- 30 11月, 2016 16 次提交
-
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The fsid and chunk tree uuid are always located in the first page, we don't need the to use write_extent_buffer. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
__bdev' has never been used since 0b86a832 (2008). Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
During the time, the function has been shrunk to the point that it just calls find_extent_buffer, just passing the parameters. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We dereference fs_info several times, besides that post-mount functions should never see a NULL fs_info. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The lock is held, we make the same lookup that previously failed with EEXIST and we don't insert NULL pointers. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Originally, the eb and start were passed separately in case eb is NULL. Since the readahead has been refactored in 4.6, this is not true anymore and we can get rid of the parameter. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
'start' is not used since "btrfs: reada: Pass reada_extent into __readahead_hook directly" (6e39dbe8). Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We can't touch the eb directly in case the function is called with a non-zero error, so we can read the eb level when needed. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The helpers are not meant to be generic, the name is misleading. Convert them to static inlines for type checking. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Xiaoguang Wang 提交于
Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely") Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Adam Borowski 提交于
They're not even documented anywhere, letting users with no recourse but to RTFS. It's no big burden to output the bitfield as words. Also, display unknown flags as hex. Signed-off-by: NAdam Borowski <kilobyte@angband.pl> Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Omar Sandoval 提交于
My QEMU VM was seeing inexplicable I/O errors that I tracked down to errors coming from the qcow2 virtual drive in the host system. The qcow2 file is a nocow file on my Btrfs drive, which QEMU opens with O_DIRECT. Every once in awhile, pread() or pwrite() would return EEXIST, which makes no sense. This turned out to be a bug in btrfs_get_extent(). Commit 8dff9c85 ("Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent") fixed a case in btrfs_get_extent() where two threads race on adding the same extent map to an inode's extent map tree. However, if the added em is merged with an adjacent em in the extent tree, then we'll end up with an existing extent that is not identical to but instead encompasses the extent we tried to add. When we call merge_extent_mapping() to find the nonoverlapping part of the new em, the arithmetic overflows because there is no such thing. We then end up trying to add a bogus em to the em_tree, which results in a EEXIST that can bubble all the way up to userspace. Fix it by extending the identical extent map special case. Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Wang Xiaoguang 提交于
Tickets_id's name may result in some misunderstandings, it just indicates the next ticket will be handled and is not stored per ticket. Fixes: ce129655 ("btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress") Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 29 11月, 2016 2 次提交
-
-
由 Wang Xiaoguang 提交于
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Christoph Hellwig 提交于
btrfs_map_block supports different types of mappings, which to a large extent resemble block layer operations. But they don't always do, and currently btrfs dangerously overlays it's own flag over the block layer flags. This is just asking for a conflict, so introduce a different map flags enum inside of btrfs instead. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 28 11月, 2016 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/intel-iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from David Woodhouse: "Two minor fixes. The first fixes the assignment of SR-IOV virtual functions to the correct IOMMU unit, and the second fixes the excessively large (and physically contiguous) PASID tables used with SVM" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix PASID table allocation iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.9: - Fix unreadable output in __do_page_fault due to the KERN_CONT patchset - Correctly handle MIPS R6 fixes to the c0_wired register" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mm: Fix output of __do_page_fault MIPS: Mask out limit field when calculating wired entry count
-
- 27 11月, 2016 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs splice fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix default_file_splice_read()
-
由 Al Viro 提交于
Botched calculation of number of pages. As the result, we were dropping pieces when doing splice to pipe from e.g. 9p. Reported-by: NAlexei Starovoitov <ast@kernel.org> Tested-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Here is a revert and two bugfixes for the I2C designware driver. Please note that we are still hunting down a regression for the i2c-octeon driver. While there is a fix pending, we have unclear feedback from the testers currently. An rc8 would be quite helpful for this case" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: designware: do not disable adapter after transfer" i2c: designware: fix rx fifo depth tracking i2c: designware: report short transfers
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "This resolves the ksyms issues by reverting the commit which introduced the breakage" There was what I consider to be a better fix, but it's late in the rc game, so I'll take the revert. * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: Revert "arm: move exports to definitions"
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix leak in fsl/fman driver, from Dan Carpenter. 2) Call flow dissector initcall earlier than any networking driver can register and start to use it, from Eric Dumazet. 3) Some dup header fixes from Geliang Tang. 4) TIPC link monitoring compat fix from Jon Paul Maloy. 5) Link changes require EEE re-negotiation in bcm_sf2 driver, from Florian Fainelli. 6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman Mashak. 7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) tipc: resolve connection flow control compatibility problem mvpp2: use correct size for memset net/mlx5: drop duplicate header delay.h net: ieee802154: drop duplicate header delay.h ibmvnic: drop duplicate header seq_file.h fsl/fman: fix a leak in tgec_free() net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS tipc: improve sanity check for received domain records tipc: fix compatibility bug in link monitoring net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented dwc_eth_qos: drop duplicate headers net sched filters: fix filter handle ID in tfilter_notify_chain() net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change bnxt: do not busy-poll when link is down udplite: call proper backlog handlers ipv6: bump genid when the IFA_F_TENTATIVE flag is clear net/mlx4_en: Free netdev resources under state lock net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit" rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit() bnxt_en: Fix a VXLAN vs GENEVE issue ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: - Fix a crash that occurs at driver initialization if the memory region is already busy (request_mem_region() fails). - Fix a vma validation check that mistakenly allows a private device- dax mapping to be established. Device-dax explicitly forbids private mappings so it can guarantee a given fault granularity and backing memory type. Both of these fixes have soaked in -next and are tagged for -stable. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fail all private mapping attempts device-dax: check devm_nsio_enable() return value
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "Four fixes for bugs found by syzkaller on x86, all for stable" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check for pic and ioapic presence before use KVM: x86: fix out-of-bounds accesses of rtc_eoi map KVM: x86: drop error recovery in em_jmp_far and em_ret_far KVM: x86: fix out-of-bounds access in lapic
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Set missing wakeup bit in LPCR on POWER9 - Fix the early OPAL console wrappers - Fixup kernel read only mapping Fixes for code merged this cycle: - Fix missing CRCs, add more asm-prototypes.h declarations" * tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fixup kernel read only mapping powerpc/boot: Fix the early OPAL console wrappers powerpc: Fix missing CRCs, add more asm-prototypes.h declarations powerpc: Set missing wakeup bit in LPCR on POWER9
-
- 26 11月, 2016 11 次提交
-
-
由 Jon Paul Maloy 提交于
In commit 10724cc7 ("tipc: redesign connection-level flow control") we replaced the previous message based flow control with one based on 1k blocks. In order to ensure backwards compatibility the mechanism falls back to using message as base unit when it senses that the peer doesn't support the new algorithm. The default flow control window, i.e., how many units can be sent before the sender blocks and waits for an acknowledge (aka advertisement) is 512. This was tested against the previous version, which uses an acknowledge frequency of on ack per 256 received message, and found to work fine. However, we missed the fact that versions older than Linux 3.15 use an acknowledge frequency of 512, which is exactly the limit where a 4.6+ sender will stop and wait for acknowledge. This would also work fine if it weren't for the fact that if the first sent message on a 4.6+ server side is an empty SYNACK, this one is also is counted as a sent message, while it is not counted as a received message on a legacy 3.15-receiver. This leads to the sender always being one step ahead of the receiver, a scenario causing the sender to block after 512 sent messages, while the receiver only has registered 511 read messages. Hence, the legacy receiver is not trigged to send an acknowledge, with a permanently blocked sender as result. We solve this deadlock by simply allowing the sender to send one more message before it blocks, i.e., by a making minimal change to the condition used for determining connection congestion. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
gcc-7 detects a short memset in mvpp2, introduced in the original merge of the driver: drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init': drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size] The result seems to be that we write uninitialized data into the flow table registers, although we did not get any warning about that uninitialized data usage. Using sizeof() lets us initialize then entire array instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
Drop duplicate header delay.h from mlx5/core/main.c. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Acked-by: NMatan Barak <matanb@mellanox.com> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
Drop duplicate header delay.h from adf7242.c. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Acked-by: NStefan Schmidt <stefan@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geliang Tang 提交于
Drop duplicate header seq_file.h from ibmvnic.c. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We set "tgec->cfg" to NULL before passing it to kfree(). There is no need to set it to NULL at all. Let's just delete it. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Miroslav Lichvar 提交于
The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET command and likewise it shouldn't require the CAP_NET_ADMIN capability. Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In commit 35c55c98 ("tipc: add neighbor monitoring framework") we added a data area to the link monitor STATE messages under the assumption that previous versions did not use any such data area. For versions older than Linux 4.3 this assumption is not correct. In those version, all STATE messages sent out from a node inadvertently contain a 16 byte data area containing a string; -a leftover from previous RESET messages which were using this during the setup phase. This string serves no purpose in STATE messages, and should no be there. Unfortunately, this data area is delivered to the link monitor framework, where a sanity check catches that it is not a correct domain record, and drops it. It also issues a rate limited warning about the event. Since such events occur much more frequently than anticipated, we now choose to remove the warning in order to not fill the kernel log with useless contents. We also make the sanity check stricter, to further reduce the risk that such data is inavertently admitted. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
commit 81729810 ("tipc: fix link priority propagation") introduced a compatibility problem between TIPC versions newer than Linux 4.6 and those older than Linux 4.4. In versions later than 4.4, link STATE messages only contain a non-zero link priority value when the sender wants the receiver to change its priority. This has the effect that the receiver resets itself in order to apply the new priority. This works well, and is consistent with the said commit. However, in versions older than 4.4 a valid link priority is present in all sent link STATE messages, leading to cyclic link establishment and reset on the 4.6+ node. We fix this by adding a test that the received value should not only be valid, but also differ from the current value in order to cause the receiving link endpoint to reset. Reported-by: NAmar Nv <amar.nv005@gmail.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it actually does not. The hardware probably does support it, but there is no code to configure the filter. As a quick and simple fix, remove the flag. This will cause the core to fall back to promiscuous mode. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Fixes: b50b72de ("net: mvneta: enable features before registering the driver") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "On parisc we were still seeing occasional random segmentation faults and memory corruption on SMP machines. Dave Anglin then looked again at the TLB related code and found two issues in the PCI DMA and generic TLB flush functions. Then, in our startup code we had some timing of the cache and TLB functions to calculate a threshold when to use a complete TLB/cache flush or just to flush a specific range. This code produced a race with newly started CPUs and thus lead to occasional kernel crashes (due to stale TLB/cache entries). The patch by Dave fixes this issue by flushing the local caches before starting secondary CPUs and by removing the race. The last problem fixed by this series is that we quite often suffered from hung tasks and self-detected stalls on the CPUs. It was somehow clear that this was related to the (in v4.7) newly introduced cr16 clocksource and the own implementation of sched_clock(). I replaced the open-coded sched_clock() function and switched to the generic sched_clock() implementation which seems to have fixed this isse as well. All patches have been sucessfully tested on a variety of machines, including our debian buildd servers. All patches (beside the small pr_cont fix) are tagged for stable releases" * 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Also flush data TLB in flush_icache_page_asm parisc: Fix race in pci-dma.c parisc: Switch to generic sched_clock implementation parisc: Fix races in parisc_setup_cache_timing() parisc: Fix printk continuations in system detection
-