Reported-by: NRodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This allows per-DAI initialisation to be done by the CPU DAI drivers.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Ensure that DAIs are prototyped in the codec drivers that define them.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ASoC codec drivers frequently set the register cache size using sizeof()
rather than ARRAY_SIZE(). For tlv320aicx either is correct since the
registers are 8 bit but update to use ARRAY_SIZE() for clarity.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The register cache size is used by the codec_reg sysfs file which works in
terms of the register cache access functions rather than in terms of raw
access to the cache so the size specified needs to be in terms of the
number of elements.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The register cache size is used by the codec_reg sysfs file which works in
terms of the register cache access functions rather than in terms of raw
access to the cache so the size specified needs to be in terms of the
number of elements.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch converts the Opti93x driver to use
the cs4231 library instead of duplicating the code.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds support for WSS compatible Opti93x
codec to the cs4231-lib.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The pending IRQ handling is a very hackish workaround and should be
avoided as much as possible via a larger bdl_pos_adj option value.
Put a warning message if this situation occurs so that the user may have
a chance to notice that something is wrong.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a brief description of the new bdl_pos_adj option to
ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ATI SB controllers seem to report the DMA ahead in the amount of FIFO.
Thus bdl_pos_adj should be 32 for them as default.

Also, the default value is set to -1, which means to make the driver
to choose the appropriate value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The option bdl_pos_adj should be provided for each card instance instead of
a global one because the value depends rather on each controller-chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

position_fix=3 is the option to correct the DMA position with the
FIFO size.  But, it never worked correctly, and we have now more other
workarounds for the DMA position fixes.  Thus better to remove it.

Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role
better.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup
timing.

Most HD-audio hardwares have a problem that a BDL IRQ is issued before
actually the data and the DMA pointer are updated.
We have already a mechanism to force to delay snd_pcm_period_elapsed()
calls via workq, but this costs much CPU, and typically the delay is
within one sample.  Thus, it's more clever to adjust the BDL entries
instead.

The new option adds the size of the delay in frames.  As default,
it's set to 1 -- that is, one sample delay.  Even the hardware is
really correct, one sample delay is relatively harmless in comparison
with reporting wrong positions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch contains the following cleanups:
- make the following needlessly global functions static:
  - dmasound_core.c: get_afmt_string()
  - dmasound_paula.c: dmasound_paula_init()
  - dmasound_q40.c: dmasound_q40_init()
- remove the following unused global variable:
  - dmasound_core.c: software_input_volume
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the missing GFP_ATOMIC to page_alloc when called with GFP_DMA.
GFP_KERNEL often results in stalls for ZONE_DMA, so GFP_ATOMIC is more
prgmatic.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

I have Toshiba dynabook SS RX1 and this patch adds that support.
Signed-off-by: NAkio Idehara <zbe64533@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch fixes silenced output from the Opti930.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The power_save option was set as boot although it was meant to be a
timeout value like the same option of snd-hda-intel originally.
Now fixed to the same style.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds support for Master Left Inv Switch on wm9711.
At least required to drive the mono speaker on the PXA270 platfrom
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch makes the needlessly global snd_dbri_proc() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since USB_EHCI_SPLIT_ISO is now unconditionally enabled the
#ifndef CONFIG_USB_EHCI_SPLIT_ISO became wrong.
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After the removal of the sequencer instrument layer SND_GUS_SYNTH was
no longer used.
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Attached is a revised version of my patch to add AT32 to ASoC.  This cleans
most of the style issues associated with the previous patch.  Also fixes an
issue with the playpaq_wm8510.c code depending on a non-released patch to th
AT32 portmux support.

Patch is against 2.6.24.3.atmel.3 kernel, the latest AVR32 kernel Atmel has
released, with the linux-2.6-asoc patches from when v2.6.24 was tagged also
applied.

[Fixed up minor checkpatch issues and updated for current kernels -- broonie]
Signed-off-by: NGeoffrey Wossum <gwossum@acm.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The WM8990 is a highly integrated ultra-low power hi-fi codec designed
for handsets rich in multimedia features such as mobile TV, digital
audio playback and gaming.

The bulk of this driver was written by Liam Girdwood with some
additional development and updates for new ASoC APIs by me.
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The WM8510 is a mono CODEC with speaker driver optimised for telephony
applications, featuring:
 - 16/20/24/32 bit audio at data rates between 8kHz and 48kHz
 - On-chip PLL
 - Dual microphone inputs

This driver was originally written by Liam Girdwood with updates from
Brett Saunders, Geoffrey Wossum and myself.
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NBrett Saunders <breton.saunders@ntlworld.com>
Signed-off-by: NGeoffrey Wossum <geoffrey@pager.net>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make the hw volume buttons work correctly on some HP OmniBook laptops.
The original quirk was apparently applied a bit too early and it was
also lacking some critial register writes. This improved sequence was
discovered by trial and error (like the original sequence). Tested and
found working on OB500 and OB6000 laptops.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It turned out that some ICH9-based boards use SD3 for the audio codec
where the current driver code doesn't probe.  Since we have a better
codec slot check now, it must be safe to increase this to 4.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On some Realtek codecs, the analog PLL gating control bit must be set
off while the default value is 1.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These two motherboards's pin configuration are not covered by driver.
I wrote a new model to support them.
Signed-off-by: NJiang zhe <zhe.jiang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

On Audigy2 Platinum, the Analog/Digital mixer switch is inverted.
	https://bugzilla.novell.com/show_bug.cgi?id=396204

The patch adds a simple workaround.

There might be another device requiring a similar fix, too (or fix for
audigy2 generically), but right now I fix only the known broken one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Simplify the page allocation of emu10k1 driver for emux synth support.
Since these pages aren't be necessarily coherent, we can avoid
expensive DMA-coherent routines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unneeded sort in sound/isa/sb/Makefile.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed unnecessary dependencies, fix a wrong selection, and
make CONFIG_SOUND_OSS menuconfig to simplify.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up the unused synth codes in the memory handling of trident driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ak4531 module is used only by ens1370 driver (and unlikely that
any other will use it ever).  Let's make it local to ens1370.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The UDA1380 codec is used by the HTC Magician and a number of Samsung
reference boards.

This driver has had a long out of tree history, having originally been
written by Giorgio Padrin and converted to ASoC by Richard Purdie.
Since conversion to ASoC most of the work on the driver has been done by
Philipp Zabel with some review and updates for new APIs by Liam Girdwood
and Mark Brown.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>