Remove declarations from the header and move the definitions up in the
source so they need not be forward declared.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_process_message() function (if any) to call when data is
received is known at initialization.  Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
audio endpoints for the interface.  Drop the conditional logic and make
these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 1027f476 (staging: line6: sync with upstream) removed PCM
from the Pocket POD capabilities but left the endpoint configuration.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
control endpoints for the interface.  Drop the conditional logic and
make these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the altsetting for the
interface.  Drop the conditional logic and make this value a property.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices.  Use the device table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 1 of the Pocket POD.  Use the device
table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver uses a different altsetting depending on the interface.  Add
device type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PODxt Live device has both a POD and a Variax interface.  Add device
type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save
horizontal space when defining the properties entries.  Now that these
are no longer limited to single lines this is not such a concern.
Specify capabilities individually when defining each property for
better clarity.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Specify the index of the properties entry explicitly to define this
structure more robustly.  Also, drop the `L6PROP' macro in favor of
initializing each member explicitly on its own line since horizontal
space is limited and more attributes will be added later.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Including "BIT" in the macro name is pointless.  Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are now only used to build the device table.  Each entry in this
table is already clearly documented as to what device it maps to so the
macros become unnecessary indirection.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver currently uses the device's idProduct as input to several
switch statements.  In some cases this is not sufficiently granular and
the interface number must be taken into account.

Store the device type in `usb_line6' and key off of it instead.  New
types can then be added that map to specific interfaces on the device so
that this conditional logic can be flattened out.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current logic uses the index of the matched entry from the device
table as an offset to the corresponding properties entry.  The values
of the new `line6_device_type' enum are ordered such that they can be
used as an index into either of these arrays.  Drop the device entry
lookup logic and use the device type (via the .driver_info member)
instead.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Define an enum containing the supported devices and associate each entry
in the device table to the respective value.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Wrap USB_DEVICE to avoid repeating the Line 6 vendor ID.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support for these devices appears to have never been completed.  Remove
them from the device table along with a minimal amount of supporting
code.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This function was no longer used as of commit 28079044 (staging:
line6: drop MIDI parameter sysfs attrs).
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The `device_bit' member was no longer used as of commit 28079044
(staging: line6: drop MIDI parameter sysfs attrs).
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix three space prohibited errors in pcm.h found by checkpatch.pl.
Signed-off-by: NJonas Lundqvist <jonas@gannon.se>
Reviewed-by: NJeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The NULL check was done to late, and there it was a risk
of a possible null pointer dereference.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull ARM fixes from Russell King:
 "Three small fixes from over the Christmas period, and wiring up the
  new execveat syscall for ARM"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
  ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
  ARM: 8249/1: mm: dump: don't skip regions
  ARM: wire up execveat syscall

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
  with certain odd memory mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Use asm volatile in __getcpu
  x86/build: Clean auto-generated processor feature files
  x86: Fix mkcapflags.sh bash-ism
  x86: Fix step size adjustment during initial memory mapping
  x86_64, vdso: Fix the vdso address randomization algorithm

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: group scheduling corner case fix, two deadline scheduler
  fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
  system fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
  sched/deadline: Avoid double-accounting in case of missed deadlines
  sched/deadline: Fix migration of SCHED_DEADLINE tasks
  sched: Fix odd values in effective_load() calculations
  sched, fanotify: Deal with nested sleeps
  sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also some kernel side fixes: uncore PMU
  driver fix, user regs sampling fix and an instruction decoder fix that
  unbreaks PEBS precise sampling"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
  perf/x86_64: Improve user regs sampling
  perf: Move task_pt_regs sampling into arch code
  x86: Fix off-by-one in instruction decoder
  perf hists browser: Fix segfault when showing callchain
  perf callchain: Free callchains when hist entries are deleted
  perf hists: Fix children sort key behavior
  perf diff: Fix to sort by baseline field by default
  perf list: Fix --raw-dump option
  perf probe: Fix crash in dwarf_getcfi_elf
  perf probe: Fix to fall back to find probe point in symbols
  perf callchain: Append callchains only when requested
  perf ui/tui: Print backtrace symbols when segfault occurs
  perf report: Show progress bar for output resorting

Pull locking fixes from Ingo Molnar:
 "A liblockdep fix and a mutex_unlock() mutex-debugging fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Always clear owner field upon mutex_unlock()
  tools/liblockdep: Fix debug_check thinko in mutex destroy

Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent
endless growth of anon_vma hierarchy")

Anon_vma_clone() is usually called for a copy of source vma in
destination argument.  If source vma has anon_vma it should be already
in dst->anon_vma.  NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork().  In this case anon_vma_clone() finds
anon_vma for reusing.

Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that.  As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.

This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: NChris Clayton <chris2553@googlemail.com>
Reported-and-tested-by: NOded Gabbay <oded.gabbay@amd.com>
Reported-and-tested-by: NChih-Wei Huang <cwhuang@android-x86.org>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org  # to match back-porting of 7a3ef208Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit fee7e49d ("mm: propagate error from stack expansion even for
guard page") made sure that we return the error properly for stack
growth conditions.  It also theorized that counting the guard page
towards the stack limit might break something, but also said "Let's see
if anybody notices".

Somebody did notice.  Apparently android-x86 sets the stack limit very
close to the limit indeed, and including the guard page in the rlimit
check causes the android 'zygote' process problems.

So this adds the (fairly trivial) code to make the stack rlimit check be
against the actual real stack size, rather than the size of the vma that
includes the guard page.
Reported-and-tested-by: NChih-Wei Huang <cwhuang@android-x86.org>
Cc: Jay Foad <jay.foad@gmail.com>
Cc: stable@kernel.org  # to match back-porting of fee7e49dSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull VFIO fix from Alex Williamson:
 "Fix PCI header check in vfio_pci_probe() (Wei Yang)"

* tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix the check on pci device type in vfio_pci_probe()

Pull SCSI fix from James Bottomley:
 "Just one fix: a qlogic busy wait regression"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  qla2xxx: fix busy wait regression

Pull sound fixes from Takashi Iwai:
 "All a few small regression or stable fixes: a Nvidia HDMI ID addition,
  a regression fix for CAIAQ stream count, a typo fix for GPIO setup
  with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix"

* tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireworks: fix an endianness bug for transaction length
  ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda
  ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
  ALSA: snd-usb-caiaq: fix stream count check

Pull HID updates from Jiri Kosina:

 - bounds checking fixes in logitech and roccat drivers, from Peter Wu
   and Dan Carpenter

 - double-kfree fix in i2c-hid driver on bus shutdown, from Mika
   Westerberg

 - a couple of various small driver fixes

 - a few device id additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
  HID: Add a new id 0x501a for Genius MousePen i608X
  HID: logitech-hidpp: prefix the name with "Logitech"
  HID: logitech-hidpp: avoid unintended fall-through
  HID: Allow HID_BATTERY_STRENGTH to be enabled
  HID: i2c-hid: Do not free buffers in i2c_hid_stop()
  HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard
  HID: logitech-hidpp: check WTP report length
  HID: logitech-dj: check report length