- 22 8月, 2013 17 次提交
-
-
由 Trond Myklebust 提交于
Set up basic tracepoints for debugging NFSv4 file lock/unlock Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Set up basic tracepoints for debugging NFSv4 file open/close Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Set up basic tracepoints for debugging client id creation/destruction and session creation/destruction. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add tracepoints for mknod, mkdir, rmdir, remove (unlink) and symlink. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add tracepoints for lookup, lookup_revalidate and atomic_open Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When doing an open of a directory, ensure that we do pass the lookup flags from nfs_atomic_open into nfs_lookup. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add tracepoints for inode attribute updates, attribute revalidation, writeback start/end fsync start/end, attribute change start/end, permission check start/end. The intention is to enable performance tracing using 'perf'as well as improving debugging. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to be able to display the crc32 hash of the filehandle in tracepoints. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Optimise for the case where we only do one lookup. Clean up the code so it is obvious that silly[] is not a dynamic array. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We always encode to __be32 format in XDR: silences a sparse warning. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Bryan Schumaker <bjschuma@netapp.com>
-
由 Trond Myklebust 提交于
Technically, we don't really need to convert these time stamps, since they are actually cookies. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <Chuck.Lever@oracle.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 8月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
Ever since commit 6168f62c (Add ACCESS operation to OPEN compound) the NFSv4 atomic open has primed the access cache, and so nfs_permission will no longer do an RPC call on the wire. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 8月, 2013 8 次提交
-
-
由 Andy Adamson 提交于
As per RFC 5661 Security Considerations Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible" uses the nfs_client cl_rpcclient for all clientid management operations. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
As per RFC 3530 and RFC 5661 Security Considerations Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible" uses the nfs_client cl_rpcclient for all clientid management operations. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Increase NFS4_DEF_SLOT_TABLE_SIZE which is used as the client ca_maxreequests value in CREATE_SESSION. Current non-dynamic session slot server implementations use the client ca_maxrequests as a maximum slot number: 64 session slots can handle most workloads. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Never try to use a non-UID 0 user credential for lease management, as that credential can change out from under us. The server will block NFSv4 lease recovery with NFS4ERR_CLID_INUSE. Since the mechanism to acquire a credential for lease management is now the same for all minor versions, replace the minor version- specific callout with a single function. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Commit 05f4c350 "NFS: Discover NFSv4 server trunking when mounting" Fri Sep 14 17:24:32 2012 introduced Uniform Client String support, which forces our NFS client to establish a client ID immediately during a mount operation rather than waiting until a user wants to open a file. Normally machine credentials (eg. from a keytab) are used to perform a mount operation that is protected by Kerberos. Before 05fc350, SETCLIENTID used a machine credential, or fell back to a regular user's credential if no keytab is available. On clients that don't have a keytab, performing SETCLIENTID early means there's no user credential to fall back on, since no regular user has kinit'd yet. 05f4c350 seems to have broken the ability to mount with sec=krb5 on clients that don't have a keytab in kernels 3.7 - 3.10. To address this regression, commit 4edaa308 (NFS: Use "krb5i" to establish NFSv4 state whenever possible), Sat Mar 16 15:56:20 2013, was merged in 3.10. This commit forces the NFS client to fall back to AUTH_SYS for lease management operations if no keytab is available. Neil Brown noticed that, since root is required to kinit to do a sec=krb5 mount when a client doesn't have a keytab, we can try to use root's Kerberos credential before AUTH_SYS. Now, when determining a principal and flavor to use for lease management, the NFS client tries in this order: 1. Flavor: AUTH_GSS, krb5i Principal: service principal (via keytab) 2. Flavor: AUTH_GSS, krb5i Principal: user principal established for UID 0 (via kinit) 3. Flavor: AUTH_SYS Principal: UID 0 / GID 0 Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
RFC3530 disallows the use of udp as a transport protocol for NFSv4. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Currently, you can open a NFSv4 file with O_APPEND|O_DIRECT, but cannot fcntl(F_SETFL,...) with those flags. This flag combination is explicitly forbidden on NFSv3 opens, and it seems like it should also be on NFSv4. Reported-by: NChao Ye <cye@redhat.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 7月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
Commit 6f2ea7f2 (NFS: Add nfs4_unique_id boot parameter) introduces a boot parameter that allows client administrators to set a string identifier for use by the EXCHANGE_ID and SETCLIENTID arguments in order to make them more globally unique. Unfortunately, that uniquifier is no longer globally unique in the presence of net namespaces, since each container expects to be able to set up their own lease when mounting a new NFSv4/4.1 partition. The fix is to add back in the container-specific hostname in addition to the unique id. Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 7月, 2013 9 次提交
-
-
由 Andy Adamson 提交于
Should not use the clientid maintenance rpc_clnt. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: when NFSv4.1 support is compiled out, nfs4_end_drain_session() becomes a stub. Make the synopsis of the stub match the synopsis of the real version of the function. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
Now that Al has fixed simple_lookup to account for the case where sb->s_d_op is set, there's no need to keep our own special lookup op. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Nadav Shemer 提交于
nfs4_proc_setattr removes ATTR_OPEN from sattr->ia_valid, but later nfs4_do_setattr checks for it Signed-off-by: NNadav Shemer <nadav@tonian.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The attribute length is already calculated in advance. There is no reason why we cannot calculate the bitmap in advance too so that we don't have to play pointer games. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha architecture fixes from Matt Turner: "This contains mostly clean ups and fixes but also an implementation of atomic64_dec_if_positive() and a pair of new syscalls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use handle_percpu_irq for the timer interrupt alpha: Force the user-visible HZ to a constant 1024. alpha: Don't if-out dp264_device_interrupt. alpha: Use __builtin_alpha_rpcc alpha: Fix type compatibility warning for marvel_map_irq alpha: Generate dwarf2 unwind info for various kernel entry points. alpha: Implement atomic64_dec_if_positive alpha: Improve atomic_add_unless alpha: Modernize lib/mpi/longlong.h alpha: Add kcmp and finit_module syscalls alpha: locks: remove unused arch_*_relax operations alpha: kernel: typo issue, using '1' instead of '11' alpha: kernel: using memcpy() instead of strcpy() alpha: Convert print_symbol to %pSR
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull vhost fixes from Michael Tsirkin: "vhost: more fixes for 3.11 This includes some fixes for vhost net and scsi drivers. The test module has already been reworked to avoid rcu usage, but the necessary core changes are missing, we fixed this. Unlikely to affect any real-world users, but it's early in the cycle so, let's merge them" (It was earlier when Michael originally sent the email, but it somehot got missed in the flood, so here it is after -rc2) * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: Remove custom vhost rcu usage vhost-scsi: Always access vq->private_data under vq mutex vhost-net: Always access vq->private_data under vq mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse bugfixes from Miklos Szeredi: "These are bugfixes and a cleanup to the "readdirplus" feature" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: readdirplus: cleanup fuse: readdirplus: change attributes once fuse: readdirplus: fix instantiate fuse: readdirplus: sanity checks fuse: readdirplus: fix dentry leak
-
由 Trond Myklebust 提交于
The calculation of the attribute length was 4 bytes off. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NAndre Heider <a.heider@gmail.com> Reported-and-tested-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 7月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes and cleanups from Steven Rostedt: "This contains fixes, optimizations and some clean ups Some of the fixes need to go back to 3.10. They are minor, and deal mostly with incorrect ref counting in accessing event files. There was a couple of optimizations that should have perf perform a bit better when accessing trace events. And some various clean ups. Some of the clean ups are necessary to help in a fix to a theoretical race between opening a event file and deleting that event" * tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Kill the unbalanced tr->ref++ in tracing_buffers_open() tracing: Kill trace_array->waiter tracing: Do not (ab)use trace_seq in event_id_read() tracing: Simplify the iteration logic in f_start/f_next tracing: Add ref_data to function and fgraph tracer structs tracing: Miscellaneous fixes for trace_array ref counting tracing: Fix error handling to ensure instances can always be removed tracing/kprobe: Wait for disabling all running kprobe handlers tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare() tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty tracing/function: Avoid perf_trace_buf_*() if event_function.perf_events is empty tracing: Typo fix on ring buffer comments tracing: Use trace_seq_puts()/trace_seq_putc() where possible tracing: Use correct config guard CONFIG_STACK_TRACER
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management fixes from Zhang Rui: "These are fixes collected over the last week, they fixes several problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1. Specifics: - the x86_pkg_temp_thermal driver causes crash on systems with no package MSR support as there is a bug in the logic to check presence of DTHERM and PTS feature together. Added a change so that when there is no PTS support, module doesn't get loaded. - fix krealloc() misuse in pkg_temp_thermal_device_add(). If krealloc() returns NULL, it doesn't free the original. Thus if we want to exit because of the krealloc() failure, we must make sure the original one is freed. - The error code path of the x86 package temperature thermal driver's initialization routine makes an unbalanced call to get_online_cpus(), which causes subsequent CPU offline operations, and consequently system suspend, to permanently block in cpu_hotplug_begin() on systems where get_core_online() returns an error code. Remove the extra get_online_cpus() to fix the problem" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal: Fix lockup of cpu_down() Thermal: x86_pkg_temp: Limit number of pkg temp zones Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add() Thermal: x86 package temp thermal crash
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull gpio fixes from Linus Walleij: "A first round of GPIO fixes for the v3.11 series: - OMAP device tree boot fix - Handle an error condition in the MSM driver The OMAP patches have been around since around the merge window, but since they first caused more breakage I let them boil in -next for a while. These should be fine now" * tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers: gpio: msm: Fix the error condition for reading ngpio gpio/omap: fix build error when OF_GPIO is not defined. gpio/omap: auto request GPIO as input if used as IRQ via DT gpio/omap: don't create an IRQ mapping for every GPIO on DT
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block IO driver bits from Jens Axboe: "As I mentioned in the core block pull request, due to real life circumstances the driver pull request would be late. Now it looks like -rc2 late... On the plus side, apart form the rsxx update, these are all things that I could argue could go in later in the cycle as they are fixes and not features. So even though things are late, it's not ALL bad. The pull request contains: - Updates to bcache, all bug fixes, from Kent. - A pile of drbd bug fixes (no big features this time!). - xen blk front/back fixes. - rsxx driver updates, some of them deferred form 3.10. So should be well cooked by now" * 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits) bcache: Allocation kthread fixes bcache: Fix GC_SECTORS_USED() calculation bcache: Journal replay fix bcache: Shutdown fix bcache: Fix a sysfs splat on shutdown bcache: Advertise that flushes are supported bcache: check for allocation failures bcache: Fix a dumb race bcache: Use standard utility code bcache: Update email address bcache: Delete fuzz tester bcache: Document shrinker reserve better bcache: FUA fixes drbd: Allow online change of al-stripes and al-stripe-size drbd: Constants should be UPPERCASE drbd: Ignore the exit code of a fence-peer handler if it returns too late drbd: Fix rcu_read_lock balance on error path drbd: fix error return code in drbd_init() drbd: Do not sleep inside rcu bcache: Refresh usage docs ...
-