Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
12 个月 前同步成功

通知 152
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 12 4月, 2018 20 次提交
    • A
      proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps · d1be35cb
      由 Andrei Vagin 提交于 
      seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a
specified minimal field width.

It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it
works much faster.

== test_smaps.py
  num = 0
  with open("/proc/1/smaps") as f:
          for x in xrange(10000):
                  data = f.read()
                  f.seek(0, 0)
==

== Before patch ==
  $ time python test_smaps.py
  real    0m4.593s
  user    0m0.398s
  sys     0m4.158s

== After patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

$ perf -g record python test_smaps.py
== Before patch ==
-   79.01%     3.36%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 75.65% show_smap.isra.33
      + 48.85% seq_printf
      + 15.75% __walk_page_range
      + 9.70% show_map_vma.isra.23
        0.61% seq_puts

== After patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_w
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

[akpm@linux-foundation.org: fix drivers/of/unittest.c build]
Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d1be35cb
    • A
      procfs: add seq_put_hex_ll to speed up /proc/pid/maps · 0e3dc019
      由 Andrei Vagin 提交于 
      seq_put_hex_ll() prints a number in hexadecimal notation and works
faster than seq_printf().

== test.py
  num = 0
  with open("/proc/1/maps") as f:
          while num < 10000 :
                  data = f.read()
                  f.seek(0, 0)
                 num = num + 1
==

== Before patch ==
  $  time python test.py

  real	0m1.561s
  user	0m0.257s
  sys	0m1.302s

== After patch ==
  $ time python test.py

  real	0m0.986s
  user	0m0.279s
  sys	0m0.707s

$ perf -g record python test.py:

== Before patch ==
-   67.42%     2.82%  python   [kernel.kallsyms] [k] show_map_vma.isra.22
   - 64.60% show_map_vma.isra.22
      - 44.98% seq_printf
         - seq_vprintf
            - vsnprintf
               + 14.85% number
               + 12.22% format_decode
                 5.56% memcpy_erms
      + 15.06% seq_path
      + 4.42% seq_pad
   + 2.45% __GI___libc_read

== After patch ==
-   47.35%     3.38%  python   [kernel.kallsyms] [k] show_map_vma.isra.23
   - 43.97% show_map_vma.isra.23
      + 20.84% seq_path
      - 15.73% show_vma_header_prefix
           10.55% seq_put_hex_ll
         + 2.65% seq_put_decimal_ull
           0.95% seq_putc
      + 6.96% seq_pad
   + 2.94% __GI___libc_read

[avagin@openvz.org: use unsigned int instead of int where it is suitable]
  Link: http://lkml.kernel.org/r/20180214025619.4005-1-avagin@openvz.org
[avagin@openvz.org: v2]
  Link: http://lkml.kernel.org/r/20180117082050.25406-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20180112185812.7710-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0e3dc019
    • J
      mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE · bad8c6c0
      由 Joonsoo Kim 提交于 
      Patch series "mm/cma: manage the memory of the CMA area by using the
ZONE_MOVABLE", v2.

0. History

This patchset is the follow-up of the discussion about the "Introduce
ZONE_CMA (v7)" [1].  Please reference it if more information is needed.

1. What does this patch do?

This patch changes the management way for the memory of the CMA area in
the MM subsystem.  Currently the memory of the CMA area is managed by
the zone where their pfn is belong to.  However, this approach has some
problems since MM subsystem doesn't have enough logic to handle the
situation that different characteristic memories are in a single zone.
To solve this issue, this patch try to manage all the memory of the CMA
area by using the MOVABLE zone.  In MM subsystem's point of view,
characteristic of the memory on the MOVABLE zone and the memory of the
CMA area are the same.  So, managing the memory of the CMA area by using
the MOVABLE zone will not have any problem.

2. Motivation

There are some problems with current approach.  See following.  Although
these problem would not be inherent and it could be fixed without this
conception change, it requires many hooks addition in various code path
and it would be intrusive to core MM and would be really error-prone.
Therefore, I try to solve them with this new approach.  Anyway,
following is the problems of the current implementation.

o CMA memory utilization

First, following is the freepage calculation logic in MM.

 - For movable allocation: freepage = total freepage
 - For unmovable allocation: freepage = total freepage - CMA freepage

Freepages on the CMA area is used after the normal freepages in the zone
where the memory of the CMA area is belong to are exhausted.  At that
moment that the number of the normal freepages is zero, so

 - For movable allocation: freepage = total freepage = CMA freepage
 - For unmovable allocation: freepage = 0

If unmovable allocation comes at this moment, allocation request would
fail to pass the watermark check and reclaim is started.  After reclaim,
there would exist the normal freepages so freepages on the CMA areas
would not be used.

FYI, there is another attempt [2] trying to solve this problem in lkml.
And, as far as I know, Qualcomm also has out-of-tree solution for this
problem.

Useless reclaim:

There is no logic to distinguish CMA pages in the reclaim path.  Hence,
CMA page is reclaimed even if the system just needs the page that can be
usable for the kernel allocation.

Atomic allocation failure:

This is also related to the fallback allocation policy for the memory of
the CMA area.  Consider the situation that the number of the normal
freepages is *zero* since the bunch of the movable allocation requests
come.  Kswapd would not be woken up due to following freepage
calculation logic.

- For movable allocation: freepage = total freepage = CMA freepage

If atomic unmovable allocation request comes at this moment, it would
fails due to following logic.

- For unmovable allocation: freepage = total freepage - CMA freepage = 0

It was reported by Aneesh [3].

Useless compaction:

Usual high-order allocation request is unmovable allocation request and
it cannot be served from the memory of the CMA area.  In compaction,
migration scanner try to migrate the page in the CMA area and make
high-order page there.  As mentioned above, it cannot be usable for the
unmovable allocation request so it's just waste.

3. Current approach and new approach

Current approach is that the memory of the CMA area is managed by the
zone where their pfn is belong to.  However, these memory should be
distinguishable since they have a strong limitation.  So, they are
marked as MIGRATE_CMA in pageblock flag and handled specially.  However,
as mentioned in section 2, the MM subsystem doesn't have enough logic to
deal with this special pageblock so many problems raised.

New approach is that the memory of the CMA area is managed by the
MOVABLE zone.  MM already have enough logic to deal with special zone
like as HIGHMEM and MOVABLE zone.  So, managing the memory of the CMA
area by the MOVABLE zone just naturally work well because constraints
for the memory of the CMA area that the memory should always be
migratable is the same with the constraint for the MOVABLE zone.

There is one side-effect for the usability of the memory of the CMA
area.  The use of MOVABLE zone is only allowed for a request with
GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also
only allowed for this gfp flag.  Before this patchset, a request with
GFP_MOVABLE can use them.  IMO, It would not be a big issue since most
of GFP_MOVABLE request also has GFP_HIGHMEM flag.  For example, file
cache page and anonymous page.  However, file cache page for blockdev
file is an exception.  Request for it has no GFP_HIGHMEM flag.  There is
pros and cons on this exception.  In my experience, blockdev file cache
pages are one of the top reason that causes cma_alloc() to fail
temporarily.  So, we can get more guarantee of cma_alloc() success by
discarding this case.

Note that there is no change in admin POV since this patchset is just
for internal implementation change in MM subsystem.  Just one minor
difference for admin is that the memory stat for CMA area will be
printed in the MOVABLE zone.  That's all.

4. Result

Following is the experimental result related to utilization problem.

8 CPUs, 1024 MB, VIRTUAL MACHINE
make -j16

<Before>
  CMA area:               0 MB            512 MB
  Elapsed-time:           92.4		186.5
  pswpin:                 82		18647
  pswpout:                160		69839

<After>
  CMA        :            0 MB            512 MB
  Elapsed-time:           93.1		93.4
  pswpin:                 84		46
  pswpout:                183		92

akpm: "kernel test robot" reported a 26% improvement in
vm-scalability.throughput:
http://lkml.kernel.org/r/20180330012721.GA3845@yexl-desktop

[1]: lkml.kernel.org/r/1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com
[2]: https://lkml.org/lkml/2014/10/15/623
[3]: http://www.spinics.net/lists/linux-mm/msg100562.html

Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bad8c6c0
    • J
      mm/page_alloc: don't reserve ZONE_HIGHMEM for ZONE_MOVABLE request · d3cda233
      由 Joonsoo Kim 提交于 
      Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that
important to reserve.  When ZONE_MOVABLE is used, this problem would
theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE
allocation request which is mainly used for page cache and anon page
allocation.  So, fix it by setting 0 to
sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM].

And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size
makes code complex.  For example, if there is highmem system, following
reserve ratio is activated for *NORMAL ZONE* which would be easyily
misleading people.

 #ifdef CONFIG_HIGHMEM
 32
 #endif

This patch also fixes this situation by defining
sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to
right place.

Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Tested-by: NTony Lindgren <tony@atomide.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d3cda233
    • M
      mm: unclutter THP migration · 94723aaf
      由 Michal Hocko 提交于 
      THP migration is hacked into the generic migration with rather
surprising semantic.  The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate.  unmap_and_move then
fixes that up by spliting the THP into small pages while moving the head
page to the newly allocated order-0 page.  Remaning pages are moved to
the LRU list by split_huge_page.  The same happens if the THP allocation
fails.  This is really ugly and error prone [1].

I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated.  Some callers will just work
around that by retrying (e.g.  memory hotplug).  There are other pfn
walkers which are simply broken though.  e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior.  Page compaction doesn't try to migrate large
pages so it should be immune.

This patch tries to unclutter the situation by moving the special THP
handling up to the migrate_pages layer where it actually belongs.  We
simply split the THP page into the existing list if unmap_and_move fails
with ENOMEM and retry.  So we will _always_ migrate all THP subpages and
specific migrate_pages users do not have to deal with this case in a
special way.

[1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com

Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NZi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      94723aaf
    • M
      mm, migrate: remove reason argument from new_page_t · 666feb21
      由 Michal Hocko 提交于 
      No allocation callback is using this argument anymore.  new_page_node
used to use this parameter to convey node_id resp.  migration error up
to move_pages code (do_move_page_to_node_array).  The error status never
made it into the final status field and we have a better way to
communicate node id to the status field now.  All other allocation
callbacks simply ignored the argument so we can drop it finally.

[mhocko@suse.com: fix migration callback]
  Link: http://lkml.kernel.org/r/20180105085259.GH2801@dhcp22.suse.cz
[akpm@linux-foundation.org: fix alloc_misplaced_dst_page()]
[mhocko@kernel.org: fix build]
  Link: http://lkml.kernel.org/r/20180103091134.GB11319@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180103082555.14592-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NZi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      666feb21
    • J
      mm: memcg: make sure memory.events is uptodate when waking pollers · e27be240
      由 Johannes Weiner 提交于 
      Commit a983b5eb ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.

For memory.stat this is acceptable.  But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.

Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.

This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters.  That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.

[hannes@cmpxchg.org: "array subscript is above array bounds"]
  Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5eb ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NTejun Heo <tj@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e27be240
    • A
      mm/hmm: fix header file if/else/endif maze, again · 9d8a463a
      由 Arnd Bergmann 提交于 
      The last fix was still wrong, as we need the inline dummy functions also
for the case that CONFIG_HMM is enabled but CONFIG_HMM_MIRROR is not:

  kernel/fork.o: In function `__mmdrop':
  fork.c:(.text+0x14f6): undefined reference to `hmm_mm_destroy'

This adds back the second copy of the dummy functions, hopefully
this time in the right place.

Link: http://lkml.kernel.org/r/20180404110236.804484-1-arnd@arndb.de
Fixes: 8900d06a277a ("mm/hmm: fix header file if/else/endif maze")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9d8a463a
    • J
      mm/hmm: use device driver encoding for HMM pfn · f88a1e90
      由 Jérôme Glisse 提交于 
      Users of hmm_vma_fault() and hmm_vma_get_pfns() provide a flags array and
pfn shift value allowing them to define their own encoding for HMM pfn
that are fill inside the pfns array of the hmm_range struct.  With this
device driver can get pfn that match their own private encoding out of HMM
without having to do any conversion.

[rcampbell@nvidia.com: don't ignore specific pte fault flag in hmm_vma_fault()]
  Link: http://lkml.kernel.org/r/20180326213009.2460-2-jglisse@redhat.com
[rcampbell@nvidia.com: clarify fault logic for device private memory]
  Link: http://lkml.kernel.org/r/20180326213009.2460-3-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20180323005527.758-16-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NRalph Campbell <rcampbell@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f88a1e90
    • J
      mm/hmm: change hmm_vma_fault() to allow write fault on page basis · 2aee09d8
      由 Jérôme Glisse 提交于 
      This changes hmm_vma_fault() to not take a global write fault flag for a
range but instead rely on caller to populate HMM pfns array with proper
fault flag ie HMM_PFN_VALID if driver want read fault for that address or
HMM_PFN_VALID and HMM_PFN_WRITE for write.

Moreover by setting HMM_PFN_DEVICE_PRIVATE the device driver can ask for
device private memory to be migrated back to system memory through page
fault.

This is more flexible API and it better reflects how device handles and
reports fault.

Link: http://lkml.kernel.org/r/20180323005527.758-15-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2aee09d8
    • J
      mm/hmm: rename HMM_PFN_DEVICE_UNADDRESSABLE to HMM_PFN_DEVICE_PRIVATE · b2744118
      由 Jérôme Glisse 提交于 
      Make naming consistent across code, DEVICE_PRIVATE is the name use outside
HMM code so use that one.

Link: http://lkml.kernel.org/r/20180323005527.758-12-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b2744118
    • J
      mm/hmm: do not differentiate between empty entry or missing directory · 5504ed29
      由 Jérôme Glisse 提交于 
      There is no point in differentiating between a range for which there is
not even a directory (and thus entries) and empty entry (pte_none() or
pmd_none() returns true).

Simply drop the distinction ie remove HMM_PFN_EMPTY flag and merge now
duplicate hmm_vma_walk_hole() and hmm_vma_walk_clear() functions.

Link: http://lkml.kernel.org/r/20180323005527.758-11-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5504ed29
    • J
      mm/hmm: use uint64_t for HMM pfn instead of defining hmm_pfn_t to ulong · ff05c0c6
      由 Jérôme Glisse 提交于 
      All device driver we care about are using 64bits page table entry.  In
order to match this and to avoid useless define convert all HMM pfn to
directly use uint64_t.  It is a first step on the road to allow driver to
directly use pfn value return by HMM (saving memory and CPU cycles use for
conversion between the two).

Link: http://lkml.kernel.org/r/20180323005527.758-9-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ff05c0c6
    • J
      mm/hmm: remove HMM_PFN_READ flag and ignore peculiar architecture · 86586a41
      由 Jérôme Glisse 提交于 
      Only peculiar architecture allow write without read thus assume that any
valid pfn do allow for read.  Note we do not care for write only because
it does make sense with thing like atomic compare and exchange or any
other operations that allow you to get the memory value through them.

Link: http://lkml.kernel.org/r/20180323005527.758-8-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      86586a41
    • J
      mm/hmm: use struct for hmm_vma_fault(), hmm_vma_get_pfns() parameters · 08232a45
      由 Jérôme Glisse 提交于 
      Both hmm_vma_fault() and hmm_vma_get_pfns() were taking a hmm_range struct
as parameter and were initializing that struct with others of their
parameters.  Have caller of those function do this as they are likely to
already do and only pass this struct to both function this shorten
function signature and make it easier in the future to add new parameters
by simply adding them to the structure.

Link: http://lkml.kernel.org/r/20180323005527.758-7-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      08232a45
    • R
      mm/hmm: HMM should have a callback before MM is destroyed · e1401513
      由 Ralph Campbell 提交于 
      hmm_mirror_register() registers a callback for when the CPU pagetable is
modified.  Normally, the device driver will call hmm_mirror_unregister()
when the process using the device is finished.  However, if the process
exits uncleanly, the struct_mm can be destroyed with no warning to the
device driver.

Link: http://lkml.kernel.org/r/20180323005527.758-4-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e1401513
    • J
      mm/hmm: fix header file if/else/endif maze · b28b08de
      由 Jérôme Glisse 提交于 
      The #if/#else/#endif for IS_ENABLED(CONFIG_HMM) were wrong.  Because of
this after multiple include there was multiple definition of both
hmm_mm_init() and hmm_mm_destroy() leading to build failure if HMM was
enabled (CONFIG_HMM set).

Link: http://lkml.kernel.org/r/20180323005527.758-3-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b28b08de
    • S
      mm, vmscan, tracing: use pointer to reclaim_stat struct in trace event · d51d1e64
      由 Steven Rostedt 提交于 
      The trace event trace_mm_vmscan_lru_shrink_inactive() currently has 12
parameters! Seven of them are from the reclaim_stat structure.  This
structure is currently local to mm/vmscan.c.  By moving it to the global
vmstat.h header, we can also reference it from the vmscan tracepoints.
In moving it, it brings down the overhead of passing so many arguments
to the trace event.  In the future, we may limit the number of arguments
that a trace event may pass (ideally just 6, but more realistically it
may be 8).

Before this patch, the code to call the trace event is this:

 0f 83 aa fe ff ff       jae    ffffffff811e6261 <shrink_inactive_list+0x1e1>
 48 8b 45 a0             mov    -0x60(%rbp),%rax
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 44 8b 6d d4             mov    -0x2c(%rbp),%r13d
 8b 4d d0                mov    -0x30(%rbp),%ecx
 44 8b 75 cc             mov    -0x34(%rbp),%r14d
 44 8b 7d c8             mov    -0x38(%rbp),%r15d
 48 89 45 90             mov    %rax,-0x70(%rbp)
 8b 83 b8 fe ff ff       mov    -0x148(%rbx),%eax
 8b 55 c0                mov    -0x40(%rbp),%edx
 8b 7d c4                mov    -0x3c(%rbp),%edi
 8b 75 b8                mov    -0x48(%rbp),%esi
 89 45 80                mov    %eax,-0x80(%rbp)
 65 ff 05 e4 f7 e2 7e    incl   %gs:0x7ee2f7e4(%rip)        # 15bd0 <__preempt_count>
 48 8b 05 75 5b 13 01    mov    0x1135b75(%rip),%rax        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 48 85 c0                test   %rax,%rax
 74 72                   je     ffffffff811e646a <shrink_inactive_list+0x3ea>
 48 89 c3                mov    %rax,%rbx
 4c 8b 10                mov    (%rax),%r10
 89 f8                   mov    %edi,%eax
 48 89 85 68 ff ff ff    mov    %rax,-0x98(%rbp)
 89 f0                   mov    %esi,%eax
 48 89 85 60 ff ff ff    mov    %rax,-0xa0(%rbp)
 89 c8                   mov    %ecx,%eax
 48 89 85 78 ff ff ff    mov    %rax,-0x88(%rbp)
 89 d0                   mov    %edx,%eax
 48 89 85 70 ff ff ff    mov    %rax,-0x90(%rbp)
 8b 45 8c                mov    -0x74(%rbp),%eax
 48 8b 7b 08             mov    0x8(%rbx),%rdi
 48 83 c3 18             add    $0x18,%rbx
 50                      push   %rax
 41 54                   push   %r12
 41 55                   push   %r13
 ff b5 78 ff ff ff       pushq  -0x88(%rbp)
 41 56                   push   %r14
 41 57                   push   %r15
 ff b5 70 ff ff ff       pushq  -0x90(%rbp)
 4c 8b 8d 68 ff ff ff    mov    -0x98(%rbp),%r9
 4c 8b 85 60 ff ff ff    mov    -0xa0(%rbp),%r8
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 48 8b 55 90             mov    -0x70(%rbp),%rdx
 8b 75 80                mov    -0x80(%rbp),%esi
 41 ff d2                callq  *%r10

After the patch:

 0f 83 a8 fe ff ff       jae    ffffffff811e626d <shrink_inactive_list+0x1cd>
 8b 9b b8 fe ff ff       mov    -0x148(%rbx),%ebx
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 4c 8b 6d a0             mov    -0x60(%rbp),%r13
 65 ff 05 f5 f7 e2 7e    incl   %gs:0x7ee2f7f5(%rip)        # 15bd0 <__preempt_count>
 4c 8b 35 86 5b 13 01    mov    0x1135b86(%rip),%r14        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 4d 85 f6                test   %r14,%r14
 74 2a                   je     ffffffff811e6411 <shrink_inactive_list+0x371>
 49 8b 06                mov    (%r14),%rax
 8b 4d 8c                mov    -0x74(%rbp),%ecx
 49 8b 7e 08             mov    0x8(%r14),%rdi
 49 83 c6 18             add    $0x18,%r14
 4c 89 ea                mov    %r13,%rdx
 45 89 e1                mov    %r12d,%r9d
 4c 8d 45 b8             lea    -0x48(%rbp),%r8
 89 de                   mov    %ebx,%esi
 51                      push   %rcx
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 ff d0                   callq  *%rax

Link: http://lkml.kernel.org/r/2559d7cb-ec60-1200-2362-04fa34fd02bb@fb.com
Link: http://lkml.kernel.org/r/20180322121003.4177af15@gandalf.local.homeSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d51d1e64
    • A
      mm/vmscan: don't mess with pgdat->flags in memcg reclaim · e3c1ac58
      由 Andrey Ryabinin 提交于 
      memcg reclaim may alter pgdat->flags based on the state of LRU lists in
cgroup and its children.  PGDAT_WRITEBACK may force kswapd to sleep
congested_wait(), PGDAT_DIRTY may force kswapd to writeback filesystem
pages.  But the worst here is PGDAT_CONGESTED, since it may force all
direct reclaims to stall in wait_iff_congested().  Note that only kswapd
have powers to clear any of these bits.  This might just never happen if
cgroup limits configured that way.  So all direct reclaims will stall as
long as we have some congested bdi in the system.

Leave all pgdat->flags manipulations to kswapd.  kswapd scans the whole
pgdat, only kswapd can clear pgdat->flags once node is balanced, thus
it's reasonable to leave all decisions about node state to kswapd.

Why only kswapd? Why not allow to global direct reclaim change these
flags? It is because currently only kswapd can clear these flags.  I'm
less worried about the case when PGDAT_CONGESTED falsely not set, and
more worried about the case when it falsely set.  If direct reclaimer
sets PGDAT_CONGESTED, do we have guarantee that after the congestion
problem is sorted out, kswapd will be woken up and clear the flag? It
seems like there is no such guarantee.  E.g.  direct reclaimers may
eventually balance pgdat and kswapd simply won't wake up (see
wakeup_kswapd()).

Moving pgdat->flags manipulation to kswapd, means that cgroup2 recalim
now loses its congestion throttling mechanism.  Add per-cgroup
congestion state and throttle cgroup2 reclaimers if memcg is in
congestion state.

Currently there is no need in per-cgroup PGDAT_WRITEBACK and PGDAT_DIRTY
bits since they alter only kswapd behavior.

The problem could be easily demonstrated by creating heavy congestion in
one cgroup:

    echo "+memory" > /sys/fs/cgroup/cgroup.subtree_control
    mkdir -p /sys/fs/cgroup/congester
    echo 512M > /sys/fs/cgroup/congester/memory.max
    echo $$ > /sys/fs/cgroup/congester/cgroup.procs
    /* generate a lot of diry data on slow HDD */
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
    ....
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &

and some job in another cgroup:

    mkdir /sys/fs/cgroup/victim
    echo 128M > /sys/fs/cgroup/victim/memory.max

    # time cat /dev/sda > /dev/null
    real    10m15.054s
    user    0m0.487s
    sys     1m8.505s

According to the tracepoint in wait_iff_congested(), the 'cat' spent 50%
of the time sleeping there.

With the patch, cat don't waste time anymore:

    # time cat /dev/sda > /dev/null
    real    5m32.911s
    user    0m0.411s
    sys     0m56.664s

[aryabinin@virtuozzo.com: congestion state should be per-node]
  Link: http://lkml.kernel.org/r/20180406135215.10057-1-aryabinin@virtuozzo.com
[ayabinin@virtuozzo.com: make congestion state per-cgroup-per-node instead of just per-cgroup[
  Link: http://lkml.kernel.org/r/20180406180254.8970-2-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-5-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e3c1ac58
    • R
      mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES · eb592546
      由 Roman Gushchin 提交于 
      Patch series "indirectly reclaimable memory", v2.

This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.

This patch (of 3):

Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.

Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e.  will
be released under memory pressure.

The counter is in bytes, as it's not always possible to count such
objects in pages.  The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.

Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eb592546
  3. 10 4月, 2018 1 次提交
    • L
      Fix subtle macro variable shadowing in min_not_zero() · e9092d0d
      由 Linus Torvalds 提交于 
      Commit 3c8ba0d6 ("kernel.h: Retain constant expression output for
max()/min()") rewrote our min/max macros to be very clever, but in the
meantime resurrected a variable name shadow issue that we had had
previously fixed in commit 589a9785 ("min/max: remove sparse
warnings when they're nested").

That commit talks about the sparse warnings that this shadowing causes,
which we ignored as just a minor annoyance.  But it turns out that the
sparse warning is the least of our problems.  We actually have a real
bug due to the shadowing through the interaction with "min_not_zero()",
which ends up doing

   min(__x, __y)

internally, and then the new declaration of "__x" and "__y" as new
variables in __cmp_once() results in a complete mess of an expression,
and "min_not_zero()" doesn't work at all.

For some odd reason, this only ever caused (reported) problems on s390,
even though it is a generic issue and most of the (obviously successful)
testing of the problematic commit had happened on other architectures.

Quoting Sebastian Ott:
 "What happened is that the bio build by the partition detection code
  was attempted to be split by the block layer because the block queue
  had a max_sector setting of 0. blk_queue_max_hw_sectors uses
  min_not_zero."

So re-introduce the use of __UNIQUE_ID() to make sure that the min/max
macros do not have these kinds of clashes.

[ That said, __UNIQUE_ID() itself has several issues that make it less
  than wonderful.

  In particular, the "uniqueness" has a fallback on the line number,
  which means that it's not actually unique in more complex cases if you
  don't build with gcc or clang (which have working unique counters that
  aren't tied to line numbers).

  That historical broken fallback also means that we have that pointless
  "prefix" argument that doesn't actually make much sense _except_ for
  the known-broken case. Oh well. ]

Fixes: 3c8ba0d6 ("kernel.h: Retain constant expression output for max()/min()")
Reported-and-tested-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e9092d0d
  5. 07 4月, 2018 1 次提交
  7. 06 4月, 2018 18 次提交