- 03 8月, 2018 1 次提交
-
-
由 Thomas Gleixner 提交于
The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8 ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: NKurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NKurt Kanzenbach <kurt.kanzenbach@linutronix.de> Cc: stable@vger.kernel.org
-
- 02 8月, 2018 8 次提交
-
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "Just a single fix this time around for recent binutils causing build problems when generating Thumb-2 code" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+
-
由 Linus Torvalds 提交于
Commit 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted that mmap_sem must be held when splitting an "anonymous" vma there. Whether that's still strictly true nowadays is not entirely clear, but the danger of sometimes crashing on the BUG is now fairly clear. Even with the new stricter rules for anonymous vma marking, the condition it checks for can possible trigger. Commit 44960f2a ("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages") is good, and originally I thought it was safe from that VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE) insists on VM_SHARED. But after I read John's earlier mail, drawing attention to the vfs_fallocate() in there: I may be wrong, and I don't know if Android has THP in the config anyway, but it looks to me like an unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely the VM_BUG_ON_VMA(), once it's vma_is_anonymous(). Signed-off-by: NHugh Dickins <hughd@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fix from Ulf Hansson: "MMC host: mxcmmc: Fix build error for powerpc" * tag 'mmc-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxcmmc: Fix missing parentheses and brace
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix the scope of a recent intel_pstate driver optimization used incorrectly on some systems due to processor identification ambiguity and fix a few issues in the turbostat utility, including three recent regressions. Specifics: - Use ACPI FADT preferred PM Profile to distinguish Skylake desktop processors from some server ones with the same model number in order to limit the scope of the recent IO-wait boost optimization to servers, as intended (Srinivas Pandruvada). - Fix several issues in the turbostat utility: * Fix the -S option on 1-CPU systems (Len Brown). * Fix computations using incorrect processor core counts (Artem Bityutskiy). * Fix the x2apic debug message (Len Brown). * Fix logical node enumeration to allow for non-sequential physical nodes (Prarit Bhargava). * Fix reported family on modern AMD processors (Calvin Walton). * Clarify the RAPL column information in the man page (Len Brown)" * tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
-
由 Linus Torvalds 提交于
Anatoly continues to find issues with fuzzed squashfs images. This time, corrupt, missing, or undersized data for the page filling wasn't checked for, because the squashfs_{copy,read}_cache() functions did the squashfs_copy_data() call without checking the resulting data size. Which could result in the page cache pages being incompletely filled in, and no error indication to the user space reading garbage data. So make a helper function for the "fill in pages" case, because the exact same incomplete sequence existed in two places. [ I should have made a squashfs branch for these things, but I didn't intend to start doing them in the first place. My historical connection through cramfs is why I got into looking at these issues at all, and every time I (continue to) think it's a one-off. Because _this_ time is always the last time. Right? - Linus ] Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Tested-by: NWilly Tarreau <w@1wt.eu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John Stultz 提交于
Amit Pundir and Youling in parallel reported crashes with recent mainline kernels running Android: F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** F DEBUG : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key F DEBUG : Revision: '0' F DEBUG : ABI: 'arm' F DEBUG : pid: 2261, tid: 2261, name: zygote >>> zygote <<< F DEBUG : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008 ... <snip> ... F DEBUG : backtrace: F DEBUG : #00 pc 00001c04 /system/lib/libc.so (memset+48) F DEBUG : #1 pc 0010c513 /system/lib/libart.so (create_mspace_with_base+82) F DEBUG : #2 pc 0015c601 /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40) F DEBUG : #3 pc 0015c3ed /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36) ... This was bisected back to commit bfd40eaf ("mm: fix vma_is_anonymous() false-positives"). create_mspace_with_base() in the trace above, utilizes ashmem, and with ashmem, for shared mappings we use shmem_zero_setup(), which sets the vma->vm_ops to &shmem_vm_ops. But for private ashmem mappings nothing sets the vma->vm_ops. Looking at the problematic patch, it seems to add a requirement that one call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be used. Using the dummy_vm_ops seem to triggger SIGBUS when traversing unmapped pages. Thus, this patch adds a call to vma_set_anonymous() for ashmem private mappings and seems to avoid the reported problem. Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives") Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Colin Cross <ccross@google.com> Cc: Matthew Wilcox <willy@infradead.org> Reported-by: NAmit Pundir <amit.pundir@linaro.org> Reported-by: NYouling 257 <youling257@gmail.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Commit bfd40eaf ("mm: fix vma_is_anonymous() false-positives") made newly allocated vma's have a dummy vm_ops field so that they wouldn't be mistaken for anonymous mappings, and if you wanted an anonymous vma you had to explicitly say so by calling "vma_set_anonymous()" on it. However, it missed the two special vmas that ia64 processes have: the register backing store and the NaT page. So they wouldn't actually act like anonymous ranges, and page faults on them caused a SIGBUS rather than the creation of a new anon page in them. That obviously will make any ia64 binary very unhappy indeed, and the boot fails early. Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives") Reported-by: NTony Luck <tony.luck@intel.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2018 5 次提交
-
-
由 Rafael J. Wysocki 提交于
Merge turbostat utility fixes for final 4.18: - Fix the -S option on 1-CPU systems. - Fix computations using incorrect processor core counts. - Fix the x2apic debug message. - Fix logical node enumeration to allow for non-sequential physical nodes. - Fix reported family on modern AMD processors. - Clarify the RAPL column information in the man page. * pm-tools: tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fix from Paul Moore: "A single small audit fix to guard against memory allocation failures when logging information about a kernel module load. It's small, easy to understand, and self-contained; while nothing is zero risk, this should be pretty low" * tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix potential null dereference 'context->module.name'
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Nine fixes, five in the qla2xxx driver, the most serious of which is the uninitialized list head crash which can be observed in most systems under a sufficiently loaded low memory environment. The two sg fixes are minor but obvious and two target ones which seem reasonable but not high impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Return error when TMF returns scsi: qla2xxx: Fix ISP recovery on unload scsi: qla2xxx: Fix driver unload by shutting down chip scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion scsi: qla2xxx: Fix unintialized List head crash scsi: sg: update comment for blk_get_request() scsi: sg: fix minor memory leak in error path scsi: libiscsi: fix possible NULL pointer dereference in case of TMF scsi: target: iscsi: cxgbit: fix max iso npdu calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio fixes from Michael Tsirkin: "Some bugfixes that seem important and safe enough to merge at the last minute" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix another race between migration and ballooning tools/virtio: add kmalloc_array stub tools/virtio: add dma barrier stubs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These fix a recent ACPICA regression affecting control method execution at the table level and an earlier hibernation regression in the ACPI driver for Intel SoCs (LPSS) that was missed by a previous fix in this cycle. Specifics: - Fix a recent ACPICA regression introduced by a previous fix that caused control method execution at the table level to be mishandled by mistake (Erik Schmauss). - Fix a hibernation regression from the 4.15 cycle in the ACPI driver for Intel SoCs (LPSS) that caused the platform firmware to be confused during resume from hibernation by the driver's PM quirks which was fixed for system-wide suspend/resume (ACPI S3) earlier in this cycle, but that previous fix missed the hibernation (ACPI S4) case (Rafael Wysocki)" * tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: AML Parser: ignore control method status in module-level code ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation
-
- 31 7月, 2018 18 次提交
-
-
由 Srinivas Pandruvada 提交于
Dynamic boosting of HWP performance on IO wake showed significant improvement to IO workloads. This series was intended for Skylake Xeon platforms only and feature was enabled by default based on CPU model number. But some Xeon platforms reused the Skylake desktop CPU model number. This caused some undesirable side effects to some graphics workloads. Since they are heavily IO bound, the increase in CPU performance decreased the power available for GPU to do its computing and hence decrease in graphics benchmark performance. For example on a Skylake desktop, GpuTest benchmark showed average FPS reduction from 529 to 506. This change makes sure that HWP boost feature is only enabled for Skylake server platforms by using ACPI FADT preferred PM Profile. If some desktop users wants to get benefit of boost, they can still enable boost from intel_pstate sysfs attribute "hwp_dynamic_boost". Fixes: 41ab43c9 (cpufreq: intel_pstate: enable boost for Skylake Xeon) Link: https://bugs.freedesktop.org/show_bug.cgi?id=107410Reported-by: NEero Tamminen <eero.t.tamminen@intel.com> Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Acked-by: NMel Gorman <mgorman@techsingularity.net> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Merge a fix for hibernation regression in the ACPI driver for Intel SoCs (LPSS). * acpi-soc: ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Several smallish fixes, I don't think any of this requires another -rc but I'll leave that up to you: 1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric Dumazet. 2) Route leak in xfrm_lookup_route(), from Tommi Rantala. 3) Premature poll() returns in AF_XDP, from Björn Töpel. 4) devlink leak in netdevsim, from Jakub Kicinski. 5) Don't BUG_ON in fib_compute_spec_dst, the condition can legitimately happen. From Lorenzo Bianconi. 6) Fix some spectre v1 gadgets in generic socket code, from Jeremy Cline. 7) Don't allow user to bind to out of range multicast groups, from Dmitry Safonov with a follow-up by Dmitry Safonov. 8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) netlink: Don't shift with UB on nlk->ngroups net/ipv6: fix metrics leak xen-netfront: wait xenbus state change when load module manually can: ems_usb: Fix memory leak on ems_usb_disconnect() openvswitch: meter: Fix setting meter id for new entries netlink: Do not subscribe to non-existent groups NET: stmmac: align DMA stuff to largest cache line length tcp_bbr: fix bw probing to raise in-flight data for very small BDPs net: socket: Fix potential spectre v1 gadget in sock_is_registered net: socket: fix potential spectre v1 gadget in socketcall net: mdio-mux: bcm-iproc: fix wrong getter and setter pair ipv4: remove BUG_ON() from fib_compute_spec_dst enic: handle mtu change for vf properly net: lan78xx: fix rx handling before first packet is send nfp: flower: fix port metadata conversion bug bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog() bpf: fix bpf_skb_load_bytes_relative pkt length check perf build: Build error in libbpf missing initialization net: ena: Fix use of uninitialized DMA address bits field bpf: btf: Use exact btf value_size match in map_check_btf() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: "Some small __init annotation and build fixes from Stephen Rostedt and Thomas Petazzoni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: use asm-generic version of msi.h sparc: move MSI related definitions to where they are used sparc/time: Add missing __init to init_tick_ops()
-
由 Linus Torvalds 提交于
Anatoly reports another squashfs fuzzing issue, where the decompression parameters themselves are in a compressed block. This causes squashfs_read_data() to be called in order to read the decompression options before the decompression stream having been set up, making squashfs go sideways. Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Acked-by: NPhillip Lougher <phillip.lougher@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yi Wang 提交于
The variable 'context->module.name' may be null pointer when kmalloc return null, so it's better to check it before using to avoid null dereference. Another one more thing this patch does is using kstrdup instead of (kmalloc + strcpy), and signal a lost record via audit_log_lost. Cc: stable@vger.kernel.org # 4.11 Signed-off-by: NYi Wang <wang.yi59@zte.com.cn> Reviewed-by: NJiang Biao <jiang.biao2@zte.com.cn> Reviewed-by: NRichard Guy Briggs <rgb@redhat.com> Signed-off-by: NPaul Moore <paul@paul-moore.com>
-
由 Thomas Petazzoni 提交于
This is necessary to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with: In file included from drivers//ata/ahci.c:45:0: >> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*msi_finish)(msi_alloc_info_t *arg, int retval); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*set_desc)(msi_alloc_info_t *arg, ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int virq, int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn Signed-off-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Petazzoni 提交于
The definitions in arch/sparc/include/asm/msi.h are only used in arch/sparc/mm/srmmu.c, so it makes sense to have them in the C file directly. In addition, having a custom arch/sparc/include/asm/msi.h prevents from using the asm-generic version of this header, which is necessary to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Rostedt (VMware) 提交于
Code that was added to force gcc not to inline any function that isn't explicitly declared as inline uncovered that init_tick_ops() isn't marked as "__init". It is only called by __init functions and more importantly it too calls an __init function which would require it to be __init as well. Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.comReported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Safonov 提交于
On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d42 ("netlink: Do not subscribe to non-existent groups"). Reported-by: Nkernel test robot <rong.a.chen@intel.com> Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.18-20180730' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-07-30 this is a pull request of one patch for net/master. The patch by Anton Vasilyev and the Linux Driver Verification project fixes a memory leak in the ems_usb driver's disconnect function. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: - a build race fix - a Xen entry fix - a TSC_DEADLINE quirk future-proofing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix if_changed build flip/flop bug x86/entry/64: Remove %ebx handling from error_entry/exit x86/apic: Future-proof the TSC_DEADLINE quirk for SKX
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixes: - a deadline scheduler related bug fix which triggered a kernel warning - an RT_RUNTIME_SHARE fix - a stop_machine preemption fix - a potential NULL dereference fix in sched_domain_debug_one()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE sched/deadline: Update rq_clock of later_rq when pushing a task stop_machine: Disable preemption after queueing stopper threads sched/topology: Check variable group before dereferencing it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc fixes: - AMD IBS data corruptor fix (uncovered by UBSAN) - an Intel PEBS entry unwind error fix - a HW-tracing crash fix - a MAINTAINERS update" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix crash when using HW tracing kernel filters perf/x86/intel: Fix unwind errors from PEBS entries (mk-II) MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer perf/x86/amd/ibs: Don't access non-started event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code i2c/mux, locking/core: Annotate the nested rt_mutex usage locking/rtmutex: Allow specifying a subclass for nested locking
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI fix from Ingo Molnar: "An UEFI variables fix for SEV guests" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Access EFI MMIO data as unencrypted when SEV is active
-
由 Sabrina Dubroca 提交于
Since commit d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from() assigns the rt->from pointer and increases the refcount on from's metrics. This reference is never released. Introduce the fib6_metrics_release() helper and use it to release the metrics. Fixes: d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xiao Liang 提交于
When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: NXiao Liang <xiliang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 7月, 2018 8 次提交
-
-
由 Jiang Biao 提交于
Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e2250429 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: NJiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: NHuang Chong <huang.chong@zte.com.cn> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Vincent Whitchurch 提交于
When building the kernel as Thumb-2 with binutils 2.29 or newer, if the assembler has seen the .type directive (via ENDPROC()) for a symbol, it automatically handles the setting of the lowest bit when the symbol is used with ADR. The badr macro on the other hand handles this lowest bit manually. This leads to a jump to a wrong address in the wrong state in the syscall return path: Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2 Modules linked in: CPU: 0 PID: 652 Comm: modprobe Tainted: G D 4.18.0-rc3+ #8 PC is at ret_fast_syscall+0x4/0x62 LR is at sys_brk+0x109/0x128 pc : [<80101004>] lr : [<801c8a35>] psr: 60000013 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 50c5387d Table: 9e82006a DAC: 00000051 Process modprobe (pid: 652, stack limit = 0x(ptrval)) 80101000 <ret_fast_syscall>: 80101000: b672 cpsid i 80101002: f8d9 2008 ldr.w r2, [r9, #8] 80101006: f1b2 4ffe cmp.w r2, #2130706432 ; 0x7f000000 80101184 <local_restart>: 80101184: f8d9 a000 ldr.w sl, [r9] 80101188: e92d 0030 stmdb sp!, {r4, r5} 8010118c: f01a 0ff0 tst.w sl, #240 ; 0xf0 80101190: d117 bne.n 801011c2 <__sys_trace> 80101192: 46ba mov sl, r7 80101194: f5ba 7fc8 cmp.w sl, #400 ; 0x190 80101198: bf28 it cs 8010119a: f04f 0a00 movcs.w sl, #0 8010119e: f3af 8014 nop.w {20} 801011a2: f2af 1ea2 subw lr, pc, #418 ; 0x1a2 To fix this, add a new symbol name which doesn't have ENDPROC used on it and use that with badr. We can't remove the badr usage since that would would cause breakage with older binutils. Signed-off-by: NVincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Anton Vasilyev 提交于
ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAnton Vasilyev <vasilyev@ispras.ru> Cc: <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Linus Torvalds 提交于
-
由 Justin Pettit 提交于
The meter code would create an entry for each new meter. However, it would not set the meter id in the new entry, so every meter would appear to have a meter id of zero. This commit properly sets the meter id when adding the entry. Fixes: 96fbc13d ("openvswitch: Add meter infrastructure") Signed-off-by: NJustin Pettit <jpettit@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression introduced in 4.18-rc4. Sorry for the late-breaking pull. I was originally going to wait for the next merge window, but Eric Whitney found a regression introduced in 4.18-rc4, so I decided to push out the regression plus the other fixes now. (The other commits have been baking in linux-next since early July)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix check to prevent initializing reserved inodes ext4: check for allocation block validity with block group locked ext4: fix inline data updates with checksums enabled ext4: clear mmp sequence number when remounting read-only ext4: fix false negatives *and* false positives in ext4_check_descriptors()
-
由 Dmitry Safonov 提交于
Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-