The code already got unwieldy and we want to dump more per-ring
registers.

Only functional change is that we now also capture the video
ring registers on ilk.

v2: fixup a refactor fumble spotted by Chris Wilson.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... and add a helpr function for the places where we want a flag.

This way we can use ring->id to index into arrays.

v2: Resurrect the missing beautification-space Chris Wilson noted.
I'm moving this space around because I'll reuse ring_str in the next
patch.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It should be programmed to "0" for HDMI or "1" for DisplayPort.

This enables DisplayPort audio for

- HP EliteBook 8460p
  (whose BIOS does not set the N_value_index bit for us)

- DisplayPort monitor hot plugged after boot
  (otherwise most BIOS will fill the N_value_index bit for us)
Tested-by: NRobert Lemaire <rlemaire@suse.com>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is only relevant when using module unloading, and really only helps
get rid of a probably benign warning.

I can't remember if I sent this out already, but it's not turning up in
any of my searches.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After the ILK vt-d workaround patches it became clear that we had
introduced a bug.  Chris Wilson tracked down the issue to recursive
calls to unmap. This happens because we try to optimize waiting on
requests by calling retire requests after the wait, which may drop the
last reference on an object and end up freeing the object (and then
unmap the object from the gtt).

After the last patch we can now choose to defer processing the retire
list.

Kudos to Chris Wilson for tracking this one down.

This patch fixes gem_unref_active_buffers from i-g-t. It was tested by
forcing do_idle_maps to true.

This also fixes tests/gem_linear_blits in intel-gpu-tools.

Reported-by: guang.a.yang@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes it may be the case when we idle the gpu or wait on something
we don't actually want to process the retiring list. This patch allows
callers to choose the behavior.
Reviewed-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Older specs claimed this was bit 11, but newer specs and the actual
simulator code say it was bit 12.  Regardless, we don't use MI_FLUSH,
or try to enable it any more.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Anyone trying to use this bit, please read all the relevant
discussions, it's epic.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have always been using the wrong bit -- it's bit 12.  However, the
bit also doesn't do anything -- hardware has always accepted the
MI_FLUSH command even when it was specced not to.

Given that there is only one MI_FLUSH emitted in all of the driver
stack on gen6+ (in i965_video.c of the 2d driver, and it should be
using other code to do its flush instead), just remove the MI_FLUSH
enable instead of trying to fix it.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was completely spamming dmesg on my i855gm. This issue was just
shortly introduced with:

commit 931872fc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Jan 16 23:01:13 2012 +0000

    drm/i915: Check that plane/pipe is disabled before removing the fb
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, we are left with pretty bogus message saying that the pixel
format is not supported while leaving the details to the telepatic powers.

v2: use DRM_DEBUG_KMS instead of DRM_ERROR
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we're using the sprite WM fields, we need to take care not to
clobber them in the main update_wm functions.  While we're at it, make
sure we mask out the old sprite wm value before or'ing in the new one
when the sprite wm is updated.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've reviewed gen2 pageflip code to hunt down multiple prepare pageflip
issues. The only thing I've found is a slight but functionally
meaningless confusion about the length of the mi cmd.

Fix it up and add a comment about what this dword should be (according
to docs at least).
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

LLC is not SNB/IVB-specific, so we should check for it in a more generic
way.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some decent history digging indicates that this was to be used for the
GLX_MESA_allocate_memory extension but never actually implemented for
any released i915 userspace code.

So just rip it out.

v2: Fixup the Makefile.
Acked-by: NDave Airlie <airlied@gmail.com>
Cc: Keith Whitwell <keithw@vmware.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is paranoid, but I am entirely willing to believe the hardware
could come up with a condition where I get a status with both the 'done'
and 'receive error' bits set.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The default in the Sandybridge docs is 5, as on Ironlake, and I have no
reason to believe 3 would work any better.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Matches the advice in the Sandybridge documentation.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There is an error in i915_read_blc_pwm_ctl, where the register values
are not being copied correctly.  BLC_PWM_CTL and BLC_PWM_CTL2 are
getting mixed up.  This patch fixes that so that saveBLC_PWM_CTL2 and
not saveBLC_PWM_CTL is copied to the BLC_PWM_CTL2 register.
Signed-off-by: NSimon Que <sque@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Staring at an error state such as:

PGTBL_ER: 0x00000400
    Display B: Invalid tiling
fence[0] = 05001001
    valid, x-tiled, pitch: 512, start: 0x05000000, size: 1048576
Pinned [2]:
  00000000   131072 0001 0001 00000000 P uncached
  00020000  4096000 0041 0000 00000000 P uncached (name: 1)
Plane [1]:
  CNTR: c0000000 # enabled | gamma
  STRIDE: 00001400
  SIZE: 03ff04ff
  POS: 00000000
  ADDR: 05000000

Suggests that we did not clear the DSPBCNTR prior to unpinning the
framebuffer and reusing the GTT space. Impossible! Unless our DPMS
bookkeeping ran afoul again...

In the meantime add an assertion that the plane is decoupled from the
framebuffer prior to release.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix function name in comments, a left-over from when i965_reset was
renamed to i915_reset.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This cleans up the mode set path a little further, making it easier to
extend for future platforms.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: shut up stupid gcc warning about potential use of
un-initlized fp2]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Makes the mode set routine a little cleaner and easier to extend.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After checking the specs and discussing with Jesse, turns out CxSR is not
available on Ironlake and gen5, and its advertisement on the device
description is misleading.
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch enforces that the downclock clock source is the same as the preferred
clock source for LVDS. This fixes a bug where the driver chooses a downclock
clock source with a different P than the preferred mode clock source. This
happened even if the preferred clock source implemented an acceptable rate for
the downclock. The result of this bug is that downclock is disabled.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

<@ajax> mjg59: how concerned should i be about [drm:intel_dsm_pci_probe]
        *ERROR* failed to get supported _DSM functions ?
<@mjg59> ajax: Entirely unconcerned
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add a cast here to silence a Gcc warning.
drivers/gpu/drm/gma500/mid_bios.c:214:28: warning:
  cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The "if (!p && !p->dev)" condition isn't right because || was intended
instead of &&.  But actually, "p" is the list cursor and so it's always
non-NULL and we can just remove that bit.  We can remove the another
similar check as well.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The second lock should be an unlock or it causes a deadlock.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

"bo_va" is dereferenced in the error message.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fallout from my "kill drm_sman" refactor. Unfortunately gcc seems to
have failed me and not warned about this.

Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> (on via)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add a VM manager enabled field and use it to check if
vm is enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: jglisse@redhat.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

So we have a few places where the drm drivers would like to sleep to
be nice to the system, mainly in the modesetting paths, but we also
have two cases were atomic modesetting must take place, panic writing
and kernel debugger. So provide a central inline to determine if a
sleep or delay should be used and use this in the intel and radeon drivers.

v2: drop intel_drv.h MSLEEP macro, nobody uses it.

Based on patch from Michel Dänzer <michel.daenzer@amd.com>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43941Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It would previously write basically random bits to PCI configuration space...
Not very surprising that the GPU tended to stop responding completely. The
resulting MCE even froze the whole machine sometimes.

Now resetting the GPU after a lockup has at least a fighting chance of
succeeding.

Cc: stable@vger.kernel.org
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

ttm tt rework modified the way we allocate and populate the
ttm_tt structure, the AGP side was missing some bit to properly
work. Fix those and fix radeon and nouveau AGP support.

Tested on radeon only so far.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and don't try to free freed pages.

The code to figure out how many pages to shrink the pool
ends up capping the 'count' at _manager->options.max_size - which is OK.
Except that the 'count' is also used when accounting for how many pages
are recycled - which we end up with the invalid values. This fixes
it by using a different value for the amount of pages to shrink.

On top of that we would free the cached page pool - which is nonsense
as they are deleted from the pool - so there are no free pages in that
pool..

Also we also missed the opportunity to batch the amount of pages
to free (similar to how ttm_page_alloc.c does it). This reintroduces
the code that was lost during rebasing.
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>