- 13 12月, 2011 1 次提交
-
-
由 Glauber Costa 提交于
This patch introduces memory pressure controls for the tcp protocol. It uses the generic socket memory pressure code introduced in earlier patches, and fills in the necessary data in cg_proto struct. Signed-off-by: NGlauber Costa <glommer@parallels.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2011 1 次提交
-
-
由 Pavel Emelyanov 提交于
Copy-s/tcp/udp/-paste from TCP bits. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2011 1 次提交
-
-
由 Vasiliy Kulikov 提交于
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages without any special privileges. In other words, the patch makes it possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In order not to increase the kernel's attack surface, the new functionality is disabled by default, but is enabled at bootup by supporting Linux distributions, optionally with restriction to a group or a group range (see below). Similar functionality is implemented in Mac OS X: http://www.manpagez.com/man/4/icmp/ A new ping socket is created with socket(PF_INET, SOCK_DGRAM, PROT_ICMP) Message identifiers (octets 4-5 of ICMP header) are interpreted as local ports. Addresses are stored in struct sockaddr_in. No port numbers are reserved for privileged processes, port 0 is reserved for API ("let the kernel pick a free number"). There is no notion of remote ports, remote port numbers provided by the user (e.g. in connect()) are ignored. Data sent and received include ICMP headers. This is deliberate to: 1) Avoid the need to transport headers values like sequence numbers by other means. 2) Make it easier to port existing programs using raw sockets. ICMP headers given to send() are checked and sanitized. The type must be ICMP_ECHO and the code must be zero (future extensions might relax this, see below). The id is set to the number (local port) of the socket, the checksum is always recomputed. ICMP reply packets received from the network are demultiplexed according to their id's, and are returned by recv() without any modifications. IP header information and ICMP errors of those packets may be obtained via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source quenches and redirects are reported as fake errors via the error queue (IP_RECVERR); the next hop address for redirects is saved to ee_info (in network order). socket(2) is restricted to the group range specified in "/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions to the single group (to either make /sbin/ping g+s and owned by this group or to grant permissions to the "netadmins" group), "0 4294967295" would enable it for the world, "100 4294967295" would enable it for the users, but not daemons. The existing code might be (in the unlikely case anyone needs it) extended rather easily to handle other similar pairs of ICMP messages (Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply etc.). Userspace ping util & patch for it: http://openwall.info/wiki/people/segoon/ping For Openwall GNU/*/Linux it was the last step on the road to the setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels) is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs: http://mirrors.kernel.org/openwall/Owl/current/iso/ Initially this functionality was written by Pavel Kankovsky for Linux 2.4.32, but unfortunately it was never made public. All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with the patch. PATCH v3: - switched to flowi4. - minor changes to be consistent with raw sockets code. PATCH v2: - changed ping_debug() to pr_debug(). - removed CONFIG_IP_PING. - removed ping_seq_fops.owner field (unused for procfs). - switched to proc_net_fops_create(). - switched to %pK in seq_printf(). PATCH v1: - fixed checksumming bug. - CAP_NET_RAW may not create icmp sockets anymore. RFC v2: - minor cleanups. - introduced sysctl'able group range to restrict socket(2). Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2011 1 次提交
-
-
由 David S. Miller 提交于
The time has finally come to remove the hash based routing table implementation in ipv4. FIB Trie is mature, well tested, and I've done an audit of it's code to confirm that it implements insert, delete, and lookup with the same identical semantics as fib_hash did. If there are any semantic differences found in fib_trie, we should simply fix them. I've placed the trie statistic config option under advanced router configuration. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NStephen Hemminger <shemminger@vyatta.com>
-
- 22 8月, 2010 1 次提交
-
-
由 Dmitry Kozlov 提交于
PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework NET: introduce the "gre" module for demultiplexing GRE packets on version criteria (required to pptp and ip_gre may coexists) NET: ip_gre: update to use the "gre" module This patch introduces then pptp support to the linux kernel which dramatically speeds up pptp vpn connections and decreases cpu usage in comparison of existing user-space implementation (poptop/pptpclient). There is accel-pptp project (https://sourceforge.net/projects/accel-pptp/) to utilize this module, it contains plugin for pppd to use pptp in client-mode and modified pptpd (poptop) to build high-performance pptp NAS. There was many changes from initial submitted patch, most important are: 1. using rcu instead of read-write locks 2. using static bitmap instead of dynamically allocated 3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages 4. fixed many coding style issues Thanks to Eric Dumazet. Signed-off-by: NDmitry Kozlov <xeb@mail.ru> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2008 1 次提交
-
-
由 Julius Volz 提交于
Since IPVS now has partial IPv6 support, this patch moves IPVS from net/ipv4/ipvs to net/netfilter/ipvs. It's a result of: $ git mv net/ipv4/ipvs net/netfilter and adapting the relevant Kconfigs/Makefiles to the new path. Signed-off-by: NJulius Volz <juliusv@google.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 07 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit db1ed684 ("[IPV6] UDP: Rename IPv6 UDP files."), commit 8be8af8f ("[IPV4] UDP: Move IPv4-specific bits to other file.") and commit e898d4db ("[UDP]: Allow users to configure UDP-Lite."). First, udplite is of such small cost, and it is a core protocol just like TCP and normal UDP are. We spent enormous amounts of effort to make udplite share as much code with core UDP as possible. All of that work is less valuable if we're just going to slap a config option on udplite support. It is also causing build failures, as reported on linux-next, showing that the changeset was not tested very well. In fact, this is the second build failure resulting from the udplite change. Finally, the config options provided was a bool, instead of a modular option. Meaning the udplite code does not even get build tested by allmodconfig builds, and furthermore the user is not presented with a reasonable modular build option which is particularly needed by distribution vendors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Move IPv4-specific UDP bits from net/ipv4/udp.c into (new) net/ipv4/udp_ipv4.c. Rename net/ipv4/udplite.c to net/ipv4/udplite_ipv4.c. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Let's give users an option for disabling UDP-Lite (~4K). old: | text data bss dec hex filename | 286498 12432 6072 305002 4a76a net/ipv4/built-in.o | 193830 8192 3204 205226 321aa net/ipv6/ipv6.o new (without UDP-Lite): | text data bss dec hex filename | 284086 12136 5432 301654 49a56 net/ipv4/built-in.o | 191835 7832 3076 202743 317f7 net/ipv6/ipv6.o Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 29 1月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
This includes several cleanups: * tune Makefile to compile out this file when SYSCTL=n. Now it looks like net/core/sysctl_net_core.c one; * move the ipv4_config to af_inet.c to exist all the time; * remove additional sysctl_ip_nonlocal_bind declaration (it is already declared in net/ip.h); * remove no nonger needed ifdefs from this file. This is a preparation for using ctl paths for net/ipv4/ sysctl table. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2007 1 次提交
-
-
由 Pavel Emelyanov 提交于
There are some objects that are common in all the places which are used to keep track of frag queues, they are: * hash table * LRU list * rw lock * rnd number for hash function * the number of queues * the amount of memory occupied by queues * secret timer Move all this stuff into one structure (struct inet_frags) to make it possible use them uniformly in the future. Like with the previous patch this mostly consists of hunks like - write_lock(&ipfrag_lock); + write_lock(&ip4_frags.lock); To address the issue with exporting the number of queues and the amount of memory occupied by queues outside the .c file they are declared in, I introduce a couple of helpers. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 1 次提交
-
-
由 Jan-Bernd Themann 提交于
This patch provides generic Large Receive Offload (LRO) functionality for IPv4/TCP traffic. LRO combines received tcp packets to a single larger tcp packet and passes them then to the network stack in order to increase performance (throughput). The interface supports two modes: Drivers can either pass SKBs or fragment lists to the LRO engine. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2007 1 次提交
-
-
由 David S. Miller 提交于
With help from Chris Wedgwood. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 4 次提交
-
-
由 Herbert Xu 提交于
This patch moves the SNMP code shared between IPv4/IPv6 from proc.c into net/ipv4/af_inet.c. This makes sense because these functions aren't specific to /proc. As a result we can again skip proc.o if /proc is disabled. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This is an implementation of TCP Illinois invented by Shao Liu at University of Illinois. It is a another variant of Reno which adapts the alpha and beta parameters based on RTT. The basic idea is to increase window less rapidly as delay approaches the maximum. See the papers and talks to get a more complete description. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Angelo P. Castellani 提交于
YeAH-TCP is a sender-side high-speed enabled TCP congestion control algorithm, which uses a mixed loss/delay approach to compute the congestion window. It's design goals target high efficiency, internal, RTT and Reno fairness, resilience to link loss while keeping network elements load as low as possible. For further details look here: http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdfSigned-off-by: NAngelo P. Castellani <angelo.castellani@gmail.con> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 1 次提交
-
-
由 Gerrit Renker 提交于
This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2006 1 次提交
-
-
由 Diego Beltrami 提交于
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as specified by the ietf draft at the following link: http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt The patch provides only single family support (i.e. inner family = outer family). Signed-off-by: NDiego Beltrami <diego.beltrami@gmail.com> Signed-off-by: NMiika Komu <miika@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NAbhinav Pathak <abhinav.pathak@hiit.fi> Signed-off-by: NJeff Ahrenholz <ahrenholz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 1 次提交
-
-
由 Paul Moore 提交于
Add support for the Commercial IP Security Option (CIPSO) to the IPv4 network stack. CIPSO has become a de-facto standard for trusted/labeled networking amongst existing Trusted Operating Systems such as Trusted Solaris, HP-UX CMW, etc. This implementation is designed to be used with the NetLabel subsystem to provide explicit packet labeling to LSM developers. The CIPSO/IPv4 packet labeling works by the LSM calling a NetLabel API function which attaches a CIPSO label (IPv4 option) to a given socket; this in turn attaches the CIPSO label to every packet leaving the socket without any extra processing on the outbound side. On the inbound side the individual packet's sk_buff is examined through a call to a NetLabel API function to determine if a CIPSO/IPv4 label is present and if so the security attributes of the CIPSO label are returned to the caller of the NetLabel API function. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2006 1 次提交
-
-
由 David S. Miller 提交于
This reverts: f890f921 The inclusion of TCP Compound needs to be reverted at this time because it is not 100% certain that this code conforms to the requirements of Developer's Certificate of Origin 1.1 paragraph (b). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2006 5 次提交
-
-
由 Stephen Hemminger 提交于
This adds a new module for tracking TCP state variables non-intrusively using kprobes. It has a simple /proc interface that outputs one line for each packet received. A sample usage is to collect congestion window and ssthresh over time graphs. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Angelo P. Castellani 提交于
TCP Compound is a sender-side only change to TCP that uses a mixed Reno/Vegas approach to calculate the cwnd. For further details look here: ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdfSigned-off-by: NAngelo P. Castellani <angelo.castellani@gmail.com> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bin Zhou 提交于
TCP Veno module is a new congestion control module to improve TCP performance over wireless networks. The key innovation in TCP Veno is the enhancement of TCP Reno/Sack congestion control algorithm by using the estimated state of a connection based on TCP Vegas. This scheme significantly reduces "blind" reduction of TCP window regardless of the cause of packet loss. This work is based on the research paper "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." C. P. Fu, S. C. Liew, IEEE Journal on Selected Areas in Communication, Feb. 2003. Original paper and many latest research works on veno: http://www.ntu.edu.sg/home/ascpfu/veno/veno.htmlSigned-off-by: NBin Zhou <zhou0022@ntu.edu.sg> Cheng Peng Fu <ascpfu@ntu.edu.sg> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wong Hoi Sing Edison 提交于
TCP Low Priority is a distributed algorithm whose goal is to utilize only the excess network bandwidth as compared to the ``fair share`` of bandwidth as targeted by TCP. Available from: http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf Original Author: Aleksandar Kuzmanovic <akuzma@northwestern.edu> See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation. As of 2.6.13, Linux supports pluggable congestion control algorithms. Due to the limitation of the API, we take the following changes from the original TCP-LP implementation: o We use newReno in most core CA handling. Only add some checking within cong_avoid. o Error correcting in remote HZ, therefore remote HZ will be keeped on checking and updating. o Handling calculation of One-Way-Delay (OWD) within rtt_sample, sicne OWD have a similar meaning as RTT. Also correct the buggy formular. o Handle reaction for Early Congestion Indication (ECI) within pkts_acked, as mentioned within pseudo code. o OWD is handled in relative format, where local time stamp will in tcp_time_stamp format. Port from 2.4.19 to 2.6.16 as module by: Wong Hoi Sing Edison <hswong3i@gmail.com> Hung Hing Lun <hlhung3i@gmail.com> Signed-off-by: NWong Hoi Sing Edison <hswong3i@gmail.com> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the structure xfrm_mode. It is meant to represent the operations carried out by transport/tunnel modes. By doing this we allow additional encapsulation modes to be added without clogging up the xfrm_input/xfrm_output paths. Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and BEET modes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
Basically this patch moves the generic tunnel protocol stuff out of xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c and tunnel6 respectively. The reason for this is that the problem that Hugo uncovered is only the tip of the iceberg. The real problem is that when we removed the dependency of ipip on xfrm4_tunnel we didn't really consider the module case at all. For instance, as it is it's possible to build both ipip and xfrm4_tunnel as modules and if the latter is loaded then ipip simply won't load. After considering the alternatives I've decided that the best way out of this is to restore the dependency of ipip on the non-xfrm-specific part of xfrm4_tunnel. This is acceptable IMHO because the intention of the removal was really to be able to use ipip without the xfrm subsystem. This is still preserved by this patch. So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles the arbitration between the two. The order of processing is determined by a simple integer which ensures that ipip gets processed before xfrm4_tunnel. The situation for ICMP handling is a little bit more complicated since we may not have enough information to determine who it's for. It's not a big deal at the moment since the xfrm ICMP handlers are basically no-ops. In future we can deal with this when we look at ICMP caching in general. The user-visible change to this is the removal of the TUNNEL Kconfig prompts. This makes sense because it can only be used through IPCOMP as it stands. The addition of the new modules shouldn't introduce any problems since module dependency will cause them to be loaded. Oh and I also turned some unnecessary pskb's in IPv6 related to this patch to skb's. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few unneccessary includes. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
Replace existing BIC version 1.1 with new version 2.0. The main change is to replace the window growth function with a cubic function as described in: http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdfSigned-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2005 7 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
With this the previous setup is back, i.e. tcp_diag can be built as a module, as dccp_diag and both share the infrastructure available in inet_diag. If one selects CONFIG_INET_DIAG as module CONFIG_INET_TCP_DIAG will also be built as a module, as will CONFIG_INET_DCCP_DIAG, if CONFIG_IP_DCCP was selected static or as a module, if CONFIG_INET_DIAG is y, being statically linked CONFIG_INET_TCP_DIAG will follow suit and CONFIG_INET_DCCP_DIAG will be built in the same manner as CONFIG_IP_DCCP. Now to aim at UDP, converting it to use inet_hashinfo, so that we can use iproute2 for UDP sockets as well. Ah, just to show an example of this new infrastructure working for DCCP :-) [root@qemu ~]# ./ss -dane State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 0 *:5001 *:* ino:942 sk:cfd503a0 ESTAB 0 0 127.0.0.1:5001 127.0.0.1:32770 ino:943 sk:cfd50a60 ESTAB 0 0 127.0.0.1:32770 127.0.0.1:5001 ino:947 sk:cfd50700 TIME-WAIT 0 0 127.0.0.1:32769 127.0.0.1:5001 timer:(timewait,3.430ms,0) ino:0 sk:cf209620 Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Next changeset will introduce net/ipv4/tcp_diag.c, moving the code that was put transitioanlly in inet_diag.c. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Next changeset will rename tcp_diag.[ch] to inet_diag.[ch]. I'm taking this longer route so as to easy review, making clear the changes made all along the way. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Completing the previous changeset, this also generalises tcp_v4_synq_add, renaming it to inet_csk_reqsk_queue_hash_add, already geing used in the DCCP tree, which I plan to merge RSN. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
And also some TIME_WAIT functions. [acme@toy net-2.6.14]$ grep built-in /tmp/before.size /tmp/after.size /tmp/before.size: 282955 13122 9312 305389 4a8ed net/ipv4/built-in.o /tmp/after.size: 281566 13122 9312 304000 4a380 net/ipv4/built-in.o [acme@toy net-2.6.14]$ I kept them still inlined, will uninline at some point to see what would be the performance difference. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
Netfilter cleanup - Move ipv4 code from net/core/netfilter.c to net/ipv4/netfilter.c - Move ipv6 netfilter code from net/ipv6/ip6_output.c to net/ipv6/netfilter.c Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2005 1 次提交
-
-
由 Matt Mackall 提交于
Move in_aton to allow netpoll and pktgen to work without the rest of the IPv4 stack. Fix whitespace and add comment for the odd placement. Delete now-empty net/ipv4/utils.c Re-enable netpoll/netconsole without CONFIG_INET Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2005 3 次提交
-
-
由 John Heffner 提交于
This patch implements Tom Kelly's Scalable TCP congestion control algorithm for the modular framework. The algorithm has some nice scaling properties, and has been used a fair bit in research, though is known to have significant fairness issues, so it's not really suitable for general purpose use. Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Baruch Even 提交于
H-TCP is a congestion control algorithm developed at the Hamilton Institute, by Douglas Leith and Robert Shorten. It is extending the standard Reno algorithm with mode switching is thus a relatively simple modification. H-TCP is defined in a layered manner as it is still a research platform. The basic form includes the modification of beta according to the ratio of maxRTT to min RTT and the alpha=2*factor*(1-beta) relation, where factor is dependant on the time since last congestion. The other layers improve convergence by adding appropriate factors to alpha. The following patch implements the H-TCP algorithm in it's basic form. Signed-Off-By: NBaruch Even <baruch@ev-en.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
TCP Vegas code modified for the new TCP infrastructure. Vegas now uses microsecond resolution timestamps for better estimation of performance over higher speed links. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-