir Sokolovsky <vlad@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dotan Barak 提交于
Since this variable is now part of a structure and not allocated dynamically, this test is irrelevant now. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Print a warning when a TX timeout is detected Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
The RX rings were cleaned while there was still possible RX traffic completion handling. Change the sequance of events so that the port is closed and the QPs are being stopped before RX cleanup. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
The port vlan table size is 126 (used for IBoE) so after 126 we will not have space and the user need to see it only in debug print and not error. Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com> Reviewed-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
To avoid a race between the open function and everything that happens after register_netdev() move it to be the last operation called. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
There are no counters allocated to the eth device when the port is down, so this query is meaningless at that time. It also leads to querying incorrect counters (since the counter_index is not valid when the device port is down). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dotan Barak 提交于
Wrong condition was used when calling iounmap. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
If the tokenized ip address is re-set on an interface we depend on the arrival of a new router advertisment to call addrconf_verify to clean up the old address (which valid_lft is now set to 0). Old addresses can linger around for a longer time if e.g. the source of router advertisments vanishes. So, call addrconf_verify immediately after setting the new tokenized address to get rid of the old tokenized addresses. Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
The reason behind this change is that as soon as we delete the last ipv6 address of an interface we also lose the /proc/sys/net/ipv6/conf/<interface> directory. This seems to be a usability problem for me. I don't see any reason why we should shutdown ipv6 on that interface in such cases. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> mlx4 exclusively uses order-2 allocations in RX path, which are likely to fail under memory pressure. We therefore drop frames more than needed. This patch tries order-3, order-2, order-1 and finally order-0 allocations to keep good performance, yet allow allocations if/when memory gets fragmented. By using larger pages, and avoiding unnecessary get_page()/put_page() on compound pages, this patch improves performance as well, lowering false sharing on struct page. Also use GFP_KERNEL allocations in initialization path, as allocating 12 MB (390 order-3 pages) can easily fail with GFP_ATOMIC. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Acked-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next由 David S. Miller 提交于
Ben Hutchings says: ==================== 1. Make EEH recovery work when using legacy interrupts, from Alexandre Rames. 2. Enable accelerated RFS for VLAN-tagged flows, from Andy Lutomirski. 3. Improve performance for non-TCP (and particularly UDP) traffic, which regressed in 3.10 when we switched to always allocating paged RX buffers. Partly by Jon Cooper. 4. Some minor bug fixes to IOMMU detection, timestamping capabilities, and IRQ cleanup on the probe failure path. I've dropped the RX skb cache, which improved some benchmarks but perhaps needs some reworking to be more generally useful. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Ott 提交于
Since commit 82dc3c63 "net: introduce NAPI_POLL_WEIGHT" network drivers receive a warning when they use napi weight higher than NAPI_POLL_WEIGHT. This patch reduces QETH_NAPI_WEIGHT from 128 to 64 (NAPI_POLL_WEIGHT). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
When the initial MTU size is changed prior to any activity on the device (e.g. by attaching a z/VM vNIC already configured in Linux to a guestLAN), we call dev_kfree_skb_irq(NULL) which results in a kernel panic. Adding a proper check for NULL pointers to address this issue. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
blkt settings (or LAN idle settings) for an OSA Express card determine when and how often an OSA Express card tells the operating system about new incoming packets. The semantic of these settings has changed starting with OSA Express3. Currently the qeth standard settings apply to OSA Express2 and older generations of OSA Express cards, while new generations of OSA Express cards require extra coding of their reasonable default. To cover future OSA Express generations the qeth default standard blkt setting is now the desired setting for OSA generations starting with OSA Express3, while the fixed set of older OSA Express cards receives its blkt settings explicitly. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Raspl 提交于
Increase the default MTU for real OSA devices in layer 2 mode to 1500 Bytes for increased compatibility. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
If someone is interested to dump something they may consider to use print_hex_dump() or print_hex_dump_bytes() kernel helpers. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 6月, 2013 16 次提交
-
-
由 Yuval Mintz 提交于
This patch solves several sparse issues as well as an unneeded semicolon found via coccinelle. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit f88c91dd ("ipv6: statically link register_inet6addr_notifier()" added following sparse warnings : net/ipv6/addrconf_core.c:83:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:89:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:95:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Cong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
struct tcp_fastopen_context has a field named tfm, which is a pointer to a crypto_cipher structure. It currently has a __rcu annotation, which is not needed at all. tcp_fastopen_ctx is the pointer fetched by rcu_dereference(), but once we have a pointer to current tcp_fastopen_context, we do not use/need rcu_dereference() to access tfm. This fixes a lot of sparse errors like the following : net/ipv4/tcp_fastopen.c:21:31: warning: incorrect type in argument 1 (different address spaces) net/ipv4/tcp_fastopen.c:21:31: expected struct crypto_cipher *tfm net/ipv4/tcp_fastopen.c:21:31: got struct crypto_cipher [noderef] <asn:4>*tfm Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Currently, there is no good possibility to debug netlink traffic that is being exchanged between kernel and user space. Therefore, this patch implements a netlink virtual device, so that netlink messages will be made visible to PF_PACKET sockets. Once there was an approach with a similar idea [1], but it got forgotten somehow. I think it makes most sense to accept the "overhead" of an extra netlink net device over implementing the same functionality from PF_PACKET sockets once again into netlink sockets. We have BPF filters that can already be easily applied which even have netlink extensions, we have RX_RING zero-copy between kernel- and user space that can be reused, and much more features. So instead of re-implementing all of this, we simply pass the skb to a given PF_PACKET socket for further analysis. Another nice benefit that comes from that is that no code needs to be changed in user space packet analyzers (maybe adding a dissector, but not more), thus out of the box, we can already capture pcap files of netlink traffic to debug/troubleshoot netlink problems. Also thanks goes to Thomas Graf, Flavio Leitner, Jesper Dangaard Brouer. [1] http://marc.info/?l=linux-netdev&m=113813401516110Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Similarly to the networking receive path with ptype_all taps, we add the possibility to register netdevices that are for ARPHRD_NETLINK to the netlink subsystem, so that those can be used for netlink analyzers resp. debuggers. We do not offer a direct callback function as out-of-tree modules could do crap with it. Instead, a netdevice must be registered properly and only receives a clone, managed by the netlink layer. Symbols are exported as GPL-only. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
This small patch adds the definition of ARPHRD_NETLINK which can for example be used by netlink monitoring devices as device type. So that sockaddr_ll can pick it up and based on that choose the correct packet dissector. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This restores commits: c573972c 1a590434 da2e2c21 which initially accidently went into 'net', were reverted there, and then properly placed into 'net-next'. But the next net --> net-next merge accidently wiped them out again. Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
The device::iommu_group field may be set even if no IOMMU is in use. iommu_present() is still a better indicator, although it doesn't tell us whether *our* device is affected. Reported-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The lifetime of an irq_cpu_rmap is odd: we have to allocate it before installing IRQ handlers and free it before removing the IRQ handlers. As a result of this asymmetry, it was omitted from some failure paths. On another failure path, we could try to remove IRQ handlers we had not yet installed. Move the irq_cpu_rmap allocation and freeing alongside IRQ handler installation and removal, in efx_nic_{init,fini}_interrupts(). Count the number of IRQ handlers successfully installed and only remove those on the failure path. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
GRO can handle non-TCP packets and pass them up without coalescing, but it has to do some extra work to parse the packet which we can bypass using the hardware parse result. (This condition yields a false negative for TCP/IPv6 packets received by Falcon, but its performance is already poor in that case due to lack of checksum offload.) Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
This will be useful for shortcutting some software packet parsing. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Andy Lutomirski 提交于
As far as I know, the hardware doesn't support matching on both IP fields and vlan tag, but it can at least match on the IP fields. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The kernel can generate software receive timestamps and we should report those for all ports regardless of hardware capabilities. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
This allows the SKB to hold the headers without reallocation more often. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Alexandre Rames 提交于
PCI legacy interrupts are level-triggered, and we cannot mask them up on an isolated device. Instead, disable the IRQ at the controller until we have recovered. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 24 6月, 2013 2 次提交
-
-
由 Yuval Mintz 提交于
This fixes an issue caused by submit 78c3bcc5 `bnx2x: Improve PF behaviour toward VF', which made the bnx2x driver fail compilation when PCI_IOV is not set. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wedson Almeida Filho 提交于
Callers of skb_seq_read() are currently forced to call skb_abort_seq_read() even when consuming all the data because the last call to skb_seq_read (the one that returns 0 to indicate the end) fails to unmap the last fragment page. With this patch callers will be allowed to traverse the SKB data by calling skb_prepare_seq_read() once and repeatedly calling skb_seq_read() as originally intended (and documented in the original commit 677e90ed), that is, only call skb_abort_seq_read() if the sequential read is actually aborted. Signed-off-by: NWedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-