The reference to err_no was left around after a previous code refactor.
We never use the value, and it doesn't seem to be used in side a hidden
macro reference. Discovered via cppcheck.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The SYSTIME_CFG.Adjust Direction bit is actually supposed to indicate
that the adjustment is positive. Fix the code to align correctly with
hardware and documentation.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds the __attribute__((packed)) indicator to some structures
which are overlayed onto a TLV message. These structures must be packed
as small as possible in order to correctly align when copied into the
mailbox buffer. Without doing so, the receiving mailbox code incorrectly
parses the values and we get invalid message responses from the switch
manager software.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

During initialization, the VF counts its rings by walking the TQDLOC
registers. This works only if the TQMAP/RQMAP registers are set to map
all of the out-of-bound rings back to the first one. This allows the VF
to cleanly detect when it has run out of queues. Update the PF code so
that it resets the empty TQMAP/RQMAP registers post-VFLR to prevent
innocent VF drivers from triggering malicious driver events.
Signed-off-by: NMatthew Vick <matthew.vick@intel.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently, we don't notify the switch at all when the PF
administratively sets a new VLAN or MAC address. This causes the old
addresses to remain valid on the switch table. Since the PF is
overriding any configuration done directly by the VF, we choose to
simply re-create the LPORT for the VF. This does mean that all rules for
the VF will be dropped when we set something directly via the PF, but it
prevents some weird issues where the MAC/VLAN table retains some stale
configuration.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch cleans up the use of dma_get_required_mask and uses the
simpler dma_set_mask_and_coherent function instead of doing these as
separate steps.

I removed the dma_get_required_mask call because based on some minimal
testing it appears that either (a) we're not doing the right thing with
the call or (b) we don't need it anyways. If the value returned is
<48bits, we'll end up trying with 48 bits anyways. If it's over 48bits,
fm10k can't support that anyways, and we should try 48bits. If 48bits
fails, we'll fallback to 32bits. This cleans up some very funky code.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Also use %d for error values, since printing in hexadecimal is probably
not helpful.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

l2_accel was checked for NULL at the top of fm10k_dfwd_del_station, and
we return if it is not defined. Due to this, we already know it can't be
null here so a separate check is meaningless. Discovered via cppcheck.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The value will never be negative, and we use the %u print format. Thus,
use unsigned int for the loop counter. Issue found using cppcheck.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This prevents a memory leak in fm10k_set_ringparams. The leak occurs
because we go down, change ring parameters, and then come up. However,
fm10k_down on its own is not clearing the Rx rings. Since fm10k_up
assumes the rings are clean we basically drop the buffers and leak a
bunch of memory. Eventually we hit dirty page faults and reboot the
system. This issue does not occur elsewhere because other flows that
involve fm10k_down go through fm10k_close which immediately called
fm10k_free_all_rx_resources which properly cleans the rings.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch resolves a bug in the ts_tx_enqueue code responsible for a
NULL pointer dereference and invalid access of the skb list. We
incorrectly freed the actual skb we found instead of our copy. Thus the
skb queue is essentially invalidated. Resolve this by freeing our clone
in the cases where we did not add it to the queue. This also avoids the
skb memory leak caused by failure to free the clone.

[  589.719320] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  589.722344] IP: [<ffffffffa0310e60>] fm10k_ts_tx_subtask+0xb0/0x160 [fm10k]
[  589.723796] PGD 0
[  589.725228] Oops: 0000 [#1] SMP
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch simplifies the code flow for setting the IN_PROGRESS bit of
the shinfo for an skb we will be timestamping.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

skb_complete_tx_timestamp is intended for use by PHY drivers which
implement a different method of returning timestamps. This method is
intended to be used after a PHY driver accepts a cloned packet via its
phy_driver.txtstamp function. It is not correct to use in the standard
ethernet driver such as fm10k. This patch fixes the following possible
kernel panic.

[ 2744.552896] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W  OE  3.19.3-200.fc21.x86_64 #1
[ 2744.552899] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.8x23.060520140825 06/05/2014
[ 2744.552901]  0000000000000000 2f4c8b10ea3f9848 ffff88081ee03a38 ffffffff8176e215
[ 2744.552906]  0000000000000000 0000000000000000 ffff88081ee03a78 ffffffff8109bc1a
[ 2744.552910]  ffff88081ee03c50 ffff88080e55fc00 ffff88080e55fc00 ffffffff81647c50
[ 2744.552914] Call Trace:
[ 2744.552917]  <IRQ>  [<ffffffff8176e215>] dump_stack+0x45/0x57
[ 2744.552931]  [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[ 2744.552936]  [<ffffffff81647c50>] ? skb_queue_purge+0x20/0x40
[ 2744.552941]  [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[ 2744.552946]  [<ffffffff81646911>] skb_release_head_state+0xe1/0xf0
[ 2744.552950]  [<ffffffff81647b26>] skb_release_all+0x16/0x30
[ 2744.552954]  [<ffffffff81647ba6>] kfree_skb+0x36/0x90
[ 2744.552958]  [<ffffffff81647c50>] skb_queue_purge+0x20/0x40
[ 2744.552964]  [<ffffffff81751f8d>] packet_sock_destruct+0x1d/0x90
[ 2744.552968]  [<ffffffff81642053>] __sk_free+0x23/0x140
[ 2744.552973]  [<ffffffff81642189>] sk_free+0x19/0x20
[ 2744.552977]  [<ffffffff81647d60>] skb_complete_tx_timestamp+0x50/0x60
[ 2744.552988]  [<ffffffffa02eee40>] fm10k_ts_tx_hwtstamp+0xd0/0x100 [fm10k]
[ 2744.552994]  [<ffffffffa02e054e>] fm10k_1588_msg_pf+0x12e/0x140 [fm10k]
[ 2744.553002]  [<ffffffffa02edf1d>] fm10k_tlv_msg_parse+0x8d/0xc0 [fm10k]
[ 2744.553010]  [<ffffffffa02eb2d0>] fm10k_mbx_dequeue_rx+0x60/0xb0 [fm10k]
[ 2744.553016]  [<ffffffffa02ebf98>] fm10k_sm_mbx_process+0x178/0x3c0 [fm10k]
[ 2744.553022]  [<ffffffffa02e09ca>] fm10k_msix_mbx_pf+0xfa/0x360 [fm10k]
[ 2744.553030]  [<ffffffff811030a7>] ? get_next_timer_interrupt+0x1f7/0x270
[ 2744.553036]  [<ffffffff810f2a47>] handle_irq_event_percpu+0x77/0x1a0
[ 2744.553041]  [<ffffffff810f2bab>] handle_irq_event+0x3b/0x60
[ 2744.553045]  [<ffffffff810f5d6e>] handle_edge_irq+0x6e/0x120
[ 2744.553054]  [<ffffffff81017414>] handle_irq+0x74/0x140
[ 2744.553061]  [<ffffffff810bb54a>] ? atomic_notifier_call_chain+0x1a/0x20
[ 2744.553066]  [<ffffffff8177777f>] do_IRQ+0x4f/0xf0
[ 2744.553072]  [<ffffffff8177556d>] common_interrupt+0x6d/0x6d
[ 2744.553074]  <EOI>  [<ffffffff81609b16>] ? cpuidle_enter_state+0x66/0x160
[ 2744.553084]  [<ffffffff81609b01>] ? cpuidle_enter_state+0x51/0x160
[ 2744.553087]  [<ffffffff81609cf7>] cpuidle_enter+0x17/0x20
[ 2744.553092]  [<ffffffff810de101>] cpu_startup_entry+0x321/0x3c0
[ 2744.553098]  [<ffffffff81764497>] rest_init+0x77/0x80
[ 2744.553103]  [<ffffffff81d4f02c>] start_kernel+0x4a4/0x4c5
[ 2744.553107]  [<ffffffff81d4e120>] ? early_idt_handlers+0x120/0x120
[ 2744.553110]  [<ffffffff81d4e4d7>] x86_64_start_reservations+0x2a/0x2c
[ 2744.553114]  [<ffffffff81d4e62b>] x86_64_start_kernel+0x152/0x175
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change fixes an issue with adding an invalid multicast address
using the iproute2 tool (ip maddr add <MADDR> dev <dev>). The iproute2
tool and the kernel do not validate or filter the multicast addresses
when adding them to the multicast list. Thus, when synchronizing this
list with an invalid entry, the action will be aborted with an error
since the fm10k driver currently validates the list. Consequently,
multicast entries beyond the invalid one will not be processed and
communicated with the switch via the mailbox. This change makes it so
that invalid addresses will simply be skipped and allows synchronizing
the full list to proceed.
Signed-off-by: NNgai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change folds the fm10k_pull_tail call into fm10k_add_rx_frag.  The
advantage to doing this is that the fragment doesn't have to be modified
after it is added to the skb.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Accessing current->pid/uid from cls_bpf may lead to misleading results and
should not be used when TC classifiers need accurate information about pid/uid.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this change, modprobe -r sfc hits the BUG_ON() in
efx_pci_remove_main().

Fixes: e7fef9b4 ("sfc: add sysfs entry to control MCDI tracing")
Reported-by: NJarod Wilson <jarod@redhat.com>
Reviewed-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Craig Gallek says:

====================
Socket destruction events via netlink sock_diag

This series extends the netlink sock_diag interface to broadcast
socket information as they are being destroyed.  The current
interface is poll based and can not be used to retreive information
about sockets that are destroyed between poll intervals.

Only inet sockets are broadcast in this implementation, but other
families could easily be added as needed in the future.

If this patch set is accepted, a follow-up patch to the ss utility
in the iproute2 suite will also be submitted.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This get_info handler will simply dispatch to the appropriate
existing inet protocol handler.

This patch also includes a new netlink attribute
(INET_DIAG_PROTOCOL).  This attribute is currently only used
for multicast messages.  Without this attribute, there is no
way of knowing the IP protocol used by the socket information
being broadcast.  This attribute is not necessary in the 'dump'
variant of this protocol (though it could easily be added)
because dump requests are issued for specific family/protocol
pairs.

Tested: ss -E (note, the -E option has not yet been merged into
the upstream version of ss).
Signed-off-by: NCraig Gallek <kraig@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously, there was no clear distinction between the inet protocols
that used struct tcp_info to report information and those that didn't.
This change adds a specific size attribute to the inet_diag_handler
struct which defines these interfaces.  This will make dispatching
sock_diag get_info requests identical for all inet protocols in a
following patch.

Tested: ss -au
Tested: ss -at
Signed-off-by: NCraig Gallek <kraig@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These groups will contain socket-destruction events for
AF_INET/AF_INET6, IPPROTO_TCP/IPPROTO_UDP.

Near the end of socket destruction, a check for listeners is
performed.  In the presence of a listener, rather than completely
cleanup the socket, a unit of work will be added to a private
work queue which will first broadcast information about the socket
and then finish the cleanup operation.
Signed-off-by: NCraig Gallek <kraig@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
mlx4 driver update (+ new VF ndo)

This series from Eran and Hadar is further dealing with traffic
counters in the mlx4 driver, this time mostly around SRIOV.

We added a new ndo to read the VF counters through the PF netdev
netlink infrastructure plus mlx4 implementation for that ndo.

changes from V0:
  - applied feedback from John to use nested netlink encoding
    for the VF counters so we can extend it later
  - add handling of single ported VFs in the mlx4_en driver new ndo
  - avoid chopping the FW counters from 64 to 32 bits in mlx4_en PF flow
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the ndo to gather VF statistics through the PF.

All counters related to this VF are stored in a per slave
list, run over the slave's list and collect all statistics.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ndo_get_vf_stats where the PF retrieves and fills the VFs traffic
statistics. We encode the VF stats in a nested manner to allow for
future extensions.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow the user to observe the PF own statistics using ethtool with pf_
prefixed counter names.

Those counters are the PF statistics out of the overall port statistics.
Every PF QP is attached to a counter and the summary of those counters
is the PF statistics.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is an infrastructure step for querying VF and PF counters.

This code was in the IB driver, move it to the mlx4 core driver
so it will be accessible for more use cases.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As IB VFs are not capable to read the port counters through MADs,
move there to read their own QP counters to gather statistics.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is an infrastructure step to attach all the QPs opened from the
IB driver to a counter in order to collect VF stats from the PF using
those counters.

If the port's type is Ethernet, the counter policy demands two counters
per port (one for RoCE and one for Ethernet). The port default counter
(allocated in mlx4_core) is used for the Ethernet netdev QPs and we
allocate another counter for RoCE.

If the port's traffic is Infiniband, the counter policy demands
one counter per port, so it can use the port's default counter.

Also, Add 'allocated' flag for each counter in order to clean it at
unload.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Default counter per port will be allocated at the mlx4 core driver load.

Every QP opened by the Ethernet driver will be attached to the port's default
counter.  This is an infrastructure step to collect VF statistics from the PF.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Counter will get its port attribute within the resource tracker when
the first QP attached to it is modified to RTR. If a QP is counter-less,
an attempt to create a new counter with assigned port will be made.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each physical function has a guarantee of two counters per port, one
for a default counter and one for the IB driver.

Each virtual function has a guarantee of one counter per port.
All other counters are free and can be obtained on demand.

This is a preparation step for supporting a get_vf_stats ndo call,
so we can promise a counter for every VF in order to collect their
statistics from the PF context.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since virtual functions get their counters indices allocation from the PF,
allocate counters indices bitmap only in case the function isn't virtual.

Also, check that the device has counters to allocate before creating the
indices bitmap table.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reserve the last valid counter index for "sink" counter, when a
new counter cannot be allocated, the driver will use this counter.

In order to avoid allocating this counter on any other flow, fix the
indices bitmap allocation range, and reserve the sink counter index.

Add macro for the sink counter index and replace all appearences of the
index with the macro.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add resetting the counter data to the free counter flow, so the counter's
data won't be accessible anymore if querying the counter. Also, on next
counter allocation (to another VM for example), it will be fresh and clear.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If counters are not supported by the device. The indices bitmap table is not
allocated during initialization. Add the symmetrical check before cleaning
the counters bitmap table or freeing a counter.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to delete from offload the device externally learnded fdbs when any
one of these events happen:

1) Bridge ages out fdb.  (When bridge is doing ageing vs. device doing
ageing.  If device is doing ageing, it would send SWITCHDEV_FDB_DEL
directly).

2) STP state change flushes fdbs on port.

3) User uses sysfs interface to flush fdbs from bridge or bridge port:

	echo 1 >/sys/class/net/BR_DEV/bridge/flush
	echo 1 >/sys/class/net/BR_PORT/brport/flush

4) Offload driver send event SWITCHDEV_FDB_DEL to delete fdb entry.

For rocker, we can now get called to delete fdb entry in wait and nowait
contexts, so set NOWAIT flag when deleting fdb entry.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Ortiz says:

====================
NFC 4.2 pull request

This is the NFC pull request for 4.2.

- NCI drivers can now define their own handlers for processing
  proprietary NCI responses and notifications.

- NFC vendors can use a dedicated netlink API to send their own
  proprietary commands, like e.g. all commands needed to implement
  vendor specific manufacturing tools.

- A new generic NCI over UART driver against which any NCI chipset
  running on top of a serial interface can register.

- The st21nfcb driver is renamed to st-nci as it can and will support
  most of ST Microelectronics NCI chipsets.

- The st21nfcb driver can put its CLF in hibernate mode and save
  significant amount of power.

- A few st21nfcb minor fixes.

- The NXP NCI driver now supports ACPI enumeration.

- The Marvell NCI driver now supports both USB and serial
  physical interfaces.

- The Marvell NCI drivers also supports NCI frames being muxed
  over HCI. This is a setting that can be defined by a DT property.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bonding: extend the 3ad exported attributes

These are two small patches that export actor_oper_port_state and
partner_oper_port_state via netlink and sysfs, until now they were only
exported via bond's proc entry. If this set gets accepted I have an iproute2
patch prepared that will export them with which I tested these changes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export the partner_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
partner_oper state, it is already exported via bond's proc entry.
Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export the actor_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
actor_oper state, it is already exported via bond's proc entry.
Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>