In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. The stack allocation will be made a fixed size in a
later patch to the crypto subsystem.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add support for HE in mac8011_hwsim, conforming with P802.11ax_D2.0.
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Since (QoS) NDP frames shouldn't be put into aggregation nor are
assigned real sequence numbers, etc. it's better to treat them as
non-data packets and not put them on the normal TXQs, for example
when building A-MPDUs they need to be treated specially, and they
are more used for management (e.g. to see if the station is alive)
anyway.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In both tcp_splice_read() and tcp_recvmsg(), we already test
sock_flag(sk, SOCK_DONE) right before evaluating sk->sk_state,
so "!sock_flag(sk, SOCK_DONE)" is always true.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Spectrum-2 small ACL preparations

This is the first set of changes towards Spectrum-2 support in the mlxsw
driver. It contains small changes that prepare the code for the later
introduction of Spectrum-2 support.

The Spectrum-2 ASIC uses an algorithmic TCAM (A-TCAM) instead of a
circuit TCAM (C-TCAM) as Spectrum, and thus most of the changes are
around the ACL code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The helper should return always KVD linear index of the second set.
It is unused now, but going to be used soon.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In Spectrum-2, the real action sets are always in KVD linear. The first
set is always empty and contains only pointer to the first real set in
KVD linear. So provide possibility to specify the first set is the dummy
one.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum-2 need a slightly different handling of flexible actions. So
put an ops pointer in mlxsw_sp struct and rename it.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SRC_SYS_PORT is passed as 8 bit value down to hw anyway, so cap it
in the driver as well. Also, in Spectrum-2 the FW iface for SRC_SYS_PORT
is only 8 bits, so prepare for it.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since in Spectrum-2, MACs are split and IP addresses are split as well,
in order to use the same elements for Spectrum and Spectrum-2 split them
now.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The lowest 16 bits of tp->prio are always zero, so ignore them with a
shift.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce Flex2 key type for PTAR register which is used in Spectrum-2.
Also, extend mlxsw_reg_ptar_pack() to set the value according to the
caller.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is specific for Spectrum as Spectrum-2 has completely different key
blocks.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kbuild test robot reports:

>> net/sched/act_api.c:71:15: sparse: incorrect type in initializer (different address spaces) @@    expected struct tc_cookie [noderef] <asn:4>*__ret @@    got [noderef] <asn:4>*__ret @@
   net/sched/act_api.c:71:15:    expected struct tc_cookie [noderef] <asn:4>*__ret
   net/sched/act_api.c:71:15:    got struct tc_cookie *new_cookie
>> net/sched/act_api.c:71:13: sparse: incorrect type in assignment (different address spaces) @@    expected struct tc_cookie *old @@    got struct tc_cookie [noderef] <struct tc_cookie *old @@
   net/sched/act_api.c:71:13:    expected struct tc_cookie *old
   net/sched/act_api.c:71:13:    got struct tc_cookie [noderef] <asn:4>*[assigned] __ret
>> net/sched/act_api.c:132:48: sparse: dereference of noderef expression

Handle this in the usual way by force casting away the __rcu annotation
when we are using xchg() on it.

Fixes: eec94fdb ("net: sched: use rcu for action cookie update")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Modify action API for implementing lockless actions

Currently, all netlink protocol handlers for updating rules, actions and
qdiscs are protected with single global rtnl lock which removes any
possibility for parallelism. This patch set is a first step to remove
rtnl lock dependency from TC rules update path.

Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added.
Handlers registered with this flag are called without RTNL taken. End
goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER,
etc.) to be registered with UNLOCKED flag to allow parallel execution.
However, there is no intention to completely remove or split rtnl lock
itself. This patch set addresses specific problems in action API that
prevents it from being executed concurrently. This patch set does not
completely unlock rules or actions update path. Additional patch sets
are required to refactor individual actions and filters update for
parallel execution.

As a preparation for executing TC rules update handlers without rtnl
lock, action API code was audited to determine areas that assume
external synchronization with rtnl lock and must be changed to allow
safe concurrent access with following results:

1. Action idr is already protected with spinlock. However, some code
   paths assume that idr state is not changes between several
   consecutive tcf_idr_* function calls.
2. tc_action reference and bind counters are implemented as plain
   integers. They purpose was to allow single actions to be shared
   between multiple filters, not to provide means for concurrent
   modification.
3. tc_action 'cookie' pointer field is not protected against
   modification.
4. Action API functions, that work with set of actions, use intrusive
   linked list, which cannot be used concurrently without additional
   synchronization.
5. Action API functions don't take reference to actions while using
   them, assuming external synchronization with rtnl lock.

Following solutions to these problems are implemented:

1. To remove assumption that idr state doesn't change between tcf_idr_*
   calls, implement new functions that atomically perform several
   operations on idr without releasing idr spinlock. (function to
   atomically lookup and delete action by index, function to atomically
   check if action exists and allocate new one if necessary, etc.)
2. Use atomic operations on counters to make them suitable for
   concurrent get/put operations.
3. Data that 'cookie' points to is never modified, so it enough to
   refactor it to rcu pointer to prevent concurrent de-allocation.
4. Action API doesn't actually use any linked list specific operations
   on actions intrusive linked list, so it can be refactored to array in
   straightforward manner.
5. Always take reference to action while accessing it in action API.
   tcf_idr_search function modified to take reference to action before
   returning it, so there is no way to lookup an action without
   incrementing its reference counter. All users of this function are
   modified to release the reference, after they done using action. With
   all users using reference counting, it is now safe to concurrently
   delete actions.

Additionally, actions init function signature was expanded with
'rtnl_held' argument, that allows actions that have internal dependency
on rtnl lock to take/release it when necessary.

Since only shared state in action API module are actions themselves and
action idr, these changes are sufficient to not to rely on global rtnl
lock for protection of internal action API data structures.

Changes from V5 to V6:
- Rebase on current net-next
- When action is deleted, set pointer in actions array to NULL to
  prevent double freeing.

Changes from V4 to V5:
- Change action delete API to track actions that were deleted, to
  prevent releasing them on error.

Changes from V3 to V4:
- Expand cover letter.
- Reduce actions array size in tcf_action_init_1.
- Rebase on latest net-next.

Changes from V2 to V3:
- Re-send with changelog copied to individual patches.

Changes from V1 to V2:
- Removed redundant actions ops lookup during delete.
- Merge action ops delete definition and implementation.
- Assume all actions have delete implemented and don't check for it
  explicitly.
- Resplit action lookup/release code to prevent memory leaks in
  individual patches.
- Make __tcf_idr_check function static
- Remove unique idr insertion function. Change original idr insert to do
  the same thing.
- Merge changes that take reference to action when performing lookup and
  changes that account for this additional reference when dumping action
  to user space into single patch.
- Change convoluted commit message.
- Rename "unlocked" to "rtnl_held" for clarity.
- Remove estimator lock add patch.
- Refactor action check-alloc code into standalone function.
- Rename tcf_idr_find_delete to tcf_idr_delete_index.
- Rearrange variable definitions in tc_action_delete.
- Add patch that refactors action API code to use array of pointers to
  actions instead of intrusive linked list.
- Expand cover letter.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Act API used linked list to pass set of actions to functions. It is
intrusive data structure that stores list nodes inside action structure
itself, which means it is not safe to modify such list concurrently.
However, action API doesn't use any linked list specific operations on this
set of actions, so it can be safely refactored into plain pointer array.

Refactor action API to use array of pointers to tc_actions instead of
linked list. Change argument 'actions' type of exported action init,
destroy and dump functions.
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement function that atomically checks if action exists and either takes
reference to it, or allocates idr slot for action index to prevent
concurrent allocations of actions with same index. Use EBUSY error pointer
to indicate that idr slot is reserved.

Implement cleanup helper function that removes temporary error pointer from
idr. (in case of error between idr allocation and insertion of newly
created action to specified index)

Refactor all action init functions to insert new action to idr using this
API.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change action API to assume that action init function always takes
reference to action, even when overwriting existing action. This is
necessary because action API continues to use action pointer after init
function is done. At this point action becomes accessible for concurrent
modifications, so user must always hold reference to it.

Implement helper put list function to atomically release list of actions
after action API init code is done using them.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return from action init function with reference to action taken,
even when overwriting existing action.

Action init API initializes its fourth argument (pointer to pointer to tc
action) to either existing action with same index or newly created action.
In case of existing index(and bind argument is zero), init function returns
without incrementing action reference counter. Caller of action init then
proceeds working with action, without actually holding reference to it.
This means that action could be deleted concurrently.

Change action init behavior to always take reference to action before
returning successfully, in order to protect from concurrent deletion.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement helper delete function that uses new action ops 'delete', instead
of destroying action directly. This is required so act API could delete
actions by index, without holding any references to action that is being
deleted.

Implement function __tcf_action_put() that releases reference to action and
frees it, if necessary. Refactor action deletion code to use new put
function and not to rely on rtnl lock. Remove rtnl lock assertions that are
no longer needed.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend action ops with 'delete' function. Each action type to implements
its own delete function that doesn't depend on rtnl lock.

Implement delete function that is required to delete actions without
holding rtnl lock. Use action API function that atomically deletes action
only if it is still in action idr. This implementation prevents concurrent
threads from deleting same action twice.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement new action API function that atomically finds and deletes action
from idr by index. Intended to be used by lockless actions that do not rely
on rtnl lock.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without rtnl lock protection it is no longer safe to use pointer to tc
action without holding reference to it. (it can be destroyed concurrently)

Remove unsafe action idr lookup function. Instead of it, implement safe tcf
idr check function that atomically looks up action in idr and increments
its reference and bind counters. Implement both action search and check
using new safe function

Reference taken by idr check is temporal and should not be accounted by
userspace clients (both logically and to preserver current API behavior).
Subtract temporal reference when dumping action to userspace using existing
tca_get_fill function arguments.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add additional 'rtnl_held' argument to act API init functions. It is
required to implement actions that need to release rtnl lock before loading
kernel module and reacquire if afterwards.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change type of action reference counter to refcount_t.

Change type of action bind counter to atomic_t.
This type is used to allow decrementing bind counter without testing
for 0 result.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement functions to atomically update and free action cookie
using rcu mechanism.
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 'clone' action to kernel datapath by using existing functions.
When actions within clone don't modify the current flow, the flow
key is not cloned before executing clone actions.

This is a follow up patch for this incomplete work:
https://patchwork.ozlabs.org/patch/722096/

v1 -> v2:
Refactor as advised by reviewer.
Signed-off-by: NYifeng Sun <pkusunyifeng@gmail.com>
Signed-off-by: NAndy Zhou <azhou@ovn.org>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix build warnings in drivers/isdn/capi/ when CONFIG_PROC_FS is not
enabled by marking the unused functions as __maybe_unused.

../drivers/isdn/capi/capi.c:1324:12: warning: 'capi20_proc_show' defined but not used [-Wunused-function]
../drivers/isdn/capi/capi.c:1347:12: warning: 'capi20ncci_proc_show' defined but not used [-Wunused-function]
../drivers/isdn/capi/capidrv.c:2454:12: warning: 'capidrv_proc_show' defined but not used [-Wunused-function]
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: isdn4linux@listserv.isdn4linux.de (subscribers-only)
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a build warning in connector.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/connector/connector.c:242:12: warning: 'cn_proc_show' defined but not used [-Wunused-function]
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variable next_rx is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'next_rx' set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Khoronzhuk says:

====================
allow PTP 224.0.0.107 to be timestamped

Allows packets with 224.0.0.107 mcas address for PTP packets to be timestamped.
Only for cpsw version > v1.15.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tested on AM572x with cpsw v1.15 for PTP sync and delay_req messages.
It doesn't work on cpsw v1.12, so added only for cpsw v > 1.15.

Command for testing:
ptp4l -P -4 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg
where ptp.cfg:

[global]
tx_timestamp_timeout     20
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's needed to avoid checkpatch warnings for farther changes.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I link error on 32-bit ARM points to yet another arithmetic bug:

drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o: In function `tc_setup_cbs':
stmmac_tc.c:(.text+0x148): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x1fc): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x308): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x320): undefined reference to `__aeabi_uldivmod'
stmmac_tc.c:(.text+0x33c): undefined reference to `__aeabi_uldivmod'
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.o:stmmac_tc.c:(.text+0x3a4): more undefined references to `__aeabi_uldivmod' follow

I observe that the last change to add the 'ul' prefix was incorrect,
as it did not turn the result of the multiplication into a 64-bit
expression on 32-bit architectures. Further, it seems that the
do_div() macro gets confused by the fact that we pass a signed
variable rather than unsigned into it.

This changes the code to instead use the div_s64() helper that is
meant for signed division, along with changing the constant suffix
to 'll' to actually make it a 64-bit argument everywhere, fixing
both of the issues I pointed out.

I'm not completely convinced that this makes the code correct, but
I'm fairly sure that we have two problems less than before.

Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC")
Fixes: c18a9c09 ("net: stmmac_tc: use 64-bit arithmetic instead of 32-bit")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently a link is declared stale and reset if there has been 100
repeated attempts to retransmit the same packet. However, in certain
infrastructures we see that packet (NACK) duplicates and delays may
cause such retransmit attempts to occur at a high rate, so that the
peer doesn't have a reasonable chance to acknowledge the reception
before the 100-limit is hit. This may take much less than the
stipulated link tolerance time, and despite that probe/probe replies
otherwise go through as normal.

We now extend the criteria for link reset to also being time based.
I.e., we don't reset the link until the link tolerance time is passed
AND we have made 100 retransmissions attempts.
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jianbo Liu says:

====================
Introduce matching on double vlan/QinQ headers for TC flower

Currently TC flower supports only one vlan tag, it doesn't match on both outer
and inner vlan headers for QinQ. To do this, we add support to get both outer
and inner vlan headers for flow dissector, and then TC flower do matching on
those information.

We also plan to extend TC command to support this feature. We add new
cvlan_id/cvlan_prio/cvlan_ethtype keywords for inner vlan header. The existing
vlan_id/vlan_prio/vlan_ethtype are for outer vlan header, and vlan_ethtype must
be 802.1q or 802.1ad.

The examples for command and output are as the following.
        flower vlan_id 1000 vlan_ethtype 802.1q \
        cvlan_id 100 cvlan_ethtype ipv4 \
        action vlan pop \
        action vlan pop \
        action mirred egress redirect dev ens1f1_0

filter protocol 802.1ad pref 33 flower chain 0
filter protocol 802.1ad pref 33 flower chain 0 handle 0x1
  vlan_id 1000
  vlan_ethtype 802.1Q
  cvlan_id 100
  cvlan_ethtype ip
  eth_type ipv4
  in_hw
    ...

v2:
  fix sparse warning.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As support dissecting of QinQ inner and outer vlan headers, user can
add rules to match on QinQ vlan headers.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the encapsulated ethertype is not dumped as it's the same as
TCA_FLOWER_KEY_ETH_TYPE keyvalue. But the dumping result is inconsistent
with input, we add dumping it with TCA_FLOWER_KEY_VLAN_ETH_TYPE.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dissect the QinQ packets to get both outer and inner vlan information,
then store to the extended flow keys.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As flow dissector stores vlan ethertype, tc flower now can match on that.
It is to make preparation for supporting QinQ.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>