The "by8" implementation introduced in commit 22cddcc7 ("crypto: aes
- AES CTR x86_64 "by8" AVX optimization") is failing crypto tests as it
handles counter block overflows differently. It only accounts the right
most 32 bit as a counter -- not the whole block as all other
implementations do. This makes it fail the cryptomgr test #4 that
specifically tests this corner case.

As we're quite late in the release cycle, just disable the "by8" variant
for now.
Reported-by: NRomain Francoise <romain@orebokech.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The following bug can be triggered by hot adding and removing a large number of
xen domain0's vcpus repeatedly:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group
	PGD 5a9d5067 PUD 13067 PMD 0
	Oops: 0000 [#3] SMP
	[...]
	Call Trace:
	load_balance
	? _raw_spin_unlock_irqrestore
	idle_balance
	__schedule
	schedule
	schedule_timeout
	? lock_timer_base
	schedule_timeout_uninterruptible
	msleep
	lock_device_hotplug_sysfs
	online_store
	dev_attr_store
	sysfs_write_file
	vfs_write
	SyS_write
	system_call_fastpath

Last level cache shared mask is built during CPU up and the
build_sched_domain() routine takes advantage of it to setup
the sched domain CPU topology.

However, llc_shared_mask is not released during CPU disable,
which leads to an invalid sched domainCPU topology.

This patch fix it by releasing the llc_shared_mask correctly
during CPU disable.

Yasuaki also reported that this can happen on real hardware:

  https://lkml.org/lkml/2014/7/22/1018

His case is here:

	==
	Here is an example on my system.
	My system has 4 sockets and each socket has 15 cores and HT is
	enabled. In this case, each core of sockes is numbered as
	follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89
	Socket#2 | 30-44, 90-104
	Socket#3 | 45-59, 105-119

	Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.

	It means that last level cache of Socket#2 is shared with
	CPU#30-44 and 90-104.

	When hot-removing socket#2 and #3, each core of sockets is
	numbered as follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89

	But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30
	remains having 0x3fff80000001fffc0000000.

	After that, when hot-adding socket#2 and #3, each core of
	sockets is numbered as follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89
	Socket#2 | 30-59
	Socket#3 | 90-119

	Then llc_shared_mask of CPU#30 becomes
	0x3fff8000fffffffc0000000. It means that last level cache of
	Socket#2 is shared with CPU#30-59 and 90-104. So the mask has
	the wrong value.
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: NLinn Crosetto <linn@hp.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit 9cb0e394.

It causes my Sony Vaio Pro 11 to immediately reboot at startup.
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 20cde694 ("x86, ia64: Move EFI_FB vga_default_device()
initialization to pci_vga_fixup()") moved boot video device detection from
efifb to x86 and ia64 pci/fixup.c.

For dual-GPU Apple computers above change represents a regression as code
in efifb did forcefully override vga_default_device while the merge did not
(vgaarb happens prior to PCI fixup).

To improve on initial device selection by vgaarb (it cannot know if PCI
device not behind bridges see/decode legacy VGA I/O or not), move the
screen_info based check from pci_video_fixup() to vgaarb's init function and
use it to refine/override decision taken while adding the individual PCI
VGA devices.  This way PCI fixup has no reason to adjust vga_default_device
anymore but can depend on its value for flagging shadowed VBIOS.

This has the nice benefit of removing duplicated code but does introduce a
#if defined() block in vgaarb.  Not all architectures have screen_info and
would cause compile to fail without it.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461Reported-and-Tested-By: NAndreas Noever <andreas.noever@gmail.com>
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org # v3.5+

It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.

This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.

NOTE! Even for x86, this really is kind of wrong.  If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies.  This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.

This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When RANDOMIZE_BASE (KASLR) is enabled; or the sum of all loaded
modules exceeds 512 MiB, then loading modules fails with a warning
(and hence a vmalloc allocation failure) because the PTEs for the
newly-allocated vmalloc address space are not zero.

  WARNING: CPU: 0 PID: 494 at linux/mm/vmalloc.c:128
           vmap_page_range_noflush+0x2a1/0x360()

This is caused by xen_setup_kernel_pagetables() copying
level2_kernel_pgt into level2_fixmap_pgt, overwriting many non-present
entries.

Without KASLR, the normal kernel image size only covers the first half
of level2_kernel_pgt and module space starts after that.

L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[  0..255]->kernel
                                                  [256..511]->module
                          [511]->level2_fixmap_pgt[  0..505]->module

This allows 512 MiB of of module vmalloc space to be used before
having to use the corrupted level2_fixmap_pgt entries.

With KASLR enabled, the kernel image uses the full PUD range of 1G and
module space starts in the level2_fixmap_pgt. So basically:

L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[0..511]->kernel
                          [511]->level2_fixmap_pgt[0..505]->module

And now no module vmalloc space can be used without using the corrupt
level2_fixmap_pgt entries.

Fix this by properly converting the level2_fixmap_pgt entries to MFNs,
and setting level1_fixmap_pgt as read-only.

A number of comments were also using the the wrong L3 offset for
level2_kernel_pgt.  These have been corrected.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org

This fixes a compilation error in clang in that a linker section
attribute can't be added to a type:

  arch/x86/mm/mmap.c:34:8: error: '__section__' attribute only applies to functions and global variables struct __read_mostly
  ...

By moving the section attribute to the variable declaration, the
desired effect is achieved.
Signed-off-by: NJan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409959005-11479-1-git-send-email-behanw@converseincode.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Maarten reported that his Macbook pro 8.2 stopped booting after commit
f23cf8bd ("efi/x86: efistub: Move shared dependencies to
<asm/efi.h>"), the main feature of which is changing the visibility of
symbol 'efi_early' from local to global.

By making 'efi_early' global we end up requiring an entry in the Global
Offset Table. Unfortunately, while we do include code to fixup GOT
entries in the early boot code, it's only called after we've executed
the EFI boot stub.

What this amounts to is that references to 'efi_early' in the EFI boot
stub don't point to the correct place.

Since we've got multiple boot entry points we need to be prepared to
fixup the GOT in multiple places, while ensuring that we never do it
more than once, otherwise the GOT entries will still point to the wrong
place.
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Mantas found that after commit 4bf7111f ("x86/efi: Support initrd
loaded above 4G"), the kernel freezes at the earliest possible moment
when trying to boot via UEFI on Asus laptop.

Revert to old way to load initrd under 4G on first try, second try will
use above 4G buffer when initrd is too big and does not fit under 4G.

[ The cause of the freeze appears to be a firmware bug when reading
  file data into buffers above 4GB, though the exact reason is unknown.
  Mantas reports that the hang can be avoid if the file size is a
  multiple of 512 bytes, but I've seen some ASUS firmware simply
  corrupting the file data rather than freezing.

  Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013
  which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe:
  fix source/destination pointer of overrun transfer").

  Whatever the cause, it's unlikely that a fix will be forthcoming
  from the vendor, hence the workaround - Matt ]

Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: NMantas Mikulėnas <grawity@gmail.com>
Reported-by: NHarald Hoyer <harald@redhat.com>
Tested-by: NAnders Darander <anders@chargestorm.se>
Tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We should classify the espfix area as such only if we actually have
enabled the corresponding option. Otherwise the page table dump might
look confusing.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Link: http://lkml.kernel.org/r/1410114629-24523-1-git-send-email-minipli@googlemail.com
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Commit 9eabc99a causes following build error when
IOAPIC is disabled.
   arch/x86/pci/irq.c: In function 'pirq_disable_irq':
>> arch/x86/pci/irq.c:1259:2: error: implicit declaration of function 'mp_should_keep_irq' [-Werror=implicit-function-declaration]
     if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
     ^
   cc1: some warnings being treated as errors
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1409382916-10649-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Without this patch the kexec-purgatory.c and purgatory.ro files are not
removed after make mrproper.
Signed-off-by: NMichael Welling <mwelling@ieee.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thomas reported that build of x86_64 kernel was failing for him.  He is
using 32bit tool chain.

Problem is that while compiling purgatory, I have not specified -m64
flag.  And 32bit tool chain must be assuming -m32 by default.

Following is error message.

(mini) [~/work/linux-2.6] make
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/config/kernel.release
  UPD     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  UPD     include/generated/utsrelease.h
  CC      arch/x86/purgatory/purgatory.o
arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in
the 32 bit mode

Fix it by explicitly passing appropriate -m64/-m32 build flag for
purgatory.
Reported-by: NThomas Glanzmann <thomas@glanzmann.de>
Tested-by: NThomas Glanzmann <thomas@glanzmann.de>
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y.  But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large.  This option seems
to be available only gcc 4.4 onwards.

Hiding new functionality behind a new config option will not break
existing users of old gcc.  Those who wish to enable new functionality
will require new gcc.  Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.

I think there are other advantages of introducing this new config
option.  As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used.  This
new code selects CRYPTO=y and CRYPTO_SHA256=y.  And all other arches had
to do this for CONFIG_KEXEC.  Now with introduction of new config
option, we can remove crypto dependency from other arches.

Now CONFIG_KEXEC_FILE is available only on x86_64.  So whereever I had
CONFIG_X86_64 defined, I got rid of that.

For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y".  This should be safer as "select" is not
recursive.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: NShaun Ruffell <sruffell@digium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at
mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each
dump a register or a stack slot showed d2001730 or d2000730: pte flags
0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has
a hole between cfffffff and 100000000, which would need special access.

Commit c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on
the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL
pte no longer passes the pte_special() test, so zap_pte_range() goes on
to try to access a non-existent struct page.

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to
complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).  A
hint that this was a problem was that c46a7c81 added pte_numa() test
to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast
path: This was papering over a pte_special() snag when the zero page was
encountered during zap.  This patch reverts vm_normal_page() to how it
was before, relying on pte_special().

It still appears that this patch may be incomplete: aren't there other
places which need to be handling PROTNONE along with PRESENT?  For
example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a
PROT_NONE area, that would make it pte_special().  This is side-stepped
by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there
are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be
interesting.

Fixes: c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Tested-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: <stable@vger.kernel.org>	[3.16]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during runtime power
management, otherwise it may cause failure of device wakeups.

Commit 3eec5952 "x86, irq, PCI: Keep IRQ assignment for PCI
devices during suspend/hibernation" has fixed the issue for suspend/
hibernation, we also need the same fix for runtime device sleep too.

Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271Reported-and-Tested-by: NEmanueL Czirai <amanual@openmailbox.org>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: EmanueL Czirai <amanual@openmailbox.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch frees the 'optinsn' slot when we get a range check error,
to prevent memory leaks.

Before this patch, cache entry in kprobe_insn_cache() won't be freed
if kprobe optimizing fails due to range check failure.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Pei Feiyue <peifeiyue@huawei.com>
Link: http://lkml.kernel.org/r/1406550019-70935-1-git-send-email-wangnan0@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 15a3c7cc "x86, irq: Introduce two helper functions
to support irqdomain map operation" breaks LPSS ACPI enumerated
devices.

On startup, IOAPIC driver preallocates IRQ descriptors and programs
IOAPIC pins with default level and polarity attributes for all legacy
IRQs. Later legacy IRQ users may fail to set IOAPIC pin attributes
if the requested attributes conflicts with the default IOAPIC pin
attributes. So change mp_irqdomain_map() to allow the first legacy IRQ
user to reprogram IOAPIC pin with different attributes.
Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1409118795-17046-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Upstream commit:

  95d76acc ("x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY")

removed reserved interrupts for the platforms that do not have a legacy IOAPIC.

Which breaks the boot on Intel MID platforms such as Medfield:

  BUG: unable to handle kernel NULL pointer dereference at 0000003a
  IP: [<c107079a>] setup_irq+0xf/0x4d [    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510

The culprit is an uncoditional setting of IRQ2 which is used
as cascade IRQ on legacy platforms. It seems we have to check
if we have enough legacy IRQs reserved before we can call
setup_irq().

The fix adds such check in native_init_IRQ() and in setup_default_timer_irq().
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NJiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1405931920-12871-1-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit 682367c4,
which causes 32-bit SMP Windows 7 guests to panic.

SeaBIOS has a limit on the number of MTRRs that it can handle,
and this patch exceeded the limit.  Better revert it.
Thanks to Nadav Amit for debugging the cause.

Cc: stable@nongnu.org
Reported-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts the check added by commit 5045b468 (KVM: x86: check CS.DPL
against RPL during task switch, 2014-05-15).  Although the CS.DPL=CS.RPL
check is mentioned in table 7-1 of the SDM as causing a #TSS exception,
it is not mentioned in table 6-6 that lists "invalid TSS conditions"
which cause #TSS exceptions. In fact it causes some tests to fail, which
pass on bare-metal.

Keep the rest of the commit, since we will find new uses for it in 3.18.
Reported-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit d40a6898 mistakenly caused instructions which are not marked as
EmulateOnUD to be emulated upon #UD exception. The commit caused the check of
whether the instruction flags include EmulateOnUD to never be evaluated. As a
result instructions whose emulation is broken may be emulated.  This fix moves
the evaluation of EmulateOnUD so it would be evaluated.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
[Tweak operand order in &&, remove EmulateOnUD where it's now superfluous.
 - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Power efficiency improves on Baytrail (Intel Atom Processor E3000)
when Linux disables C6 auto-demotion.

Based on work by Srinidhi Kasagar <srinidhi.kasagar@intel.com>.
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: x86@kernel.org

commit 554086d8 "x86_32, entry: Do syscall exit work on badsys
(CVE-2014-4508)" introduced a new jump label (sysenter_badsys) but
somehow the END statements seem to have gone wrong (at least it
feels that way to me).
This does not seem to be a fatal problem, but just for the sake
of symmetry, change the second syscall_badsys to sysenter_badsys.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Link: http://lkml.kernel.org/r/1408093066-31021-1-git-send-email-stefan.bader@canonical.comAcked-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Commit b7dd0e35 (x86/xen: safely map and unmap grant frames when
in atomic context) causes PVH guests to crash in
arch_gnttab_map_shared() when they attempted to map the pages for the
grant table.

This use of a PV-specific function during the PVH grant table setup is
non-obvious and not needed.  The standard vmap() function does the
right thing.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reported-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Tested-by: NMukesh Rathor <mukesh.rathor@oracle.com>
Cc: stable@vger.kernel.org

If the timer irqs are resumed during device resume it is possible in
certain circumstances for the resume to hang early on, before device
interrupts are resumed.  For an Ubuntu 14.04 PVHVM guest this would
occur in ~0.5% of resume attempts.

It is not entirely clear what is occuring the point of the hang but I
think a task necessary for the resume calls schedule_timeout(),
waiting for a timer interrupt (which never arrives).  This failure may
require specific tasks to be running on the other VCPUs to trigger
(processes are not frozen during a suspend/resume if PREEMPT is
disabled).

Add IRQF_EARLY_RESUME to the timer interrupts so they are resumed in
syscore_resume().
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org

A sparse warning is generated about
'tlb_single_page_flush_ceiling' not being declared.

  arch/x86/mm/tlb.c:177:15: warning: symbol
  'tlb_single_page_flush_ceiling' was not declared. Should it be static?

Since it isn't used anywhere outside this file, fix the warning
by making it static.

Also, optimize the use of this variable by adding the
__read_mostly directive, as suggested by David Rientjes.
Suggested-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJeremiah Mahler <jmmahler@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/1407569913-4035-1-git-send-email-jmmahler@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is the final piece of the puzzle of verifying kernel image signature
during kexec_file_load() syscall.

This patch calls into PE file routines to verify signature of bzImage.  If
signature are valid, kexec_file_load() succeeds otherwise it fails.

Two new config options have been introduced.  First one is
CONFIG_KEXEC_VERIFY_SIG.  This option enforces that kernel has to be
validly signed otherwise kernel load will fail.  If this option is not
set, no signature verification will be done.  Only exception will be when
secureboot is enabled.  In that case signature verification should be
automatically enforced when secureboot is enabled.  But that will happen
when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.

I tested these patches with both "pesign" and "sbsign" signed bzImages.

I used signing_key.priv key and signing_key.x509 cert for signing as
generated during kernel build process (if module signing is enabled).

Used following method to sign bzImage.

pesign
======
- Convert DER format cert to PEM format cert
openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform
PEM

- Generate a .p12 file from existing cert and private key file
openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in
signing_key.x509.PEM

- Import .p12 file into pesign db
pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign

- Sign bzImage
pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign
-c "Glacier signing key - Magrathea" -s

sbsign
======
sbsign --key signing_key.priv --cert signing_key.x509.PEM --output
/boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+

Patch details:

Well all the hard work is done in previous patches.  Now bzImage loader
has just call into that code and verify whether bzImage signature are
valid or not.

Also create two config options.  First one is CONFIG_KEXEC_VERIFY_SIG.
This option enforces that kernel has to be validly signed otherwise kernel
load will fail.  If this option is not set, no signature verification will
be done.  Only exception will be when secureboot is enabled.  In that case
signature verification should be automatically enforced when secureboot is
enabled.  But that will happen when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch does two things.  It passes EFI run time mappings to second
kernel in bootparams efi_info.  Second kernel parse this info and create
new mappings in second kernel.  That means mappings in first and second
kernel will be same.  This paves the way to enable EFI in kexec kernel.

This patch also prepares and passes EFI setup data through bootparams.
This contains bunch of information about various tables and their
addresses.

These information gathering and passing has been written along the lines
of what current kexec-tools is doing to make kexec work with UEFI.

[akpm@linux-foundation.org: s/get_efi/efi_get/g, per Matt]
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for loading a kexec on panic (kdump) kernel usning
new system call.

It prepares ELF headers for memory areas to be dumped and for saved cpu
registers.  Also prepares the memory map for second kernel and limits its
boot to reserved areas only.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is loader specific code which can load bzImage and set it up for
64bit entry.  This does not take care of 32bit entry or real mode entry.

32bit mode entry can be implemented if somebody needs it.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Load purgatory code in RAM and relocate it based on the location.
Relocation code has been inspired by module relocation code and purgatory
relocation code in kexec-tools.

Also compute the checksums of loaded kexec segments and store them in
purgatory.

Arch independent code provides this functionality so that arch dependent
bootloaders can make use of it.

Helper functions are provided to get/set symbol values in purgatory which
are used by bootloaders later to set things like stack and entry point of
second kernel etc.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create a stand alone relocatable object purgatory which runs between two
kernels.  This name, concept and some code has been taken from
kexec-tools.  Idea is that this code runs after a crash and it runs in
minimal environment.  So keep it separate from rest of the kernel and in
long term we will have to practically do no maintenance of this code.

This code also has the logic to do verify sha256 hashes of various
segments which have been loaded into memory.  So first we verify that the
kernel we are jumping to is fine and has not been corrupted and make
progress only if checsums are verified.

This code also takes care of copying some memory contents to backup region.

[sfr@canb.auug.org.au: run host built programs from objtree]
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Next two patches provide code for purgatory.  This is a code which does
not link against the kernel and runs stand alone.  This code runs between
two kernels.  One of the primary purpose of this code is to verify the
digest of newly loaded kernel and making sure it matches the digest
computed at kernel load time.

We use sha256 for calculating digest of kexec segmetns.  Purgatory can't
use stanard crypto API as that API is not available in purgatory context.

Hence, I have copied code from crypto/sha256_generic.c and compiled it
with purgaotry code so that it could be used.  I could not #include
sha256_generic.c file here as some of the function signature requiered
little tweaking.  Original functions work with crypto API but these ones
don't

So instead of doing #include on sha256_generic.c I just copied relevant
portions of code into arch/x86/purgatory/sha256.c.  Now we shouldn't have
to touch this code at all.  Do let me know if there are better ways to
handle it.

This patch does not enable compiling of this code.  That happens in next
patch.  I wanted to highlight this change in a separate patch for easy
review.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previous patch provided the interface definition and this patch prvides
implementation of new syscall.

Previously segment list was prepared in user space.  Now user space just
passes kernel fd, initrd fd and command line and kernel will create a
segment list internally.

This patch contains generic part of the code.  Actual segment preparation
and loading is done by arch and image specific loader.  Which comes in
next patch.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the new syscall kexec_file_load() declaration/interface.  I have
reserved the syscall number only for x86_64 so far.  Other architectures
(including i386) can reserve syscall number when they enable the support
for this new syscall.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

currently bin2c builds only if CONFIG_IKCONFIG=y. But bin2c will now be
used by kexec too.  So make it compilation dependent on CONFIG_BUILD_BIN2C
and this config option can be selected by CONFIG_KEXEC and CONFIG_IKCONFIG.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memfd_create() is similar to mmap(MAP_ANON), but returns a file-descriptor
that you can pass to mmap().  It can support sealing and avoids any
connection to user-visible mount-points.  Thus, it's not subject to quotas
on mounted file-systems, but can be used like malloc()'ed memory, but with
a file-descriptor to it.

memfd_create() returns the raw shmem file, so calls like ftruncate() can
be used to modify the underlying inode.  Also calls like fstat() will
return proper information and mark the file as regular file.  If you want
sealing, you can specify MFD_ALLOW_SEALING.  Otherwise, sealing is not
supported (like on all other regular files).

Compared to O_TMPFILE, it does not require a tmpfs mount-point and is not
subject to a filesystem size limit.  It is still properly accounted to
memcg limits, though, and to the same overcommit or no-overcommit
accounting as all user memory.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace obsolete strict_strto calls with appropriate kstrto calls
Signed-off-by: NDaniel Walter <dwalter@google.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>