Add Kconfig entries to manage what devices get assigned an MQ
scheduler, and add a blk-mq flag for drivers to opt out of scheduling.
The latter is useful for admin type queues that still allocate a blk-mq
queue and tag set, but aren't use for normal IO.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

This is basically identical to deadline-iosched, except it registers
as a MQ capable scheduler. This is still a single queue design.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler.  Scheduled blkcg cleanup requires calling
into blkcg from block core.  To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.

If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.

-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
     depend on BLK_CGROUP.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NDivyesh Shah <dpshah@google.com>
Reviewed-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Modify the Block I/O cgroup subsystem to be able to be built as a module.
As the CFQ disk scheduler optionally depends on blk-cgroup, config options
in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are
enhanced to support the new module dependency.
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

o Now issues of blkio controller and CFQ in module mode should be fixed.
  Enable the cfq group scheduling support in module mode.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It's currently not an allowed configuration, so express that in Kconfig.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

o Some debugging aids for CFQ.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

o Bring in the per cfq group weight and how vdisktime is calculated for the
  group. Also bring in the functionality of updating the min_vdisktime of
  the group service tree.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

o This is basic implementation of blkio controller cgroup interface. This is
  the common interface visible to user space and should be used by different
  IO control policies as we implement those.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Update Kconfig.iosched entry.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

AS is mostly a subset of CFQ, so there's little point in still
providing this separate IO scheduler. Hopefully at some point we
can get down to one single IO scheduler again, at least this brings
us closer by having only one intelligent IO scheduler.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Change I/O scheduler description to correctly show CFQ as being the default
scheduler and not the anticipatory scheduler that previously was default.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NJens Axboe <axboe@suse.de>

With the recent reorg of the io scheduler selection, it unfortunately
became possible to select an io scheduler to be the default even if it
wasn't builtin. Fix this by requiring the default scheduler to be
builtin.
Signed-off-by: NJens Axboe <axboe@suse.de>

drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.
Signed-off-by: NJens Axboe <axboe@suse.de>

Add a kconfig submenu to select the default I/O scheduler, in case
anticipatory is not compiled in or another default is preferred.  Also,
since no-op is always available, we should use it whenever the selected
default is not.
Signed-off-by: NNate Diller <nate@namesys.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!